N010-0510-T303 [FUJITSU]
Resistive Touch Panel Specification FID-550 7-Wire Series;
| 型号： | N010-0510-T303 |
| 厂家： | 
FUJITSU |
| 描述： | Resistive Touch Panel Specification FID-550 7-Wire Series |
| 文件： | 总7页 (文件大小：570K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
STANDARD
Resistive Touch Panel Specification
FID-550 7-Wire Series
RoHS compliant
Panel Drive
change over
switch
MCU
Input Panel
Interface
Control
Section
A/D con-
verter
Noise Filter
n
FEATURES
• Superior long life, using a unique construction method offering improved life over typical
technologies; by sensing data input only on the glass layer, typically a 10x improvement in
product life is achived.
• Excellent specification and high quality
- Anti-Newton ring technology
- High reliability materials
• Pen/Finger, Pen Only, Finger Only,
Light Touch types available
• Transparency 80% - typical
• RoHS Compliant
n
PART NUMBERS
Touch Panels:
Part Number
Size
Type
Part Number
Size
Type
N010-0510-T303 17.0”
N010-0510-T304 17.0”
N010-0510-T236 15.0”
N010-0510-T219 15.0”
N010-0550-T717 12.1”
N010-0551-T742 12.1”
Pen/Finger
Pen/Finger
Pen/Finger
Pen/Finger
Pen/Finger
Pen/Finger
N010-0551-T744 12.1” Pen/Finger
N010-0550-T603 10.4” Pen only
N010-0550-T613 10.4” Pen/Finger
N010-0550-T625 10.4” Pen/Finger (light touch type)
N010-0550-T627 10.4” Pen/Finger (light touch type) 100mm tail
N010-0550-T345 8.4” Pen/Finger
n
PART NUMBERS
n
PART NUMBERS
Interface Controller Chips:
Controller Boards:
Part Number
Type
Part Number
Type
N16B-0558-B280
N16B-0558-B740
7-Wire, RS232
7-Wire, USB
N010-0559-V026
NC41120-0017
7-Wire, RS232
7-Wire, USB
FID-550 SERIES
n
DIMENSION EXAMPLE (10.4” SHOWN)
46.20 2.0
3.50 1.0
243.80
236.80
217.10 (transparent area)
215.10
213.10 (input area)
123.75
(3.50)
(11.50)
(12.50)
(13.50)
(24.30)
15.20 1.0
16.20
17.20
24.30 1.0
48.80 1.0
Top
(8.00)
Right
Left
Unit: mm
Bottom
n
n
DETAILED SPECIFICATION
1.0 APPLICATION
This specification applies to the standard FID-550 series Touch Panel (Pen/Finger type).
n
2.0 ADDITIONAL APPLICATIONS
Complete specification document is available upon request for customers with whom we have an approved NDA
in place.
n
3.0 DISCRIPTION AND BLOCK DIAGRAM
This panel in combination with a control IC chip is used to transfer the co-ordinates of the touched position to
the host system (see block diagram above).
n
4.0 DRAWING (Please see the diagram above.)
A
Definitions of the major dimensions indicated on this diagram:
B
Effective Input Area (A)
Area guaranteed to meet all the
characteristics detailed in this specification
View / Transparent Area (B) The area inside the adhesive zone
or electrode pattern.
C
Anti-input Area (C)
An insulating area allowed to protect
the touch panel from giving false
readings when an enclosure touches
the panel.
Force
n
n
5.0 CHARACTERISTICS
5.1 MECHANICAL
Operating Force
0.05~0.49 N (5 ~ 50gF) Measured with
a Silicon Measurement Rod R 8
(Round type 8mm) Silicon Rubber
Hardness 60˚C
Hardness of Surface Pencil hardness 3H minimum against
specification JIS K-5400
Silicon Rubber Rod
n
5.2 OPTICAL
Transparency
78% min measured in the effective input area to JIS K 7105 using a
MURAKAMI SHIKISAI KENKYUSHO type IIR 100 meter. Typically 80%.
5% measured in the effective input area using a MURAKAMI
SHIKISAI KENKYUSHO type IIR 100 meter with an Anti Glare treated
surface.
Haze
2
FID-550 SERIES
n
5.3 ELECTRICAL
Location Accuracy:
Linearity:
±2.5mm Measured over 9 points (See note 1)
1.5%
Current Consumption:
20mA max at DC 5V when applying 5VDC between pins 3 & 5
Switch Bounce (Chattering): 10ms min when using the silicon rubber measurement rod.
Insulation resistance:
10MΩ minimum at 25KV DC applied between pins 3 & 7 or
between 5 and 7
Dielectric Strength:
25KV DC for 1 minute
Note 1:
Measurement condition of linearity is corrected within the
control IC. In general the location accuracy is specified
as follows:
Actual co-ordinate point - theoretical co-ordinate point
= location accuracy.
Theoretical
Error
In general a 9 point co-ordinate calibration system is used
to adjust the micro controller accuracy. (20 point can be
used in combination with an EEPROM design).
Note 2:
Actual
Distance
Pins 3, 5 and 7 are the glass and film connection points.
n
5.4 ENVIRONMENTAL
Operating Temperature (*):
Storage Temperature:
Operating Humidity:
Storage Humidity:
-5˚C to 60˚C
-30˚C to 70˚C
20% to 90% RH with a Maximum wet bulb temperature of 38˚C
10% ~ 90% RH with a Maximum wet bulb temperature of 38˚C
Coating with the following chemicals and storing at room temperature for 2
hours gives no problems. 10% NaCl-water solution, ethyl-acetate, ethyl-
alcohol, toluene, methyl-ethyl-ketone.
Chemical Resistance:
n
5.5 PEN LIFE
Character Writing life:
Touch Input life :
Note 1:
1,000,000 words minimum
10,000,000 times minimum
Effective input area
Words are written in the notes area and the size of the word is
7.5mm x 6.75mm. A word is any Alphabet / Number / Mark.
The pen is as shown below and applies a force of 250g.
A failure is judged to happen when the current consumption or
insulation resistance or dielectric strength are not met as
shown in 5.3. The location accuracy with 9 point calibration
must be ±4.4 mm max.
Notes
9 mm
9.0
1.0
3.0
1.5
3.5
110.0±1.0
3
FID-550 SERIES
n
5.6 FINGER LIFE
A finger is simulated by a silicon rubber plunger
R8 (Round type 8mm size) hardness 60˚C at 200g
at frequency 5Hz.
A failure is judged to happen when the current
consumption or insulation resistance or dielectric
strength are not met as shown in 5.3. The location
accuracy with 9 point calibration must be ±4.4 mm max.
Typical operating force is 150g max.
n
5.7 INFORMATION ON THE PANEL
The panel part number is visible from the film side
The production information is visible from the glass side.
Production year 99 00 etc.
1 2 3 4 5 6 7 8 9 X Y Z or 1 2 3 4 5 6 7 8 9 X Y Z
January Production
February Production
December Production
2 3 4 5 6 7 8 9 X Y Z or 2 3 4 5 6 7 8 9 X Y Z
Z or 1 2 3 4 5 6 7 8 9 Y Z
n
n
6 PACKAGING
6.1 PACKING SPECIFICATION
Vibration:
10~55 Hz at 1 Octave per minute 10G 20 cycles with one side 0.75mm
Drop test:
60cm Drop 1 corner, 3 crease lines and 6 faces. 1 each 1 time
After the test no glass: flaw or crack is seen, and no dent or scratch on the film.
Also glass and film must not separate.
n
6.1 PACKING DETAILS
Each touch panel is placed into a plastic bag and is
held in place by a slit cut into the side of the card-
board. A second insertion piece is placed into the
carton to again add stability. The qty is written on
the side of the box. For example the T611 has 26
pieces per box.
Insert
Touch panel with bag
Slit in cardboard
4
FID-550 SERIES
n
7.0 REJECT CRITERIA
Description
Reject Criteria
Area ≥ 0.1mm2
: to be zero
: to be max. 5 points
: none specified
Film Dent
Area ≥ 0.05mm2 & area < 0.1mm2
Area < 0.05mm2
Area > 0.1mm2
: to be zero
: to be max. 5 points
: none specified
Dot type Area ≥ 0.05mm2 & area < 0.1mm2
Area < 0.05mm2
Foreign
material
between
glass and film
Area > 0.1mm
: to be zero
Line type Area ≥ 0.03mm & width <0.1mm and length < 10mm : to be max. 1 point
Area < 0.05mm
: none specified
Area ≥ 0.1mm
: to be zero
Scratch
Area ≥ 0.03mm & width <0.1mm with length < 80mm : to be max. 1 point
Area < 0.03mm & width <0.1mm with length < 30mm : none specified
Area ≥ 0.5mm2
: to be zero
: to be max. 5 points
: none specified
Dot blur or hard coat
missing
Area ≥ 0.03mm2 & area < 0.5mm2
Area < 0.05mm2
These must not be seen from Panel film side under a fluorescent lamp (3
wavelength type lamp). Not to be verified form glass side.
Newton Ring
Glass flaw
To be no flaw which is bigger than that shown in the following diagram. The
number of flaws is not specified.
3mm
5mm
2mm
2mm
n
8.0 GENERAL POINTS OF CAUTION
Touch panels are made of glass, so care must be taken in handling them. Do not stress, pile, bend, lift by
the cable or put any stress on the film, for example moving by film face vacuum. In order to clean wring dry a
cloth which has been emersed in a natural detergent. DO NOT use any organic solvent, acid or alkali solu-
tion. Watch the edge of the panel when cleaning, again for safety reasons.
5
FID-550 SERIES
n
9.0 CONNECTION AND MOUNTING
The details below indicate the recommended mounting structure for panel and enclosure. The enclosure sup-
port to fix the touch panel must be over 1.0mm I width and must be outside the view (Transparent area). Also
ensure that the enclosure does not cause miss input by touching the view area.
The following diagram shows that the enclosure edge must be between the View area and the guaranteed ac-
tive area. Ensure space is allocated for the diodes, and we recommend that the material to fix the panel and
enclosure is elastic. Special design would be required to stop water ingress. The corners of the touch panel
are conductive so do not touch any metal parts after mounting.
Top View (Picture, with conductive
side down)
Location
Detect
1.
2.
3.
4.
5.
6.
7.
Right/ Upper
Right/ Upper
Each side
Left/ Lower
Each side
Glass
Glass
Glass
Glass
Glass
Glass
0.7
3.35
Stiffener Board
Left/ Lower
All
Film
Laminate Film
Conductive Face
FPC-type cable
Contact Section View
Bottom View (Drawing, with conductive side up)
(Mating connector type FCI or equivalent SFW15R-1STAE1-LF: for FPC)
Transparent Area
Anti-input Area
0.8 mm min.
Cut-out / avoidance of
550 surface mount diodes
Input Area
Upper Case
Shock absorber to protect
the panel (eg rubber)
Input Panel
Wiring Area
1.0 to 3.0 mm
View Area
Shock absorber
for protection
LCD
Connector
Circuit Board
6
FID-550 SERIES
n
10.0 PANEL THICKNESS
Stiffener Board
Conductive Face
Thickness of glass 1.1mm
Fujitsu Components International Headquarter Offices
Japan
Europe
Fujitsu Component Limited
Gotanda-Chuo Building
3-5, Higashigotanda 2-chome, Shinagawa-ku
Tokyo 141 8630, Japan
Tel: (81-3) 5449-7010
Fujitsu Components Europe B.V.
Diamantlaan 25
2132 WV Hoofddorp
Netherlands
Tel: (31-23) 5560910
Fax: (81-3) 5449-2626
Email: promothq@fcl.fujitsu.com
Web: www.fcl.fujitsu.com
Fax: (31-23) 5560950
Email: info@fceu.fujitsu.com
Web: emea.fujitsu.com/components/
North and South America
Fujitsu Components America, Inc.
250 E. Caribbean Drive
Sunnyvale, CA 94089 U.S.A.
Tel: (1-408) 745-4900
Asia Pacific
Fujitsu Components Asia Ltd.
102E Pasir Panjang Road
#01-01 Citilink Warehouse Complex
Singapore 118529
Fax: (1-408) 745-4970
Tel: (65) 6375-8560
Email: components@us.fujitsu.com
Web: http://us.fujitsu.com/components/
Fax: (65) 6273-3021
Email: fcal@fcal.fujitsu.com
Web: http://www.fujitsu.com/sg/services/micro/components/
©2007 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective
owners.
Fujitsu Components America or its affiliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our
products Fujitsu Components America, Inc. or its affiliates reserve the right to change specifications/datasheets without prior notice.
Rev. May 30, 2007.
7
相关型号：
©2020 ICPDF网 联系我们和版权申明