SY-3-K-UL-OH [FUJITSU]

Power/Signal Relay;
SY-3-K-UL-OH
型号: SY-3-K-UL-OH
厂家: FUJITSU    FUJITSU
描述:

Power/Signal Relay

继电器
文件: 总8页 (文件大小:179K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
MINIATURE RELAY  
1 POLE - 1 to 2 A (For Signal Switching)  
SY Series  
n FEATURES  
l Very small size and light weight  
l UL, CSA recognized  
l Conforms to FCC rules and regulations part 68  
- Dielectric strength 1000 VAC between coil and contacts  
- Surge strength 1500 V  
l High sensitivity  
l Wide ambient temperature range (-30˚C to +90˚C)  
l Wide operating range  
l DIL pitch terminals  
l Plastic sealed type  
l RoHS compliant.  
Please see page 7 for more information  
n PARTNUMBER INFORMATION  
SY  
- 12  
W - K - UL  
[Example]  
(a)  
(b) (c)  
(d) (e)  
(a)  
(b)  
Relay type  
SY  
: SY-Series  
Coil rated voltage  
12  
: 1.5.....24 VDC  
Coil rating table at page 3  
(c)  
Contact style  
Nil  
W
: Single type  
: Bifurcated type  
(d)  
(e)  
Enclosure  
Approvals  
K
: Plastic sealed type  
Nil  
UL  
: No UL/CSA marking on relay  
: UL, CSA marking on relay  
Note: For movable and stationary contact with gold overlay type, add suffix “–OH”  
1
SY SERIES  
n SPECIFICATION  
Item  
Single type  
SY - ( ) - K  
Bifurcated type  
SY - ( ) W - K  
Contact Data Configuration  
Construction  
1 form C (SPDT)  
Single (cross bar)  
Gold overlay silver palladium  
Max. 100 mΩ at 1 A, 6 VDC  
0.5A, 120VAC or 1A, 24VDC  
2A  
Bifurcated (cross bar)  
Material  
Resistance (initial)  
Contact rating (resistive)  
Max. carrying current  
Max. switching voltage  
Max. switching power  
Max. switching current  
Min. switching load *  
120VAC / 60VDC  
60AV / 24W  
1A  
1 mA, 1VDC  
0.1 mA, 100mVDC  
Approximately 1.4 pF (between open contacts)  
Approximately 5.0 pF (between coil and contacts)  
Capacitance (at 10 MHz)  
Life  
Mechanical  
Min. 5 x 106 operations  
Min. 100 x 103 operations  
150 to 175 mW  
Electrical (at contact rating)  
Rated power  
Coil Data  
Operate power  
75 to 86 mW  
-30 °C to +90 °C (no frost)  
(18V coil: +85 °C, 24V coil: +80 °C)  
Operating temperature range  
Timing Data Operate (at nominal voltage)  
Max. 5 ms  
Max. 2 ms  
Release (at nominal voltage)  
Insulation  
Min. 1,000MOhm at  
Min. 1,000MΩ at 500VDC  
250VDC  
Resistance (initial)  
Open contacts  
400VAC, 1min  
300VAC, 1min  
Dielectric strength  
Surge strength  
Contacts to coil  
Coil to contacts  
Misoperation  
Endurance  
1,000VAC, 1min  
1,500V/ 10 x 160µs standard wave  
10 to 55Hz double amplitude 1.5mm  
10 to 55Hz double amplitude 1.5mm  
300m/s² (11 ± 1ms)  
Other  
Vibration resistance  
Misoperation  
Endurance  
Shock  
1,000m/s² (6 ± 1ms)  
Weight  
Approximately 1.7 g  
* Minimum switching loads mentioned above are reference values. Please perform the confirmation test with actual  
load before production since reference values may vary according to switching frequencies, environmental conditions  
and expected reliability levels.  
2
SY SERIES  
n COIL RATING  
Rated Coil  
Voltage  
(VDC)  
Must Operate  
Voltage  
Must Release  
Voltage  
Coil  
Code  
Coil Resistance  
+/- 10% (Ohm)  
Rated Power  
(mW)  
(VDC) *  
(VDC) *  
1.5  
3
1.5  
3
15  
60  
1.05  
2.1  
0.08  
0.15  
0.23  
0.25  
0.3  
4.5  
5
4.5  
5
135  
167  
240  
540  
960  
1,940  
3,290  
3.2  
150  
3.5  
6
6
4.2  
9
9
6.3  
0.45  
0.6  
12  
18  
24  
12  
18  
24  
8.4  
12.6  
16.8  
0.9  
170  
175  
1.2  
Note: All values in the table are valid for 20°C and zero contact current.  
* Specified operate values are valid for pulse wave voltage.  
n SAFETY STANDARDS  
Type  
UL  
Compliance  
Contact rating  
UL 478  
Flammability: UL 94-V0 (plastics)  
UL 508  
0.5A, 120VAC (resistive)  
1A, 30VDC (resistive)  
0.15A, 48VDC (resistive)  
E 45026  
CSA  
C22.2 No. 14  
LR 35579  
3
SY SERIES  
n CHARACTERISTIC DATA  
4
SY SERIES  
5
SY SERIES  
n DIMENSIONS  
l
PC board mounting  
hole layout  
l
Schematics  
(BOTTOM VIEW)  
l
Dimensions  
(BOTTOM VIEW)  
Unit: mm  
6
SY SERIES  
RoHS Compliance and Lead Free Information  
1. General Information  
l
l
l
l
All signal and power relays produced by Fujitsu Components are compliant with RoHS directive 2002/95EC including  
amendments.  
Cadmium as used in electrical contacts is exempted from the RoHS directives on October 21st, 2005.  
(Amendment to Directive 2002/95/EC)  
All of our signal and power relays are lead-free. Please refer to Lead-Free Status Info for older date codes  
at: http://www.fujitsu.com/us/downloads/MICRO/fcai/relays/lead-free-letter.pdf  
Lead free solder plating on relay terminals is Sn-3.0Ag-0.5Cu, unless otherwise specified.  
This material has been verified to be compatible with PbSn assembly process.  
2. Recommended Lead Free Solder Profile  
l
Recommended solder Sn-3.0Ag-0.5Cu.  
Flow Solder condition:  
Pre-heating:  
Soldering:  
maximum 120˚C  
dip within 5 sec. at  
260˚C solder bath  
Solder by Soldering Iron:  
Soldering Iron  
Temperature:  
Duration:  
maximum 360˚C  
maximum 3 sec.  
We highly recommend that you confirm your actual solder conditions  
3. Moisture Sensitivity  
l
Moisture Sensitivity Level standard is not applicable to electromechanical relays, unless otherwise indicated.  
4. Tin Whiskers  
l
Dipped SnAgCu solder is known as presenting a low risk to tin whisker development. No considerable length  
whisker was found by our in house test.  
7
SY SERIES  
Fujitsu Components International Headquarter Offices  
Japan  
Europe  
Fujitsu Component Limited  
Gotanda-Chuo Building  
3-5, Higashigotanda 2-chome, Shinagawa-ku  
Tokyo 141, Japan  
Fujitsu Components Europe B.V.  
Diamantlaan 25  
2132 WV Hoofddorp  
Netherlands  
Tel: (81-3) 5449-7010  
Tel: (31-23) 5560910  
Fax: (81-3) 5449-2626  
Email: promothq@ft.ed.fujitsu.com  
Web: www.fcl.fujitsu.com  
Fax: (31-23) 5560950  
Email: info@fceu.fujitsu.com  
Web: emea.fujitsu.com/components/  
North and South America  
Fujitsu Components America, Inc.  
250 E. Caribbean Drive  
Asia Pacific  
Fujitsu Components Asia Ltd.  
102E Pasir Panjang Road  
Sunnyvale, CA 94089 U.S.A.  
Tel: (1-408) 745-4900  
#01-01 Citilink Warehouse Complex  
Singapore 118529  
Fax: (1-408) 745-4970  
Tel: (65) 6375-8560  
Email: components@us.fujitsu.com  
Web: http://us.fujitsu.com/components  
Fax: (65) 6273-3021  
Email: fcal@fcal.fujitsu.com  
Web: http://www.fujitsu.com/sg/services/micro/components/  
©2012 Fujitsu Components Europe B.V. All rights reserved. All trademarks or registered trademarks are the property of their respective owners.  
The contents, data and information in this datasheet are provided by Fujitsu Component Ltd. as a service only to its user and only for general  
information purposes.  
The use of the contents, data and information provided in this datasheet is at the users’ own risk.  
Fujitsu has assembled this datasheet with care and will endeavor to keep the contents, data and information correct, accurate, comprehensive,  
complete and up to date.  
Fujitsu Components Europe B.V. and affiliated companies do however not accept any responsibility or liability on their behalf, nor on behalf of its  
employees, for any loss or damage, direct, indirect or consequential, with respect to this datasheet, its contents, data, and information and related  
graphics and the correctness, reliability, accuracy, comprehensiveness, usefulness, availability and completeness thereof.  
Nor do Fujitsu Components Europe B.V. and affiliated companies accept on their behalf, nor on behalf of its employees, any responsibility or liability  
for any representation or warrant of any kind, express or implied, including warranties of any kind for merchantability or fitness for particular use,  
with respect to these datasheets, its contents, data, information and related graphics and the correctness, reliability, accuracy, comprehensiveness,  
usefulness, availability and completeness thereof. Rev. July 30, 2012  
8

相关型号:

SY-3W-K

Power/Signal Relay, SPDT, Momentary, 0.05A (Coil), 3VDC (Coil), 150mW (Coil), 1A (Contact), 24VDC (Contact), DC Input, AC/DC Output, Through Hole-Straight Mount, ROHS COMPLIANT
FUJITSU

SY-3W-K-OH

Power/Signal Relay
FUJITSU

SY-3W-K-UL

Power/Signal Relay
FUJITSU

SY-3W-K-UL-OH

Power/Signal Relay
FUJITSU

SY-4.5-K

Power/Signal Relay, SPDT, Momentary, 0.033A (Coil), 4.5VDC (Coil), 150mW (Coil), 1A (Contact), 24VDC (Contact), DC Input, AC/DC Output, Through Hole-Straight Mount, ROHS COMPLIANT
FUJITSU

SY-4.5W-K

POWER/SIGNAL RELAY, SPDT, MOMENTARY, 0.033A (COIL), 4.5VDC (COIL), 150mW (COIL), 1A (CONTACT), 60VDC (CONTACT), THROUGH HOLE-STRAIGHT MOUNT, ROHS COMPLIANT
FUJITSU

SY-4.5W-K-OH

POWER/SIGNAL RELAY
FUJITSU

SY-5-K

Power/Signal Relay, SPDT, Momentary, 0.03A (Coil), 5VDC (Coil), 150mW (Coil), 1A (Contact), 24VDC (Contact), DC Input, AC/DC Output, Through Hole-Straight Mount, ROHS COMPLIANT
FUJITSU

SY-5-K-OH

Power/Signal Relay
FUJITSU

SY-5-K-UL

Power/Signal Relay
FUJITSU

SY-5-K-UL-OH

Power/Signal Relay
FUJITSU

SY-5W-K

POWER/SIGNAL RELAY, SPDT, MOMENTARY, 0.03A (COIL), 5VDC (COIL), 150mW (COIL), 1A (CONTACT), 60VDC (CONTACT), THROUGH HOLE-STRAIGHT MOUNT, ROHS COMPLIANT
FUJITSU