UM1-18W-K [FUJITSU]
RF RELAY, SPDT, MOMENTARY, 0.011A (COIL), 18VDC (COIL), 200mW (COIL), 0.1A (CONTACT), 30VDC (CONTACT), 900MHz, THROUGH HOLE-STRAIGHT MOUNT, ROHS COMPLIANT;型号: | UM1-18W-K |
厂家: | FUJITSU |
描述: | RF RELAY, SPDT, MOMENTARY, 0.011A (COIL), 18VDC (COIL), 200mW (COIL), 0.1A (CONTACT), 30VDC (CONTACT), 900MHz, THROUGH HOLE-STRAIGHT MOUNT, ROHS COMPLIANT 光电二极管 继电器 |
文件: | 总8页 (文件大小:423K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MINIATURE RELAY
1 POLE, 0.5A
(HIGH FREQUENCE SIGNAL SWITCHING)
UM1 SERIES
RoHS Compliant
n
FEAURES
l Submpolarized relay
l Exgh frequency characteristics
at 900 MHz
—Isn
—Insertion ss : ax. 1 dB
—V.S.W.R.
: min. 60 dB
(Impedance of
the measuring
devices is 75Ω)
}
: ax. 1.2
l High reliability— Burced contacts
— Movble contact: gold overlay
— Statonary gold clad
l Wide operating range
l DIL pitch terminals
l Plastic sealed type
l Latching type available
l RoHS compliant since date code: 043T2
Please see page 7 for more information
n ORDERING INFORMATION
UM1
L
–
D
12
W
–
K
[Example]
(a) (b)
(c) (d) (e)
(f)
(a)
(b)
Series Name
UM1: UM1 Series
Operation Function
Nil : Standard type
L : Latching type
(c)
Number of Coil
Nil : Single winding type
D : Double winding type
(d)
(e)
(f)
Nominal Voltage
Contact
Refer to the COIL DATA CHART
W : Bifurcated type (cross bar)
K : Plastic sealed type
Enclosure
n SPECIFICATIONS
Standard Type
UM1-( ) W-K
Single Winding Latching Type Double Winding Latching Type
Item
UM1L-( ) W-K
UM1L-D ( ) W-K
Contact
Arrangement
1 form C (SPDT)
Material
Gold clad (stationary contact), gold plate (movable contact)
Style
Bifurcated (cross bar)
Resistance (initial)
Rating (resistive)
Maximum 100 mΩ
10 mA 24 VDC 1 W (at 900 MHz)
Mximum Carrying Current
Maximm Switching Power
Maximm Swhing Voltage
Maximum witching Current
Minimum Switchin
Isolation
0.5 A
1 W (DC) 10 W (at 900 MHz)
30 VDC
100 mA
0.01 mA 10 mVDC
Excellent
High
inimum 60 dB (at 900 MHz), impedance of the measuring devices is 75Ω
Maxmum 1 dB (at 900 MHz), impedance of the measuring devices is 75Ω
aximum 1.2 (at 900 MHz), impedance of the measuring devices is 75Ω
Frequency
Insertion Loss
Character-
istics
Coil
V.S.W.R.
Nominal Power (at 20°C)
Operate Power (at 20°C)
Operating Temperature
200 to 20 mW
200 mW
100 mW
400 mW
10o 110 m
200 mW
–30°C to 80°C no rost)
–30°C to +60°C (no frost)
Time Value Operate (at nominal voltage) Maximum 6 s
Release (at nominal voltage) Maximum 5 ms
Maimum 6 ms (set)
aximum 6 ms (reset)
Life
Mechanical
Electrical
Vibration
1 × 106 operations minmum
3 × 105 operations minimum (at ninal load)
10 to 55 Hz (double amplitude f 3.3 mm)
10 to 55 Hz (double amplitude of 5.0 m
500 m/s2 (11 ±1 ms)
Other
Misoperation
Resistance Endurance
Shock Misoperation
Resistance Endurance
Weight
1,000 m/s2 ( 6 ±1 ms)
Approximately 4 g
1
*
Minimum switching loads mentioned above are reference values. Please perform the confirmation teith the actual load
before production since reference values may vary according to switching frequencies, environmental ctions and
expected reliability levels.
nINSULATION
Item
Standard
Single latch
Double latch
Isolation (initial)
Dielectric Strength
Minimum 1,000 MΩ (at 500VDC)
500VAC 1 min., (open contact / contact and shield terminals)
1,000VAC 1 min., (coil contact/ coil and shield terminals)
n COIL DATA CHART
Nominal
Coil resistance
(±10%)
Must operate
voltage*1
Must release
voltage*1
Nominal
power
MODEL
voltage
1.5 VDC
3 VDC
UM1- 1.5 W-K
UM1- 3 W-K
UM4.5 W-K
W-K
6 W
UM1- W-K
UM1- 12 W-K
UM1- 18 W-K
UM1- 24 W-K
UM1- 48 W-K
11.2Ω
45 Ω
+1.05 VDC
+2.1 VDC
+3.15 VDC
+3.5 VDC
+4.2 VDC
+6.3 VDC
+8.4 VDC
+12.6 VDC
+16.8 VDC
+33.6 VDC
+0.08 VDC
+0.15 VDC
+0.23 VDC
+0.25 VDC
+0.3 VDC
+0.45 VDC
+0.6 VDC
+0.9 VDC
+1.2 VDC
+2.4 VDC
200 mW
200 mW
200 mW
200 mW
200 mW
200 mW
200 mW
200 mW
200 mW
220 mW
4.5 VDC
5 VDC
101 Ω
125 Ω
6 VDC
180 Ω
9 VDC
405 Ω
12 VDC
18 VDC
24 C
720 Ω
1,620 Ω
2,880 Ω
10,472 Ω
Note: *1 Specified values are subjct to pse wave voltage.
All values in the table are measured at 0°C
Nominal
voltage
Coil resistance
(±10%)
Set
Reset
Nominal
power
MODEL
voltage*1
voltage*1
UM1L- 1.5 W-K
UM1L- 3 W-K
UM1L- 4.5 W-K
UM1L- 5 W-K
UM6 W-K
W-K
U12 K
UM1L- W-K
UM1L- 24 W-K
UM1L- 48 W-K
UM1L-D1.5 W-K
1.5 VDC
3 VDC
11.2Ω
45 Ω
+1.05 VDC
+2.1 VDC
+3.15 VDC
+3.5 VDC
+4.2 VDC
+6.3 VDC
+8.4 VDC
+12.6 VDC
+16.8 VDC
+33.6 VDC
+1.05 VDC
-1.05 VDC
-2.1 VDC
-3.15 VDC
-3.5 VDC
-4.2 VDC
-6.3 VDC
-8.4 VDC
-12.6 VDC
-16.8 VDC
-33.6 VDC
200 mW
200 mW
200 mW
200 mW
200 mW
200 mW
200 mW
200 mW
200 mW
200 mW
400 mW
4.5 VDC
5 VDC
101 Ω
125 Ω
6 VDC
180 Ω
9 VDC
405 Ω
12 VDC
18 VDC
4 VDC
48 VDC
1.
720 Ω
1,620 Ω
2,880 Ω
11,520 Ω
P
S
P
P
S
P
S
P
S
P
S
P
S
P
S
5.6Ω
5.6Ω
+1.05 VDC
+2.1 VDC
+3.15 VDC
+3.5 VDC
+4.2 VDC
VDC
4 VDC
+12.6 VDC
+16.8 VDC
+33.6 VDC
UM1L-D 3 W-K
UM1L-D4.5 W-K
UM1L-D 5 W-K
UM1L-D 6 W-K
UM1L-D 9 W-K
UM1L-D 12 W-K
UM1L-D 18 W-K
UM1L-D 24 W-K
UM1L-D 48 W-K
3 C
4.5 VDC
5 VDC
22.5Ω
2.5Ω
0.6Ω
50.6Ω
62Ω
62.5Ω
90 Ω
90 Ω
202.5Ω
202.5Ω
360 Ω
360 Ω
810 Ω
810 Ω
+2.1 VDC
+3.15 VDC
+3.5 VDC
+4.VDC
+6.3 VDC
+8.4 VDC
+12.6 VDC
+16.8 VDC
+33.6 VDC
400 mW
400 mW
400 mW
400 mW
400 mW
400 mW
400 mW
400 mW
400 mW
6 VDC
9 VDC
12 VDC
18 VDC
24 VDC
48 VDC
P 1,440 Ω
S 1,440 Ω
P 5,760 Ω
S 5,760 Ω
P: Primary coil S: Secondary coil
Note: *1 Specified values are subject to pulse wave voltage.
All values in the table are measured at 20°C.
n CHARACTERISTIC DATA
n REFERENCE DATA
nDIMENSIONS
l
Dimensions
l
Schemas
(Bottom view)
UM1, UM1L type (Non-latching type, single winding latching type)
l
PC board
mounting hole layout
(Bottom view)
UM1L-D type (Double winding latching type)
Unit: mm
RoHS Compliance and Lead Free Relay Information
1. General Information
l
Relays produced after the specific date code that is indicated on each data sheet are lead-free
now. All our signal and power relays are lead-free. Please refer to Lead-Free Status Info.
(http://www.fujitsu.com/us/downloads/MICRO/fcai/relays/lead-free-letter.pdf)
Lead frsolder plating currently used in relays is Sn-3.0Ag-0.5Cu. From February 2005 forward
Sn-3will be used for FTRB3 and FTR-B4 series relays.
All d power relays also comply with RoHS. Please refer to individual data
sheelaythat are RoHS compliant do not contain the 6 hazardous materials above the threshold level
that are resicted y RoHS directive (lead, mercury, cadmium, chromium IV, PBB, PBDE and DecaBDE).
It has been verifithat using lead-free relays in leaded assembly process will not cause any
problems (compable)
l
l
l
l
“LF” is marked on eaouter and inner carton. (No marking on individual relays).
2. Recommended Lee older Profile
l
Recommended solder paste Sn-3.0Ag-.5C.
Solder condition
Flow Solder condition:
Pre-heating:
Soldering:
maximum 120˚C
dip within 5 sec. at
260˚C solder bath
Solder by Soldering Iron:
Soldering Iron
Temperature: maximum 360˚C
Duration:
maximum 3 sec.
We highly recommend that you confirm your actual solder conditions
3. Moisture Sensitivity
l
Moisture Sensitivity Level standard is not applicable to electromechanical relays.
4. Tin Whisker
l
Dipped SnAgCu solder is known as low risk tin whisker. No considerable whisker length was found by our in
house test.
Fujitsu Components International Headquarter Offices
Japan
Europe
Fujitsu Component Limited
Gotanda-Chuo Building
3-5, Higashigotanda 2-chome, Shinagawa-ku
Tokyo 141, Japan
Fujitsu Components Europe B.V.
Diamantlaan 25
2132 WV Hoofddorp
Netherlands
Tel: (81-3) 5449-7010
Fax: (81-3) 5449-2626
Email: prhq@ft.ed.fujitsu.com
Web: witsu.com/en/
Tel: (31-23) 5560910
Fax: (31-23) 5560950
Email: info@fceu.fujitsu.com
Web: emea.fujitsu.com/components/
Nh Amrica
Asia Pacific
Funentmerica, Inc.
250 Eribbearive
Sunnyvale, CA 4089 S.A.
Tel: (1-408) -4900
Fujitsu Components Asia Ltd.
102E Pasir Panjang Road
#01-01 Citilink Warehouse Complex
Singapore 118529
Fax: (1-408) 745-4970
Tel: (65) 6375-8560
Email: componen@us.tsu.c
Web: http://www.fujitsom/uervices/edevices/components/
Fax: (65) 6273-3021
Email: fcal@fcal.fujitsu.com
Web: http://www.fujitsu.com/sg/services/micro/components/
©2008 Fujitsu Components Aerica, ts reserved. All trademarks or registered trademarks are the property of their respective
owners.
Fujitsu Components America or its affiliates do t wrrant hat the content of datasheet is error free. In a continuing effort to improve our
products Fujitsu Components America, Inc. or s afiatereseve the right to change specifications/datasheets without prior notice.
Rev. December 23, 2008.
相关型号:
UM1-24W-K
RF RELAY, SPDT, MOMENTARY, 0.008A (COIL), 24VDC (COIL), 200mW (COIL), 0.1A (CONTACT), 30VDC (CONTACT), 900MHz, THROUGH HOLE-STRAIGHT MOUNT, ROHS COMPLIANT
FUJITSU
UM1-3W-K
RF RELAY, SPDT, MOMENTARY, 0.067A (COIL), 3VDC (COIL), 200mW (COIL), 0.1A (CONTACT), 30VDC (CONTACT), 900MHz, THROUGH HOLE-STRAIGHT MOUNT, ROHS COMPLIANT
FUJITSU
UM1-5W-K
RF Relay, 1 Form C, SPDT, Momentary, 0.04A (Coil), 5VDC (Coil), 200mW (Coil), 0.1A (Contact), 30VDC (Contact), 900MHz, DC Input, Random, DC Output, Through Hole-Straight Mount, ROHS COMPLIANT
FUJITSU
UM1-9W-K
RF RELAY, SPDT, MOMENTARY, 0.022A (COIL), 9VDC (COIL), 200mW (COIL), 0.1A (CONTACT), 30VDC (CONTACT), 900MHz, THROUGH HOLE-STRAIGHT MOUNT, ROHS COMPLIANT
FUJITSU
©2020 ICPDF网 联系我们和版权申明