VC-3R0A23967B [FUJITSU]
ASSP for Mobile Telephone; ASSP移动电话
| 型号： | VC-3R0A23967B |
| 厂家： | 
FUJITSU |
| 描述： | ASSP for Mobile Telephone |
| 文件： | 总11页 (文件大小：101K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
FUJITSU MEDIA DEVICE
DATA SHEET
DS04-21712-1E
ASSP for Mobile Telephone
VCO (800 to 2000 MHz)
VC-23 Series
■ DESCRIPTION
With excellent C/N characteristics and low current consumption, this VCO series is suitable for use with AMPS,
CDMA and PCS and is ideal to miniaturize dual-band mode products. The VC-23 series can be used in any
frequency band in the 800 MHz to 2000 MHz range. The device utilizes FUJITSU MEDIA DEVICE’s high-frequency
design technology, high-density mounting technology, and frequency adjustment technology to provide a high
level of reliability in addition to high performance and small size.
■ FEATURES
• Superior noise characteristics (C/N, S/N)
• Frequency switching type
• High level of stability in response to ambient temperature and load variations
• FUJITSU MEDIA DEVICE’s proprietary fabrication process provides a uniform central frequency distribution
• Small size, light-weight, slim-package : 9.3 × 7.3 × 2.0 mm (Max.)
• SMD-type taping specifications suitable for automatic mounting and reflow soldering
■ PACKAGE
VC-23 Series
■ PIN ASSIGNMENT
(TOP VIEW)
6
5
4
7
8
1
2
3
■ PIN DESCRIPTION
Pin No.
Symbol
Vt
Description
1
2
3
4
5
6
7
8
Control voltage
GND
GND
VCC
Power supply voltage
Output
OUT
GND
VSW
GND
Band select
GND
GND
GND
GND
■ PRODUCT LINEUP (STANDARD MODELS)
Center Frequency
(MHz)
Band Width
Power Supply
Voltage (V)
System
Part Number
(MHz)
967
±13
VC-3R0A23-0967/
1750B
AMPS•CDMA/PCS
3.0 ± 0.15
1750
±30
2
VC-23 Series
■ ELECTRICAL CHARACTERISTICS
• Absolute Maximum Ratings
Rating
Parameter
Symbol
Unit
Min.
−0.6
−0.6
−0.6
−30
−30
5
Max.
Input DC voltage
VCC
Vt
+6.0
+6.0
+6.0
+80
+85
95
V
Control voltage
V
SW voltage
VSW
Ta
V
Operating temperature
Storage temperature
Storage humidity
°C
°C
%
Tstg
Hstg
WARNING: VCO can be permanently damaged by application of stress (voltage, temperature, humidity, etc.) in
excess of absolute maximum ratings. Do not exceed these ratings.
• Band Selection Mode
VSW (V)
Center Frequency Current Consumption
Band Width
Selection Mode
(MHz)
(mA) Typ.
Min.
0.0
Max.
0.15
3.0
CDMA
PCS
Band1
Band2
967
0.0
0.4
2.85
1750
3
VC-23 Series
• Electrical Charasteristics
Band1
(Ta = −30°C to +80°C)
Value
Typ.
Parameter
Current
consumption
SW current
Frequency
Frequency
Symbol
Conditions
Unit
Min.
Max.
ICC
VCC = 3.0 V, Vt = 1.5 V
10.0
mA
ISW
VCC = 3.0 V, Vt = 1.5 V
VCC = 3.0 V, Vt = 0.3 V
VCC = 3.0 V, Vt = 2.7 V
0.4
0.7
mA
fmin
fmax
954.0
MHz
MHz
980.0
18.0
−5.0
Control voltage
sensitivity
Svt
PO
(fmax − fmin) / 2.4
30.0
1.0
MHz/V
dBm
Oscillator output
VCC = 3.0 V, Vt = 1.5 V
VCC = 3.0 V, Vt = 1.5 V,
Offset = 0.3 kHz , BW = 1 Hz
−60.0
dBc/Hz
VCC = 3.0 V, Vt = 1.5 V,
Offset = 1 kHz , BW = 1 Hz
−70.0
−100.0
−110.0
−119.0
−120.0
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
VCC = 3.0 V, Vt = 1.5 V,
Offset = 10 kHz , BW = 1 Hz
C/N
C/N
VCC = 3.0 V, Vt = 1.5 V,
Offset = 30 kHz , BW = 1 Hz
VCC = 3.0 V, Vt = 1.5 V,
Offset = 60 kHz , BW = 1 Hz
VCC = 3.0 V, Vt = 1.5 V , BW = 1 Hz
Offset = 60 kHz (Ta = 25°C)
VCC = 3.0 V, Vt = 1.5 V,
Up to 3rd
Higher harmonics
Spurious
HS
−10.0
−80.0
±1000
dBc
dBc
kHz
SP
VCC = 3.0 V, Vt = 1.5 V
Power supply
variation
Push VCC = 3.0 V ± 0.15 V, Vt = 1.5 V
VCC = 3.0 V , Vt = 1.5 V,
Pull
Load variation
±1000
±3000
kHz
kHz
VSWR = 2, All phases
Temperature drift
Td
Ta = +25°C ± 55°C
4
VC-23 Series
Band2
(Ta = −30°C to +80°C)
Value
Parameter
Symbol
Conditions
Unit
Min.
Typ.
Max.
Current
consumption
ICC
VCC = 3.0 V, Vt = 1.5 V
10.0
mA
SW current
Frequency
Frequency
ISW
VCC = 3.0 V, Vt = 1.5 V
VCC = 3.0 V, Vt = 0.3 V
VCC = 3.0 V, Vt = 2.7 V
0.4
0.7
mA
fmin
fmax
1720.0
MHz
MHz
1780.0
30.0
Control voltage
sensitivity
Svt
PO
(fmax − fmin) / 2.4
50.0
1.0
MHz/V
dBm
Oscillator output
VCC = 3.0 V, Vt = 1.5 V
−5.0
VCC = 3.0 V, Vt = 1.5 V,
Offset = 0.3 kHz , BW = 1 Hz
−60.0
dBc/Hz
VCC = 3.0 V, Vt = 1.5 V,
Offset = 1 kHz , BW = 1 Hz
−70.0
−90.0
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
VCC = 3.0 V, Vt = 1.5 V,
Offset = 10 kHz , BW = 1 Hz
VCC = 3.0 V, Vt = 1.5 V,
Offset = 100 kHz , BW = 1 Hz
−115.0
−130.0
−138.0
−139.0
−141.0
C/N
C/N
VCC = 3.0 V, Vt = 1.5 V,
Offset = 625 kHz , BW = 1 Hz
VCC = 3.0 V, Vt = 1.5 V,
Offset = 1250 kHz , BW = 1 Hz
VCC = 3.0 V, Vt = 1.5 V , BW = 1 Hz
Offset = 1250 kHz (Ta = 25°C)
VCC = 3.0 V, Vt = 1.5 V,
Offset > 2000 kHz , BW = 1 Hz
VCC = 3.0 V, Vt = 1.5 V,
Up to 3rd
Higher harmonics
Spurious
PS
−10.0
−80.0
±1000
dBc
dBc
kHz
SP
VCC = 3.0 V, Vt = 1.5 V
Power supply
variation
Push VCC = 3.0 V ± 0.15 V, Vt = 1.5 V
VCC = 3.0 V , Vt = 1.5 V,
Pull
Load variation
±1000
±3000
kHz
kHz
VSWR = 2, All phases
Temperature drift
Td
Ta = +25°C ± 55°C
5
VC-23 Series
■ MARKING
6
5
4
Part symbol
Lot number
7
8
Logo
Index
1
2
3
■ PART NUMBER DESIGNATION
−
23 0967/1750
VC 3R0 A
B
Numbers Specified by FUJITSU MEDIA DEVICE
Band 1 : 967 MHz
Center Frequency
Band 2 : 1750 MHz
Series Name
: VC-23 Series
: SMD
Outer Sheath Type
Power Supply Voltage : 3.0 V
Product Category : VCO
6
VC-23 Series
■ PACKAGE DIMENSION
9.0−+00..23
5.8
2.8
2.0 Max.
1.0
1
6
2
5
3
4
7
8
Dimensions in mm
■ RECOMMENDED PATTERN FOR SOLDERING
5.8
2.8
1.0
6.8
8.0
10.6
Dimensions in mm
Dimension tolerance : ± 0.1 mm
7
VC-23 Series
■ TAPING AND PACKAGING
(1) Carrier Tape and Packaging
φ1.5 −+00.1
2.0 ± 0.1
4.0 ± 0.1
2.8 ± 0.1
φ1.5 −+00.1
0.3 ± 0.05
12.0 ± 0.1
7.4 ± 0.1
Dimensions in mm
(2) Taping Layout
Feeder
150 mm 360 mm
Direction of pulling
Reel side
Rulling side
Empty
Empty
Marking of pin 1
50 mm or more
1000 packages
400 mm or more
8
VC-23 Series
(3) Reel Shape and Dimensions
25.4 Max.
Label
3.0 ± 0.5
16.4 −+20.0
Note : The label specifies the part number, quantity, and lot number.
Volume : 1000 pcs/reel
Type : (L) 340 × (W) 340 × (t) 30 (mm)
Dimensions in mm
9
VC-23 Series
■ REFLOW MOUNTING CONDITIONS (RECOMMENDED)
• Perform mounting using the temperature profile shown below. To prevent thermal stress to the VCO, ensure
gentle temperature gradients and use preheating whenever possible. (Recommended preheating: 140°C to
160°C for 60 s ± 20 s)
• Always consult FUJITSU MEDIA DEVICE beforehand if mounting more than once.
• Never remove a VCO that has already been mounted and attempt to reuse.
• For mounting, use a general-purpose flux suitable for mounting electronic components.
7 s Max.
250
230 ± 10
2
200
1
20 s 30 s
160
150
140
60 s ± 20 s
100
50
Warm-up
Pre-heating
Time (s)
Heating
Cooling
0
1 : 10°C/s or less
2 : 8 °C/s or less
■ WASHING CONDITIONS
• Washing solution: Use isopropyl alcohol.
• Washing procedure: Immersion or steam cleaning is recommended.
• Washing time: For immersion: Less than 5 minutes at 40°C or less.
For steam: Less than 2 minutes at 90°C or less is recommended.
10
VC-23 Series
FUJITSU MEDIA DEVICES LIMITED
All Rights Reserved.
For further information please contact:
Japan
The contents of this document are subject to change without notice.
Customers are advised to consult with FUJITSU sales
representatives before ordering.
FUJITSU MEDIA DEVICE LIMITED
International Sales & Marketing DEPT.
Shin-Yokohama Square Bldg.,14F,
Shin-yokohama 2-3-12,
The information and circuit diagrams in this document are
presented as examples of semiconductor device applications, and
are not intended to be incorporated in devices for actual use. Also,
FUJITSU is unable to assume responsibility for infringement of
any patent rights or other rights of third parties arising from the use
of this information or circuit diagrams.
Kohoku-ku, Yokohama,
Kanagawa 222-0033, Japan
Tel: +81-45-471-0061
Fax: +81-45-471-0076
http://www.fujitsu.co.jp/hypertext/fmd/English/index.html
North and South America
The contents of this document may not be reproduced or copied
without the permission of FUJITSU LIMITED.
FUJITSU MICROELECTRONICS, INC.
3545 North First Street,
San Jose, CA 95134-1804, U.S.A.
Tel: +1-408-922-9000
Fax: +1-408-922-9179
FUJITSU semiconductor devices are intended for use in standard
applications (computers, office automation and other office
equipments, industrial, communications, and measurement
equipments, personal or household devices, etc.).
Customer Response Center
Mon. - Fri.: 7 am - 5 pm (PST)
Tel: +1-800-866-8608
CAUTION:
Customers considering the use of our products in special
applications where failure or abnormal operation may directly
affect human lives or cause physical injury or property damage, or
where extremely high levels of reliability are demanded (such as
aerospace systems, atomic energy controls, sea floor repeaters,
vehicle operating controls, medical devices for life support, etc.)
are requested to consult with FUJITSU sales representatives before
such use. The company will not be responsible for damages arising
from such use without prior approval.
Fax: +1-408-922-9179
http://www.fujitsumicro.com/
Europe
FUJITSU MICROELECTRONICS EUROPE GmbH
Am Siebenstein 6-10,
D-63303 Dreieich-Buchschlag,
Germany
Tel: +49-6103-690-0
Fax: +49-6103-690-122
Any semiconductor devices have inherently a certain rate of failure.
You must protect against injury, damage or loss from such failures
by incorporating safety design measures into your facility and
equipment such as redundancy, fire protection, and prevention of
over-current levels and other abnormal operating conditions.
http://www.fujitsu-fme.com/
Asia Pacific
FUJITSU MICROELECTRONICS ASIA PTE. LTD.
#05-08, 151 Lorong Chuan,
New Tech Park,
Singapore 556741
If any products described in this document represent goods or
technologies subject to certain restrictions on export under the
Foreign Exchange and Foreign Trade Control Law of Japan, the
prior authorization by Japanese government should be required for
export of those products from Japan.
Tel: +65-281-0770
Fax: +65-281-0220
http://www.fmap.com.sg/
F0101
FUJITSU LIMITED Printed in Japan
相关型号：
©2020 ICPDF网 联系我们和版权申明