VF9MU
更新时间：2024-09-18 15:12:41
品牌：FUJITSU
描述：Power/Signal Relay, POWER/SIGNAL RELAY, SPST, MOMENTARY, 0.133A (COIL), 9VDC (COIL), 1200mW (COIL), PANEL MOUNT, ROHS COMPLIANT
概述
规格参数
数据手册VF9MU 概述
Power/Signal Relay, POWER/SIGNAL RELAY, SPST, MOMENTARY, 0.133A (COIL), 9VDC (COIL), 1200mW (COIL), PANEL MOUNT, ROHS COMPLIANT 功率/信号继电器
VF9MU 规格参数
| 生命周期： | Active | Reach Compliance Code： | unknown |
| 风险等级： | 5.6 | Is Samacsys： | N |
| 主体宽度： | 32.2 mm | 主体高度： | 24.1 mm |
| 主体长度或直径： | 35 mm | 最大线圈电流（直流）： | 0.133 A |
| 线圈工作电压（直流）： | 6.3 V | 线圈功率： | 1200 mW |
| 线圈释放电压（直流）： | 0.9 V | 线圈电阻： | 67 Ω |
| 最大线圈电压（直流）： | 9 V | 线圈/输入电源类型： | DC |
| 触点（交流）最大额定R负载： | 25A@250VAC | 最大触点电流（交流）： | 25 A |
| 最大触点电压（交流）： | 250 V | 触点/输出电源类型： | AC |
| 电气寿命： | 100000 Cycle(s) | 安装特点： | PANEL MOUNT |
| 工作时间： | 20 ms | 最高工作温度： | 65 °C |
| 最低工作温度： | -30 °C | 物理尺寸： | 35mm x 32.2mm x 24.1mm |
| 参考标准： | CSA; UL; VDE | 继电器动作： | MOMENTARY |
| 继电器功能： | SPST | 继电器类型： | POWER/SIGNAL RELAY |
| 释放时间： | 5 ms | 密封： | RT2 |
| 表面贴装： | NO | 端接类型： | QUICK CONNECT |
| Base Number Matches： | 1 |
VF9MU 数据手册
通过下载VF9MU数据手册来全面了解它。这个PDF文档包含了所有必要的细节，如产品概述、功能特性、引脚定义、引脚排列图等信息。
PDF下载POWER RELAY
1 POLE - 20/25/30A - Heavy power control
VF Series
n FEATURES
l UL, CSA, VDE recognized TV-15 rated
l 1 form A contact (SPST-NO)
l Heavy duty 20 to 30A small power relay
l High inrush current and high surge voltage
- Inrush current 65A
- Surge strength 10,000V
l Printed circuit coil terminals type available
l Small package meets high density mounting requirement
l Flux proof sealing, RTII
l RoHS Compliant
Please see page 7 for more information
n PARTNUMBER INFORMATION
VF
B
-
6
H
U
[Example]
(a)
(b) (*) (c) (d) (e)
(a)
(b)
Relay type
Terminal
VF
: VF Series
Nil
B
: Top -- All tab-terminal
: Top -- Tab terminal (contacts)
Bottom -- PCB terminal (coil and movable contact)
: Top -- Tab terminal (coil)
Screw tight terminal (contacts)
: Top -- Screw tight terminal (contacts)
Bottom -- PCB terminal (coil and movable contact)
D
P
(c)
(d)
Coil rated voltage
Contact rating
6
: 3....60VDC
Coil rating table at page 3
H
M
L
: 30A (applicable for D.P.)
: 25A
: 20A
(e)
Approvals
U
: UL, CSA, VDE rating acquired
Note: Actual marking omits hyphen (-) of (*)
1
VF SERIES
n SPECIFICATION
Item
30A type
25A type
20A type
VFD, VFP - ( ) H
1 form A (SPST-NO)
Single
VF ( ) - ( ) M
VF ( ) - ( ) L
Contact
Data
Configuration
Construction
Material
Silver alloy (AgSnO2 ; AgSnOInO)
Max. 30mOhm at 1A, 6VDC
Resistance (initial)
Resistive
Motor
30A, 250VAC
2HP, 250VAC
30A
25A, 250VAC
1.5HP, 250VAC
25A
20A, 250VAC
1HP, 250VAC
20A
Contact rating
Max. carrying current
Max. switching voltage
Max. switching power
Max. switching current
Min. switching load *
Mechanical
250VAC
7,500VA
30A
6,250VA
25A
5,000VA
20A
1A, 10V
Life
Min. 5 x 106 operations
Min. 100 x 103 operations
Min. 200 x 103 operations
1,200 to 1,250mW
Resistive load
Motor load
Electrical
(at contact rating)
Coil Data
Rated Power (at 20 ° C)
Operate Power (at 20 ° C)
Operating temperature range
590 to 620mW
-30 to +65 °C (no frost)
Max. 20ms
Timing Data Operate (at nominal voltage)
Release (at nominal voltage)
Max. 5ms (without diode)
Min. 1,000MOhm at 500VDC
1,200VAC (50/60Hz) 1min.
Insulation
Resistance (Initial)
Dielectric strength
Surge strength
Open contacts
Coil and contacts 4,000VAC (50/60Hz) 1min.
Coil and contacts 10.000V/ 1.2 x 50µs standard wave
Other
Misoperation
Endurance
Misoperation
Endurance
10 to 55Hz double amplitude 1.5mm
10 to 55Hz double amplitude 1.5mm
Min. 200m/s² (11 ± 1ms)
Min. 1,000m/s² (6 ± 1ms)
Approximately 55 g
Vibration Resistance
Shock
Weight
Sealing
Flux proof (RTII)
* Minimum switching loads mentioned above are reference values. Please perform the confirmation test with actual
load before production since reference values may vary according to switching frequencies, environmental contions
and expected reliability levels.
2
VF SERIES
n COIL RATING
Rated Coil
Coil
Must Operate Must Release
Coil Resistance
+/- 10% (Ohm)
Rated Power
(mW)
Voltage
Voltage
(VDC) *
Voltage
(VDC) *
Code
(VDC)
3
5
3
5
7.5
20
2.1
3.5
0.3
0.5
0.6
0.9
1.2
1.8
2.4
4.8
6.0
1,200
1,250
6
6
30
4.2
9
9
67
6.3
12
18
24
48
60
12
18
24
48
60
120
270
480
1,920
3,000
8.4
1,200
12.6
16.8
33.6
42.0
Note: All values in the table are valid for 20°C and zero contact current.
* Specified operate values are valid for pulse wave voltage.
n SAFETY STANDARDS
Type
UL
Compliance
UL 508 873
Contact rating
Flammability: UL 94-V0 (plastics)
VF - ( ) - ( ) L
E56140
20A, 250VAC (resistive)
1HP, 250VAC/125VAC
TV-15, 120VAC
CSA
C22.2 No. 14
LR 35579
VF - ( ) - ( ) M
25A, 250VAC (resistive)
1.5HP, 250VAC
TV-15, 120VAC
VFD, VFP - ( ) - H
30A, 250VAC (resistive)
2HP, 250VAC
TV-15, 120VAC
VDE
0435
VF-(-;B)-LU: 20A, 250VAC resistive: 100K
15A, 250VAC cos φ 0.7: 100K
40017717
VF-(-;B)-HU: 30A, 250VAC resistive: 100K
22.5A, 250VAC cos φ 0.7: 100K
3
VFSERIES
n CHARACTERISTIC DATA
n REFERENCE DATA
4
VF SERIES
n DIMENSIONS
lDimensions
l
Schematics
(TOP VIEW)
lPC board mounting
hole layout
(TOP VIEW)
VF-type
VFB-type
Unit: mm
5
VF SERIES
n DIMENSIONS
lDimensions
l
Schematics
(TOP VIEW)
lPC board mounting
hole layout
(TOP VIEW)
VFD-type
VFP-type
Unit: mm
6
VF SERIES
RoHS Compliance and Lead Free Information
1. General Information
l
l
l
l
All signal and power relays produced by Fujitsu Components are compliant with RoHS directive 2002/95EC
including amendments.
Cadmium as used in electrical contacts is exempted from the RoHS directives on October 21st, 2005.
(Amendment to Directive 2002/95/EC)
All of our signal and power relays are lead-free. Please refer to Lead-Free Status Info for older date codes
at: http://www.fujitsu.com/us/downloads/MICRO/fcai/relays/lead-free-letter.pdf
Lead free solder plating on relay terminals is Sn-3.0Ag-0.5Cu, unless otherwise specified.
This material has been verified to be compatible with PbSn assembly process.
2. Recommended Lead Free Solder Profile
l
Recommended solder Sn-3.0Ag-0.5Cu.
Flow Solder condition:
Pre-heating:
Soldering:
maximum 120˚C
dip within 5 sec. at
260˚C solder bath
Solder by Soldering Iron:
Soldering Iron
Temperature: maximum 360˚C
Duration:
maximum 3 sec.
We highly recommend that you confirm your actual solder conditions
3. Moisture Sensitivity
l
Moisture Sensitivity Level standard is not applicable to electromechanical relays, unless otherwise indicated.
4. Tin Whiskers
l
Dipped SnAgCu solder is known as presenting a low risk to tin whisker development. No considerable length
whisker was found by our in house test.
7
VF SERIES
Fujitsu Components International Headquarter Offices
Japan
Europe
Fujitsu Component Limited
Gotanda-Chuo Building
3-5, Higashigotanda 2-chome, Shinagawa-ku
Tokyo 141, Japan
Fujitsu Components Europe B.V.
Diamantlaan 25
2132 WV Hoofddorp
Netherlands
Tel: (81-3) 5449-7010
Tel: (31-23) 5560910
Fax: (81-3) 5449-2626
Email: promothq@ft.ed.fujitsu.com
Web: www.fcl.fujitsu.com
Fax: (31-23) 5560950
Email: info@fceu.fujitsu.com
Web: emea.fujitsu.com/components/
North and South America
Fujitsu Components America, Inc.
250 E. Caribbean Drive
Sunnyvale, CA 94089 U.S.A.
Tel: (1-408) 745-4900
Asia Pacific
Fujitsu Components Asia Ltd.
102E Pasir Panjang Road
#01-01 Citilink Warehouse Complex
Singapore 118529
Fax: (1-408) 745-4970
Tel: (65) 6375-8560
Email: components@us.fujitsu.com
Web: http://us.fujitsu.com/components
Fax: (65) 6273-3021
Email: fcal@fcal.fujitsu.com
Web: http://www.fujitsu.com/sg/services/micro/components/
©2010 Fujitsu Components Europe B.V. All rights reserved. All trademarks or registered trademarks are the property of their respective
owners.
The contents, data and information in this datasheet are provided by Fujitsu Component Ltd. as a service only to its user and only for gen-
eral information purposes.
The use of the contents, data and information provided in this datasheet is at the users’ own risk.
Fujitsu has assembled this datasheet with care and will endeavor to keep the contents, data and information correct, accurate, comprehen-
sive, complete and up to date.
Fujitsu Components Europe B.V. and affiliated companies do however not accept any responsibility or liability on their behalf, nor on behalf
of its employees, for any loss or damage, direct, indirect or consequential, with respect to this datasheet, its contents, data, and information
and related graphics and the correctness, reliability, accuracy, comprehensiveness, usefulness, availability and completeness thereof.
Nor do Fujitsu Components Europe B.V. and affiliated companies accept on their behalf, nor on behalf of its employees, any responsibility
or liability for any representation or warrant of any kind, express or implied, including warranties of any kind for merchantability or fitness for
particular use, with respect to these datasheets, its contents, data, information and related graphics and the correctness, reliability, accuracy,
comprehensiveness, usefulness, availability and completeness thereof. Rev. August 31, 2010
8
VF9MU 相关器件
| 型号 | 制造商 | 描述 | 价格 | 文档 |
| VFA1104B | STANLEY | Single Color PLCC-2 Bathtub Type (High Reliability type, V-Series) | 获取价格 |
|
| VFA1105W | STANLEY | Single Color Dome Lens Type (High Reliability type, V-Series) | 获取价格 |
|
| VFA1205MP-6W | MORNSUN | DIP PACKAGE DC-DC CONVERTER | 获取价格 |
|
| VFA1205YMD-5W | MORNSUN | Analog Circuit | 获取价格 |
|
| VFA1212MP-6W | MORNSUN | DIP PACKAGE DC-DC CONVERTER | 获取价格 |
|
| VFA1215MP-6W | MORNSUN | DIP PACKAGE DC-DC CONVERTER | 获取价格 |
|
| VFA1215YMD-5W | MORNSUN | Analog Circuit | 获取价格 |
|
| VFA1224MP-6W | MORNSUN | DIP PACKAGE DC-DC CONVERTER | 获取价格 |
|
| VFA1224YMD-5W | MORNSUN | Analog Circuit | 获取价格 |
|
| VFA2405MP-6W | MORNSUN | DIP PACKAGE DC-DC CONVERTER | 获取价格 |
|
VF9MU 相关文章
Bourns 密封通孔金属陶瓷微调电位计产品选型手册(英文版)
- 2024-09-20
- 6
Bourns 精密环境传感器产品选型手册(英文版)
- 2024-09-20
- 9
Bourns POWrTher 负温度系数(NTC)热敏电阻手册 (英文版)
- 2024-09-20
- 8
Bourns GMOV 混合过压保护组件产品选型手册(英文版)
- 2024-09-20
- 6
