71745 [GAMEWELL-FCI]
Speaker/Strobes; 扬声器/频闪灯
| 型号： | 71745 |
| 厂家： | 
GAMEWELL-FCI BY HONEYWELL |
| 描述： | Speaker/Strobes |
| 文件： | 总2页 (文件大小：325K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Features
• Wall-mount models available with field-
selectable candela settings of 15/30/75/
110 cd on multi-candela models, or 15/75
cd on non-selectable model.
Series E
Speaker/Strobes
• Ceiling-mount multi-candela models are
available with field-selectable candela
settings of 15/30/75/95 cd or 115/177
cd, depending on model.
• Strobes produce one flash per second
over the regulated voltage range.
Description
• Zero inrush above peak.
Series E low-profile speaker/strobes
are designed for high-efficiency
sound output, with dual voltage
capability (25/70 VRMS) and field-
selectable taps from 1/8 to 2 watts.
The low-profile design incorporates
a speaker mounting plate for faster
and easier installation. Each model
has a built-in level adjustment
feature and an attractive grille
cover with two flush screws.
• Strobes operate at 24 VDC with wide UL
“regulated voltage” using filtered DC or
unfiltered VRMS input voltage.
• Synchronize strobes with SM or DSM
sync modules (P/N 51548, 51549) or FF8
power supply with built-in sync protocol.
5741ss70.jpg
5741ss90.jpg
• Field-selectable taps for 25 or 70 VRMS
operation from 1/8 watt to 2 watts.
• High-efficiency design for maximum
output at minimum wattage across a
frequency range of 400 to 4000 Hz.
The Series E speaker/strobe models
incorporate the low-current, zero-
inrush, Series RSS non-sync/sync strobe. Strobe options include 15/75 cd or
multi-candela strobe with field-selectable candela settings of: 15, 30, 75, or 110
cd (wall); or 15, 30, 75, or 95 cd, or 115/177 cd (ceiling, depending on model).
• Fast installation with in/out screw
terminals using 12 to 18 AWG (3.1 to
0.78 mm²) wires.
Speaker/strobe sound output
• 1/8 watt: 77.5 dBA @ 10 ft (3.048 m).
• 1/4 watt: 80.4 dBA @ 10 ft (3.048 m).
• 1/2 watt: 83.2 dBA @ 10 ft (3.048 m).
• 1.0 watt: 85.7 dBA @ 10 ft (3.048 m).
• 2.0 watt: 87.8 dBA @ 10 ft (3.048 m).
Series E speaker/strobes provide high audio output with clear audibility,
and are designed to meet the critical needs of the life safety industry for
effective emergency voice communications, tone signaling, and visible
signaling to alert the hearing impaired. The strobe portion of all Series E
speaker/strobes may be synchronized when used in conjunction with the SM
or DSM (P/N 51548, 51549) sync modules or the Gamewell FF8 power
supply. Synchronized strobes offer an easy way to comply with ADA recom-
mendations concerning photosensitive epilepsy. Series E speaker/strobes
are listed for indoor use, with a temperature range of 32°F to 120°F (0°C to
49°C) and a maximum humidity of 85%.
Average RMS current
for multi-candela models
• Wall, 15 cd @ 24 VDC: 0.041 A.
• Wall, 15/75 cd @ 24 VDC: 0.064 A.
• Wall, 30 cd @ 24 VDC: 0.065 A.
• Wall, 75 cd @ 24 VDC: 0.116 A.
• Wall, 110 cd @ 24 VDC: 0.155 A.
• Ceiling, 15 cd @ 24 VDC: 0.045 A.
• Ceiling, 30 cd @ 24 VDC: 0.072 A.
• Ceiling, 75 cd @ 24 VDC: 0.128 A.
• Ceiling, 95 cd @ 24 VDC: 0.171 A.
• Ceiling, 115 cd @ 24 VDC: 0.195 A.
• Ceiling, 177 cd @ 24 VDC: 0.270 A.
Architectural/Engineering Specifications
The speaker appliances shall be Series E speaker/strobes. The speakers
shall be UL Listed under Standard 1480 for Fire Protective Service; speaker
appliances equipped with strobes shall additionally be Listed under UL
Standard 1971, Emergency Devices for the Hearing Impaired. In addition,
the strobes shall be certified to meet the requirements of FCC Part 15,
Class B.
All speakers shall be designed for a field-selectable input of either 25 or 70
VRMS, with selectable power taps from 1/8 watt to 2 watts. All models shall
have a Listed sound output of up to 87 dB at 10 feet (3.048 m), and a Listed
frequency response of 400 to 4000 Hz. The speaker shall incorporate sealed
back construction. All inputs shall employ terminals that accept 12 AWG to
18 AWG (3.1 to 0.78 mm²) wire. The strobe portion of the appliance shall
produce a flash rate of one flash per second over the regulated voltage
range and shall incorporate a Xenon flashtube enclosed in a rugged
LEXAN® lens. The strobe shall be of low-current design. Where multiple-
candela speaker/strobes are specified, the strobe intensity shall be rated per
UL 1971 for 15, 30, 75, or 110 candela for wall-mount applications; and 15,
30, 75, or 95 candela, or for 115/177 candela, for ceiling-mount applications
(depending on model). The selector switch for selecting the candela shall be
Listings
• UL 1971, 1480 Listed.
• CSFM, MEA (NYC) and BFP (City of
Chicago) approved.
• Meets ADA accessibility guidelines.
• Meets FCC Part 15.
• Meets OSHA 29, Part 1910.165.
Series E CS-2243 10/17/03
Page 1 of 2
tamper resistant. The 15/75 candela wall strobe shall be specified when 15 candela UL 1971 Listing with 75 candela
intensity on-axis is required (e.g., ADA compliance). When synchronization is required, the strobe portion of the
appliance shall be compatible with SM and DSM (P/N 71548, 71549) sync modules and the Gamewell FF8 power
supply with built-in sync protocols. The strobes shall not drift out of synchronization at any time during operation.
If the sync module or power supply fails to operate (i.e., contacts remain closed), the strobes shall revert to a non-
synchronized default flash rate of one flash per second.
The speaker/strobe appliances shall be designed for indoor surface- or flush-mounting. The speaker/strobes shall
incorporate a speaker mounting plate with a grille cover, which is secured with two screws for a level, aesthetic
finish. Speaker/strobes shall mount to standard electrical hardware requiring no additional trimplate or adapter.
Speaker/strobes shall be finished in a textured red or white color. All speaker/strobe appliances shall be backward
compatible.
Ordering Information
All 24 V models below feature field-selectable taps for 25 or 70 VRMS operation, from 1/8 watt to 2 watts.
72045
72046
71745
72285
72286
Wall-mount multi-candela (15, 30, 75, 110) speaker/strobe, 24 VDC, square, red (E70-24MCW-FR).
Wall-mount multi-candela (15, 30, 75, 110) speaker/strobe, 24 VDC, square, white (E70-24MCW-FW).
15/75-candela speaker/strobe, wall-mount, 24 VDC, 0.064 A, square, red (E70-241575W-FR).
Ceiling-mount multi-candela (15, 30, 75, 95) speaker/strobe, 24 VDC, round, white (E90-24MCC-FW).
Ceiling-mount multi-candela (115, 177) speaker/strobe, 24 VDC, round, white (E90-24MCCH-FW).
Sync modules, power supply
71548
71549
SM sync module, single-circuit Class B, rated for 3.0 A @ 24 VDC (SM-12/24-R).
DSM sync module, single-circuit Class A or multiple-circuit Class B, rated for 3.0 A per circuit. The
maximum number of interconnected modules is 20 (DSM-12/24-R).
FF8
FireForce 8, NAC expander/power supply. 12/24 VDC, 8.0 A, 4 NACs, built-in sync protocols.
See data sheet CS-2282.
Mounting accessories for Series E speaker/strobes
70418
71317
71318
68292
Surface-mount backbox, 5.5" (13.970 cm) x 5.563" (14.129 cm) x 3.563" (9.049 cm), red (SBB-R).
Extender, molded, 5.25" (13.335 cm) square 0.781" (1.984 cm) deep, red (ISP-R).
Retrofit plate, 8.0" (20.320 cm) x 5.875" (14.923 cm) x 0.406" (1.032 cm) deep, red (RP-R).
Semi-flush plate, 6.0" (15.240 cm) square x 0.313" (0.794 cm) deep, red (SFP-R).
The Gamewell Company
12 Clintonville Road
Northford, CT 06472-1610
Phone: 203-484-7161
Fax: 203-484-7118
Specifications and wiring information are provided for information only and are
believed to be accurate. Gamewell assumes no responsibility for their use.
Data and design are subject to change without notice. Installation and wiring
instructions shipped with the product shall always be used for actual installation.
For more information, contact Gamewell.
www.gamewell.com
A
Company
Copyright ©2003 Gamewell
Page 2 of 2
Series E CS-2243 10/17/03
相关型号：
©2020 ICPDF网 联系我们和版权申明