BK-7100-2 [GAMEWELL-FCI]
Compact Analog Addressable Fire Alarm Control Panel; 紧凑型模拟寻址火灾报警控制面板
| 型号： | BK-7100-2 |
| 厂家： | 
GAMEWELL-FCI BY HONEYWELL |
| 描述： | Compact Analog Addressable Fire Alarm Control Panel |
| 文件： | 总3页 (文件大小：243K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
7100 Series
Compact Analog Addressable
Fire Alarm Control Panel
Description
The Gamewell-FCI 7100 Series fire alarm control panel is a
multi processor-based, analog addressable system. The
control panel is a compact, yet expandable, platform.
Intended for commercial, industrial and institutional instal-
lations, the 7100 Series is ideal for life safety and property
protection fire alarm applications.
The basic 7100 Series control panel provides one (1) or
two (2), analog addressable Signaling Line Circuits (SLCs).
Each SLC supports up to ninety-eight (98) analog address-
able sensors, as well as up to ninety-nine (99) addressable
monitor modules and/or control points. With 197 addresses
available on the 7100-1 and 394 addresses available on
the 7100-2. The 7100 uses an advanced protocol that
ensures an almost instant response to events while at the
same time suppressing nuisance alarms.
7100 Series
Features
•
•
•
Listed per ANSI/UL 864 9th Edition
120 or 240 VAC (optional) input line voltage
Front panel programming with day/night sensitivity
adjustments
The system may be programmed with either the
Windows®-based Field Configuration Program (FCP-7100)
or configured through a comprehensive set of intuitive,
secure password protected front-panel programming
options. This important feature allows the system to quickly
adapt to any future requirements due to changes in occu-
pancies, building remodels, or other contingencies.
•
•
80-character alpha-numeric display
One or two Style 4 (Class “B”) signaling line circuits.
Style 6 (Class “A”) with optional CAOM Module
Two Style Y (Class “B”) regulated notification appliance
circuits rated for 1.5 amp. each. Style Z (Class “A”) with
optional CAOM Module
•
•
The sophisticated circuitry and powerful analog software
enables the 7100 Series fire alarm control panel to read the
specific sensitivity level of each sensor and compensate for
changes due to age, dust accumulation or other environ-
mental factors. The 7100 incorporates the Gamewell-FCI
Listed Integrated Sensitivity Testing (LIST) which meets
NFPA 72 sensitivity testing and maintenance requirements.
The LIST testing allows substantial savings in both mainte-
nance and service while eliminating nuisance alarms.
Suitable for pre-action deluge applications with optional
MCOM Module
•
•
•
•
Periodic trouble reminder
Individual sensor drift compensation
Dual-stage maintenance alerts (“dirty” and “very dirty”)
Multilevel sensor sensitivity adjustments (front panel
programmable)
The Model 7100-1D and 2D features an integral Digital
Alarm Communicator Transmitter (DACT) with all popular
transmission formats and a 16-digit telephone number
field. It is 8-digit Carrier Information Code (CIC) compliant
and also prevents “dialer-runaway” in the event of intermit-
tent system faults. The 7100-1D and 2D are UL Listed for
continued on the next page
An ISO 9000-2000 Company
SIGNALING
FM
MEA
Approved
APPROVED
®
®
®
7165-0694:219 (7100)
7300-0694:231 (LCD-7100)
7300-0694:241 (LDM-7100)
307-99-E
307-99-E Vol. II
S1869 3003549
Microsoft Word is a registered trademark of Microsoft Corporation.
GAMEWELL-FCI
12 Clintonville Road, Northford, CT 06472-1610 USA • Tel: (203) 484-7161 • Fax: (203) 484-7118
Specifications are for information only, are not intended for installation purposes, and are subject to change without notice. No responsibility is assumed by Gamewell-FCI for their use.
©2008 by Honeywell International Inc. All rights reserved.
www.gamewell-fci.com
9020-0466 Rev. E2 page 1 of 3
LDM-7100
Description (Continued)
Remote Station, Proprietary, and Central Station fire alarm
The LED Driver Module (LDM-7100) is designed to mount
in a UL Listed remote annunciator and provides outputs for
remote panel switches and thirty-three (33), remote LEDs.
Three (3), LDM-7100 modules may be installed in a single
annunciator for a total of ninety-nine (99), LEDs per annun-
ciator. This combination may be repeated up to five times
for a total of fifteen (15), LDM-7100 panels installed at up to
five (5), different locations. Maximum distances of up to
4,000 feet (1,219 m) can be achieved using one pair of
twisted, non-shielded wire for serial communication and
using another pair of straight-lay wire for operating voltage.
(For additional information, refer to the LDM-7100 data
sheet, Part Number: 9020-0519).
systems. It allows ample space for wiring and room for bat-
teries up to 7 A/H capacity.
•
Features (Continued)
•
•
Alarm verification per individual sensor
Positive alarm sequence for sensors or monitor
modules
•
Four levels of system access using six (6), digit pass-
words with up to five (5), user passwords per Level
Duplicate and extra address indications
March time (60 or 120 BPM)/temporal pattern/coded
fours/California Code/user-defined zone coding
Cross zoning
•
•
•
CAOM
•
•
The Class “A” Optional Module (CAOM) allows Style Y and
Z (Class “B” and “A”) operation for both Notification Appli-
ance Circuits and allows Style 4 and 6 (Class “B” and “A”)
for both Signaling Line Circuits. It also provides disconnect
switches for each signaling line circuit and a common dis-
connect switch for both notification appliance circuits.
System configuration programming and 280 event log
stored in non-volatile memory
•
•
Fan restart with sequential restart delay
Upload/download of panel configuration between panel
and FCP-7100 program (password protected feature)
Up to sixty-four (64), 7100 panels in the E3 Broadband
network with an optional INI-7100 Module
•
•
MCOM
The Municipal Connection Option Module (MCOM) pro-
vides three (3) choices of outputs. It can be configured as a
Municipal Circuit (City Box) output. It may also be set to
serve as a Reverse Polarity output with a nominal voltage
output of 24 VDC at 0.012 amp. maximum alarm and
supervisory current. The MCOM’s third option provides a
releasing solenoid output rated at:
Optional Accessories
LCD-7100
The LCD-7100 remote serial display offers an 80-character
alphanumeric readout for the remote display of all system
events. It duplicates all the information on the 7100 Series
panel display and provides key switch protected functions
such as System Reset, Alarm Acknowledge, Trouble
Acknowledge, Signal Silence, and Drill Test.
•
•
•
•
24 VDC nominal voltage.
0.005 amp. supervisory current.
0.710 amp. maximum alarm current.
2 ohms maximum line resistance.
LEDs on the LCD-7100 indicate Alarm, Supervisory, Sys-
tem Trouble, Power Fault, Systems Silenced, NAC#1, and
NAC#2 Silenced conditions.
PTRM
The Printer Transient Module (PTRM) provides RS-232
Isolator/Transient protection for the 7100’s RS-232 port
(BSM connector J2). It is used in conjunction with a serial
printer applied to the RS-232 port for permanent record
keeping.
The LCD-7100 can be surface or semi-flush mounted on a
standard four-gang electrical box. It can be installed up to
4,000 feet (1,219 m) from the main control panel. The 7100
Series fire alarm control panel supports up to five (5),
remote LCD-7100 annunciators using one pair of twisted,
non-shielded 18 AWG min. wire or serial communication
and uses another pair of 16 AWG min. for operating volt-
age.
I• NI-7100
The Intelligent Network Interface Module allows the 7100
Series fire alarm control panel to become the platform of a
peer-to-peer, token ring, self-regenerative network com-
prised of up to sixty-four (64), 7100 panels.
(For additional information, refer to the LCD-7100 data
sheet, Part Number: 9020-0486).
GAMEWELL-FCI
12 Clintonville Road, Northford, CT 06472-1610 USA • Tel: (203) 484-7161 • Fax: (203) 484-7118
9020-0466 Rev. E2 page 2 of 3
www.gamewell-fci.com
Specifications
Ordering Information (Continued)
Optional Modules
Primary Input Power 120 VAC, 50/60 Hz @ 2.0 amps.
LCD-7100
Remote Serial Annunciator, LCD
or240VAC,50/60Hz@1.0amp.
4 amps. @ 24 VDC (total)
Display (80-character)
Output Power
Non-resettable Power: 1.0 amp. max.
1.0 amp. max. from both circuits
1.0 amp. max.
Dimensions:
4.25” H x 8.25” W x 1.90”
(43 H x 37 W x 7.7 D cm)
LDM-7100
Dimensions:
CAOM
Remote LED Driver Module
6” W x 4.50” (15.2 x 11.4 cm)
Class A Option Combination Module
with disconnect switches for both
signaling line circuits and notification
appliance circuits
Resettable Power:
Two (2) Notification
1.5 amp. each @ 24 VDC
Appliance Circuits:
Current:
7100-1 (One SLC)
Supervisory
0.065 amp.
0.085 amp.
Alarm
0.085 amp.
0.105 amp.
7100-1D
MCOM
Municipal Connection Option Module
for local energy city box reverse polar-
ity signaling, or releasing solenoid
Printer Transient Module
(One SLC w/DACT)
7100-2 (Two SLC)
7100-2D
(Two SLC w/DACT)
LCD-7100
0.065 amp.
0.085 amp.
PTRM
0.085 amp.
.012 amp.
.012 amp.
0.105 amp.
.023 amp.
.023 amp.
(All LEDs lit)
0.040 amp.
INI-7100-FO
Intelligent Network Interface Module,
Fiber-Optic
LDM-7100
INI-7100-UTP
Intelligent Network Interface Module,
Unshielded, Twisted-Pair
INI-7100-UTP,-FO
Operating
Temperature:
Relative Humidity:
Battery Charger
Capacity:
0.040 amp.
Replacement Parts
T-7100
Transformer, 120 VAC input (replace-
32° - 120° F (0° - 49° C)
85 % (non-condensing)
ment)
T-7100-240
Transformer, 240 VAC input (replace-
ment)
31 A/H (Cabinet accommodates
12 A/H size batteries)
BSM-7100-1
BSM-7100-1D
Replacement board for 7100-1
Replacement board for 7100-1D
Alarm & Trouble
Relay Contacts:
Form “C”, 2 amps. @ 24 VDC
(resistive)
Ordering Information
Systems
Model
7100-1
Description
7100 Addressable System, 1 SLC
mounted in enclosure
Dimensions:
7100-1D
19 3/8” x 19 3/8” (49 x 49 cm) Enclosure
7100 Addressable FACP w/DACT,
1 SLC mounted in enclosure
19 3/8” x 19 3/8” (49 x 49 cm) Enclosure
Dimensions:
Basic Kits
BK-7100-2
Basic System Kit, 2 SLC
(BSM, Keypad Display, Transformer)
Basic System Kit w/DACT, 2 SLC
BK-7100-2D
BK-7100-2-240V Basic System Kit, 2 SLC, 240 VAC
BK-7100-2D-240V Basic System Kit w/DACT, 2 SLC
Cabinets
EN-7100
CS-7100M
7100-ENCL-M
Dimensions:
Enclosure (replacement)
Metal Door (replacement)
7100 Enclosure
16.9” H x 14.4” W x 3” D l
(43 H x 37 W x 7.7 D cm)
NS-7100B
NS-7100R
Enclosure, E3 Series Broadband,
black Enclosure,
E3 Series Broadband, red
19 3/8” H x 19 3/8” W x 4” D
(49 H x 49 W x 10 D cm)
Dimensions:
GAMEWELL-FCI
12 Clintonville Road, Northford, CT 06472-1610 USA • Tel: (203) 484-7161 • Fax: (203) 484-7118
9020-0466 Rev. E2 page 3 of 3
www.gamewell-fci.com
相关型号：
©2020 ICPDF网 联系我们和版权申明