DH-SB1 [GAMEWELL-FCI]
Electromagnetic Door Holders; 电磁门架
| 型号： | DH-SB1 |
| 厂家： | 
GAMEWELL-FCI BY HONEYWELL |
| 描述： | Electromagnetic Door Holders |
| 文件： | 总2页 (文件大小：204K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Features
• Very low current draw.
DH Series
• Superior holding force and low residual
magnetisms.
Electromagnetic Door Holders
• Durable die-cast metal.
• High lustre double chrome or brass plating.
• Dual-voltage AC or DC inputs.
• Terminal block connections.
Description
Gamewell’s DH Series of electro-
magnetic fire door holders are
constructed of durable die-cast
metal finished in high-lustre double
chrome or brass plating.
• Single-or double-coil floor, furface, and
direct mounting (no brackets required).
• Aircraft-quality DH drill fixture available to
reduce installation time and costs.
Other features inclued standard
dual-voltage AC and DC inputs of
24 and 120 volts (standard), as well
as 12 and 24 volts and at 24 and
220 volts models. While reducing
stocking requiements, the 24 and
120 volts model draws only 0.020
mA at 24 VDC, lowering overall job
costs.
• Extension and misalignment rods.
Listings
Listings and approvals below apply to the
DH Series Electromagnetic Door Holders. In
some cases, certain modules may not be
listed by certain approval agencies, or listing
may be in process. Consult factory for
latest listing status.
Other features include single or
double-coil floor mounting, surface
mounting and direct wall mount-
• UL Listed:
ing. No brackets are required.
The DH Series door holders offer installation using an adhesive template
assuring alignment without secondary adjustments. Accessories include
extension and misalignment rods (various lengths) for correct alignment
between door and wall at distances greater than 12.0" (30.48 cm) and
misalignment over 4.0" (10.16 cm).
The aircraft-quality DH drill fixture reduces installation time and provides
a near-perfect alignment of catch-plate and armature.
Basic units offer superior holding force and low residual magnetism.
Models working at 12 and 24 volts and at 24 and 120 volts can operate at
higher listed voltages, producing holdng forces in excess of 100 pounds
(45.3 kg) for special applications.
Standard Application
Gamewell’s electromagnetic DH Series door holders are designed to hold
self-closing swinging doors open until energized by a remote sensing device
responding to smoke, heat, or flames, alarm systems, or a switch. When
de-energized, the door holder releases the door, enabling it to swing closed
to check the spread of smoke, heat, or flames. The door holder can also be
used in other remote door-closing applications as well.
The units are recommended for automatic area protection against smoke,
heat, or flames in schools, hospitals, nursing homes, offices, and other
public buildings of all kinds. Gamewell’s DH Series of electromagnetic
door holders are specially engineered for easy connection to dectectors,
sensors, alarm systems, and annunciators.
DH Series CS-2482 09/01/06
Page 1 of 2
Electrical/Mechanical Specifications
V olta ge
1 2 V
D C/m A
0.0 40
0.0 40
0.0 20
—
A C /m A
0 .0 3 8
0 .0 3 6
0 .0 1 9
0 .02 0
0 .0 1 9
0 .0 1 5
0 .0 8 1
0 .10 0
T e rm ina ls
L B.
3 0
K G .
1 3.6
1 3.6
18 .1
1 5.8
18 .1
1 1.3
3 4 .0
4 9.8
Com m on & L ow V olta ge
Com m on & H igh V olta ge
Com m on & L ow V olta ge
Com m on & H igh V olta ge
Com m on & L ow V olta ge
Com m on & H igh V olta ge
Com m on & L ow V olta ge
Com m on & L ow V olta ge
2 4 V
3 0
2 4 V
4 0
1 2 V
3 5
2 4 V
0.0 20
—
4 0
22 0 V
2 4 V
2 5
0.0 85
—
7 5
12 0 V
1 10
N O TE: H olding forc e s liste n in a bove table c orre spond w ith sha de d va lue s;
non-sha de d v a lue s a re slightly le ss.
H IG H H O LD IN G F O RC E/S PECIA L A PPLIC A T IO N S :
To obta in pe rform a nc e v a lues in ta lbe a bov e , a pply high v oltage to low
volta ge te rm ina ls (C & L ). T his c onfiguration c a n only be a pplie d to 1 2 & 2 4
volts a nd 24 & 12 0 v olts m ode ls.
Ordering Information
Door holders:
DH-FC1
DH-FB1
DH-SC1
DH-SB1
DH-GC1
DH-GB1
DH-GC2
DH-GB2
Door holder, semi-flush, chrome.
Door holder, semi-flush, brass.
Door holder, surface mount, chrome.
Door holder, surface mount, brass.
Door holder, ground mount, single-door, chrome.
Door holder, ground mount, single-door, brass.
Door holder, ground mount, double-door, chrome.
Door holder, ground mount, double-door brass.
Extensions:
DHE1C
Accessories:
DHCP
1" (2.54 cm) Extensions rod, chrome.
1" (2.54 cm) Extension rod, brass.
Catch plate, chrome.
Catch plate, brass.
Swivel base, chrome.
Swivel base, brass.
Back box, chrome.
DHE1B
DHCPB
DHSBC
DHSBB
DHBBC
DHBBB
DHW
DHE15C
DHE15B
DHE2C
1" (2.54 cm) Extension rod, chrome.
1" (2.54 cm) Extension rod, brass.
2" (5.08 cm) Extension rod, chrome.
2" (5.08 cm) Extension rod, brass.
DHE2B
Back box, brass.
DHE3C
3" (7.62 cm) Extension rod, chrome.
3" (7.62 cm) Extension rod, brass.
Extension wrench. (2 pieces)
DHE3B
DHDF
Swivel base mounting drill
fixture.
DHE4AC
DHE4AB
4" (10.16 cm) Adjustable extension rod, chrome.
4" (10.16 cm) Adjustable extension rod, brass.
Gamewell-FCI
12 Clintonville Road
Northford, CT 06472-1610
Phone: 203-484-7161
Fax: 203-484-7118
Specifications and wiring information are provided for information only and are
believed to be accurate. Gamewell-FCI assumes no responsibility for their use.
Data and design are subject to change without notice. Installation and wiring
instructions shipped with the product shall always be used for actual installation.
For more information, contact Gamewell-FCI.
www.gamewell-fci.com
A Honeywell Company
© 2006 Gamewell-FCI
Page 2 of 2
DH Series CS-2482 09/01/06
相关型号：
©2020 ICPDF网 联系我们和版权申明