SLP-RB [GAMEWELL-FCI]
Small Addressable Fire Alarm Control Panel;
| 型号： | SLP-RB |
| 厂家： | 
GAMEWELL-FCI BY HONEYWELL |
| 描述： | Small Addressable Fire Alarm Control Panel |
| 文件： | 总4页 (文件大小：142K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
S3 Series
Control Panel
Description
Small Addressable
Fire Alarm Control Panel
The Gamewell-FCI, S3 Series Intelligent Fire Alarm Control
Panel provides the latest innovative high-end processing
power. The S3 Series is a digital, microprocessor-based
system that offers a simple, intuitive solution for the small
to mid-sized fire alarm applications.
In standalone or network configurations, the S3 Series
complies with most fire alarm application requirements. It
supports either of the following types of networks.
•
•
Up to 64 nodes using the 7100 Series panel.
Up to 122 nodes using the S3 Series or E3 Series®
panels.
Use either twisted-pair wire or fiber-optic to network panels
at a high-speed 625K baud ARCNET network bus.
With flexible Boolean logic, intelligent detection, and Ether-
net connectivity, this system provides power and versatility
that surpasses comparable, small addressable fire alarm
systems.
S3 Series
Features
The basic S3 Series consists of an SLP (Smart Loop
Panel) main board, LCD-SLP touchscreen display, SLC
loop personality modules, and 7 amp power supply. The
SLP provides either one or two SLC loops in Class A or B
configuration that supports either of the following protocols:
•
•
•
Listed per ANSI/UL® Standard 864 9th Edition.
IBC Seismic Certified.
Allows one SLC loop (expandable to two loops) that
supports either System Sensor or Apollo devices in
Class A or Class B (Style 4, 6 or 7).
System Sensor supports up to 318 intelligent
devices and each SLC loop supports the following.
- up to 159 detectors.
•
Up to 318 devices per loop using the System Sensor®
protocol. If you add a second loop module, it increases
the maximum device count to 636 devices.
•
•
- up to 159 modules (expandable to 636 maximum
per panel).
•
Up to 126 devices per loop using the Apollo protocol. If
you add a second loop module, it increases the maxi-
mum device count to 252 devices.
Apollo supports up to 126 intelligent detectors and
modules per SLC. (Expandable to 252 maximum per
panel).
Four Class B or two Class A NACs can be wired and syn-
chronized using the System Sensor, Cooper-Wheelock, or
Gentex strobes. To retrofit the SLP on the existing audible/
visual appliances, the on-board Electronic EOL (EEOL)
automatically adjusts to the EOL resistor in the field.
•
•
Includes a high resolution (4.3”) (10.92 cm) color touch-
screen display.
Supports a network system of up to 122 nodes
(includes E3 Series® panels) or up to 64 nodes
(includes 7100 Series).
•
•
Provides 7.0 amp power supply (120VAC or 240VAC).
Includes four Class B or two Class A built-in Notification
Appliance Circuits (NAC). Provides selectable System
Sensor, Cooper-Wheelock, or Gentex strobe synchroni-
zation.
Supports up to 32 serial annunciators (LCD, LED-only,
LED Switch).
A 4.3" (10.92 cm) color touchscreen display screen shows
the following:
•
•
•
•
Events on the system
Status of analog addressable devices
Complete diagnostic fault codes/messages
Five programmable function buttons with LED status for
accessibility to the following functions:
•
- Disable/Enable
- Bypass Output
- Lamp Test
- Trouble Acknowledge
- Alarm Acknowledge
- Custom-defined
SIGNALING
City of
Chicago
Approved
7165-1703:0176 Class 1
MEA
S1869 APPROVED COA-#6162
FM
®
®
®
E3 Series , System Sensor and FocalPoint are registered trademarks of Honeywell
International Inc.
FDNY:
Reference Certificate
of Compliance
VMA-45894-02C
®
UL is a registered trademark of Underwriters Laboratories Inc.
GAMEWELL-FCI
12 Clintonville Road, Northford, CT 06472-1610 USA • Tel: (203) 484-7161 • Fax: (203) 484-7118
Specifications are for information only, are not intended for installation purposes, and are subject to change without notice. No responsibility is assumed by Gamewell-FCI for their use.
©2016 by Honeywell International Inc. All rights reserved.
www.gamewell-fci.com
9021-60730 Rev. G page 1 of 4
Features (Continued)
Application
The S3 Series Fire Alarm and Life Safety System is an
easy-to-use intelligent fire alarm solution designed for the
small to mid-sized buildings. Analog technology delivers
the benefits of a simple system installation, while a user-
friendly interface makes panel operation and system main-
tenance quick and intuitive.
•
Offers an Ethernet port for programming, a variety of
system reports, and a FocalPoint® Graphic Workstation
connectivity.
Provides two fully-programmable Form-C contacts for
Fire, Trouble, and Supervisory.
TimeCap - Saves time and date up to 48 hours without
any power or battery.
Automatically adjusts to any NAC End-of-Line Resistor
(EOL) value (1k-55k ohm) for legacy audible/visual
appliances.
•
•
•
Smart Panel Programming
Using Boolean logic programming, the installer may cus-
tomize the system to precisely suit the needs of the build-
ing owner. Auto-programming allows the installer to
instantly locate all the devices on the SLC loop.
•
•
Removable display can be used as a remote annunciator.
Suitable for pre-action deluge applications.
Simple, Intuitive Display
Optional Accessories
DACT-E3 - Dialer
The Digital Alarm Communication Transmitter sends digital
signals over telephone lines to the central station. It con-
nects to the SLP through an RS-485 bus. Using the Con-
tact ID format, the DACT-E3 provides a four-digit account
code followed by the code/numbers listed below:
The front panel display provides a user-friendly interface
for the operator's control. A 4.3” (10.922 cm) color touch-
screen displays system status, event details and service
modes. On the front of the panel, six LEDs show the follow-
ing conditions.
•
•
•
Fire
•
•
•
Silenced
AC Power
Trouble
Hazard (Gas or CO)
Supervisory
•
•
•
Three-digit Event Code
Two-digit Group Number
Three-digit Contact Number
Five custom programmable switches allow the user quick
access to common functions specific to the building like
device disable, output bypass and device status.
All codes are used to provide specific point identification.
The DACT-E3 is compatible with digital alarm communica-
tor receivers (DACRs) that receive the following signaling
formats:
Perfect for Retrofits
The S3 Series is well-suited for retrofit applications. The
SLP provides a simple way to upgrade your fire protection
system. It is designed to be an upgrade solution for the leg-
acy FCI 7100 and Gamewell 602 Series panels. An added
feature is the SLP's EEOL. Using EEOL, the installers can
automatically identify the EOL for existing audible/visual
appliances.
•
•
Contact ID
3+1
•
•
SIA
4+2
For more information, refer to the following data sheets:
DACT-E3 Data Sheet, P/N: 9020-0610
FML-E3/FSL-E3 Data Sheet, P/N: 9021-60783
Flexibility for Future Growth
RPT-E3-UTP - Network Repeater Card
The S3 Series can be expanded to add a second SLC loop
without replacing the entire system. Using the RPT-E3-
UTP Network Repeater, you can network up to 64 nodes
(122 nodes with the ANX node expander) using either
twisted-pair or fiber-optic. The built-in Ethernet port allows
the connection to the Gamewell-FCI’s FocalPoint
Graphical Workstation.
The Network Repeater allows the SLP fire control panels to
connect to the broadband network from remote locations. It
connects to other networked units using unshielded,
twisted-pair wiring. The RPT-E3-UTP is available with two
add-on fiber modules:
•
FML-E3 connects to the network using either 62.5/125
micron multi-mode fiber.
•
FSL-E3 connects to the network using 9/125 micron
single-mode fiber.
Refer to the RPT-E3-UTP Data Sheet, P/N: 9020-0609.
LCD-7100 - Remote Annunciator
The Remote serial display features an 80-character dis-
play. The LCD-7100 can be surface or flush-mounted on a
standard 4-gang electrical box. You can use up to five
LCD-7100 remote annunciators per SLP panel. For more
information, refer to the LCD-7100 Data Sheet, P/N: 9020-0486.
ASM-16 - Addressable Switch/LED Module
There are 16 programmable switches available to perform
any function the application requires. Each ASM-16 switch
has 3 LEDs fully programmable in red, yellow, and green.
These LEDs can be programmed to operate with a certain
button press or operate independently as a status signal
(e.g. ON, OFF, Activated, etc).
Figure 1 LCD-SLP Display
Up to 16 ASM-16 modules can be connected to the SLP
panel. For more information, refer to the ASM-16 Data
Sheet, P/N: 9020-0554.
ANU-48 - 48 LED Driver Unit
The ANU-48 provides output for eight remote panel
switches and 48 remote LEDs for use in a remotely located
UL® Listed annunciator enclosure. Up to 16 ANU-48 mod-
ules can be connected to the SLP panel. For more infor-
mation, refer to the ANU-48 Data Sheet, P/N: 9020-0596.
GAMEWELL-FCI
12 Clintonville Road, Northford, CT 06472-1610 USA • Tel: (203) 484-7161 • Fax: (203) 484-7118
9021-60730 Rev. G page 2 of 4
www.gamewell-fci.com
Figure 2 illustrates the SLP-BB Cabinet Enclosure.
Specifications
Device Loops
Up to two Class A or B, System Sensor
units, each loop supporting up to 318
device addresses.
SLP-BB CABINET
BACKBOX
Or-
Apollo units, each loop supporting up
to 126 device addresses per loop.
4 Class B or 2 Class A
(2.0 A each circuit), 6.0 A total
SLP-BB CABINET
OUTER DOOR
4
NAC circuits
NAC Operating Voltage 24 VDC
NAC Minimum Voltage 19.5 VDC @ 20.4 V battery voltage
SLC Loop Circuit
3
Operating Voltage
Input Voltage
24 V peak-to-peak
120 VAC, 60 Hz 240 VAC 50-60 Hz
Input Current
120 VAC, 2.75 amps max.
240 VAC, 1.4 amps max.
2
1
Aux Power (Resettable) Two Auxiliary circuits, 24 VDC, 1.75 A
20 1/8"H
Supervised, Class 2 Power-Limited
(maximum current of 1.75 is shared
between two circuits).
Aux Power
(Non-Resettable)
Base Panel Current draw Standby: 0.111 amps
Alarm: 0.243 amps
Operating Temperature 32°-120° F (0°-49° C)
Relative Humidity
93% (non-condensing)
Battery Charger Voltage +24 VDC
Battery Charger
Capacity
Alarm, Trouble & Supervisory
Relay Contacts
55 A/H batteries (cabinet
accommodates 12 A/H batteries)
4 1/2" D
Form-C, 2 amps @ 24VDC (resistive)
Cabinet Dimensions:
SLP-BB Dimensions
14 1/2” W x 20 1/8” H x 4 1/2” D
(36.83 W x 51.18 H x 11.43 D cm)
19 3/8” W x 19 3/8” H x 4.5” D
(49.22 W x 49.22 H x 11.43 D)
S3BB-RB Dimensions
Figure 2 SLP Enclosure
Supports up to 636 Velociti devices
or 252 XP95 devices
S3 Series
Fire Alarm Control
Panel
DNR
Networkable up to 122
panels using twisted
pair wire or fiber optics.
MCS-COF
Intelligent Duct
Fire/Carbon Monoxide
Detector
Detector
ASD-PL2F
ASD-LS
Photo Detector
Laser Detector
AMM-2IF
AMM-2RIF
Mini Monitor Module
Dual Input/Output Module
Local Energy
E3 Series
Panel
Trip
Ethernet
AOM-2RF
MS-7AF
Relay Module
Pull Station
LCD-SLP
LCD-7100
LCD-E3
Color Touchscreen
Annunicator
emote Annunicator
Remote Annunicator
FocalPoint
Workstation
ASM-16
ANU-48
LED Display Driver
Laptop
Programming
LED Switch Control
Figure 3 SLP Panel Configuration
GAMEWELL-FCI
12 Clintonville Road, Northford, CT 06472-1610 USA • Tel: (203) 484-7161 • Fax: (203) 484-7118
www.gamewell-fci.com
9021-60730 Rev. G page 3 of 4
Ordering Information (Continued)
Ordering Information
Part Number
Accessories
DACT-E3
Description
Part Number Description
SLP-BLK
SLP-RED
SLP-RED-G
SLP addressable FACP in black SLP-BB
enclosure.
Requires either an SLC-PM or an
SLC95-PM for SLC loops.
SLP addressable FACP with red door
and black SLP-BB backbox.
Requires either an SLC-PM or an
SLC95-PM for SLC loops.
SLP addressable FACP
Digital Dialer Communicator
Transmitter for the S3 or E3 Series.
LCD-SLP
LCD Color Touchscreen display with
five programmable switches.
For use with the S3 Series panels.
Remote annunciation requires the E3
Series A2 cabinet.
(E3BB-BA2, E3BB-RA2)
RPT-E3-UTP
Network repeater card with twisted-
pair fiber connections require either an
FML-E3 or an FSL-E3 card.
Multi-mode fiber-optic card for one
channel on the RPT-E3-UTP.
Single-mode fiber-optic card for one
channel on the RPT-E3-UTP.
SLP motherboard
For use with the replacement or the
retrofit solutions.
240VAC power supply with red door and
black SLP-BB backbox.
Requires either an SLC-PM or an
SLC95-PM for SLC loops.
FML-E3
FSL-E3
SLP-RB
SLC-PM
System Sensor Loop Card - 1 loop used
for 159 sensors and 159 modules.
For use with the SLP-E3 panels only.
Apollo Loop Card-1 loop used for 126
sensors and modules.
SLC95-PM
For use with the SLP-E3 panels only.
FLPS-7-RB
SLP 120VAC 7A power supply.
For use with the replacement or the
retrofit solutions.
SLP-RETROFIT SLP Retrofit Kit for the 7100 B-Slim
and IF602 panels.
Includes the new door and the mount-
ing plate. Requires the following:
•
•
SLP-RB
SLC-PM/
SLC95-PM
•
•
LCD-SLP
FLPS-7-RB
S3BB-RB
SLP red cabinet with an inner door for
the mounting display behind the
plexiglass. Requires the following:
•
•
SLP-RB
SLC-PM/
SLC95-PM
•
•
LCD-SLP
FLPS-7-RB
LCD-7100
ASM-16
Remote Serial LCD Annunciator
Remote Programmable Addressable
Switch/LED Module
ANU-48
Remote LED Driver Module
GAMEWELL-FCI
12 Clintonville Road, Northford, CT 06472-1610 USA • Tel: (203) 484-7161 • Fax: (203) 484-7118
9021-60730 Rev. G page 4 of 4
www.gamewell-fci.com
相关型号：
SLP010DD4
Peizoresistive Sensor, Differential, 0Psi Min, 0.36Psi Max, 0-45mV, Rectangular, Through Hole Mount, DIP-6
HONEYWELL
©2020 ICPDF网 联系我们和版权申明