0.5T8CE_2415S1UP [GAPTEC]
0.5W - Single Output DC-DC Converter - Fixed Input - Isolated & Unregulated;型号: | 0.5T8CE_2415S1UP |
厂家: | GAPTEC |
描述: | 0.5W - Single Output DC-DC Converter - Fixed Input - Isolated & Unregulated |
文件: | 总4页 (文件大小:1676K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
0.5T8CE_1UP Series
0.5W - Single Output DC-DC Converter - Fixed Input - Isolated & Unregulated
DC-DC Converter
0.5 Watt
The 0.5T8CE_1UP series is specially designed for applications where a group of
polar power supplies are isolated from the input power supply in a distributed
power supply system on a circuit board.
Small footprint
Industry standard pinout
Low temperature rise
Internal SMD construction
No external component
required
Miniature SMD package style
High efficiency of 78%
1000VDC isolation
Temperature range:
-40°C ~ +105°C
These products apply to:
1) Where the voltage of the input power supply is fixed (voltage variation ≤ 10ꢀ)
2) Where isolation is necessary between input and output
(isolation voltage ≤1000VDC)
RoHS compliance
3) Where the regulation of the output voltage and the output ripple noise are not
demanding
Such as: digit circuit condition; normal low-frequency artificial circuit condition;
relay drive circuit condition, etc.
Common specifications
Short circuit protection:
Temperature rise at full load:
Cooling:
Output specifications
continuous
Item
Test condition
Min
Typ
5
Max
Units
ꢀ
25°C TYP (Ta = 25°C)
Free air convection
-40°C ~ +105°C
-55°C ~ +125°C
300°C MAX, 1.5mm from case for 10 sec
< 95ꢀ
Output voltage
accuracy
Line regulation
Load regulation
Temperature drift
Ripple & Noise*
For Vin change of 1ꢀ
10ꢀ to 100ꢀ load
100ꢀ full load
1.2
ꢀ
ꢀ
Operation temperature range:
Storage temperature range:
Lead temperature
10
0.03 ꢀ/°C
20MHz Bandwidth
60
150
mVp-p
KHz
Storage humidity range:
Case material:
Switching frequency Full load, nominal input
100
DAP
* Ripple and noise tested with “parallel cable” method. See detailed operation
instructions at DC-DC Application Notes.
MTBF (MIL-HDBK-217F@25°C):
Weight:
>3,500,000 hours
1.28g
Input specifications
Example:
0.5T8CE_2415S1UP
Item
Test condition
Min
Typ
Max
10
Units
ꢀ
0.5= 0.5Watt; T8= SMT8; CE= Series; 24= 24Vin; 15= 15Vout;
S= Single output; 1= 1kVDC; U= Unregulated output;
P= short circuit protection (SCP)
Voltage tolerance
Isolation specifications
Note:
Item
Test condition
Min
Typ
Max
Units
VDC
1. Operation under minimum load will not damage the converter; However, they
may not meet all specification listed.
Isolation voltage
Input to output
(60sec/0.5mA)
1000
2. Max. Capacitive Load tested at input voltage range and full load.
3. All specifications measured at Ta = 25°C, humidity < 75ꢀ, nominal input voltage
and rated output load unless otherwise specified.
4. In this datasheet, all the test methods of indications are based on our corpo-
rate standards.
Isolation resistance
Test at 500VDC
1000
MΩ
Part Number
Input Voltage
Output Voltage [VDC]
Output Current
[mA]
Efficiency
[%, typ]
[V]
0.5T8CE_2415S1UP
24
15
33
78
Page 1 of 4
0.5T8CE_1UP – Rev. 2020-1.1
Specifications subject to change without notice.
GAPTEC-Electronic GmbH & Co. KG
sales@gaptec-electronic.com – www.gaptec-electronic.com
0.5T8CE_1UP Series
0.5W - Single Output DC-DC Converter - Fixed Input - Isolated & Unregulated
Typical characteristics
Temperature derating graph
Recommended test circuit
To make sure the product work at perfect operation status with full loading external
capacitor is necessary and it is recommended to use high frequency low resistance
electrolytic capacitor.
Mechanical dimensions
PIN
1
Single
-Vin
3
+Vin
-Vout
+Vout
NC
7
8
14
Page 2 of 4
0.5T8CE_1UP – Rev. 2020-1.1
Specifications subject to change without notice.
GAPTEC-Electronic GmbH & Co. KG
sales@gaptec-electronic.com – www.gaptec-electronic.com
0.5T8CE_1UP Series
0.5W - Single Output DC-DC Converter - Fixed Input - Isolated & Unregulated
RoHS compliant type
Our RoHS parts just can withstand IR Reflow peak temperature: 240degC
+/-5degC as the following profile:
Profile Feature
Pb-Free Assembly
3°C /second max.
Average Ramp-Up Rate
(Ts max to Tp)
Preheat
-Temperature Min (Ts min)
-Temperature Max (Ts max)
-Time (ts min to ts max)
150°C
200°C
60-180 seconds
Time maintained above
-Temperature (TL)
-Time (tL)
217°C
60-150 seconds
Peak/Classification Temperature (Tp)
240°C 5°C
Time within 5°C of actual Peak
Temperature (tp)
20-40 seconds
Ramp-Down Rate
6°C/seconds max.
6 minutes max.
Time 25°C to Peak Temperature
Page 3 of 4
0.5T8CE_1UP – Rev. 2020-1.1
Specifications subject to change without notice.
GAPTEC-Electronic GmbH & Co. KG
sales@gaptec-electronic.com – www.gaptec-electronic.com
0.5T8CE_1UP Series
0.5W - Single Output DC-DC Converter - Fixed Input - Isolated & Unregulated
Tape & Reel Packing Information:
1. Weight: 1.28 grams/pcs
2. Tape & Reel = 400 pcs
3. Outer carton unit: 4000pcs/box
4. Outer carton unit: 10T&R/box
5. Weight: 10.5kg per carton
Page 4 of 4
0.5T8CE_1UP – Rev. 2020-1.1
Specifications subject to change without notice.
GAPTEC-Electronic GmbH & Co. KG
sales@gaptec-electronic.com – www.gaptec-electronic.com
相关型号:
©2020 ICPDF网 联系我们和版权申明