10DCPW_05S4 [GAPTEC]
10Watt - Single Output DC-DC Converter - Ultra Wide Input Range - High Isolated & Regulated;
| 型号： | 10DCPW_05S4 |
| 厂家： | 
GAPTEC |
| 描述： | 10Watt - Single Output DC-DC Converter - Ultra Wide Input Range - High Isolated & Regulated |
| 文件： | 总5页 (文件大小：2388K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
10DCPW_4 series
10Watt - Single Output DC-DC Converter -
Ultra Wide Input Range - High Isolated & Regulated
DC-DC Converter
10 Watt
The 10DCPW_4 series is a 200-1500 VDC ultra wide input voltage regulated DC-
DC converter, which has advantages such as high efficiency, high reliability and
high safety isolation. The series products are widely used in industries such as
Ultra-wide input voltage
range: 200 ~ 1500VDC
Operating temperature:
-40°C ~ 70°C
Input under voltage, over
voltage, reverse voltage and
over current protection
High reliability, long life,
3 years warranty
photovoltaic power generation and high voltage frequency conversion,
pro-
vide a stable operating voltage for the load device, Its multiple protection fea-
tures can enhance the safety performance of the module power supply and the
load under abnormal working conditions.
4000VAC isolation voltage
High efficiency
UL 1741/CSA-C22.2
No.107.1, EN62109 approval
(pending)
Low ripple & noise
Short circuit protection (SCP)
DIN-Rail package products
Built-in high-voltage fuse
RoHS and EMC filter module
Common specifications
Short circuit protection:
Temperature rise at full load:
Cooling:
Output specifications
Continuous, automatic recovery
25°C MAX (Ta= 25°C, 100% load)
Free air convection
-40°C~+70°C
Item
Test condition
Min
Typ
2
Max
300
Units
%
Output voltage
accuracy
Line regulation
Load regulation
Ripple & Noise*
Full load
1
1
%
Operation temperature range:
Storage temperature range:
Case temperature:
0%-100% load
20MHz Bandwidth
%
-40°C ~+85°C
150
mV
90°C MAX
Over current pro-
tection
120%~320%Io,
self-recovery
Welding temperature:
Wave-soldering: 260 5°Cꢀ time:5~10s
Manual-welding: 360 10°Cꢀ time:3~5s
Over voltage
protection
• 5V output voltage
• (Feedback-clamp)
Voltage limited < 8V
• (Feedback-clamp)
Voltage limited < 20V
• (Feedback-clamp)
Voltage limited < 30V
Power derating:
+50°C~+70°C:
10DCPW/15DCPW: 1.5%/°C MIN
40DCPW: 2.5%/°C MIN
• 12V/15V output
voltage
• 24V output voltage
-40°C~0°C:
10DCPW/15DCPW: 0.75%/°C MIN
15DCPW_24S4/40DCPW: 1.5%/°C MIN
Min. load
0%-100% load
200~1500VDC
0
%
s
Case Material Grade:
Black flame-retardant and heat-
resistant plastic (UL94-V0)
Delay time**
2
Switching frequency:
Storage humidity range:
Temperature coefficient:
MTBF (MIL-HDBK-217F@25°C):
Weight:
65kHz
* Test ripple and noise by “parallel cable” method. Test efficiency at normal
temperature and input voltage is 200VDC.
** Delay Time test condition: Full input voltage range, full output load range
(The cooling time between Input power-off and the next input Power-on is
bigger than 15s).
< 95%
0.02%/°C MAX
>300,000 hours
10W/15W output:300g
40W output:410g
Isolation specifications
Item
Test condition
Min
Typ
Max
Units
VAC
MΩ
Isolation voltage
Tested for 1 minute
4000
100
Input specifications
Isolation resistance Test at 500VDC
Item
Test condition
Min
200
Typ
Max
Units
VDC
Input voltage range
Input current
1500
200VDC input
• 10W/15W output
• 40W output
Example:
10DCPW_05S4
120
320
mA
mA
10 = 10Watt; DC = DIP Case; P = Photovoltaik; W = Wide input;
05 = 5Vout; S = Single output; 4 = 4kVAC isolation
800VDC input
• 10W/15W output
• 40W output
30
80
mA
mA
1500VDC input
• 10W/15W output
• 40W output
16
42
mA
mA
Inrush current
• 200VDC
• 800VDC
• 1500VDC
30
80
150
A
A
A
Under-voltage
protection
Under voltage protection range: 170~185V
Under voltage release range:180~195V
External input fuse
Hot plug
15A/1500VDC
Unavailable
Page 1 of 5
GAPTEC-Electronic GmbH & Co. KG
sales@gaptec-electronic.com – www.gaptec-electronic.com
10DCPW_4 – Rev. 2020-1.4
Specifications subject to change without notice.
10DCPW_4 series
10Watt - Single Output DC-DC Converter -
Ultra Wide Input Range - High Isolated & Regulated
EMC specifications
EMI
CE
CISPR22/EN55022
CISPR22/EN55022
IEC/EN61000-4-2
IEC/EN61000-4-3
IEC/EN61000-4-4
IEC/EN61000-4-5
IEC/EN61000-4-6
IEC/EN61000-4-8
CLASS A (refer to EMC recommended circuit)
CLASS A (refer to EMC recommended circuit)
Contact 6KV/Air 8KV perf. Criteria B
EMI
RE
EMS
EMS
EMS
EMS
EMS
EMS
ESD
RS
10V/m
perf. Criteria A
EFT
Surge
CS
2KV
perf. Criteria B (refer to recommended circuit)
perf. Criteria B (refer to recommended circuit)
perf. Criteria A
line to line 1KV
10 Vr.m.s
10A/m
PFM
perf. Criteria A
Product Selection Guide
Part Number
Power
[W]
Nominal Output
Current Output
Capacitive load
[µF, Max.]
Ripple & Noise
[mV, typ.]
Efficiency
[%, max]
[V; Vo]
[mA; lo]
10DCPW_05S4
10
5
2000
6000
150
64
Note: *Part No. with suffix of “DR” means: DIN-Rail mounting (e.g.: 10DCPW_05S4DR means DIN-Rail mounting).
Typical characteristics
10DCPW/15DCPW
40DCPW
10DCPW/15DCPW
15DCPW_24S4
40DCPW
10DCPW/15DCPW
40DCPW
Note:
1. For the 40DCPWxxS4,input voltage should be derated based on temperature derating when it is 1200~1500VDCꢀ
2. For the 10-40DCPW, altitude should be derated based on temperature derating when it is 2000~5000mꢀ
3. This product is suitable for use in natural air cooling environments, if in a closed environment, please contact our company’s
FAE.
Page 2 of 5
10DCPW_4 – Rev. 2020-1.4
Specifications subject to change without notice.
GAPTEC-Electronic GmbH & Co. KG
sales@gaptec-electronic.com – www.gaptec-electronic.com
10DCPW_4 series
10Watt - Single Output DC-DC Converter -
Ultra Wide Input Range - High Isolated & Regulated
Typical application circuit
Model
10DCPW_05S4
15DCPW_12S4
15DCPW_15S4
15DCPW_24S4
40DCPW_12S4
40DCPW_15S4
40DCPW_24S4
C1 (μF)
C2 (μF)
120
120
120
68
TVS
1
1
1
1
1
1
1
SMBJ7.0A
SMBJ20A
SMBJ20A
SMBJ30A
SMBJ20A
SMBJ20A
SMBJ30A
120
120
68
Note:
Output filtering capacitor C2 is an electrolytic capacitor, it is recommended to apply electrolytic capacitor
with high frequency and low resistance. For capacitance and current of capacitor please refer to manufacture’s
datasheet. Capacitance withstand voltage derating should be 80% or above. C1 is a eramic capacitor, which is
used to filter high-frequency noise. TVS is a recommended component to protect post-circuits if converter fails.
EMC solution-recommended circuit
EMC application circuit with higher requirements
(The output circuit parameters show in typical application
Element model
C7, C8, C9, C10
C1, C2, C3, C4
R1, R2, R3, R4
LDM
Recommend value
104K/275VAC
47μF/450V
1MΩ/2W
330uH/1A
LCM
7mH/1A
FUSE
3.15A, slow fusing, necessary
Page 3 of 5
GAPTEC-Electronic GmbH & Co. KG
sales@gaptec-electronic.com – www.gaptec-electronic.com
10DCPW_4 – Rev. 2020-1.4
Specifications subject to change without notice.
10DCPW_4 series
10Watt - Single Output DC-DC Converter -
Ultra Wide Input Range - High Isolated & Regulated
Mechanical dimensions and recommended layout
Page 4 of 5
10DCPW_4 – Rev. 2020-1.4
Specifications subject to change without notice.
GAPTEC-Electronic GmbH & Co. KG
sales@gaptec-electronic.com – www.gaptec-electronic.com
10DCPW_4 series
10Watt - Single Output DC-DC Converter -
Ultra Wide Input Range - High Isolated & Regulated
DIN rail mounting
Note:
1. Unless otherwise specified, all specifications above are measured at rated
input voltage and rated output load, TA = 25°C, humidity < 75%ꢀ
2. All specifications stated in this datasheet are subject to the above listed
models only. For specifications of non-standard models, please contact our
technical support team.
3. Prohibit the use of the washer as water easily corrosive substances cleaning
products shell, In order to avoid damage product shellꢀ
4. In order to improve the conversion efficiency, when the module is working
under high pressure, the module may have certain audio noise, but does not
affect the reliability of the productꢀ
5. The performance indexes of the product models listed in this manual are as
above, but some indexes of non- standard model products will exceed the
abovementioned requirements, and please directly contact our technician for
specific informationꢀ
6. We can provide product customization serviceꢀ
7. Specifications of this product are subject to changes without prior notice.
Page 5 of 5
10DCPW_4 – Rev. 2020-1.4
Specifications subject to change without notice.
GAPTEC-Electronic GmbH & Co. KG
sales@gaptec-electronic.com – www.gaptec-electronic.com
相关型号：
10DCPW_4
10Watt - Single Output DC-DC Converter - Ultra Wide Input Range - High Isolated & Regulated
GAPTEC
©2020 ICPDF网 联系我们和版权申明