15DAWE_2424S1.5 [GAPTEC]
15W - Single Output - Wide Input - Isolated & Regulated;
| 型号： | 15DAWE_2424S1.5 |
| 厂家： | 
GAPTEC |
| 描述： | 15W - Single Output - Wide Input - Isolated & Regulated |
| 文件： | 总5页 (文件大小：2205K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
15DAWE_1.5 series
15W - Single Output - Wide Input - Isolated & Regulated
DC-DC Converter
DC-DC Converter
15 Watt
Efficiency up to 90%
Operating temperature
The 15DAWE_1.5 series are isolated 15W DC-DC products with a 2:1 input
voltage range. They feature efficiencies of up to 90%, 1500VDC input to
output isolation, operating ambient temperature range of -40°C ~ +85°C,
input under-voltage protection, output short-circuit, over-voltage,
over-current protection. They meet CLASS A of CISPR32/EN55032 EMI
standards without external components.
2:1 wide input voltage range
Output over current, over
voltage and input under
voltage protection
range: -40°C ~ +85°C
Six-sided metal shield
Industry standard pinout
Meet CISPR32/EN55032 CLASS A,
without extra components
IEC60950/UL60950/EN60950
approved
Short circuit protection (SCP)
1.5kVDC isolation
They are widely used in applications such as data transmission device,
battery power supplies, tele-comunication device, distributed power
supply system, hybrid module system, remote control system, industrial
robot system fields.
UL-60950-1 (E347551)
Common specifications
Short circuit protection:
Cooling:
Input specifications
Hiccup, continous, self-recovery
Free air convection
Item
Test condition
Min
Typ
30
Max
Units
mA
Reflected ripple current
Vibrating:
10-55Hz, 2G, 30 Min. along X, Y and Z
-40°C~+85°C
Input surge voltage
(1000 ms)
• 24VDC input
• 48VDC input
-0.7
-0.7
50
VDC
VDC
100
Operation temperature range:
Storage temperature range:
Pin soldering resistance temperature:
Storage humidity range:
Switching frequency:
Case material:
Start-up voltage
• 24VDC input
• 48VDC input
18
36
VDC
VDC
-55°C~+125°C
300°C MAX, 1.5mm from case for 10 sec
5-95%RH
Under voltage
shutdown
• 24VDC input
• 48VDC input
12
26
15.5
30
VDC
VDC
Start-up time
Nominal input &
constant resistance
load
10
ms
270kHz TYP, PWM mode
Plastic (UL94-V0)
MTBF (MIL-HDBK-217F@25°C):
Weight:
1000 K hours MIN
Input filter
Ctrl(1)
Pi
26g / 34g with heatsink
• Module ON
Ctrl pin open or pulled high
(3.5-12VDC)
Dimensions:
50.80 × 25.40 × 11.80 mm
51.40 × 26.20 × 16.50 mm with heatsink
• Module OFF
Ctrl pin pulled low to GND
(0-1.2VDC)
• Input current
when OFF
4
7
mA
Output specifications
Hot plug
Unavailable
Item
Test condition
Min
Typ
1
Max
3
Units
%
1. The CTRL pin voltage is referenced to GND.
Output voltage
accuracy
Positive and negative
accuracy
Line regulation
Full load, Input volta-
ge from low to high
0.2
0.5
%
Isolation specifications
Item
Test condition
Min
Typ
Max Units
VDC
Load regulation
5% to 100% load
0.5
1
%
Isolation voltage
Tested for 1 minute
and leakage current
less than 1 mA
1500
Transient recovery 25% load step change
time
300
500
µs
Transient respon-
se deviation
25% load step change
• 3.3VDC output
• others
Isolation resistance
Test at 500VDC
1000
MΩ
5
3
8
5
%
%
Isolation capacitance
100KHz/0.1V
• 24VDC output
• Others
2050
1050
pF
pF
Temperature drift
Ripple & Noise*
Trim
100% full load
0.03 %/°C
20MHz Bandwidth
Input voltage range
Input voltage range
50
100
mVp-p
%Vo
90
110
Example:
15DAWE_2415S1.5
Over voltage
protection
110
160
%Vo
15 = 15Watt; D = DIP; A = series; W = wide input (2:1) 18-36Vin;
Over current
protection
Input voltage range
110
190
%Io
E = cost effective; 15Vout; S = single output; 1.5 = 1500VDC isolation
* Ripple and noise tested by “parallel cable” method. See detailed operation
instructions at Testing of Power Converter section, application notes.
Page 1 of 5
GAPTEC-Electronic GmbH & Co. KG
sales@gaptec-electronic.com – www.gaptec-electronic.com
15DAWE_1.5 – Rev. 2020-1.1
Specifications subject to change without notice.
15DAWE_1.5 series
15W - Single Output - Wide Input - Isolated & Regulated
DC-DC Converter
EMC specifications
EMI
CE
CISPR22/EN55022
CISPR22/EN55022
Others:
CLASS A (without external components) / CLASS B (see EMC compliance circuit ②)
3.3V output: CLASS B (see EMC compliance circuit ②)
EMI
RE
Others:
CLASS A (without external components) / CLASS B (see EMC compliance circuit ②)
3.3V output: CLASS B (see EMC compliance circuit ②)
EMS
EMS
EMS
ESD
RS
IEC/EN61000-4-2
IEC/EN61000-4-3
IEC/EN61000-4-4
Contact 4KV
10V/m
perf. Criteria B
perf. Criteria A
EFT
2KV
(see EMC compliance circuit ①)
perf. Criteria B
EMS
Surge
IEC/EN61000-4-5
line to line 2KV
(see EMC compliance circuit ①)
perf. Criteria B
perf. Criteria A
perf. Criteria B
EMS
EMS
CS
IEC/EN61000-4-6
IEC/EN61000-4-29
3 Vr.m.s
0%-70%
Voltage dips, short and
interruptions immunity
Part Number
Input Voltage [VDC]
Range
Max(1)
Output Voltage
[VDC]
Output Current
Input Current [mA, typ/max]
Efficiency
[%, Typ.]
Capacitive load
[µF, Max]
Nominal
24
[mA, Max]
3000
1250
Full load
702/718
702/718
702/718
702/718
355/363
355/363
351/363
351/363
351/363
No load
30/75
30/10
5/10
15DAWE_2405S1.5
15DAWE_2412S1.5
15DAWE_2415S1.5
15DAWE_2424S1.5
15DAWE_4803S1.5
15DAWE_4805S1.5
15DAWE_4812S1.5
15DAWE_4815S1.5
15DAWE_4824S1.5
18-36
18-36
18-36
18-36
36-75
36-75
36-75
36-75
36-75
40
40
40
40
80
80
80
80
80
5
12
15
24
3.3
5
89
89
89
90
83
88
88
89
89
4700
1000
820
24
24
1000
625
24
5/10
270
48
4000
3000
1250
20/30
20/30
5/10
14700
4700
1000
820
48
48
12
15
24
48
1000
625
5/10
48
5/10
270
1. Input voltage can’t exceed this value, or will cause the permanent damage.
2. Add suffix “H” for heat sink mounted, for example 15DAWE_2405S1.5H.
Typical characteristics
Page 2 of 5
15DAWE_1.5 – Rev. 2020-1.1
Specifications subject to change without notice.
GAPTEC-Electronic GmbH & Co. KG
sales@gaptec-electronic.com – www.gaptec-electronic.com
15DAWE_1.5 series
15W - Single Output - Wide Input - Isolated & Regulated
DC-DC Converter
Efficiency
15DAWE_2405S1.5
15DAWE_2405S1.5
15DAWE_4815S1.5
15DAWE_4815S1.5
Typical application
All the DC/DC converters of this series are tested before delivery using
the recommended circuit shown in Fig. 1.
Input and/or output ripple can be further reduced by appropriately
increasing the input & output capacitor values Cin and Cout and/or by
selecting capacitors with a low ESR (equivalent series resistance). Also
make sure that the capacitance is not exceeding the specified max.
capacitive load value of the product.
Figure 1
EMC recommended circuit
Figure 1
Page 3 of 5
15DAWE_1.5 – Rev. 2020-1.1
Specifications subject to change without notice.
GAPTEC-Electronic GmbH & Co. KG
sales@gaptec-electronic.com – www.gaptec-electronic.com
15DAWE_1.5 series
15W - Single Output - Wide Input - Isolated & Regulated
DC-DC Converter
Trim
Trim Function for Output Voltage Adjustment (open if unused)
Mechanical dimensions
Page 4 of 5
15DAWE_1.5 – Rev. 2020-1.1
Specifications subject to change without notice.
GAPTEC-Electronic GmbH & Co. KG
sales@gaptec-electronic.com – www.gaptec-electronic.com
15DAWE_1.5 series
15W - Single Output - Wide Input - Isolated & Regulated
DC-DC Converter
Mechanical dimensions (with heatsink)
Note:
1. The maximum capacitive load offered were tested at input voltage range and
full load;
2. Unless otherwise specified, parameters in this datasheet were measured under
the conditions of Ta = 25°C, humidity <75%RH with nominal input voltage and
rated output load;
3. All index testing methods in this datasheet are based on company corporate
standards;
4. We can provide product customization service, please contact our technicians
directly for specific information;
5. Products are related to laws and regulations: see „Features“ and „EMC“;
6. Our products shall be classified according to ISO14001 and related environmen-
tal laws and regulations, and shall be handled by qualified units.
Page 5 of 5
15DAWE_1.5 – Rev. 2020-1.1
Specifications subject to change without notice.
GAPTEC-Electronic GmbH & Co. KG
sales@gaptec-electronic.com – www.gaptec-electronic.com
相关型号：
©2020 ICPDF网 联系我们和版权申明