1D14C_1515S3UP [GAPTEC]
1W - Single/Dual Output DC-DC Converter - Fixed Input - Isolated & Unregulated;型号: | 1D14C_1515S3UP |
厂家: | GAPTEC |
描述: | 1W - Single/Dual Output DC-DC Converter - Fixed Input - Isolated & Unregulated |
文件: | 总4页 (文件大小:1130K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
1D14C_S3UP & 1D14C_D3UP Series
1W - Single/Dual Output DC-DC Converter - Fixed Input - Isolated & Unregulated
DC-DC Converter
1 Watt
The 1D14C_S3UP & 1D14C_D3UP Series are specially designed for applications
High efficiency up to 81%
High density, high stability
3000VDC Isolation
Temperature range:
-40°C ~ +105°C
where an isolated voltage is required in a distributed power supply system.
No external component
required
These products apply to:
DIP package
1) Where the voltage of the input power supply is fixed
(voltage variation ≤ ±10ꢀ)
Meet EN60950, UL60950
Short circuit protection (SCP)
Industry standard pinout
RoHS compliance
2) Where isolation is necessary between input and output
(isolation voltage ≤3000VDC)
3) Where the output voltage regulation and the ripple & noise of the output
voltage is not strictly required;
Typical application: digit circuit condition; normal low-frequency artificial
circuit condition; relay drive circuit and data switching circuit condition, etc..
UL-60950-1 (E347551)
Common specifications
Output specifications
Short circuit protection*:
Continuous, self-recovery
Item
Test condition
Min
Typ
Max
Units
1 second for models 1D14C_2405S3U/
1D14C_24xxD3U/1D14C_0303S3U
Output voltage
accuracy
See tolerance envelope graph
@Typical characteristics
Temperature rise at full load:
Cooling:
25°C TYP
Line regulation
For Vin change of 1ꢀ
• 3.3VDC output
• Other output
Free air convection
-40°C – +105°C
-55°C – +125°C
±1.5
±1.2
ꢀ
ꢀ
Operation temperature range:
Storage temperature range:
Casing temperature rise:
Load regulation
10ꢀ to 100ꢀ load
• 3.3V output
• 5V output
• 12V output
• 15V output
1±
12
±
ꢀ
ꢀ
ꢀ
ꢀ
25°C TYP, Ta = 25°C, nominal input, full
load output
7
Lead temperature
Storage humidity range:
Case material:
300°C MAX, 1.5mm from case for 10 sec
Temperature drift
Ripple & Noise*
100ꢀ full load
±0.03
150
ꢀ/°C
< 95ꢀ
20MHz Bandwidth
60
mVp-
p
Plastic [U94-VO]
>3,500,000 hours
2.4g
MTBF (MIL-HDBK-217F@25°C):
Weight:
EMC specifications
EMI / CE
CISPR22/EN55022,
CLASS B
* Supply voltage must be discontinued at the end of short circuit duration for:
1D14C_2405S3U/1D14C_24xxD3U/1D14C_0303S3U series.
(see EMC solution-recommended circuit)
EMI / RE
CISPR22/EN55022, CLASS B
(see EMC solution-recommended circuit)
Input specifications
EMS / ESD
Single IEC/EN 61000-4-2
Dual IEC/EN 61000-4-2
Contact ±±KV / perf. Criteria B
Contact ±6KV / perf. Criteria B
Item
Test condition
Min Typ
Max
Units
Input current
• 3.3V input
• 5V input
• 12V input
• 15V input
• 24V input
420/30 -/70
256/20 -/60
mA
mA
mA
mA
mA
Example:
1D14C_0505D3UP
1 = 1Watt; D14 = DIP14; C = Pinning; 5Vin; 5Vout; D =Dual Output;
3 = 3kVDC; U = Unregulated Output; P = Short circuit protection
106/15
±4/10
54/7
-/50
-/35
-/30
Reflected ripple current
Surge voltage
(1 sec. max)
• 3.3V input
• 5V input
• 12V input
• 15V input
• 24V input
-0.7
-0.7
-0.7
-0.7
-0.7
5
VDC
VDC
VDC
VDC
VDC
9
1±
21
30
Note:
1. If the product is not operated within the required load range, the product
performance cannot be guaranteed to comply with all parameters in the
datasheet;
2. The maximum capacitive load offered were tested at nominal input voltage
and full load;
Input filter
Hot plug
Filter capacitor
unavailable
3. Unless otherwise specified, parameters in this datasheet were measured under
the conditions of Ta = 25°C, humidity <75ꢀ with nominal input voltage and
rated output load;
Isolation specifications
Item
Test condition
Min
Typ
20
Max
Units
VDC
4. All index testing methods in this datasheet are based on our Company’s
corporate standards;
Isolation voltage
Tested for 1 minute
and 1mA max
3000
5. The performance parameters of the product models listed in this manual are
as above, but some parameters of non-standard model products may exceed the
requirements mentioned above. Please contact our technicians directly for
specific information;
6. We can provide product customization service;
7. Specifications are subject to change without prior notice.
Isolation resistance
Test at 500VDC
1000
MΩ
pF
Isolation capacitance Input-output,
100KHz/0.1V
Page 1 of 4
1D14C_S3UP & 1D14C_D3UP – Rev. 2020-1.1
Specifications subject to change without notice.
GAPTEC-Electronic GmbH & Co. KG
sales@gaptec-electronic.com – www.gaptec-electronic.com
1D14C_S3UP & 1D14C_D3UP Series
1W - Single/Dual Output DC-DC Converter - Fixed Input - Isolated & Unregulated
Part Number
Input Voltage
[VDC]
Output Voltage
[VDC]
Output Current
[mA, max./min.]
Efficiency
[%, typ]
Capacitive load
[µF, max.]
1D14C_0303S3U
1D14C_0503S3UP
1D14C_0505S3UP
1D14C_0512S3UP
1D14C_0515S3UP
1D14C_1205S3UP
1D14C_1212S3UP
1D14C_1215S3UP
1D14C_1515S3UP
1D14C_2405S3U
1D14C_0505D3UP
1D14C_0512D3UP
1D14C_0515D3UP
1D14C_1205D3UP
1D14C_2412D3U
1D14C_2415D3U
3.3
5
3.3
3.3
5
303/31
303/31
200/20
±3/9
72
75
±0
±0
±1
220
220
220
220
220
220
220
220
220
220
100
100
100
100
100
100
5
5
12
5
15
67/7
12
12
12
15
24
5
5
200/20
±3/9
±0
±0
±1
12
15
67/7
15
67/7
±0
79
79
±0
±1
5
200/20
±100/±10
±42/±5
±34/±3
±100/±10
±42/±5
±34/±3
±5
±12
±15
±5
±12
±15
12
15
12
24
24
±0
±1
±0
Typical characteristics
Page 2 of 4
GAPTEC-Electronic GmbH & Co. KG
sales@gaptec-electronic.com – www.gaptec-electronic.com
1D14C_S3UP & 1D14C_D3UP – Rev. 2020-1.1
Specifications subject to change without notice.
1D14C_S3UP & 1D14C_D3UP Series
1W - Single/Dual Output DC-DC Converter - Fixed Input - Isolated & Unregulated
Typical application circuit
If it is required to further reduce input and output ripple, a filter capaci-
Vin
Cin
Single
Vout
Cout
(µF)
Dual Vout
(VDC)
Cout
(µF)
tor may be connected to the input and output terminals, see Fig.1.
(VDC)
(µF)
Moreover, choosing a suitable filter capacitor is very important, start-up
(VDC)
problems may be caused if the capacitance is too large. Under the con-
3.3/5
12
15
4.7
2.2
2.2
1
3.3/5
12
15
10
2.2
1.
±5
±12
±15
–
4.7
1
0.47
–
dition of safe and reliable operation, the recommended capacitive load
values are shown in Table 1.
24
–
–
It is not recommended to connect any external capacitor when output power is
less than 0.5W.
Fig. 1
EMC solution-recommended circuit
Input voltage
(VDC)
3.3/5/12
15/24
C1
Refer to the Cout in Fig.1
C2
LDM
CY
1000pF
–
2KV
EMI
6.±µH
1nF/3KV
1. 15/24V input series, is subject to CY (CY : 1nF/3KV).
2. It is not needed to add the component in the peripheral circuit when
parameter with the symbol of „--“.
Output load requirements:
In order to ensure the converter can work reliably with high efficiency,
the minimum load should not less than 10ꢀ rated load when it is used. If
the needed power is indeed small, please parallel a resistor on the output
side (the sum of the efficient power and resistor consumption power is
not less than 10ꢀ).
Page 3 of 4
GAPTEC-Electronic GmbH & Co. KG
sales@gaptec-electronic.com – www.gaptec-electronic.com
1D14C_S3UP & 1D14C_D3UP – Rev. 2020-1.1
Specifications subject to change without notice.
1D14C_S3UP & 1D14C_D3UP Series
1W - Single/Dual Output DC-DC Converter - Fixed Input - Isolated & Unregulated
Efficiency
1D14C_0505D3UP
1D14C_0505S3UP
1D14C_0505D3UP
1D14C_0505S3UP
1D14C_1205D3UP
1D14C_1205S3UP
1D14C_1205D3UP
1D14C_1205S3UP
Mechanical dimensions
Note:
Unit: mm[inch]
Pin section tolerances: ± 0.10mm[ ± 0.004inch]
General tolerances: ± 0.25mm[ ± 0.010inch]
Page 4 of 4
GAPTEC-Electronic GmbH & Co. KG
sales@gaptec-electronic.com – www.gaptec-electronic.com
1D14C_S3UP & 1D14C_D3UP – Rev. 2020-1.1
Specifications subject to change without notice.
相关型号:
©2020 ICPDF网 联系我们和版权申明