2.4S7SIC_151505D6UP [GAPTEC]
2.4W - Dual Output - Wide Input - Isolated & Unregulated DC-DC module power supply specialized for SiC driver;
| 型号： | 2.4S7SIC_151505D6UP |
| 厂家： | 
GAPTEC |
| 描述： | 2.4W - Dual Output - Wide Input - Isolated & Unregulated DC-DC module power supply specialized for SiC driver |
| 文件： | 总4页 (文件大小：1686K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
2.4S7SIC_151505D6UP
2.4W - Dual Output - Wide Input - Isolated & Unregulated
DC-DC module power supply specialized for SiC driver
DC-DC Converter
2.4 Watt
The 2.4S7SIC_151505D6UP is a DC-DC module power supply designed for SiC dri-
vers, requiring two sets of isolation power supply. The mode of mutual connection
after two independent outputs is adopted internally for better energy provision of
SiC turn-on and turn-off. Output short circuit protection and self-recovery capabi-
lities are also provided. General application includes:
Efficiency up to 80%
Temperature range:
-40°C~+105°C
Dual Output Voltage
6000VDC isolation
Short circuit protection (SCP)
Industry standard pinout
Output over-voltage protection
RoHS Compliance
• Universal converter
• AC servo drive system
• Electric welding machine
• Uninterruptible power supply (UPS)
Common specifications
Short circuit protection:
Temperature rise at full load:
Cooling:
Output specifications
Continuous, automatic recovery
30°C TYP (Ta=25°C)
Free air convection
-40°C – +105°C
Item
Test condition
Min
14.4
Typ
15
Max
15.9
Units
VDC
Output voltage
+Vo: Vin= 15VDC, Pin6 &
Pin7 +Io= +100mA
-Vo: Vin= 15VDC, Pin5 &
Pin6 -Io= -100mA
-4.75 -5
-5.75
VDC
Operation temperature range*:
Storage temperature range:
Lead temperature
Output voltage
accuracy
+Vo: Vin=15VDC, Pin6 &
Pin7 +Io= +100mA
-Vo: Vin=15VDC, Pin5 &
Pin6 -Io= -100mA
-4
-5
+6
%
%
-55°C – +125°C
300°C MAX, 1.5mm from case for 10 sec
< 95%
+15
Storage humidity range:
Case material:
Line regulation
Load regulation
Input voltage change:
1%
1.1
%
Black flame-retardant and
heat-resistant plastic [UL94-V0]
10% to 100% load
• +Vo
• -Vo
MTBF:
>3,500 K hours
19.50*9.80*12.50mm
4.2g
7
10
%
%
Dimensions:
Weight:
Temperature drift 100% load
coefficient
0.02
%/°C
* Derating when operating temperature up to 85°C (see Typical characteristics,
temperature derating curve).
Ripple & Noise*
20MHz Bandwidth
• +Vo
• -Vo
120
80
mVp-p
mVp-p
Input specifications
Switching
frequency
Full load, nominal input
83
KHz
Item
Test condition
15V output
Min
-0.7
Typ
Max Units
mA
Input current
Surge voltage
Hot plug
162/15
*Test ripple and noise by “parallel cable” method. See detailed operation instruc-
tions at DC-DC application notes.
21
VDC
Unavailable
Capacitor
Input filter
EMC specifications
EMI
EMI
EMS
CE
CISPR22/EN55032
CLASS B
(see EMC recommended circuit)
Isolation specifications
Item
RE
CISPR22/EN55032
(see EMC recommended circuit)
CLASS B
Test condition
Min
Typ
3.5
Max
Units
Isolation voltage
Input-Output, tested
for 1 minute and
leakage current less
than 1mA
6000
3500
VDC
VAC
ESD
IEC/EN61000-4-2 Contact 6KV perf. Criteria B
Example:
2.4S7SIC_151505D6UP
2.4= 2.4 Watt; S7= SIP7; SiC= SiC; 15= 15Vin;
15= +15Vout; 05 = -5Vout; D =Dual Output; 6 = 6KVDC;
U= Unregulated; P= Short Circuit Protection (SCP)
Isolation resistance
Input-Output, test at
500VDC
1000
MΩ
pF
Isolation capacitance Input/Output,
100KHz/0.1V
Part Number
Input Voltage
[V]
Input current full load/
no load [mA, typ]
Output Voltage
[VDC, +Vo/-Vo]
Output current
[mA, +Vo/-Vo]
Max. capacitive
load [µF]
Efficiency
[%, typ]
2.4S7SIC_151505D6UP
15 (13.5-16.5)
193/16
+15/-5
+100/-100
220
76/80
Page 1 of 4
2.4S7SIC_151505D6UP – Rev. 2018-1.0
Specifications subject to change without notice.
GAPTEC-Electronic GmbH & Co. KG
sales@gaptec-electronic.com – www.gaptec-electronic.com
2.4S7SIC_151505D6UP
2.4W - Dual Output - Wide Input - Isolated & Regulated
DC-DC module power supply specialized for SiC driver
Typical characteristics
Test configurations
Page 2 of 4
2.4S7SIC_151505D6UP – Rev. 2018-1.0
Specifications subject to change without notice.
GAPTEC-Electronic GmbH & Co. KG
sales@gaptec-electronic.com – www.gaptec-electronic.com
2.4S7SIC_151505D6UP
2.4W - Dual Output - Wide Input - Isolated & Regulated
DC-DC module power supply specialized for SiC driver
Typical application
EMC typical recommended circuit
The product does not support output in parallel with power per liter or hot-swappable use.
The input and the output of the product are recommended to be connected to use low
ESR series of electrolytic capacitors.
Page 3 of 4
2.4S7SIC_151505D6UP – Rev. 2018-1.0
Specifications subject to change without notice.
GAPTEC-Electronic GmbH & Co. KG
sales@gaptec-electronic.com – www.gaptec-electronic.com
2.4S7SIC_151505D6UP
2.4W - Dual Output - Wide Input - Isolated & Regulated
DC-DC module power supply specialized for SiC driver
Mechanical dimensions
Note:
1. The lead connecting the power supply module and SIC driver should be as short
as possible during use;
2. The output filtering capacitor should be as close as possible to the power supply
module and SIC driver;
3. The peak of the SIC driver gate drive current is high, so low internal resistance
electrolytic capacitor is recommended to be used for the power supply module
output filter capacitor;
4. The average output power of the driver must be lower than that of the power
supply module;
5. Consider fixing with glue near the module if being used in vibration occasion;
6. The max. capacitive load should be tested within the input voltage range and
under full load conditions;
7. Unless otherwise noted, all specifications are measured at Ta= 25°C, humidity
<75%, nominal input voltage and rated output load.
8. In this datasheet, all test methods are based on our corporate standards.
9. All characteristics are for listed models, and non-standard models may perform
differently. Please contact our technical support for more detail.
10. Please contact our technical support for any specific requirement.
11. Specifications of this product are subject to changes without prior notice.
Page 4 of 4
2.4S7SIC_151505D6UP – Rev. 2018-1.0
Specifications subject to change without notice.
GAPTEC-Electronic GmbH & Co. KG
sales@gaptec-electronic.com – www.gaptec-electronic.com
相关型号：
2.4S7SIC_152004D6UP
2.4W - Dual Output - Wide Input - Isolated & Unregulated DC-DC module power supply specialized for SiC driver
GAPTEC
2.4S7SIC_242004D6UP
2.4W - Dual Output - Wide Input - Isolated & Unregulated SIC dedicated DC-DC converter
GAPTEC
2.5-VLVTTL
This chapterdescribes the electric characteristics, switching characteristics,and I/O timing for Cyclone III devices. A glossary is also included for your reference
ALTERA
©2020 ICPDF网 联系我们和版权申明