20DAW4_4812D1.5 [GAPTEC]
20W - Single Output - Wide Input - Isolated & Regulated;型号: | 20DAW4_4812D1.5 |
厂家: | GAPTEC |
描述: | 20W - Single Output - Wide Input - Isolated & Regulated |
文件: | 总8页 (文件大小:4861K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
20DAW4_1.5 Series
20W - Single Output - Wide Input - Isolated & Regulated
DC-DC Converter
DC-DC Converter
20 Watt
Efficiency up to 90%
Operating temperature range:
The 20DAW4 series offers 20W of output, with 4:1 ultra wide input
voltage of 9-36VDC, 18-75VDC, and features 1500VDC isolation,
over current, over voltage and short-circuit protection, as well as six
sided metal shielding.
4:1 wide input voltage range
Short circuit protection (SCP)
Output over voltage protection
Output over current protection
Industry standard pinout
1.5kVDC isolation
-40°C ~ +85°C
Six-sided metal shield
Meet UL60950 and EN60950
Meet CISPR22/EN55022
CLASS A
PCB mounting, chassis moun-
ting, DIN-rail mounting
All models are applied to wide voltage range input situation such as
data transmission device, battery power supply device, telecommuni-
cation device ,distributed power supply system, remote control
system, industrial robot system
UL-60950-1 (E347551)
Common specifications
Input specifications
Short circuit protection:
Hiccup, continuous, automatic
recovery
Item
Test condition
Min
Typ
Max
Units
Input current
(full load/no load)
• 24VDC input
- 3.3V/5V output
- others
• 48VDC input
- 3.3V/5V output
- others
Cooling:
Free air convection
-40°C~+85°C
969/60 993/45
947/15
mA
mA
969/10
Operation temperature range:
Storage temperature range:
Lead temperature:
Storage humidity range:
Switching frequency (PWM mode):
Vibration:
485/35
473/10
496/50 mA
485/20 mA
-55°C~+125°C
300°C MAX, 1.5mm from case for 10 sec
5% MIN, 95% MAX
Reflected ripple current
30
10
mA
Input impulse voltage
(1 sec. max)
• 24VDC input
• 48VDC input
-0.7
-0.7
50
100
VDC
VDC
300kHz TYP
10-55Hz, 10G, 30 Min. along X, Y and Z
Aluminium alloy
Input filter
Pi
Case material:
Starting time
Nominal input
& constant resis-
tance load
ms
MTBF (MIL-HDBK-217F@25°C):
Weight:
1000 K hours MIN
Horizontal: 28g (36g with heatsink)
Chassis: 50g (70g with heatsink)
DIN-rail: 70g (78g with heatsink)
Ctrl(1)
• Module switch:
ON
Ctrl suspended or connected to
TTL high level (2.5-12VDC)
Ctrl pin connected to GND or low
level (0-1.2VDC)
• Module switch:
OFF
Dimension:
Horizontal: 50.8*25.4*11.8mm
(50.8*25.4*16.3mm with heatsink)
Chassis: 76*31.5*21.2 mm
(76*31.5*25.1 mm with heatsink)
DIN-rail: 76*31.5*25.8 mm
(76*31.5*29.7 mm with heatsink)
• Input current
(Models OFF)
1
mA
Hot plug
Unavailable
1. The CTRL control pin voltage is relative to input pin GND.
Isolation specifications
Example:
20DAW4_2415S1.5
Item
Test condition
Min
Typ
Max Units
VDC
20 = 20Watt; D = DIP; A = series; W4 = wide input (4:1) 18-36Vin;
15Vout; S = Single output; 1.5 = 1500VDC isolation
Isolation voltage
Tested for 1 minute
and leakage current
less than 1 mA
1500
Isolation resistance
Test at 500VDC
1000
MΩ
Note:
1. Recommend to use module with more than 5% load, if not, the ripple of the
product may exceeds the specification, but does not affect the reliability of the
product;
3. The recommended unbalance degree of the dual output module load is ≤ 5%;
if the degree exceeds 5%, than the product performance cannot be gua-
ranteed to comply with all parameters in the datasheet. Please contact our
technicians directly for specific information;
4. The maximum capacitive load offered were tested at nominal input voltage and
full load;
Isolation capacitance
100KHz/0.1V
• 24VDC output
• others
2000
1000
pF
pF
5. Unless otherwise specified, parameters in this datasheet were measured under
the conditions of Ta = 25°C, humidity <75% with nominal input voltage and
rated output load;
6. All index testing methods in this datasheet are based on our Company’s corpo-
rate standards;
7. The performance parameters of the product models listed in this manual are
as above, but some parameters of non-standard model products may exceed
the requirements mentioned above. Please contact our technicians directly for
specific information;
8. We can provide product customization service;
9. Specifications are subject to change without prior notice.
Page 1 of 8
20DAW4_1.5 – Rev. 2020-1.9
Specifications subject to change without notice.
GAPTEC-Electronic GmbH & Co. KG
sales@gaptec-electronic.com – www.gaptec-electronic.com
20DAW4_1.5 Series
20W - Single Output - Wide Input - Isolated & Regulated
DC-DC Converter
Output specifications
EMC specifications
Item
Test condition
Min Typ
1
Max
3
Units
%
EMI
EMI
EMS
CE
CISPR22/EN55022
CLASS A (Bare component)
CLASS B (External Circuit Refer to
EMC recommended circuit, 2 )
Output voltage
accuracy
Positive and negative
accuracy
Balance of output Dual output, balanced
voltage
0.5
0.2
0.5
1
%
%
RE
CISPR22/EN55022
load
CLASS A (Bare component)
CLASS B (External Circuit Refer to
recommended circuit, 2 )
Line regulation
Full load, input voltage
from low to high
0.5
ESD
IEC/EN61000-4-2
perf. Criteria B
Contact 4KV
Load regulation
Cross regulation
5% to 100% load
1
%
%
Dual output, main cir-
cuit 50% load, auxiliary
circuit 10% to 100% load
5
EMS
EMS
RS
IEC/EN61000-4-3
IEC/EN61000-4-4
(External Circuit Refer to recommended circuit, 1 )
10V/m
2KV
perf. Criteria A
perf. Criteria B
EFT
Transient recovery 25% load step change
time
300
3
500
5
µs
%
EMS
Surge
CS
IEC/EN61000-4-5 2KV perf. Criteria B
(External Circuit Refer to recommended circuit, 1 )
Transient response 25% load step change
deviation
EMS
EMS
IEC/EN61000-4-6
3 Vr.m.s
perf. Criteria A
perf. Criteria B
Temperature drift
Ripple & Noise*
Trim
100% full load
0.02
70
10%Vo
%/°C
mVp-p
VDC
Voltage dips, short IEC/EN61000-4-29 0%-70%
and interruptions
immunity
20MHz Bandwidth
100
Over Voltage
Protection
• 3.3V output
• 5V output
• 9V output
• 12V output
• 15V output
• 24V output
3.9
6.2
10.8
15
VDC
VDC
VDC
VDC
VDC
VDC
18
30
Over current
protection
Input voltage range
160
%
* Ripple & noise are measured by “parallel cable” method, please see DC-DC Con-
verter Application Notes for specific operation.
Part Number
Input Voltage [VDC]
Output Voltage [VDC]
Output Current
[mA, Max]
Efficiency
[%, Typ.]
Capacitive load(2) [µF,
Max]
Nominal
24
Range
Max(1)
40
40
40
40
40
40
80
80
80
80
80
40
40
40
80
80
80
20DAW4_2403S1.5
20DAW4_2405S1.5
20DAW4_2409S1.5
20DAW4_2412S1.5
20DAW4_2415S1.5
20DAW4_2424S1.5
20DAW4_4803S1.5
20DAW4_4805S1.5
20DAW4_4812S1.5
20DAW4_4815S1.5
20DAW4_4824S1.5
20DAW4_2405D1.5
20DAW4_2412D1.5
20DAW4_2415D1.5
20DAW4_4805D1.5
20DAW4_4812D1.5
20DAW4_4815D1.5
9-36
9-36
9-36
9-36
9-36
9-36
18-75
18-75
18-75
18-75
18-75
9-36
9-36
9-36
18-75
18-75
18-75
3.3
5
5000
4000
2222
1667
1333
834
86
90
88
89
90
90
86
88
89
90
90
86
88
88
86
88
89
18700
9600
4700
1600
1000
500
24
24
9
24
12
15
24
3.3
5
24
24
48
5000
4000
1667
1333
834
18700
9600
1600
1000
500
48
48
12
15
24
5
48
48
24
2000
834
4800
800
24
12
15
5
24
667
625
48
2000
834
4800
800
48
12
15
48
667
625
1. Absolute maximum rating without damage on the converter, but it isn‘t recommended
2. For each output
3. Series with suffix - HS are heat-sink mounting
Series with suffix - CM are with chassis mounting
Series with suffix - CMHS are with chassis mounting + heat-sink
Series with suffix - DR are with Din-Rail mounting
Series with suffix - DRHS are with Din-Rail mounting + heat-sink
Page 2 of 8
20DAW4_1.5 – Rev. 2020-1.9
Specifications subject to change without notice.
GAPTEC-Electronic GmbH & Co. KG
sales@gaptec-electronic.com – www.gaptec-electronic.com
20DAW4_1.5 Series
20W - Single Output - Wide Input - Isolated & Regulated
DC-DC Converter
Temperature derating
Efficiency curves
20DAW4_2405S1.5
20DAW4_2405S1.5
20DAW4_4815S1.5
20DAW4_4815S1.5
Page 3 of 8
GAPTEC-Electronic GmbH & Co. KG
sales@gaptec-electronic.com – www.gaptec-electronic.com
20DAW4_1.5 – Rev. 2020-1.9
Specifications subject to change without notice.
20DAW4_1.5 Series
20W - Single Output - Wide Input - Isolated & Regulated
DC-DC Converter
Typical application
All the 20DAW4_1.5 Series are tested according to the recommended
circuit (see Fig. 1) before delivery.
External capacitor table
If a further decrease of the input and output ripple is required, properly
increase the input & output of additional capacitors Cin and Cout
or select capacitors of low equivalent impedance, and ensure the capa-
citance should be lower than the max. capacitive load of the
product.
Single
Vout
Cout
(µF)
Cin
Dual Vout
(VDC)
Cout
(µF)
Cin
(µF)
(µF)
(VDC)
3.3/5
9/12/15
24
470
220
100
100
100
100
5
220
100
-
100
100
100
12/ 15
-
Table 1
Figure 1
EMC solution-recommended circuit
Recommended
external circuit
parameters
Vin: 24V
Vin: 48V
FUSE
MOV
C0
Choose according to actual input current
20DAW4_
S14K35
330µF/50V
1µF/50V
S14K60
330µF/100V
1µF/100V
C1
C2
Refer to the Cout in Typical application
Figure 1
Note:
LDM1
CY1, CY2
4.7µH
Part ① is used for EMS test and part ② for EMI filtering; selected based on needs.
1nF/2KV
EMC recommended circuit PCB layout
Note:
The min. distance of the bonding pads between input & output isolation capacitors (CY1/CY2) shall be ≥ 2mm.
Page 4 of 8
GAPTEC-Electronic GmbH & Co. KG
sales@gaptec-electronic.com – www.gaptec-electronic.com
20DAW4_1.5 – Rev. 2020-1.9
Specifications subject to change without notice.
20DAW4_1.5 Series
20W - Single Output - Wide Input - Isolated & Regulated
DC-DC Converter
Trim application & trim resistance
Application circuit for TRIM
(Part in broken line is the interior of models)
Formula for resistance of Trim
Note:
Value for R1, R2, R3, and Vref refer to the following table.
RT: Resistance of Trim
a: User-defined parameter, no actual meanings
Vo’: The trim up/down voltage
Applied circuits of Trim (Part in broken line is the interior of models)
Vout (V)
R1 (KΩ)
R2 (KΩ)
R3 (KΩ)
Vref (V)
3.3
5
4.801
2.883
2.863
2.864
2.864
2.864
2.864
2.863
15
10
1.24
2.5
2.5
2.5
2.5
2.5
9
7.500
10.971
14.497
24.872
15
12
15
24
17.8
17.8
20
It is not allowed to connect modules output in parallel to enlarge the powe.
Mechanical dimensions
Recommended footprint
Note:
Unit: mm[inch]
Pin diameter tolerances: 0.10mm [ 0.004inch]
General tolerances: 0.50mm [ 0.020inch]
Page 5 of 8
GAPTEC-Electronic GmbH & Co. KG
sales@gaptec-electronic.com – www.gaptec-electronic.com
20DAW4_1.5 – Rev. 2020-1.9
Specifications subject to change without notice.
20DAW4_1.5 Series
20W - Single Output - Wide Input - Isolated & Regulated
DC-DC Converter
Mechanical dimensions with heatsink (-HS)
Chassis mounting (-CM)
Page 6 of 8
20DAW4_1.5 – Rev. 2020-1.9
Specifications subject to change without notice.
GAPTEC-Electronic GmbH & Co. KG
sales@gaptec-electronic.com – www.gaptec-electronic.com
20DAW4_1.5 Series
20W - Single Output - Wide Input - Isolated & Regulated
DC-DC Converter
Chassis mounting with heatsink (-CMHS)
DIN rail mounting (-DR)
Page 7 of 8
20DAW4_1.5 – Rev. 2020-1.9
Specifications subject to change without notice.
GAPTEC-Electronic GmbH & Co. KG
sales@gaptec-electronic.com – www.gaptec-electronic.com
20DAW4_1.5 Series
20W - Single Output - Wide Input - Isolated & Regulated
DC-DC Converter
DIN rail mounting with heatsink (-DRHS)
Page 8 of 8
20DAW4_1.5 – Rev. 2020-1.9
Specifications subject to change without notice.
GAPTEC-Electronic GmbH & Co. KG
sales@gaptec-electronic.com – www.gaptec-electronic.com
相关型号:
©2020 ICPDF网 联系我们和版权申明