3.6DABT_1524_S3P [GAPTEC]
3.6W - Single Output - Isolated & Regulated IGBT dedicated DC-DC converter;
| 型号： | 3.6DABT_1524_S3P |
| 厂家： | 
GAPTEC |
| 描述： | 3.6W - Single Output - Isolated & Regulated IGBT dedicated DC-DC converter 双极性晶体管 |
| 文件： | 总3页 (文件大小：1306K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
3.6DABT_S12 Series
3.6W - Single Output - Isolated & Regulated
IGBT dedicated DC-DC converter
DC-DC Converter
3.6 Watt
The 3.6DABT_S12 is a series of converters for IGBT drivers, offering 3.6W rated
output power. Adopting electromagnetism isolation technology, this model has
the characteristics of ultra high isolation. It has the function of input under
voltage protection and output short circuit protection, and can be widely used
in:
Efficiency up to 80%
Temperature range:
-40°C~+85°C
Up to 3000VDC isolation
Short circuit protection (SCP)
RoHS Compliance
Industry standard pinout
Output over-voltage protection
IGBT dedicated regulated
DC-DC converter
1. General inverter
2. AC servo drive system
3. Electric welding machine
4. Uninterruptible power supply (UPS)
Common specifications
Short circuit protection:
Temperature rise at full load:
Cooling:
Output specifications
Continuous, automatic recovery
30°C TYP (Ta=25°C)
Free air convection
-40°C – +85°C
Item
Test condition
Min
15
Typ
24
Max
150
Units
mA
Output current
Output voltage
Io, Vin=15VDC
Full load, Vin=15VDC
21.6
26.4
VDC
Operation temperature range:
Storage temperature range:
Pin welding resistance temperature:
Storage humidity range:
Case material:
Output voltage
accuracy
See tolerance envelope
graph
-55°C – +125°C
Line regulation
Load regulation
Full load
1.2
8
1.5
10
%
%
300°C MAX, 1.5mm from case for 10 sec
< 95%
10% to 100% load
100% load
Temperature drift
coefficient
0.03 %/°C
Black flame-retardant and
heat-resistant plastic [UL94-V0]
Ripple & Noise*
20MHz Bandwidth
120
200
mVp-p
KHz
MTBF:
>500,000 hours
51.50*26.50*12.00 mm
24g
Switching frequency Full load, nominal
input
280
Dimensions:
Weight:
*Test ripple and noise by “parallel cable” method.
Input specifications
Isolation specifications
Item
Test condition
full load
Min
Typ
12
Max
Units
VDC
Item
Test condition
Min
Typ
Max
Units
VDC
Input under voltage
protection
Isolation voltage
Input-Output, tested
for 1 min. and leakage
current less than 1mA
12000
Input filter
Hot plug
Capacitor
Isolation resistance
Input-Output, test at
500VDC
1000
MΩ
pF
Unavailable
Isolation capacitance Input/Output,
1MHz/0.1V
3.0
Note:
1. The lead connecting the power supply module and IGBT driver should be as
short as possible during use;
2. The output filtering capacitor should be as close as possible to the power supply
module and IGBT driver;
Example:
3.6DABT_1524D3P
3.6 = 3.6 Watt; D = DIP15; A = Pinning; BT = IGBT Serie; 15 = 15Vin;
15 = 15Vout; S = Single Output; 3 = 3KVDC; P = Short Circuit
Protection (SCP)
3. The peak of the IGBT driver gate drive current is high, so low internal resistance
electrolytic capacitor is recommended to be used for the power supply module
output filter capacitor;
4. The average output power of the driver must be lower than that of the power
supply module;
5. The maximum capacitive load offered was tested at nominal input voltage and
full load;
6. Unless otherwise noted, all specifications are measured at Ta= 25°C, humidity
<75%, nominal input voltage and rated output load.
7. All index testing methods in this datasheet are based on our Company’s corpo-
rate standards;
8. The performance parameters of the product models listed in this manual are
as above, but some parameters of non-standard model products may exceed
the requirements mentioned above. Please contact our technicians directly for
specific information;
9. We can provide product customization service;
10. Specifications are subject to change without prior notice.
Page 1 of 3
3.6DABT_S12 – Rev. 2020-1.0
Specifications subject to change without notice.
GAPTEC-Electronic GmbH & Co. KG
sales@gaptec-electronic.com – www.gaptec-electronic.com
3.6DABT_S12 Series
3.6W - Single Output - Isolated & Regulated
IGBT dedicated DC-DC converter
EMC specifications
EMS
EMS
EMS
EMS
EMS
ESD
RS
IEC/EN61000-4-2
IEC/EN61000-4-3
IEC/EN61000-4-4
IEC/EN61000-4-5
IEC/EN61000-4-6
Contact 4KV
10V/m
perf. Criteria B
perf. Criteria A
perf. Criteria B
perf. Criteria B
perf. Criteria A
EFT
Surge
CS
2KV (output)
2KV (input to output)
3 Vr.m.s
Part Number
Input Voltage
[V]
Input current [mA, typ]
Output Voltage
[VDC, Vo]
Output current
[mA, max/min]
Max. capacitive
load [µF]
Efficiency
[%, min/typ]
full load/ no load
3.6DABT_1524_S3P
15
300/35
24
150/15
1000
78/80
Typical characteristics
Efficiency
Page 2 of 3
3.6DABT_S12 – Rev. 2020-1.0
Specifications subject to change without notice.
GAPTEC-Electronic GmbH & Co. KG
sales@gaptec-electronic.com – www.gaptec-electronic.com
3.6DABT_S12 Series
3.6W - Single Output - Isolated & Regulated
IGBT dedicated DC-DC converter
Typical application
C1/C2
100uF/35V
(Low internal resistance capacitance)
T
It is not allowed to connect modules output in parallel to enlarge the power
Mechanical dimensions
Page 3 of 3
GAPTEC-Electronic GmbH & Co. KG
sales@gaptec-electronic.com – www.gaptec-electronic.com
3.6DABT_S12 – Rev. 2020-1.0
Specifications subject to change without notice.
相关型号：
©2020 ICPDF网 联系我们和版权申明