首页 |元器件品牌

30DAW4_2403S1.5 [GAPTEC]

30W - Single Output - Wide Input - Isolated & Regulated;
30DAW4_2403S1.5
型号： 30DAW4_2403S1.5
厂家： GAPTEC    GAPTEC
描述：

30W - Single Output - Wide Input - Isolated & Regulated
文件： 总5页 (文件大小：1542K)
中文：  中文翻译
下载：  下载PDF数据表文档文件
 查看货源
30DAW4_1.5 Series  
30W - Single Output - Wide Input - Isolated & Regulated  
DIP DC-DC Converter  
DC-DC Converter  
30 Watt  
High efficiency up to 90%  
4:1 wide input voltage range  
I/O Isolation 1500VDC  
Operating temperature:  
The 30DAW4 series offer 30W of output, wide input voltage of  
9-36VDC, 18-75VDC, and features 1500VDC isolation, six-sided metal  
shield over current and short circuit protection.  
-40°C to +75°C  
Input under-voltage protec-  
tion Over-voltage protection  
Over-current protection  
Meet CISPR22/EN55022  
CLASS A  
No-load power consumption  
as low as 0.14W  
Six-sided metal shield  
Short circuit protection (SCP)  
(automatic recovery)  
MTBF >1,000,000 hours  
All models are particularly suited to tele-communications, industrial,  
test equipments power etc.  
Common specifications  
Cooling:  
Input specifications  
Free air convection  
Item  
Test condition  
Min  
Typ  
Max  
Units  
Operation temperature range:  
Storage temperature range:  
Lead temperature range:  
Switching frequency* (PWM mode):  
Storage humidity range:  
Vibration:  
-40°C~+75°C  
Input current  
• 24VDC input  
- 3.3V output  
- 5V output  
- Others  
• 48VDC input  
- 3.3V output  
- 5V output  
- Others  
970/60  
1420/60  
1388/6  
993/65  
1453/65  
1420/9  
mA  
mA  
mA  
(full load/no load)  
-55°C~+125°C  
300°C MAX, 1.5mm from case for 10 sec  
300kHz TYP, Nominal input, full load  
5% MIN, 95% MAX  
474/20  
702/20  
702/5  
485/23  
735/25  
735/8  
mA  
mA  
mA  
10-55Hz, 10G, 30 Min. along X, Y and Z  
Aluminium alloy  
40  
mA  
Reflected ripple  
current  
Case material:  
-0.7  
-0.7  
50  
100  
VDC  
VDC  
Input impulse  
voltage  
• 24VDC input  
• 48VDC input  
MTBF (MIL-HDBK-217F @25°C):  
Weight:  
>1,000,000 hours  
without heatsink 26g, with heatsink  
34g  
(1sec. max)  
9
18  
VDC  
VDC  
Starting voltage  
• 24VDC input  
• 48VDC input  
* This series of products using reduced frequency technology, the switching  
frequency is test value of full load,When the load is reduced to below 50%, the  
switching frequency decreases with decreasing load.  
5.5  
14  
6.5  
15.5  
VDC  
VDC  
Output short circuit  
protection  
• 24VDC input  
• 48VDC input  
PI  
Input filter  
10  
ms  
Start-up time  
Nominal input  
& constant resis-  
tance load  
Isolation specifications  
Item  
Test condition  
Min  
Typ  
Max  
Units  
VDC  
Hot plug  
Ctrl*  
Unavailable  
• Models ON  
Isolation voltage  
Tested for 1 minute  
and 1mA max  
1500  
Ctrl leave open or connect TTL  
high level (3.5-12VDC)  
Ctrl connect GND or low level  
(0-1.2VDC)  
Isolation resistance  
Test at 500VDC  
1000  
MΩ  
pF  
• Models OFF  
Isolation capacitance Input/Output,  
100KHz/0.1V  
2000  
• Input current  
(OFF)  
5
8
mA  
*
The CTRL pin voltage is referenced to GND.  
Note:  
Example:  
1. Input voltage can’t exceed this value, or will cause the permanent damage.  
2. The load shouldn‘t be less than 5%, otherwise ripple will increase dramati-  
cally.  
30DAW4_2415S1.5  
30=30Watt; D= DIP; A=series; W4= wide input (4:1) 9-36Vin; 15Vout;  
S= single output; 1.5=1500VDC  
3. Max. Capacitive Load is tested on Vin-nominal and full load.  
4. The CTRL pin voltage is referenced to GND.  
5. All specifications measured at Ta = 25°C, humidity <75%, nominal input  
voltage and rated output load unless otherwise specified.  
6. In this datasheet, all the test methods of indications are based on corporate  
standards.  
7. Only typical models listed, other models may be different, please contact our  
technical person for more details.  
Page 1 of 5  
30DAW4_1.5 – Rev. 2017-1.3  
Specifications subject to change without notice.  
GAPTEC-Electronic GmbH & Co. KG  
sales@gaptec-electronic.com – www.gaptec-electronic.com  
30DAW4_1.5 Series  
30W - Single Output - Wide Input - Isolated & Regulated  
DIP DC-DC Converter  
Output specifications  
EMC specifications  
Item  
Test condition  
Min Typ  
1
Max  
3
Units  
%
EMI  
EMI  
EMS  
CE  
CISPR22/EN55022  
CLASS A (Bare component)  
CLASS B (External Circuit Refer to  
EMC recommended circuit, 2 )  
Output voltage  
accuracy  
Line regulation  
Load regulation  
Full load, low to high  
5% to 100% load  
0.2  
0.5  
0.5  
1
%
RE  
CISPR22/EN55022  
CLASS A (Bare component)  
CLASS B (External Circuit Refer to  
recommended circuit, 2 )  
%
Temperature drift 100% full load  
0.03  
%/°C  
mV  
us  
Ripple and noise*  
20MHz Bandwidth  
50  
100  
500  
ESD  
IEC/EN61000-4-2  
perf. Criteria B  
Contact 4KV  
Transient recove-  
ry time  
25% load step change  
300  
EMS  
EMS  
RS  
IEC/EN61000-4-3  
IEC/EN61000-4-4  
(External Circuit Refer to recommended circuit, 1 )  
10V/m  
2KV  
perf. Criteria A  
perf. Criteria B  
Transient respon-  
se deviation  
25% load step change  
• 3.3/5V output  
• Others  
EFT  
5
3
8
5
%
%
EMS  
Surge  
IEC/EN61000-4-5 2KV perf. Criteria B  
Over current  
protection  
Input voltage range  
Input voltage range  
Input voltage range  
110  
190  
%Io  
(External Circuit Refer to recommended circuit, 1 )  
IEC/EN61000-4-6 3 Vr.m.s perf. Criteria A  
IEC/EN61000-4-29 0%-70% perf. Criteria B  
EMS  
EMS  
CS  
Short circuit  
protection  
Hiccup, continuous, auto-  
recovery  
Voltage dips,  
short and  
interruptions  
immunity  
Over voltage  
protection  
110  
160  
%Vo  
Trim  
10  
%Vo  
* Test ripple and noise by “parallel cable” method. See detailed operation inst-  
ructions at Testing of Power Converter section, application notes.  
Part Number  
Input Voltage [VDC]  
Output Voltage [VDC]  
Output Current [mA]  
Efficiency(2) [%, Typ.]  
Capacitor load [µF, Max]  
Nominal  
Range  
Max(1)  
40  
40  
40  
40  
40  
40  
80  
Max  
6000  
6000  
3333  
Min  
300  
300  
167  
125  
100  
63  
30DAW4_2403S1.5  
30DAW4_2405S1.5  
30DAW4_2409S1.5  
30DAW4_2412S1.5  
30DAW4_2415S1.5  
30DAW4_2424S1.5  
30DAW4_4803S1.5  
30DAW4_4805S1.5  
30DAW4_4812S1.5  
30DAW4_4815S1.5  
30DAW4_4824S1.5  
24  
24  
24  
24  
24  
24  
48  
48  
48  
48  
48  
9-36  
3.3  
5
85  
88  
88  
90  
90  
90  
87  
88  
89  
89  
89  
10000  
10000  
4700  
2700  
1680  
9-36  
9-36  
9
9-36  
12  
15  
24  
3.3  
5
2500  
2000  
1250  
9-36  
9-36  
680  
18-75  
18-75  
18-75  
18-75  
18-75  
6000  
6000  
2500  
2000  
1250  
300  
300  
125  
100  
63  
10000  
10000  
2700  
1680  
80  
80  
12  
15  
24  
80  
80  
680  
Add suffix “H” for heatsink mounted, for example 30DAW4_2405SH1.5  
1) Absolute maximum rating without damage on the converter, but it isn‘t recommended.  
2) Efficiency is measured In nominal input voltage and rated output load.  
Typical characteristics  
Temperature derating curve, 9-18V input  
Temperature derating curve, 18-75V input  
Page 2 of 5  
30DAW4_1.5 – Rev. 2017-1.3  
Specifications subject to change without notice.  
GAPTEC-Electronic GmbH & Co. KG  
sales@gaptec-electronic.com – www.gaptec-electronic.com  
30DAW4_1.5 Series  
30W - Single Output - Wide Input - Isolated & Regulated  
DIP DC-DC Converter  
Efficiency  
30DAW4_2405S1.5  
30DAW4_2405S1.5  
Typical application  
All the DC/DC converters of this series are tested according to the re-  
commended circuit (see Fig. 1) before delivery.  
If it is required to further reduce input and output ripple, properly in-  
crease the input & output of additional capacitors Cin and Cout or  
select capacitors of low equivalent impedance provided that the capa-  
citance is no larger than the max. capacitive load of the product.  
Vout (VDC)  
Cout (µF)  
Cin  
(µF)  
3.3/5/9  
220  
100  
100  
100  
12/15/24  
figure 1  
EMC recommended circuit  
Recommended  
external circuit  
parameters  
Vin: 24V  
Vin: 48V  
FUSE  
MOV  
C0  
Choose according to actual input current  
S14K35  
S14K60  
330μF/50V  
4.7μF/50V  
330μF/100V  
2.2μF/100V  
C1, C2  
C3  
Refer to the Cout in Typical application  
Note:  
LCM  
1mH  
In Figure 1, part 1 is used for EMS test, part 2 for EMI filtering.  
Choose according to requirements.  
CY1, CY2  
1nF/2KV  
Page 3 of 5  
30DAW4_1.5 – Rev. 2017-1.3  
Specifications subject to change without notice.  
GAPTEC-Electronic GmbH & Co. KG  
sales@gaptec-electronic.com – www.gaptec-electronic.com  
30DAW4_1.5 Series  
30W - Single Output - Wide Input - Isolated & Regulated  
DIP DC-DC Converter  
EMC recommended circuit PCB layout  
Note:  
Note: the min. distance of the bonding pads between input & output isolation capacitors  
(CY1/CY2) shall be ≥ 2mm.  
Trim application & trim resistance  
Application circuit for TRIM  
Formula for resistance of Trim  
(Part in broken line is the interior of models)  
Note:  
Value for R1, R2, R3, and Vref refer to the following table.  
RT: Resistance of Trim  
a: User-defined parameter, no actual meanings  
Vo’: The trim up/down voltage  
Trim up  
Trim down  
Vout (V)  
R1 (KΩ)  
R2 (KΩ)  
R3 (KΩ)  
Vref (V)  
3.3  
5
4.801  
2.883  
2.87  
2.87  
2.87  
2.87  
2.87  
2.87  
12.4  
10  
1.25  
2.5  
2.5  
2.5  
2.5  
2.5  
9
7.500  
11.000  
14.494  
24.872  
15  
12  
15  
24  
15  
15  
17.8  
The product does not support output in parallel with power per liter.  
Page 4 of 5  
GAPTEC-Electronic GmbH & Co. KG  
sales@gaptec-electronic.com – www.gaptec-electronic.com  
30DAW4_1.5 – Rev. 2017-1.3  
Specifications subject to change without notice.  
30DAW4_1.5 Series  
30W - Single Output - Wide Input - Isolated & Regulated  
DIP DC-DC Converter  
Mechanical dimensions (no heatsink) Recommended footprint  
Note:  
Unit: mm[inch]  
Pin diameter tolerances: 0.10mm [ 0.004inch]  
General tolerances: 0.25mm [ 0.010inch]  
Mechanical dimensions (with heatsink)  
Thermal pal  
Note:  
Unit: mm[inch]  
General tolerances: 0.50mm [ 0.020inch]  
If use heatsinks, make sure there is enough space  
for a specific size in the above graph;  
Page 5 of 5  
GAPTEC-Electronic GmbH & Co. KG  
sales@gaptec-electronic.com – www.gaptec-electronic.com  
30DAW4_1.5 – Rev. 2017-1.3  
Specifications subject to change without notice.  

相关型号：

30DAW4_2405S1.5

 30W - Single Output - Wide Input - Isolated & Regulated
GAPTEC

30DAW4_2409S1.5

 30W - Single Output - Wide Input - Isolated & Regulated
GAPTEC

30DAW4_2412S1.5

 30W - Single Output - Wide Input - Isolated & Regulated
GAPTEC

30DAW4_2415S1.5

 30W - Single Output - Wide Input - Isolated & Regulated
GAPTEC

30DAW4_2424S1.5

 30W - Single Output - Wide Input - Isolated & Regulated
GAPTEC

30DAW4_4803S1.5

 30W - Single Output - Wide Input - Isolated & Regulated
GAPTEC

30DAW4_4805S1.5

 30W - Single Output - Wide Input - Isolated & Regulated
GAPTEC

30DAW4_4812S1.5

 30W - Single Output - Wide Input - Isolated & Regulated
GAPTEC

30DAW4_4815S1.5

 30W - Single Output - Wide Input - Isolated & Regulated
GAPTEC

30DAW4_4824S1.5

 30W - Single Output - Wide Input - Isolated & Regulated
GAPTEC

30DAWE

 30W - Single/Dual Output - Wide Input - Isolated & Regulated
GAPTEC

30DAWE_1.5

 30W - Single/Dual Output - Wide Input - Isolated & Regulated
GAPTEC
©2020 ICPDF网 联系我们和版权申明