4.8DBTW [GAPTEC]
4.8W - Dual Output - Wide Input - Isolated & Regulated regulated IGBT dedicated DC-DC converter;型号: | 4.8DBTW |
厂家: | GAPTEC |
描述: | 4.8W - Dual Output - Wide Input - Isolated & Regulated regulated IGBT dedicated DC-DC converter 双极性晶体管 |
文件: | 总4页 (文件大小:923K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
4.8DBTW_3 series
4.8W - Dual Output - Wide Input - Isolated & Regulated regulated
IGBT dedicated DC-DC converter
DC-DC Converter
The 4.8DBTW_3 series are designed for the IGBT driver, offer 4.8W of output,
with output over- voltage protection and short-circuit protection. General
application includes:
4.8 Watt
2:1 wide input voltage range
Efficiency up to 85%
Operating temperature
range:-40°C to +85°C
Industry standard pin-out
IGBT dedicated regulated
DC-DC converter
Up to 3kVDC isolation
Short circuit protection
Output over-voltage protection
• Universal converter
• AC servo drive system
• Electric welding machine
• Uninterruptible power supply (UPS)
Common specifications
Short circuit protection
Output specifications
Continuous, self-recovery
Item
Test condition
Min
Typ
1
Max
4.8
Units
W
Operation temperature range
-40°C to +85°C Power derating≥71°C
(see Fig. 1)
Output Power
0.24
Output voltage
accuracy
• Supplement output
(-9V output)
• Full load, Input voltage
from low to high
Storage temperature range
Casing Temperature Rise
Storage Humidity
Lead temperature
MTBF
-55°C to +125°C
2
%
30°C to 40°C; Ta=25°C
5 -to 95 %RH (Non-condensing)
300°C MAX, 1.5mm from case for 10 sec
>1,000,000 hours
3
5
0.5
1
%
%
%
μs
Line regulation
Load regulation
Input voltage varies by 1%
5%-100% load
0.2
0.5
0.5
Temperature
Recovery Time
25% load step change
2
Case material
Black flame-retardant and
heat-resistant plastic [UL94-V0]
Transient Response
Deviation
25% load step change
100% load
2.5
5
%
Cooling
Free air convection
14g Typ.
Temperature Drift
Coefficient
0.03 %/°C
Weight
Dimension
31.60*20.30*10.20mm
Ripple & Noise*
20MHz bandwidth
100
300
120
200
mVp-p
KHz
Switching frequency Full load, nominal input
Over-voltage
Protection
110
140
%Vo
Input specifications
Item
Test condition
Min Typ
Max
Units
* Ripple and noise tested with “parallel cable” method, please see DC-DC Converter
Application Notes for specific operation methods.
Input voltage
• 12VDC input
• 24VDC input
-0.7
-0.7
25
50
VDC
VDC
Starting voltage
Input filter
• 12VDC input
• 24VDC input
6.5
9
18
VDC
VDC
Example:
4.8DBTW_121509_D3P
Input Filter Capacitor filter
4.8 = 4.8 Watt; D = DIP24; BT = IGBT; W = Wide input 2:1 (7-18; 18-36);
12 = 12Vin; 15 = +15Vout; 09 = -9Vout; D = Dual Output;
3 = 3kVDC isolation; P = Short Circuit Protection (SCP)
Isolation specifications
Item
Test condition
Min
Typ
Max
Units
VDC
Isolation voltage
Input-Output, tested
for 1 minute and
leakage current less
than 1mA
3000
Isolation resistance
Input-Output, test at
500VDC
1000
MΩ
pF
Isolation capacitance Input-output,
100KHz/0.1V
100
Product Selection Guide
Part Number
Input Voltage
Input Current
Full Load/No Load [mA,Typ]
Output Voltage
[VDC, +Vo/-Vo]
Output current
[mA, +Vo/-Vo]
Max. capacitive
Load [µF]
Efficiency @ Full Load
[%,Min/typ]
[VDC]
4.8DBTW_121509_D3P
4.8DBTW_241509_D3P
12 ( 7-18 )
24 (18-36)
471/16
235/8
+15/-9
200/ 10
200/ 10
1000
1000
85
85
+15/-9
Page 1 of 4
4.8DBTW_3 – Rev. 2020-1.0
Specifications subject to change without notice.
GAPTEC-Electronic GmbH & Co. KG
sales@gaptec-electronic.com – www.gaptec-electronic.com
4.8DBTW_3 series
4.8W - Dual Output - Wide Input - Isolated & Regulated regulated
IGBT dedicated DC-DC converter
EMC specifications
EMI
Conducted Disturbance
Radiated Emission
Electrostatic Discharge
Radiation Immunity
EFT
CISPR22/EN55022 CLASS A (see Fig. 4-② for recommended circuit)
CISPR22/EN55022 CLASS A (see Fig. 4-② for recommended circuit)
EMI
EMS
EMS
EMS
EMS
EMS
EMS
IEC/EN61000-4-2
IEC/EN61000-4-3
IEC/EN61000-4-4 2KV
IEC/EN61000-4-6
IEC/EN61000-4-2
Contact 4KV
perf. Criteria B
perf. Criteria A
perf. Criteria B
perf. Criteria A
perf. Criteria B
perf. Criteria B
10V/m
(see Fig. 4-① for recommended circuit)
Surge Immunity
3 Vr.m.s
Conducted disturbance Immunity
Contact 4KV
0%, 70%
Immunities of voltage dip, voltage IEC/EN61000-4-29
drop and short interruption
Typical characteristics
Efficiency
4.8DBTSW_121509_D3P
4.8DBTSW_121509_D3P
4.8DBTW_241509_D3P
4.8DBTW_241509_D3P
Page 2 of 4
4.8DBTW_3 – Rev. 2020-1.0
Specifications subject to change without notice.
GAPTEC-Electronic GmbH & Co. KG
sales@gaptec-electronic.com – www.gaptec-electronic.com
4.8DBTW_3 series
4.8W - Dual Output - Wide Input - Isolated & Regulated regulated
IGBT dedicated DC-DC converter
Typical application
All the IGBT driver of this series are tested according to the recommended circuit (see Fig. 2) before delivery.
If it is required to further reduce input and output ripple, properly increase the input & output of additional capacitors Cin and Cout or
select capacitors of low equivalent impedance provided that the capacitance is no larger than the max. capacitive load of the product.
Vin
Cin
12V/24V
100μF
100μF
Cout
Application circuit
C1
100uF/63V(Electrolytic capacitor)
100uF/35V(Electrolytic capacitor)
10uF/25V(Ceramic capacitor)
C2 /C4
C3/C5
Application Notes
1. The wire between the converter and IGBT driver must as short as possible.
2. External filter capacitors should be connected as close as possible to the
IGBT driver.
3. To ensure the high peak gate current, the filter capacitors should be
electrolytic capacitor and ceramic capacitor collocation.
4. The output average power of the IGBT driver should be less than the output
power of DC-DC module.
EMC solution-recommended
4.8DBTSW_121509_D3P
4.8DBTW_241509_D3P
Fig-4
Parameters
4.8DBTSW_121509_D3P
Choose according to actual input current
4.8DBTW_241509_D3P
FUSE
MOV
C0
Choose according to actual input current
S14K25
680μF/25V
S14K35
330μF/50V
C1,C2
C3,C4
LCM
4.7μF/50V
4.7μF/50V
Refer to the Cout in Fig.2
1mH
Refer to the Cout in Fig.2
3.3mH
Module
FT-AX1D
Page 3 of 4
GAPTEC-Electronic GmbH & Co. KG
sales@gaptec-electronic.com – www.gaptec-electronic.com
4.8DBTW_3 – Rev. 2020-1.0
Specifications subject to change without notice.
4.8DBTW_3 series
4.8W - Dual Output - Wide Input - Isolated & Regulated regulated
IGBT dedicated DC-DC converter
Mechanical dimensions
Note:
Unit: mm [inch]
Pin diameter tolerances: 0.10mm [ 0.004inch]
General tolerances: 0.5mm [ 0.020inch]
Note:
1. The lead connecting the power supply module and IGBT driver should be as short as possible during use;
2. The output filtering capacitor should be as close as possible to the power supply module and IGBT driver;
3. The peak of the IGBT driver gate drive current is high, so low internal resistance electrolytic capacitor is recommended to be used for
the power supply module output filter capacitor;
4. The average output power of the driver must be lower than that of the power supply module;
5. Consider fixing with glue near the module if being used in vibration occasion;
6. The max. capacitive load should be tested within the input voltage range and under full load conditions;
7. Unless otherwise specified, data in this datasheet should be tested under the conditions of Ta = 25°C, humidity <75% when inputting
nominal voltage and outputting rated load;
8. All index testing methods in this datasheet are based on our Company’s corporate standards;
9. The performance indexes of the product models listed in this manual are as above, but some indexes of non-standard model products
will exceed the above-mentioned requirements, and please directly contact our technicians for specific information;
10. We can provide product customization service;
11. Specifications of this product are subject to changes without prior notice.
12. The product does not support output in parallel with power per liter or hot-swappable use
Page 4 of 4
GAPTEC-Electronic GmbH & Co. KG
sales@gaptec-electronic.com – www.gaptec-electronic.com
4.8DBTW_3 – Rev. 2020-1.0
Specifications subject to change without notice.
相关型号:
4.8DBTW_121509_D3P
4.8W - Dual Output - Wide Input - Isolated & Regulated regulated IGBT dedicated DC-DC converter
GAPTEC
4.8DBTW_241509_D3P
4.8W - Dual Output - Wide Input - Isolated & Regulated regulated IGBT dedicated DC-DC converter
GAPTEC
4.8DBTW_3
4.8W - Dual Output - Wide Input - Isolated & Regulated regulated IGBT dedicated DC-DC converter
GAPTEC
4.91520MHZEQXO-2100BMH
CMOS/TTL Output Clock Oscillator, 4.9152MHz Nom, HERMETIC SEALED, METAL, DIP-8/4
EUROQUARTZ
4.9152MHZHC49-4H/30/50/-40+85/18PF/ATF
Parallel - Fundamental Quartz Crystal, 4.9152MHz Nom, HC49-4H, 2 PIN
EUROQUARTZ
4.93-.5%-FA3A-50PPM-CARDPACK
Fixed Resistor, Wire Wound, 3W, 4.93ohm, 130V, 0.5% +/-Tol, -50,50ppm/Cel,
VISHAY
4.99-.25%-FA7-50PPM-TANDR
Fixed Resistor, Wire Wound, 7W, 4.99ohm, 560V, 0.25% +/-Tol, -50,50ppm/Cel,
VISHAY
©2020 ICPDF网 联系我们和版权申明