6DAMW4 [GAPTEC]
6W - Single Output - 4:1 Ultra Wide Input - Isolated & Regulated;型号: | 6DAMW4 |
厂家: | GAPTEC |
描述: | 6W - Single Output - 4:1 Ultra Wide Input - Isolated & Regulated |
文件: | 总4页 (文件大小:1394K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
6DAMW4_6 series
6W - Single Output - 4:1 Ultra Wide Input - Isolated & Regulated
DIP DC-DC Converter
DC-DC Converter
6 Watt
High Efficiency up to 85%
Operating Temperature:
-40°C to +85°C
Short Circuit Protection (SCP)
Over-voltage protection
Over-current protection
Input under-voltage protection
Transformer creepage 8mm,
transformer clearance 5mm
Industry standard pin-out
RoHS Compliance
The 6DAMW4_6 series are specially designed for applications where a
wide range input voltage power supplies are isolated from the input
power supply in a distributed power supply system on a circuit board.
Enhanced isolation, input
to output
These products apply to:
1) Where the voltage of the input power supply is wide range
(voltage range≤ 4:1);
2) Where isolation is necessary between input and output
(isolation≤6000VDC and 2MOPP high isolation);
3) Where the regulation of the output voltage and the output ripple
noise are demanded.
6KVDC, 2MOPP high isolation
No-load power consumption
as low as 0.12W
EN60601-1 (3rd edition
medical grade) approval
Common specifications
Short circuit protection:
Cooling:
Output specifications
Continuous, self-recovery
Free air convection
-40°C~+85°C
Item
Test condition
Min Typ
1
Max
3
Units
%
Output voltage
accuracy
Operation temperature range:
Storage temperature range:
Temperature rise at full load:
Lead temperature range:
Vibration:
Balance of output
voltage
Dual output, balanced
load
0.5
0.2
1.5
%
%
-55°C ~+125°C
40°C TYP
Line regulation
Full load, input voltage
from low to high
0.5
300°C MAX, 1.5mm from case for 10 sec
10-55Hz, 10G, 30 Min. along X, Y and Z
< 95%
Load regulation*
5% to 100% load
0.5
1
%
Transient Recovery
Time
25% load step change
300
500
µs
Storage humidity range:
Case material:
Black flame-retardant heat-proof
plastic (UL94-V0)
Transient Response
Deviation
25% load step change
3
5
%
MTBF (MIL-HDBK-217F@25°C):
Weight:
>1,000,000 hours
13g
Temperature drift
Ripple & Noise**
full load
0.03
%/°C
mVp-p
%Vo
20MHz Bandwidth
Input voltage range
100
110
180
160
Dimensions:
31.60*20.30*10.20 mm
Over-voltage
protection
Over-current
protection
Input voltage range
PWM mode
110
150
160
%Io
Input specifications
Item
Test condition
Min
Typ
Max
Units
Switching
frequency***
300
KHz
Input current
(full load / no load)
• 24VDC input
• 48VDC input
309/5 317/8
154/4
mA
mA
159/7
*
When testing from 0% to 100% load working conditions load regulation index
of 5%
** 0%-5% load ripple&Noise is no more than 5%Vo. Test ripple and noise by “par-
allel cable” method; please see DC-DC Converter Application Notes for specific
operation.
*** This series of products using reduced frequency technology, the switching
frequency is test value for full load. When the load is reduced to below 50%,
the switching frequency decreases with decreasing load.
Reflected ripple current • 24VDC input
• 48VDC input
20
20
mA
mA
Input impulse voltage
(1sec. max.)
• 24VDC input
• 48VDC input
-0.7
-0.7
50
100
VDC
VDC
Starting voltage
• 24VDC input
• 48VDC input
9
18
VDC
VDC
Under-voltage
protection
• 24VDC input
• 48VDC input
5.5
12
6.5
15.5
VDC
VDC
Isolation specifications
Input filter
Hot plug
Pi
Item
Test condition
Min
Typ
13
Max
20
Units
VDC
Unavailable
Isolation voltage
Tested for 1 minute
and 1mA max
6000
Isolation resistance
Test at 500VDC
10000
MΩ
pF
Example:
6DAMW4_2405S6
6 = 6Watt; D = DIP; A = series; M = Medical; W4 = wide input (4:1)
24 = 9-36Vin; 5Vout; S = Single Output; 6 = 6000VDC isolation
Isolation capacitance Input-output,
100KHz/0.1V
Enhanced isolation
• Transformer
creepage
• Transformer
clearance
• PCB creepage
& clearance
• Optocoupler
creepage
8.0
5.0
8.0
8.0
mm
mm
mm
mm
Page 1 of 4
6DAMW4_6 – Rev. 2020-1.2
Specifications subject to change without notice.
GAPTEC-Electronic GmbH & Co. KG
sales@gaptec-electronic.com – www.gaptec-electronic.com
6DAMW4_6 series
6W - Single Output - 4:1 Ultra Wide Input - Isolated & Regulated
DIP DC-DC Converter
EMC specifications
EMI
CE
CISPR32/EN55032
IEC/EN61000-4-2
IEC/EN61000-4-4
IEC/EN61000-4-5
IEC/EN61000-4-6
CLASS A
Contact 6KV
2KV
(bare component)
perf. Criteria B
perf. Criteria B
perf. Criteria B
perf. Criteria A
perf. Criteria B
EMS
EMS
EMS
EMS
EMS
ESD
EFT
Surge
CS
(External Circuit Refer to recommended circuit, ①)
(External Circuit Refer to recommended circuit, ①)
2KV
3 Vr.m.s
Voltage dips, short and IEC/EN61000-4-29 0%-70%
interruptions immunity
Part Number
Input Voltage [VDC]
Output Voltage [VDC]
Current [mA]
Efficiency [%, @full load]
Capacative Load
[µF, max]
Nominal
24
Range
Max*
40
40
40
40
40
40
40
80
80
80
80
80
Max
1200
1000
667
Min
0
Min/Typ
6DAMW4_2405S6
6DAMW4_2406S6
6DAMW4_2409S6
6DAMW4_2412S6
6DAMW4_2415S6
6DAMW4_2418S6
6DAMW4_2424S6
6DAMW4_4805S6
6DAMW4_4809S6
6DAMW4_4812S6
6DAMW4_4815S6
6DAMW4_4824S6
9-36
9-36
9-36
9-36
9-36
9-36
9-36
18-75
18-75
18-75
18-75
18-75
5
6
79/81
79/81
81/83
82/84
83/85
83/85
82/84
79/81
81/83
82/84
83/85
82/84
2700
2200
1800
1000
680
24
0
24
9
0
24
12
15
18
24
5
500
400
333
0
24
0
24
0
1200
470
24
250
0
48
1200
667
0
2700
1800
1000
680
48
9
0
48
12
15
24
500
400
250
0
48
0
48
0
470
* Absolute maximum rating without damage on the converter, but it isn't recommended.
Typical characteristics
Operating temperature (°C)
Typical application
All the DC/DC converters of this series are tested according to the
recommended circuit (see Fig. 1) before delivery.
If it is required to further reduce input and output ripple, properly in-
crease the input & output of additional capacitors Cin and Cout or
select capacitors of low equivalent impedance provided that the capa-
citance is no larger than the max. capacitive load of the product.
Figure 1
Page 2 of 4
GAPTEC-Electronic GmbH & Co. KG
sales@gaptec-electronic.com – www.gaptec-electronic.com
6DAMW4_6 – Rev. 2020-1.2
Specifications subject to change without notice.
6DAMW4_6 series
6W - Single Output - 4:1 Ultra Wide Input - Isolated & Regulated
DIP DC-DC Converter
Efficiency
6DAMW4_2405S3
6DAMW4_2405S3
6DAMW4_4815S3
6DAMW4_4815S3
EMC solution-recommended circuit
Refer to the Cout in Typical application
The product does not support output in parallel with power per liter
Page 3 of 4
6DAMW4_6 – Rev. 2020-1.2
Specifications subject to change without notice.
GAPTEC-Electronic GmbH & Co. KG
sales@gaptec-electronic.com – www.gaptec-electronic.com
6DAMW4_6 series
6W - Single Output - 4:1 Ultra Wide Input - Isolated & Regulated
DIP DC-DC Converter
Mechanical dimensions
Note:
Unit: mm[inch]
Pin diameter tolerances: 0.10mm [ 0.004inch]
General tolerances: 0.50mm [ 0.020inch]
Note:
1. The max. capacitive load should be tested within the input voltage range and
under full load conditions;
2. All specifications measured at Ta = 25°C, humidity <75%, nominal input voltage
and rated output load unless otherwise specified.
3. In this datasheet, all the test methods of indications are based on corporate
standards.
4. The performance indexes of the product models listed in this datasheet are
as above, but some indexes of non-standard model products will exceed the
above-mentioned requirements, and please directly contact our technicians for
specific information.
5. Only typical models listed, other models may be different, please contact our
technical person for more details.
6. We can provide product customization service.
7. Products are related to laws and regulations: see "Features" and "EMC".
8. Our products shall be classified according to ISO14001 and related environmen-
tal laws and regulations, and shall be handled by qualified units.
Page 4 of 4
6DAMW4_6 – Rev. 2020-1.2
Specifications subject to change without notice.
GAPTEC-Electronic GmbH & Co. KG
sales@gaptec-electronic.com – www.gaptec-electronic.com
相关型号:
©2020 ICPDF网 联系我们和版权申明