6DAW4-S3 [GAPTEC]
6W - Single Output - 4:1 Wide Input - Isolated & Regulated;型号: | 6DAW4-S3 |
厂家: | GAPTEC |
描述: | 6W - Single Output - 4:1 Wide Input - Isolated & Regulated |
文件: | 总4页 (文件大小:847K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
6DAW4_S3 Series
6W - Single Output - 4:1 Wide Input - Isolated & Regulated
DIP DC-DC Converter
DC-DC Converter
6 Watt
The 6DAW4 series are specially designed for applications where a wide
range input voltage power supplies are isolated from the input power
supply in a distributed power supply system on a circuit board.
High Efficiency up to 88%
Operating Temperature:
-40°C to +85°C
3KVDC Input/Output Isolation
Short Circuit Protection SCP
(Automatic recovery)
No-load power consumption
as low as 0.12W
Over-voltage protection
Over-current protection
Input under-voltage protection
Meet CISPR22/EN55022
CLASS A
These products apply to:
1) Where the voltage of the input power supply is wide range
(voltage range≤ 4:1);
2) Where isolation is necessary between input and output
(isolation≤3000VDC);
Industry standard pin-out
RoHS Compliance
3) Where the regulation of the output voltage and the output ripple
noise are demanded.
Common specifications
Short circuit protection:
Cooling:
Output specifications
Continuous, automatic recovery
Free air convection
-40°C~+85°C
Item
Test condition
Min Typ
1
Max
3
Units
ꢀ
Output voltage
accuracy
Refer to recommended
circuit
Operation temperature range:
Storage temperature range:
Temperature rise at full load:
Lead temperature range:
Vibration:
Line regulation
(at full load)
Input voltage from low
to high
0.2
0.5
ꢀ
-55°C ~+125°C
40°C TYP
Load regulation
from 5ꢀ to 100ꢀ load
25ꢀ load step change
0.5
2.0
ꢀ
300°C MAX, 1.5mm from case for 10 sec
10-55Hz, 10G, 30 Min. along X, Y and Z
< 95ꢀ
Transient Recovery
Time
300
500
µs
Transient Response
Deviation
25ꢀ load step change
3
5
ꢀ
Storage humidity range:
Case material:
Plastic(UL94-V0)
Temperature drift
(Vout)
Refer to recommended
circuit
0.03 ꢀ/°C
MTBF (MIL-HDBK-217F@25°C):
Weight:
>1,000,000 hours
13g
Ripple & Noise*
20MHz Bandwidth
Input voltage range
85
120
mVp-p
ꢀVo
Over-voltage
protection
110
160
Input specifications
Over-current
protection
Input voltage range
110 140
300
190
ꢀIo
KHz
Item
Test condition
Min Typ
Max
Units
Input filter
Pi
Switching frequency PWM mode
Input current
(full load / no load)
24VDC input:
• 3.3V output
• 5V output
261/5 268/8 mA
301/5 309/8 mA
284/5 291/8 mA
*
Test ripple and noise by “parallel cable” method. See detailed operation
instructions at Testing of Power Converter section, application notes.
• other output
48VDC input:
• 3.3V output
• 5V output
131/4 134/7 mA
151/4 154/7 mA
142/4 145/7 mA
Model selection:
WCTV_xxyyN##
• other output
W= Watt; C= Case; T= Type; V=Voltage Variation (omitted 10ꢀ);
xx= Vin; yy=Vout; N= Numbers of Output; ##= Isolation (kVDC)
Reflected ripple current • 24VDC input
• 48VDC input
20
20
mA
mA
Example:
Input impulse voltage
(1sec. max.)
• 24VDC input
• 48VDC input
-0.7
-0.7
50
100
VDC
VDC
6DAW4_2405S3
6= 6Watt; D= DIP; A= series; W4= wide input (4:1) 9-36Vin; 5Vout;
D= Dual Output; 3= 3000VDC
Start-up voltage
Under-voltage turn-off
Starting time
• 24VDC input
• 48VDC input
9
18
VDC
VDC
• 24VDC input
• 48VDC input
5.5
14
6.5
15.5
VDC
VDC
Nominal input &
constant resistance
load
10
ms
Hot plug
Unavailable
Note:
1. The load shouldn‘t be less than 10ꢀ, otherwise ripple will increase
dramatically.
Isolation specifications
Item
2. Operation under 10ꢀ load will not damage the converter; However, they may
not meet all specifications listed.
3. All specifications measured at Ta=25°C, humidity<75ꢀ, nominal input voltage
and rated output load unless otherwise specified.
4. In this datasheet, all the test methods of indications are based on corporate
standards.
5. Only typical models listed, other models may be different, please contact our
technical person for more details.
Test condition
Min
Typ
Max
Units
VDC
Isolation voltage
Tested for 1 minute
and 1mA max
3000
Isolation resistance
Isolation capacitance
Test at 500VDC
1000
1000
MΩ
Input-output,
100KHz/0.1V
pF
Page 1 of 4
6DAW4_S3 – Rev. 2016-1.3
Specifications subject to change without notice.
GAPTEC-Electronic GmbH & Co. KG
sales@gaptec-electronic.com – www.gaptec-electronic.com
6DAW4_S3 Series
6W - Single Output - 4:1 Wide Input - Isolated & Regulated
DIP DC-DC Converter
EMC specifications
EMI
CE
CISPR22/EN55022
CLASS A (bare component)
CLASS B (External Circuit Refer to EMC recommended circuit, 2 )
EMI
RE
CISPR22/EN55022
CLASS A (bare component)
CLASS B (External Circuit Refer to recommended circuit, 2 )
EMS
EMS
EMS
EMS
EMS
EMS
ESD
RS
IEC/EN61000-4-2 Contact 4KV
IEC/EN61000-4-3 10V/m
perf. Criteria B
perf. Criteria A
perf. Criteria B
perf. Criteria B
perf. Criteria A
perf. Criteria B
EFT
Surge
CS
IEC/EN61000-4-4
IEC/EN61000-4-5
2KV
2KV
(External Circuit Refer to recommended circuit, 1 )
(External Circuit Refer to recommended circuit, 1 )
IEC/EN61000-4-6 3 Vr.m.s
IEC/EN61000-4-29 0ꢀ-70ꢀ
Voltage dips, short and
interruptions immunity
Part Number
Input Voltage [VDC]
Output Voltage [VDC]
Current [mA]
Max
Efficiency [%, Typ.]
Max. Capacative Load [µF]
Nominal
24
Range
Max*
40
40
40
40
40
40
80
80
80
80
80
Min
75
60
33
25
20
13
75
60
25
20
13
6DAW4_2403S3
6DAW4_2405S3
6DAW4_2409S3
6DAW4_2412S3
6DAW4_2415S3
6DAW4_2424S3
6DAW4_4803S3
6DAW4_4805S3
6DAW4_4812S3
6DAW4_4815S3
6DAW4_4824S3
9-36
3.3
5
1500
1200
667
79
83
87
88
88
87
79
83
88
88
87
2200
2200
1000
680
24
9-36
24
9-36
9
24
9-36
12
15
24
3.3
5
500
24
9-36
400
470
24
9-36
250
330
48
18-72
18-72
18-72
18-72
18-72
1500
1200
500
2200
2200
680
48
48
12
15
24
48
400
470
48
250
330
* Input voltage can’t exceed this value, or it will cause permanent damage.
Typical characteristics
Page 2 of 4
GAPTEC-Electronic GmbH & Co. KG
6DAW4_S3 – Rev. 2016-1.3
sales@gaptec-electronic.com – www.gaptec-electronic.com
Specifications subject to change without notice.
6DAW4_S3 Series
6W - Single Output - 4:1 Wide Input - Isolated & Regulated
DIP DC-DC Converter
Efficiency
6DAW4_2405S3
6DAW4_2405S3
6DAW4_4815S3
6DAW4_4815S3
Typical application
All the DC/DC converters of this series are tested according to the recom-
mended circuit (see Fig. 1) before delivery.
If it is required to further reduce input and output ripple, properly incre-
ase the input & output of additional capacitors Cin and Cout or select
capacitors of low equivalent impedance provided that the capacitance is
no larger than the max. capacitive load of the product.
Figure 1
Vin (VDC)
24
Cin (uF)
100
Cout (uF)
10
48
10~47
10
Page 3 of 4
6DAW4_S3 – Rev. 2016-1.3
Specifications subject to change without notice.
GAPTEC-Electronic GmbH & Co. KG
sales@gaptec-electronic.com – www.gaptec-electronic.com
6DAW4_S3 Series
6W - Single Output - 4:1 Wide Input - Isolated & Regulated
DIP DC-DC Converter
EMC solution-recommended circuit
Parameters
FUSE
MOV
Vin: 24V
Vin: 48V
Choose according to actual input current
S14K35
330µF/50V
2.2µF/50V
S14K60
C0
330µF/100V
2.2µF/100V
C1, C2
LCM
2.2µH
Refer to the Cout in Typical application
C3
Notes: Part 1 is used for EMS test and part 2 for EMI
filtering; selected based on needs.
EMC solution-recommended circuit PCB Layout
Recommended footprint
The product does not support output in parallel with power per liter.
Mechanical dimensions
Note:
Unit: mm[inch]
Pin diameter tolerances: 0.10mm [ 0.004inch]
General tolerances: 0.25mm [ 0.010inch]
Page 4 of 4
GAPTEC-Electronic GmbH & Co. KG
6DAW4_S3 – Rev. 2016-1.3
sales@gaptec-electronic.com – www.gaptec-electronic.com
Specifications subject to change without notice.
相关型号:
©2020 ICPDF网 联系我们和版权申明