6DAW_1215D1.5 [GAPTEC]
6W - Single/Dual Output - Wide Input - Isolated & Regulated;型号: | 6DAW_1215D1.5 |
厂家: | GAPTEC |
描述: | 6W - Single/Dual Output - Wide Input - Isolated & Regulated |
文件: | 总5页 (文件大小:2549K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
6DAW_1.5 Series
6W - Single/Dual Output - Wide Input - Isolated & Regulated
DIP DC-DC Converter
DC-DC Converter
6 Watt
Efficiency up to 88%
2:1 wide input voltage range
1.5KVDC input/output
isolation
Operating temperature:
-40°C ~ +85°C
Input under-voltage, over-
current, over-voltage protec-
tion
Meet CISPR32/EN55032 CLASS
A, without extra components
(except for 5VDC input)
The 6DAW_1.5 series are products of 6W output power, wide range of
voltage input of 4.5-9VDC, 9-18VDC, 18-36VDC, 36-75VDC, isolation volta-
ge of 1500VDC, input under-voltage protection, output over-voltage,
over-current, short circuit protection and EMI meets CISPR32/EN55032
CLASS A without external components (except for 5VDC input); these
products are widely used in fields such as industrial control, electric
power, instruments and communication.
Short circuit protection (SCP)
Low ripple & noise
International standard pin-out
EN62368 approved
Common specifications
Short circuit protection:
Cooling:
Output specifications
Continuous, automatic recovery
Free air convection
Item
Test condition
Min Typ
Max
Units
Output voltage
accuracy 1)
5VDC, 0%-100% load
• positive output
• negative output
others, 5%-100% load
• positive output
• negative output
1
1
2
3
%
%
Operation temperature range:
Storage temperature range:
Lead temperature range:
Storage humidity range:
Vibration:
-40°C~+85°C
-55°C ~+125°C
1
1
3
3
%
%
300°C MAX, 1.5mm from case for 10 sec
< 95%
Line regulation
(at full load)
Input voltage low to high
• positive output
• negative output
0.2
0.5
0.5
1
%
%
10-150Hz, 5G, 30 Min. along X, Y and Z
300KHz, PWM mode
Aluminium alloy
Switching frequency:
Case material:
Load regulation 2)
5VDC, 0%-100% load
• positive output
• negative output
others, 5%-100% load
• positive output
• negative output
1
1.5
%
%
MTBF (M1L-HDBK-217F @25°C):
Weight:
>1,000,000 hours
0.5
0.5
1
1.5
%
%
5VDC: 12g / Others: 14g
32.00 × 20.00 × 10.80mm
Dimensions:
Cross regulation
Dual output, primary output
50% loading, auxiliary output
10%-100% loading
5
%
Input specifications
Transient Recovery 25% load step change
Time
300
500
µs
Item
Test condition
Min
Typ
Max
Units
Input current
(full load/no load)
5VDC input
• 5V/ 5V output
• others
12VDC input
• 3.3V output
• others
Transient Response 25% load step change
1538/10 1578/30 mA
1428/10 1463/30 mA
Deviation
• 3.3V, 5V, 5V output
• others
5
3
8
5
%
%
Temperature
coefficient
Full load
0.03
%/°C
550/7
607/7
566/25
641/25
mA
mA
24VDC input
• 3.3V output
• others
48VDC input
• 3.3V output
• others
Ripple&Noise 3)
20MHz Bandwidth
Input voltage range
100
160
mVp-p
%Vo
265/7
296/7
272/25
313/25
mA
mA
Over-voltage
protection
110
110
131/7
147/7
134/25
155/25
mA
mA
Over-current
protection
Input voltage range
140
190
%lo
Reflected Ripple
Current
• 5VDC output
• others
50
20
mA
mA
1) At 0%~5% load, the max. output voltage accuracy of 5VDC output converter is 5%.
2) When testing from 0% to100%load working conditions load regulation index of 5%
3) Ripple & Noise at < 5% load is 5%Vo max. The ”parallel cable” method is used for
Ripple and Noise test.
Surge voltage
(1sec. max.)
• 5VDC input
• 12VDC input
• 24VDC input
• 48VDC input
-0.7
-0.7
-0.7
-0.7
16
VDC
VDC
VDC
VDC
25
50
100
Isolation specifications
Start-up Voltage
• 5VDC input
• 12VDC input
• 24VDC input
• 48VDC input
4.5
9
18
36
VDC
VDC
VDC
VDC
Item
Test condition
Min
Typ
Max
Units
VDC
Isolation voltage
Tested for 1 minute
and 1mA max
1500
Isolation resistance
Test at 500VDC
1000
MΩ
pF
Under-voltage
protection
• 5VDC input
• 12VDC input
• 24VDC input
• 48VDC input
3
3.5
6.5
15
VDC
VDC
VDC
VDC
5.5
13
26
Isolation capacitance
Input-output,
100KHz/0.1V
1000
30
Input filter
Hot plug
Pi filter
Example:
Unavailable
6DAW_2405D1.5
6= 6Watt; D= DIP; A= series; W= wide input (2:1) 18-36Vin; 5Vout;
D= Dual Output; 1.5= 1500VDC
Page 1 of 5
6DAW_1.5 – Rev. 2019-1.3
Specifications subject to change without notice.
GAPTEC-Electronic GmbH & Co. KG
sales@gaptec-electronic.com – www.gaptec-electronic.com
6DAW_1.5 Series
6W - Single/Dual Output - Wide Input - Isolated & Regulated
DIP DC-DC Converter
EMC specifications
EMI
CE
5VDC input: CISPR32/EN55032 CLASS B (see EMC recommended circuit, ②)
Others: CISPR32/EN55032 CLASS A (without external components) / CLASS B (see EMC recommended circuit, ②)
EMI
RE
5VDC input: CISPR32/EN55032 CLASS B (see EMC recommended circuit, ②)
Others: CISPR32/EN55032 CLASS A (without external components) / CLASS B (see EMC recommended circuit, ②)
EMS
EMS
EMS
EMS
EMS
ESD
RS
IEC/EN61000-4-2
IEC/EN61000-4-3
IEC/EN61000-4-4
IEC/EN61000-4-5
IEC/EN61000-4-6
Contact 4KV
10V/m
perf. Criteria B
perf. Criteria A
EFT
Surge
CS
2KV
perf. Criteria B (see EMC recommended circuit, ①)
perf. Criteria B (see EMC recommended circuit, ①)
perf. Criteria A
line to line 2KV
3 Vr.m.s
Part Number
Input Voltage [VDC]
Output Voltage
[VDC]
Current
Efficiency 2)
[%, Typ.]
Capacitive load 3)
[µF, max.]
Nominal
Range
4.5-9
4.5-9
4.5-9
4.5-9
9-18
Max 1)
12
[mA, max.]
6DAW_0505S1.5
6DAW_0512S1.5
6DAW_0515S1.5
6DAW_0524S1.5
6DAW_1203S1.5
6DAW_1205S1.5
6DAW_1212S1.5
6DAW_1215S1.5
6DAW_1224S1.5
6DAW_2403S1.5
6DAW_2405S1.5
6DAW_2412S1.5
6DAW_2415S1.5
6DAW_2424S1.5
6DAW_4803S1.5
6DAW_4805S1.5
6DAW_4812S1.5
6DAW_4815S1.5
6DAW_4824S1.5
6DAW_0505D1.5
6DAW_0512D1.5
6DAW_0515D1.5
6DAW_0524D1.5
6DAW_1205D1.5
6DAW_1212D1.5
6DAW_1215D1.5
6DAW_1224D1.5
6DAW_2405D1.5
6DAW_2412D1.5
6DAW_2415D1.5
6DAW_2424D1.5
6DAW_4805D1.5
6DAW_4812D1.5
6DAW_4815D1.5
6DAW_4824D1.5
5
5
12
15
24
3.3
5
1200
500
400
250
1500
1200
500
400
250
1500
1200
500
400
250
1500
1200
500
400
250
600
250
200
125
78
84
84
84
75
80
84
85
85
78
82
85
86
86
79
83
87
88
87
78
84
84
84
80
84
85
84
83
86
87
85
83
87
85
85
1000
470
220
100
5
12
5
12
5
12
12
12
12
12
12
24
24
24
24
24
48
48
48
48
48
5
20
20
20
20
20
40
40
40
40
40
80
80
80
80
80
12
1800
1000
470
220
100
9-18
9-18
12
15
24
3.3
5
9-18
9-18
18-36
18-36
18-36
18-36
18-36
36-72
36-72
36-72
36-72
36-72
4.5-9
4.5-9
4.5-9
4.5-9
9-18
1800
1000
470
220
100
12
15
24
3.3
5
1800
1000
470
220
100
12
15
24
5
1000
470
220
100
5
12
12
15
24
5
5
12
5
12
12
12
12
12
24
24
24
24
48
48
48
48
20
20
20
20
40
40
40
40
80
80
80
80
600
250
200
125
680
330
9-18
12
15
24
5
9-18
220
100
9-18
18-36
18-36
18-36
18-36
36-72
36-72
36-72
36-72
600
250
200
125
680
330
12
15
24
5
220
100
600
250
200
125
680
330
12
15
24
220
100
1) Exceeding the maximum input voltage may cause permanent damage;
2) Efficiency is measured In nominal input voltage and rated output load;
3) The specified maximum capacitive load for positive and negative output is identical.
Page 2 of 5
6DAW_1.5 – Rev. 2019-1.3
Specifications subject to change without notice.
GAPTEC-Electronic GmbH & Co. KG
sales@gaptec-electronic.com – www.gaptec-electronic.com
6DAW_1.5 Series
6W - Single/Dual Output - Wide Input - Isolated & Regulated
DIP DC-DC Converter
Efficiency
Page 3 of 5
6DAW_1.5 – Rev. 2019-1.3
Specifications subject to change without notice.
GAPTEC-Electronic GmbH & Co. KG
sales@gaptec-electronic.com – www.gaptec-electronic.com
6DAW_1.5 Series
6W - Single/Dual Output - Wide Input - Isolated & Regulated
DIP DC-DC Converter
Typical characteristics
Typical application
All the DC/DC converters of this series are tested according to the re-
commended circuit before delivery.
If it is required to further reduce input and output ripple, properly incre-
ase the input & output of additional capacitors Cin and Cout or select
capacitors of low equivalent impedance provided that the capacitance
is no larger than the max. capacitive load of the product.
EMC recommended circuit
Model
FUSE
C0
Vin: 5V
Choose according to actual input current
2200µF/35V
C1/C2
C3
4.7µF/50V
Refer to the Cout in Typical application
C4
100µF/35V
2.2µH
LCM1
CY1, CY2
2.2nF/2kV
Model
FUSE
MOV
C0
Vin: 12V
Vin: 24V
Vin: 48V
Choose according to actual input current
S14K20
S20K30
S14K60
1000µF/35V
1000µF/50V
680µF/100V
1µF/100V
C1
1µF/50V
C2
100µF/35V
100µF/50V
100µF/100V
C3
Refer to the Cout in recommended circuit
LDM1
CY1, CY2
4.7µH
For EMC tests we use Part ① for immunity and part ② for emissions test.
Selecting based on needs.
1nF/2kV
Page 4 of 5
GAPTEC-Electronic GmbH & Co. KG
sales@gaptec-electronic.com – www.gaptec-electronic.com
6DAW_1.5 – Rev. 2019-1.3
Specifications subject to change without notice.
6DAW_1.5 Series
6W - Single/Dual Output - Wide Input - Isolated & Regulated
DIP DC-DC Converter
Mechanical dimensions
Note:
1. The maximum capacitive load offered were tested at input voltage range and
full load;
2. Unless otherwise specified, parameters in this datasheet were measured under
the conditions of Ta=25°C, humidity<75%RH with nominal input voltage and
rated output load;
3. All index testing methods in this datasheet are based on company corporate
standards;
4. We can provide product customization service, please contact our technicians
directly for specific information;
5. Products are related to laws and regulations: see „Features“ and „EMC“;
6. Our products shall be classified according to ISO14001 and related environmen-
tal laws and regulations, and shall be handled by qualified units.
Page 5 of 5
6DAW_1.5 – Rev. 2019-1.3
Specifications subject to change without notice.
GAPTEC-Electronic GmbH & Co. KG
sales@gaptec-electronic.com – www.gaptec-electronic.com
相关型号:
©2020 ICPDF网 联系我们和版权申明