6DMW_2405S1.5 [GAPTEC]
6W - Dual/Single Output - Wide Input - Isolated & Regulated;
| 型号： | 6DMW_2405S1.5 |
| 厂家： | 
GAPTEC |
| 描述： | 6W - Dual/Single Output - Wide Input - Isolated & Regulated |
| 文件： | 总4页 (文件大小：1517K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
6DMW_1.5 Series
6W - Dual/Single Output - Wide Input - Isolated & Regulated
SMD package - DC-DC Converter
DC-DC Converter
6 Watt
Efficiency up to 87%
Input under-voltage
Output over-voltage
Output over-current
Meet CISPR22/EN55022
CLASS A (without external
components)
Int. standard pin-out
UL60950, EN60950 and
IEC60950 approval
The 6DMW series are isolated 6W DC-DC products with 2:1 input voltage.
They feature efficiency up to 87%, 1500VDC isolation, operating tempe-
rature of -40°C to +85°C, input under-voltage protection, output over-
voltage, over-current, short circuit protection and EMI meets CISPR22/
EN55022 CLASS A. Widely applied in medical care, industrial control,
electric power, instruments and communication fields, they apply to:
2:1 wide input voltage range
1.5kVDC isolation
Short circuit protection (SCP)
No-load power consumption
as low as 0.12W
Operating temperature:
-40°C ~ +85°C
1) Where the voltage of the input power supply is wide range
(voltage range ≤2:1);
2) Where isolation is necessary between input and output
(isolation ≤1500VDC);
3) Where the regulation of the output voltage and the output ripple
noise are demanded.
UL-60950-1 (E347551)
Common specifications
Short circuit protection:
Cooling:
Output specifications
Continuous, automatic recovery
Free air convection
Item
Test condition
Min
Typ
1
Max
3
Units
%
Output voltage
accuracy
• 5%-100% load
• 0%-5% load
Operation temperature range:
Storage temperature range:
Lead temperature range:
Maximum case temperature:
-40°C~+85°C
-
5V output
2
1
5
3
%
%
- others
-55°C ~ +125°C
Output voltage
balance
Dual output, balance
load
0.5
1.5
%
300°C MAX, 1.5mm from case for 10 sec
105°C (Operating Temperature curve
range)
Line regulation
Full load, input volta-
ge from low to high
• positive output
Storage humidity range:
Vibration:
< 95% (non condensing)
10-55Hz, 10G, 30 Min. along X, Y and Z
300KHz TYP (PWM mode)
Aluminium alloy
0.2
0.5
0.5
1
%
%
• negative output
Load regulation
Cross regulation
5% to 100% load
• positive output
• negative output
Switching frequency*:
Case material:
0.5
0.5
1
1.5
%
%
Dual output, main
circuit with 50% load,
auxiliary circuit with
10%-100% load
5
%
MTBF (M1L-HDBK-217F):
Weight:
>1,000,000 hours
14g
* This series of products using reduced frequency technology, the switching
frequency is test value of full load,When the load is reduced to below 50%, the
switching frequency decreases with decreasing load.
Transient recove-
ry time
25% load step change
300
500
µs
Transient respon-
se deviation
25% load step change
• 3.3V, 5V, 5V output
• others
Input specifications
5
3
8
5
%
%
Item
Test condition
Min
Typ
Max
Units
mA
Temperature drift 100% full load
0.03 %/°C
85 mVp-p
Input current
(full load/no load)
• 12VDC input
• 24VDC input
- 3.3V output
- others
603/10
633/22
Ripple&Noise*
20MHz Bandwidth
Input voltage range
60
268/5
296/5
275/15
313/15
mA
mA
Over voltage
protection
110
110
160
%Vo
Reflected ripple current
20
mA
Over current
protection
Input voltage range
140
190
%lo
Surge voltage
(1sec. max.)
• 12VDC input
• 24VDC input
-0.7
-0.7
25
50
VDC
VDC
Starting voltage
• 12VDC input
• 24VDC input
9
18
VDC
VDC
* 0%-5% load ripple&noise is no more than 5%Vo. Ripple and noise tested by
“parallel cable” method. See DC-DC Converter Application Notes for specific
operation.
Under-voltage turn-off
• 12VDC input
• 24VDC input
5.5
12
6.5
15.5
VDC
VDC
Example:
Input filter
Hot plug
Pi
6DMW_2405D1.5
Unavailable
6 = 6Watt; D = DIP; M = series; W = wide input (2:1) 9-36Vin;
5Vout; D = Dual Output; 1.5 = 1500VDC
Isolation specifications
Item
Test condition
Min
Typ
Max
Units
VDC
Isolation voltage
Tested for 1 minute
and 1mA max
1500
Isolation resistance
Test at 500VDC
1000
MΩ
pF
Isolation capacitance Input/Output
100KHz/0.1V
1000
Page 1 of 4
GAPTEC-Electronic GmbH & Co. KG
sales@gaptec-electronic.com – www.gaptec-electronic.com
6DMW_1.5 – Rev. 2020-1.3
Specifications subject to change without notice.
6DMW_1.5 Series
6W - Dual/Single Output - Wide Input - Isolated & Regulated
SMD package - DC-DC Converter
EMC specifications
EMI
CE
CISPR22/EN55022
CLASS A (without external circuit)
CLASS B (see EMC recommended circuit, 2 )
EMI
RE
CISPR22/EN55022
CLASS A (without external circuit)
CLASS B (see EMC recommended circuit, 2 )
EMS
EMS
EMS
EMS
EMS
EMS
ESD
RS
IEC/EN61000-4-2
IEC/EN61000-4-3
IEC/EN61000-4-4
IEC/EN61000-4-5
IEC/EN61000-4-6
Contact 4KV
10V/m
perf. Criteria B
perf. Criteria A
EFT
Surge
CS
2KV
perf. Criteria B (see EMC recommended circuit, 1 )
line to line 2KV perf. Criteria B (see EMC recommended circuit, 1 )
3 Vr.m.s
perf. Criteria A
perf. Criteria B
Voltage dips, short
and interruptions
immunity
IEC/EN61000-4-29 0%-70%
Part Number
Input Voltage [VDC]
Output Voltage
Output current [mA]
Capacitive load
[µF, Max.]
Efficiency** [%, Typ.]
Nominal
Range
Max*
20
[VDC]
Max
1200
500
1500
1200
500
400
250
Min
6DMW_1205S1.5
6DMW_1212S1.5
6DMW_2403S1.5
6DMW_2405S1.5
6DMW_2412S1.5
6DMW_2415S1.5
6DMW_2424S1.5
6DMW_1205D1.5
6DMW_1212D1.5
6DMW_2405D1.5
6DMW_2412D1.5
6DMW_2415D1.5
12
9-18
5
0
1000
470
1800
1000
470
220
100
81
85
77
82
85
86
85
81
12
9-18
20
12
3.3
5
0
24
18-36
18-36
18-36
18-36
18-36
9-18
40
40
40
40
40
20
0
24
0
24
12
15
24
5
0
24
0
24
0
12
600
250
0
470
100
12
9-18
20
12
5
0
85
83
87
87
24
18-36
18-36
18-36
40
40
40
600
250
0
470
100
24
12
15
0
24
200
0
100
*
Absolute maximum rating without damage on the converter, but it isn‘t recommended.
** Efficiency is measured in nominal input voltage and rated output load.
Typical characteristics
Page 2 of 4
6DMW_1.5 – Rev. 2020-1.3
Specifications subject to change without notice.
GAPTEC-Electronic GmbH & Co. KG
sales@gaptec-electronic.com – www.gaptec-electronic.com
6DMW_1.5 Series
6W - Dual/Single Output - Wide Input - Isolated & Regulated
SMD package - DC-DC Converter
Efficiency
6DMW_2415D1.5
6DMW_2415D1.5
6DMW_2405S1.5
6DMW_2405S1.5
Typical application
All the DC/DC converters of this series are tested according to the re-
commended circuit (see Fig. 1) before delivery.
If it is required to further reduce input and output ripple, properly in-
crease the input & output of additional capacitors Cin and Cout or
select capacitors of low equivalent impedance provided that the capa-
citance is no larger than the max. capacitive load of the product.
The product does not support output in parallel with power per liter
use.
Vin (VDC)
Cin (µF)
100
Cout (µF)
12
10
10
24
10-47
Figure 1
Page 3 of 4
GAPTEC-Electronic GmbH & Co. KG
sales@gaptec-electronic.com – www.gaptec-electronic.com
6DMW_1.5 – Rev. 2020-1.3
Specifications subject to change without notice.
6DMW_1.5 Series
6W - Dual/Single Output - Wide Input - Isolated & Regulated
SMD package - DC-DC Converter
EMC recommended circuit
Parameters
FUSE
MOV
Vin: 24V
Vin: 48V
Choose according to actual input current
S14K20
S20K30
C0
1000µF/35V
1000µF/50V
6DMW
C1
1µF/50V
C2
Refer to the Cout in recommended circuit
LDM1
CY1/ CY2
4.7µH
1nF/2kV
Part ①1 is for EMS test, part ②2 is for EMI filtering; parts
①
can be added based on actual requirement.
Mechanical dimensions and foot-
Note:
Unit: mm[inch]
Grid: 2.54*2.54mm.
Pin diameter tolerances: 0.10mm [ 0.004inch]
General tolerances: 0.50mm [ 0.020inch]
Note:
1. The recommended unbalance degree of the dual output module load is
≤ 5%; if the degree exceeds 5%, than the product performance cannot
be guaranteed to comply with all parameters in the datasheet. Please
contact our technicians directly for specific information;
2. The maximum capacitive load offered were tested at input voltage range
and full load;
3. Unless otherwise specified, parameters in this datasheet were measured
under the conditions of Ta=25 , humidity<75%RH with nominal input
voltage and rated output load;
4. All index testing methods in this datasheet are based on Company’s
corporate standards;
5. We can provide product customization service, please contact our
technicians directly for specific information;
6. Specifications are subject to change without prior notice.
Page 4 of 4
GAPTEC-Electronic GmbH & Co. KG
sales@gaptec-electronic.com – www.gaptec-electronic.com
6DMW_1.5 – Rev. 2020-1.3
Specifications subject to change without notice.
相关型号：
©2020 ICPDF网 联系我们和版权申明