75ACP_48S [GAPTEC]

75W - Single Output AC-DC Converter - Universal Input - Isolated & Regulated;
75ACP_48S
型号: 75ACP_48S
厂家: GAPTEC    GAPTEC
描述:

75W - Single Output AC-DC Converter - Universal Input - Isolated & Regulated

文件: 总3页 (文件大小:864K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
75ACP_S Series  
75W - Single Output AC-DC Converter - Universal Input - Isolated & Regulated  
AC-DC Converter  
75 Watt  
High efficiency up to 88%  
Universal AC input range  
(90~264VAC)  
Wide operating ambient  
temperature (-25°C~70°C)  
Operating altitude  
up to 5000M  
The 75ACP_S series features standard rail mounting, energy efficiency  
and is highly cost-effective. The series offers stability and high noise  
immunity especially for industrial control equipment, machinery and  
other demanding environments for industrial equipment. This conver-  
ter offers a compact and light weight design with and standard rail ins-  
tallation (35mm). Furthermore this series offers Easy Fuse Tripping due  
and a built-in DC OK relay contact. The converter can be installed on  
TS-35/7.5 or TS-35/15.  
Withstand 300VA surge input  
for 5 sec.  
No Load power  
Over voltage protection (OVP)  
Over load protection (OLP)  
Short circuit protection (SCP)  
consumption<0.5W  
PCB soldering side with  
conformal coating  
UL-60950-1 (E347551)  
Common specifications  
Short circut protection:  
Temperature rise at full load:  
Cooling:  
Input specifications  
Long-term mode, automatic recovery  
40°C MAX  
Input voltage range  
Input frequency  
AC current  
90~264VAC  
47~63Hz  
2.5A (max)  
60A (max)  
Free air convection  
-25°C~+70°C  
Inrush current  
Cold start,  
230VAC  
Operation temperature range:  
Storage temperature range:  
Storage humidity range:  
Temperature coefficient:  
MTBF (using MIL-HDBK-217F):  
Safety standards:  
-40°C ~+85°C  
Leakage current  
(input 264Vac, 63Hz)  
Input—output: <0.25mA  
Input—PG: <3.5mA  
< 95%  
0.03%/°C MAX  
+25°C >200,000 hours  
UL60950-1; EN60950-1 2006  
Output specifications  
Item  
Test conditions  
Full load  
Min Typ  
Max  
1
Units  
%
Case material:  
Heat-resistant Plastic (UL94-V0) and  
metal  
Output voltage  
accuracy  
Dimensions (L*W*H):  
Weight:  
129×98×38mm  
473g  
Voltage adjustment •5V: 4.75~5.5V  
range  
•12V: 11.4~13.2V  
•15V: 14.25~16.5V  
•24V: 22.8~26.4V  
•48V: 45.6~52.8V  
Isolation specifications  
Line regulation  
Vin= min. to max. at  
full load  
0.5  
%
Item  
Test condition  
Min  
Typ  
Max  
Units  
VAC  
Load regulation  
Set-up time  
0% to 100% load  
1
1
%
s
Withstand voltage*  
• Primary-Sec.: 10mA  
• Primary-PG: 10mA  
• Secondary-PG: 10mA  
3000  
1500  
500  
@230VAC input, full  
load  
Isolation resistance  
100  
MΩ  
Hold-up time  
(full load)  
@230VAC input  
20  
ms  
%
* Input-Output, tested for 1 minute, 500VDC and leakage current less than 1mA  
Overshoot and  
undershoot  
5
Protection specifications  
Switching fre-  
quency  
100  
KHz  
Over-load  
protection  
•5V: 12.6~18A  
•12V: 6.3~9A  
•15V: 5.25~7.5A  
•24V: 3.36~4.8A  
•48V: 1.7~2.43A  
Protection type:  
5V is hiccup mode, rest  
are constant power, auto  
recovery  
* Measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated  
with a 0.1 uF & 10uF parallel capacitor.  
Example:  
75ACP_24S  
Over-voltage  
protection  
•5V: 5.5~7.5V  
Protection type:  
constant voltage, auto  
recovery  
•12V: 13.2~18V  
•15V: 16.5~22.5V  
•24V: 26.4~36V  
•48V: 52.8~72V  
75 = 75Watt  
AC = AC-DC  
P = series  
24 = 24 Vout  
S = single output  
Note:  
1. All parameters NOT specially mentioned are measured at 230VAC input, rated  
load and 25°C of ambient temperature.  
Page 1 of 3  
75ACP_S – Rev. 2020-1.1  
Specifications subject to change without notice.  
GAPTEC-Electronic GmbH & Co. KG  
sales@gaptec-electronic.com – www.gaptec-electronic.com  
75ACP_S Series  
75W - Single Output AC-DC Converter - Universal Input - Isolated & Regulated  
EMC specifications  
EMC / Conduction & Radiation  
EMC / Harmonic current  
EMC / Immunity  
Compliance to EN55022, Class B / FCC Part15 B  
Compliance to EN61000-3-2, Class A  
Compliance to EN61000-4-2, -3, -4, -5, -6, -8, -11  
The SPS is considered as a component which will be installed into a final equipment.  
The final equipment must be re-confirmed that it still meets EMC directives.  
Approval  
Model  
Power  
[W]  
Output  
[Vo, VDC]  
Rated Current  
[A]  
Current Range  
[A]  
Ripple&Noise* [mV,  
typ]  
0~70°C -25~0°C  
Efficiency  
[%, typ]  
UL  
UL  
UL  
UL  
UL  
75ACP_05S  
75ACP_12S  
75ACP_15S  
75ACP_24S  
75ACP_48S  
75  
75  
75  
75  
75  
5
12  
6
0~12  
0~6  
50  
80  
80  
80  
120  
80  
200  
200  
200  
240  
79  
84  
12  
15  
24  
48  
5
0~5  
86  
3.2  
1.6  
0~3.2  
0~1.6  
86.5  
88  
Measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1 uF & 10uF parallel capacitor.  
Mechanical dimensions  
Page 2 of 3  
75ACP_S – Rev. 2020-1.1  
Specifications subject to change without notice.  
GAPTEC-Electronic GmbH & Co. KG  
sales@gaptec-electronic.com – www.gaptec-electronic.com  
75ACP_S Series  
75W - Single Output AC-DC Converter - Universal Input - Isolated & Regulated  
Typical characteristics  
Derating Curves  
INPUT (VAC)  
AMBIENT TEMPERATURE (°C)  
Functional block diagram  
Functional diagram  
Page 3 of 3  
GAPTEC-Electronic GmbH & Co. KG  
sales@gaptec-electronic.com – www.gaptec-electronic.com  
75ACP_S – Rev. 2020-1.1  
Specifications subject to change without notice.  

相关型号:

75ACP_S

75W - Single Output AC-DC Converter - Universal Input - Isolated & Regulated
GAPTEC

75ACT16623

16-BIT BUS TRANSCEIVERS WITH 3-STATE OUTPUTS
TI

75ACT16623DL

16-BIT BUS TRANSCEIVERS WITH 3-STATE OUTPUTS
TI

75ACT16623DLR

Bus Transceiver
ETC

75AF36-01-1-02N

Rotary Switch, 2 Positions, SPDT, Latched, 0.2A, 30VDC, Solder Terminal, Screw Driver Slot Actuator, Through Hole-straight,
GRAYHILL

75AF36-01-1-02N-C

Rotary Switch, 2 Positions, SPDT, Latched, 0.2A, 30VDC, Solder Terminal, Screw Driver Slot Actuator, Through Hole-straight, ROHS COMPLIANT
GRAYHILL

75AF36-01-1-02N-F

Rotary Switch, 2 Positions, SPDT, Latched, 0.2A, 30VDC, Solder Terminal, Screw Driver Slot Actuator, Through Hole-straight, ROHS COMPLIANT
GRAYHILL

75AF36-01-1-03N

Rotary Switch, 3 Positions, SP3T, Latched, 0.2A, 30VDC, Solder Terminal, Screw Driver Actuator, Through Hole-straight, ROHS COMPLIANT
GRAYHILL

75AF36-01-1-03N-C

Rotary Switch, 3 Positions, Maintained, 0.2A, 30VDC, Solder Lug Terminal, Rotary Screw Actuator, Panel Mount,
GRAYHILL

75AF36-01-1-04N

Rotary Switch, 4 Positions, SP4T, Latched, 0.2A, 30VDC, Solder Terminal, Screw Driver Slot Actuator, Through Hole-straight,
GRAYHILL

75AF36-01-1-05N

Rotary Switch, 5 Positions, SP5T, Latched, 0.2A, 30VDC, Solder Terminal, Screw Driver Slot Actuator, Through Hole-straight,
GRAYHILL

75AF36-01-1-05N-F

Rotary Switch, 5 Positions, Maintained, 0.2A, 30VDC, Solder Lug Terminal, Rotary Screw Actuator, Panel Mount,
GRAYHILL