10-40556-15G112 [GLENAIR]
Connector Accessory, Contact, Copper Alloy,;型号: | 10-40556-15G112 |
厂家: | Glenair |
描述: | Connector Accessory, Contact, Copper Alloy, |
文件: | 总25页 (文件大小:1806K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
CONNECTOR CONTACTS
IT - ITS - ITS-RG - ITZ Connectors
Series Presentation
Contacts in this chapter can be used for the following circular connector series:
IT, ITZ, ITS and ITS RG.
A
Threaded IT series have been designed to be fully conform to all material and per-
formance requirements of MIL-DTL-ꢀ01ꢀ specification. IT circular connectors, de-
signed and used in the military market have wide applications in todays industry
where strenght, reliability and ease of availability in other countries is essential.
ITZ presents same characteristics of IT series except for a special trape-
zoidal threading system, assured by a rubber o-ring that makes it an ex-
cellent choice for amphibious military veichles and railway applications.
The Glenair Series ITS and ITS-RG connector series are based on the MIL-
DTL-ꢀ01ꢀ standard, but feature an improved reverse bayonet coupling tech-
nology in place of the threaded coupling used in MIL-DTL-ꢀ01ꢀ. The 3-point
bayonet coupling mechanism reduces coupling time and provides eas-
ier mating when the connector is in an awkward position. Positive lock-
ing of the three stainless steel pins provides reliable resistance to vibration
and shock, and prevents connector de-coupling in even the most rugged
applications such as locomotives, mass-transit cars and military vehicles.
he ITS-RG Series incorporates a ruggedized outer coating of rubber for addi-
onal mechanical strength and to prevent shell damage due to rough handling.
Supported contact types include solder, crimp, and PCB versions in both gold or silver surface platings.
Standard materials are Copper Alloys (Brass) or High Conductivity Copper Alloys (eg. CuTe) according ampacity
or customer request anyway. Special parts of them are made by special material too, as well for special applica-
tions wThermocouple contacts are also available.
© 2016 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-600Catalog Title
Dimensions in Inches (millimeters) are subject to change withou
A-5
CONNECTOR CONTACTS
IT - ITS - ITS-RG - ITZ Connectors
Contact Retention System
ITS Series Example
Wall Mount Receptacle
A
Insert
Insert
Socket Contact
Pin Contact
ITS Series Example
Straight Plug
Insert
(Rubber Compound)
Contact
(Copper Alloy)
All our connector series IT, ITS, ITS-RG and ITZ, that are based on MIL-DTL-ꢀ01ꢀ and VG9ꢀ234 military
standards, have a special insert in synthetic rubber that hold in place the contacts.
In fact the contact is mantained in its position thanks to:
-
-
The mechanical interference between contact and insert surfaces profiling
The mechanical friction between metal contact and rubber insert materials
Retention force for each contact part number, male or female, is according the above specifications,
validated during connector qualification phase and periodically checked.
© 2016 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Catalog Title
Dimensions in Inches (millimeters) are subject to change without notice.
A-6
CONNECTOR CONTACTS
IT - ITS - ITS-RG - ITZ Connectors
Contact Mating Types
For these contact series we can offer different types of mating technologies between pin and socket.
According size, ampacity, contact material or specific customer request, there are four types of socket mating
end style as per the drawings below.
A
Pin contact mantaon/design.
Socket Contact
Internal Clip Type
Standard for Size 20
Socket Contact
Pencil Clip Type
Standard for Size16 and 12
Socket Contact
Tulip Pressure Member With Hood
Standard from Size 8 to 4/0
Socket Contact
Louver Band
Optional from Size 4 to 4/0
Pin Contact
Standard Configuration
From Size 22 to 4/0
Please consult our Sales Department for other options.
© 2016 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Catalog Title
Dimensions in Inches (millimeters) are subject to change without notice.
A-7
CONNECTOR CONTACTS
IT - ITS - ITS-RG - ITZ Connectors
Contact Electrical Performances
CURRENT RATING AND CONTACT RESISTANCE TABLE
Current Rating 1
A
Max. Contact
Resistance (mΩ)
Contact Size
A @ 20°C 2
A @ 80°C
20
1ꢂ
1ꢃ
12
ꢂ
ꢁ.ꢀ
10
22
41
ꢁ3
ꢁ.ꢀ
ꢁ.ꢀ
13
23
4ꢃ
12.0
12.0
ꢃ.0
3.0
1.0
4
0
4/0
13ꢀ
24ꢀ
3ꢀ0
ꢂ0
1ꢀ0
22ꢀ
0.ꢀ
0.3
0.2
Note . Indicated temperatures are the temperature of the ambient/air where the connector is placed, at
“connector power”OFF.
CURRENT RATING GRAPHIC (DERATING CURVES)
#4/0
#0
#4
#8
#12
#16
#18
#20
Ambient Temperature (°C)
© 2016 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Catalog Title
Dimensions in Inches (millimeters) are subject to change without notice.
A-8
CONNECTOR CONTACTS
IT - ITS - ITS-RG - ITZ Connectors
Contacts - Material, Plating and Type
MATERIAL AND PLATING
A
Plating
Contact Size
Material
Standard
Optional
Copper Alloy
(CuZn)
20 - 1ꢃ - 12 - ꢂ
Gold
or
Silver
Heavy Gold
High Conductivity
Copper Alloy
(CuTe)
4 - 0 - 2/0 - 4/0
MATERIAL
Signal and Power Contacts
Choice of body material for the contacts is generally driven by two main factors:
● Current rate
● Connection type between wire and contact (solder or crimp)
What in the table above is the standard for us, changes can be discussed with the customer.
Thermocouple Contacts
For sizes 1ꢃ and 12 are available thermocouple materials, in a lot of arrangments as showed in the dedicated
pages for each connector series.
Materials we can supply for this application are:
●
●
●
●
●
Chromel
Alumel
Iron
Constantan
Copper
© 2016 Glenair, Inc • 121www.glenair.com • U.S. CAGE code 06324 • Catalog Title
Dimensions in Inches (millimeters) are subject to change without notice.
A-ꢄ
CONNECTOR CONTACTS
IT - ITS - ITS-RG - ITZ Connectors
Contacts - Material, Plating and Type
PLATING
Silver plating is the standard finish for these connector series, thickess of 3µm as minimum on a suitable under-
plating layer (3µm +3/-0). We can provide as optional platings our standard Gold thick 0,4µm +0,2/-0, or our im-
A
proved wearing resistance Heavy gold with a thickness of 0,ꢂµm +0,2/-0
.
Performances of our electroplated precious metal are tested by our internal qualified ISO/IEC 1ꢁ02ꢀ Laboratory
according ASTM B-ꢁ00, MIL-DTL-4ꢀ204 and SAE AS39029 specifications.
WIRE TERMINATION
Connectors of the series IT, ITS, ITS-RG and ITZ can be supplied both with crimp contacts to be assembled later
into the insert, or with solder contacts already installed into the connector. Solder type contact is available in the
PCB version also (PC TAIL).
Crimp technology requires a specific and dedicated crimping tool according material used, size, wire barrel
design, etc. To guarantee a reliable termination for each contact, Glenair offers the right tool and accessories
combination, from leading crimp tools manufacturers, according the tables in the “Crimping Tools”section of
this catalog.
Since connectors for crimp contacts can be bought with or without contacts, therefore you can buy crimp con-
tacts as spare parts also, according the full list in the “Part Numbering”section.
When you buy a contact as spare, not in bundle with the connector, pay attention to add the plating type at the
end of p/n (see “How To Order”in the A-9 page).
Most of the standard crimp contacts offered for the series IT, ITS, IT-RG and ITZ have own special versions, with a
modified wire barrell, in order to accomodate smaller and/or larger wire size than standard one.
The complete list of these contacts is again in the Part Numbers section.
Crimp (Wire) Barrel
Soldering Cup
Pc Tail
© 2016 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Catalog Title
Dimensions in Inches (millimeters) are subject to change without notice.
A-ꢅꢆ
CONNECTOR CONTACTS
IT - ITS - ITS-RG - ITZ Connectors
How to Order (Only Crimp)
How to order
Sample Part Number
10ꢀ113474ꢀ4P ꢀXX YY
Basic Part Number
Dash Version
10-113474-4P
A
Omitted for standard
G10 = Silver
Plating
G117 = Gold (0.4 µm)
G112 = Heavy Gold (0.ꢂ µm)
58 - Can accept an AWG ꢃ wire instead of the standard AWG 4
"How to Order " Example: 10-113474-4P-58G10
10-113474-4P - male contact, size 4 and mating size
G10 - Silver Plated
Important Notice: When you buy a connector of the IT, ITZ, ITS and ITS-RG series, their standard configuration
include the std contact p/n (bold in the following tables), silver plated. Different needs have to be specified in
the “How to order”configuration part number of the connector as follow:
- G10 Silver plated contacts: (to be omitted)
- G117 Gold plated contact: add B1 in the Modification Code
- G112 Heavy Gold plated contact: add B12 in the Modification Code
For the special wire barrels (Dash Version) and other options please consult factory.
© 2016 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Catalog Title
Dimensions in Inches (millimeters) are subject to change without notice.
A-ꢅꢅ
CONNECTOR CONTACTS
IT - ITS - ITS-RG - ITZ Connectors
Pin Crimp Contacts
ØB
ØC
A
ØD
A
Pin Crimp Contact Part Numbers, Size & Dimensions Table 1/2
ØB ØC
A
ØD
Wire Size
Contact
Size
Part number
mm
Inches
0,9ꢀꢁ
1,1ꢃꢀ
1,04ꢁ
1,04ꢁ
1,04ꢁ
1,04ꢁ
1,04ꢁ
1,04ꢁ
1,2ꢀ0
1,309
1,2ꢀ0
1,2ꢀ0
1,2ꢀ0
1,2ꢀ0
1,2ꢀ0
1,2ꢀ0
1,309
1,2ꢀ0
1,2ꢀ0
1,4ꢂ2
1,4ꢂ2
1,4ꢂ2
1,4ꢂ2
1,4ꢂ2
1,4ꢂ2
1,4ꢂ2
1,4ꢂ2
1,4ꢂ2
mm
1,00
1,40
1,ꢀꢂ
1,ꢀꢂ
1,ꢀꢂ
1,ꢀꢂ
1,ꢀꢂ
1,ꢀꢂ
1,ꢀꢂ
1,ꢀꢂ
1,ꢀꢂ
1,ꢀꢂ
1,ꢀꢂ
1,ꢀꢂ
1,ꢀꢂ
1,ꢀꢁ
1,ꢀꢁ
1,ꢀꢂ
1,ꢀꢂ
2,3ꢂ
2,3ꢂ
2,3ꢂ
2,3ꢂ
2,3ꢂ
2,3ꢂ
2,3ꢂ
2,3ꢂ
2,3ꢂ
Inches
0,039
0,0ꢀꢀ
0,0ꢃ2
0,0ꢃ2
0,0ꢃ2
0,0ꢃ2
0,0ꢃ2
0,0ꢃ2
0,0ꢃ2
0,0ꢃ2
0,0ꢃ2
0,0ꢃ2
0,0ꢃ2
0,0ꢃ2
0,0ꢃ2
0,0ꢃ2
0,0ꢃ2
0,0ꢃ2
0,0ꢃ2
0,094
0,094
0,094
0,094
0,094
0,094
0,094
0,094
0,094
mm
1,30
1,30
1,ꢁ0
1,19
1,30
1,ꢀ0
2,00
2,ꢀ
Inches
0,0ꢀ1
0,0ꢀ1
0,0ꢃꢁ
0,04ꢁ
0,0ꢀ1
0,0ꢀ9
0,0ꢁ9
0,09ꢂ
0,0ꢃꢁ
0,0ꢃꢁ
0,033
0,04ꢁ
0,0ꢀ1
0,0ꢀ9
0,0ꢁ9
0,0ꢂꢁ
0,0ꢂꢁ
0,09ꢂ
0,01ꢂ
0,09ꢂ
0,04ꢁ
0,0ꢀ9
0,0ꢁ0
0,0ꢁ9
0,0ꢂ3
0,11ꢂ
0,130
0,142
mm
1,93
1,93
2,ꢃ0
2,ꢀ9
1,93
2,ꢃ0
2,90
3,ꢂ
Inches
0,0ꢁꢃ
0,0ꢁꢃ
0,102
0,102
0,0ꢁꢃ
0,102
0,114
0,1ꢀ0
0,102
0,102
0,0ꢃ1
0,102
0,0ꢁꢃ
0,102
0,114
0,1ꢀ0
0,1ꢀ0
0,1ꢀ0
0,0ꢁꢁ
0,1ꢀ4
0,102
0,102
0,10ꢂ
0,1ꢀ4
0,1ꢀ4
0,1ꢂ9
0,1ꢃꢀ
0,2ꢃꢂ
mm2
0,1ꢀ-0,ꢃ
0,1ꢀ÷0,ꢃ
1÷1,ꢀ
0.ꢃ
AWG
10-375-20
10-40579
10-40553
10-40553-12
10-40553-13*
10-40553-15*
10-40553-20
10-40553-26
10-40557
20
1ꢂ
24,30
29,ꢃ0
2ꢃ,ꢃ0
2ꢃ,ꢃ0
2ꢃ,ꢃ0
2ꢃ,ꢃ0
2ꢃ,ꢃ0
2ꢃ,ꢃ0
31,ꢁꢀ
33,2ꢀ
31,ꢁꢀ
31,ꢁꢀ
31,ꢁꢀ
31,ꢁꢀ
31,ꢁꢀ
31,ꢁꢀ
33,2ꢀ
31,ꢁꢀ
31,ꢁꢀ
3ꢁ,ꢃꢀ
3ꢁ,ꢃꢀ
3ꢁ,ꢃꢀ
3ꢁ,ꢃꢀ
3ꢁ,ꢃꢀ
3ꢁ,ꢃꢀ
3ꢁ,ꢃꢀ
3ꢁ,ꢃꢀ
3ꢁ,ꢃꢀ
2ꢃ÷20
2ꢃ÷20
1ꢂ÷1ꢃ
20
1ꢃS
1ꢃS
1ꢃS
1ꢃS
1ꢃS
1ꢃS
1ꢃ
1ꢃ
1ꢃ
1ꢃ
1ꢃ
1ꢃ
1ꢃ
1ꢃ
1ꢃ
1ꢃ
1ꢃ
12
12
0,1ꢀ÷0,ꢃ
0,ꢁꢀ-1,0
1-2
2ꢃ÷20
1ꢂ
14
2,ꢀ-3,0
1÷1,ꢀ
1÷1,ꢀ
0,1ꢀ÷0,2
0,ꢃ
12
1,ꢁ0
1,ꢁ0
0,ꢂꢀ
1,20
1,30
1,ꢀ0
2,00
2,2
2,ꢃ0
2,ꢃ0
1,ꢀꢀ
2,ꢃ0
1,93
2,ꢃ0
2,90
3,ꢂ
1ꢂ÷1ꢃ
1ꢂ÷1ꢃ
2ꢃ÷24
20
10-40557L
10-40557-08*
10-40557-12*
10-40557-13*
10-40557-15*
10-40557-20**
10-40557-22**
10-40557-22L**
10-40557-26**
10-40557-32*
10-40561
10-40561-12*
10-40561-15*
10-40561-177*
10-40561-20*
10-40561-22*
10-40561-30**
10-40561-30M**
10-40561-38**
0,1ꢀ÷0,ꢃ
0,ꢁꢀ-1,0
1-2
2ꢃ÷20
1ꢂ
14
2,ꢀ
2,ꢀ
/
/
2,2
2,ꢀ
3,ꢂ
3,ꢂ
2,ꢀ-3,0
/
2,ꢀ-3,0
0,ꢃ
12
32÷2ꢂ
12
0,4ꢀ
2,ꢀ0
1,20
1,ꢀ0
1,ꢁꢁ
2,00
2,10
3,00
3,30
3,ꢃ0
1,9ꢀ
3,90
2,ꢃ0
2,ꢃ0
2,ꢁꢀ
3,90
3,90
4,ꢂ0
4,20
ꢃ,ꢂ
20
12
12
12
12
12
12
12
0,ꢁꢀ-1,0
1,ꢀ
1ꢂ
1ꢂ-1ꢃ
14
2
2,ꢀ
4-ꢀ
/
/
/
4
ꢃ
10
Please consult our sales department for other contacts or crimp tooling details.
PLATING OPTIONS
G10 : Silver (Standard)
G117 : Gold
G112: Heavy Gold
Note
*These contacts accept smaller wire than standard ones. There may be a sealing problem with grommets. The max current rating is limited
by the wire max current rating.
** These contacts accept larger wires than standard ones. The reduced air/creepage distance may worsen the service rating and there may
be difficulties with grommets. The max current rating is limited by the contact max current rating.
Please contact factory for solutions.
© 2016 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Catalog Title
Dimensions in Inches (millimeters) are subject to change without notice.
A-ꢅꢇ
CONNECTOR CONTACTS
IT - ITS - ITS-RG - ITZ Connectors
Pin Crimp Contacts
A
ØB
ØC
ØD
A
Pin Crimp Contact Part Numbers, Size & Dimensions Table 2/2
ØB ØC
A
ØD
Wire Size
Contact
Size
Part number
mm
Inches
1,ꢃꢀ4
1,ꢃꢀ4
1,ꢃꢀ4
1,ꢃꢀ4
1,ꢃꢀ4
1,ꢃꢀ4
1,ꢃꢀ4
1,ꢃꢀ4
1,ꢃꢀ4
1,ꢃꢀ4
1,ꢃꢀ4
mm
3,ꢃ0
3,ꢃ0
3,ꢃ0
3,ꢃ0
3,ꢃ0
3,ꢃ0
3,ꢃ0
3,ꢃ0
9,0ꢀ
ꢀ,ꢁ0
ꢀ,ꢁ0
Inches
0,142
0,142
0,142
0,142
0,142
0,142
0,142
0,142
0,3ꢀꢃ
0,224
0,224
mm
4,ꢀ0
1,ꢀ0
1,ꢂ0
2,00
2,ꢀ
3,00
3,ꢃ0
ꢀ,00
ꢀ,ꢂ0
ꢁ,10
2,20
Inches
0,1ꢁꢁ
0,0ꢀ9
0,0ꢁ1
0,0ꢁ9
0,09ꢂ
0,11ꢂ
0,142
0,19ꢁ
0,22ꢂ
0,2ꢂ0
0,0ꢂꢁ
mm
ꢃ,90
3,40
3,ꢂ0
3,ꢂ0
3,ꢂ
4,ꢂ0
ꢃ,ꢂ0
ꢃ,90
ꢁ,ꢂ0
9,ꢀ3
3,ꢂ0
Inches
0,2ꢁ2
0,134
0,1ꢀ0
0,1ꢀ0
0,1ꢀ0
0,1ꢂ9
0,2ꢃꢂ
0,2ꢁ2
0,30ꢁ
0,3ꢁꢀ
0,1ꢀ0
mm2
AWG
ꢂ
1ꢂ
1ꢂ÷14
14
12 -14
/
10
/
10-40792
10-40792-15*
10-40792-18*
10-40792-20*
10-40792-26*
10-40792-30*
10-40792-38*
10-40792-50**
ꢂ
ꢂ
ꢂ
ꢂ
ꢂ
ꢂ
ꢂ
ꢂ
ꢂ
4
4
42,00
42,00
42,00
42,00
42,00
42,00
42,00
42,00
42,00
42,00
42,00
9
0,ꢁꢀ-1,0
1÷2
2
3
4-ꢀ
ꢃ
10
10-40792-58**
10-113474-4P
13,2
22-2ꢀ
2,ꢀ
ꢃ
4
/
10-113474-4P-22*
10-113474-4P-25
10-113474-4P-26*
10-113474-4P-30*
10-113474-4P-38*
10-113474-4P-50*
10-113474-4P-58*
10-113474-4P-62*
10-113474-1P
10-113474-1P-107*
10-113474-1P-78*
10-113474-1P-35*
10-113474-1P-45*
10-113474-1P-50*
10-113474-1P-58*
10-113474-1P-62*
10-113474-0P*
Replaced by 10-1134ꢁ4-4P
4
4
4
4
4
4
0
0
0
0
0
0
0
42,00
42,00
42,00
42,00
42,00
42,00
4ꢀ,00
4ꢀ,00
4ꢀ,00
4ꢀ,00
4ꢀ,00
4ꢀ,00
4ꢀ,00
4ꢀ,00
ꢃ3,00
ꢃ3,00
ꢃ3,00
ꢃ3,00
1,ꢃꢀ4
1,ꢃꢀ4
1,ꢃꢀ4
1,ꢃꢀ4
1,ꢃꢀ4
1,ꢃꢀ4
1,ꢁꢁ2
1,ꢁꢁ2
1,ꢁꢁ2
1,ꢁꢁ2
1,ꢁꢁ2
1,ꢁꢁ2
1,ꢁꢁ2
1,ꢁꢁ2
2,4ꢂ0
2,4ꢂ0
2,4ꢂ0
2,4ꢂ0
ꢀ,ꢁ0
ꢀ,ꢁ0
ꢀ,ꢁ0
ꢀ,ꢁ0
9,0ꢀ
ꢀ,ꢁ0
9,0ꢀ
9,0ꢀ
9,0ꢀ
9,0ꢀ
9,0ꢀ
9,0ꢀ
9,0ꢀ
9,0ꢀ
12,ꢃ9
12,ꢃ9
12,ꢃ9
12,ꢃ9
0,224
0,224
0,224
0,224
0,3ꢀꢃ
0,224
0,3ꢀꢃ
0,3ꢀꢃ
0,3ꢀꢃ
0,3ꢀꢃ
0,3ꢀꢃ
0,3ꢀꢃ
0,3ꢀꢃ
0,3ꢀꢃ
0,ꢀ00
0,ꢀ00
0,ꢀ00
0,ꢀ00
2,ꢀ0
3,00
3,ꢃ0
ꢀ,00
ꢀ,ꢂ0
ꢃ,20
11,ꢀ0
10,ꢁ0
ꢁ,1ꢀ
9,00
4,ꢀꢀ
ꢀ,00
ꢀ,ꢂ0
ꢃ,20
1ꢃ,ꢀ
ꢁ,10
10,ꢁ
14,ꢀ
0,09ꢂ
0,11ꢂ
0,142
0,19ꢁ
0,22ꢂ
0,244
0,4ꢀ3
0,421
0,2ꢂ1
0,3ꢀ4
0,1ꢁ9
0,19ꢁ
0,22ꢂ
0,244
0,ꢃꢀ0
0,2ꢂ0
0,421
0,ꢀꢁ1
3,ꢂ0
4,ꢂ0
ꢃ,ꢂ0
ꢁ,00
ꢁ,ꢂ0
9,ꢀ3
14,30
14,3ꢀ
9,ꢀ0
14,3ꢀ
ꢃ,ꢂ0
ꢁ,00
ꢁ,ꢂ0
9,ꢀ0
20
0,1ꢀ0
0,1ꢂ9
0,2ꢃꢂ
0,2ꢁꢃ
0,30ꢁ
0,3ꢁꢀ
0,ꢀꢃ3
0,ꢀꢃꢀ
0,3ꢁ4
0,ꢀꢃꢀ
0,2ꢃꢂ
0,2ꢁꢃ
0,30ꢁ
0,3ꢁ4
0,ꢁꢂꢁ
0,3ꢁꢀ
0,ꢀꢃꢀ
0,ꢁꢂꢁ
3
4-ꢀ
ꢃ
10
13,2
1ꢃ
ꢀ0-ꢃ0
ꢀ0
22-2ꢀ
3ꢀ
9
10
13,2
1ꢃ
10ꢁ
22-2ꢀ
ꢀ0
/
/
10
/
ꢃ
/
0
/
4
/
ꢂ
/
ꢃ
/
4/0
4
/
0
4/0
4/0
4/0
4/0
10-113474-0P-78*
10-113474-0P-107*
10-113474-0P-144*
9,ꢀ3
14,3ꢀ
20
ꢁ0
/
Please consult our sales department for other contacts or crimp tooling details.
PLATING OPTIONS
G10 : Silver (Standard)
G117 : Gold
G112: Heavy Gold
Note
*These contacts accept smaller wire than standard ones. There may be a sealing problem with grommets. The max current rating is limited
by the wire max current rating.
** These contacts accept larger wires than standard ones. The reduced air/creepage distance may worsen the service rating and there may
be difficulties with grommets. The max current rating is limited by the contact max current rating.
Please contact factory for solutions.
© 2016 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Catalog Title
Dimensions in Inches (millimeters) are subject to change without notice.
A-ꢅꢈ
CONNECTOR CONTACTS
IT - ITS - ITS-RG - ITZ Connectors
Socket Crimp Contacts
A
ØC
ØD
A
Socket Crimp Contact Part Numbers, Size & Dimensions Table 1/2
ØB ØC
A
ØD
Wire Size
Contact
Size
Part number
mm
3ꢃ,ꢀ
34,4
2ꢃ,ꢃ
2ꢃ,ꢃ
2ꢃ,ꢃ
2ꢃ,ꢃ
2ꢃ,ꢃ
2ꢃ,ꢃ
2ꢃ,ꢃ
3ꢃ,ꢀ
3ꢃ,ꢀ
3ꢃ,ꢀ
3ꢃ,ꢀ
3ꢃ,ꢀ
3ꢃ,ꢀ
3ꢃ,ꢀ
Inches
1,43ꢁ
1,3ꢀ4
1,04ꢁ
1,04ꢁ
1,04ꢁ
1,04ꢁ
1,04ꢁ
1,04ꢁ
1,04ꢁ
1,43ꢁ
1,43ꢁ
1,43ꢁ
1,43ꢁ
1,43ꢁ
1,43ꢁ
1,43ꢁ
1,43ꢁ
1,43ꢁ
1,43ꢁ
1,4ꢂ2
1,4ꢂ2
1,4ꢂ2
1,4ꢂ2
1,4ꢂ2
1,4ꢂ2
1,4ꢂ2
1,4ꢂ2
1,4ꢂ2
1,4ꢂ2
mm
1,0ꢂ
1,4ꢃ
1,ꢃꢀ
1,ꢃꢀ
1,ꢃꢀ
1,ꢃꢀ
1,ꢃꢀ
1,ꢃꢀ
1,ꢃꢀ
1,ꢃꢀ
1,ꢃꢀ
1,ꢃꢀ
1,ꢃꢀ
1,ꢃꢀ
1,ꢃꢀ
1,ꢃꢀ
1,ꢃꢀ
1,ꢃꢀ
1,ꢃꢀ
2,4ꢂ
2,4ꢂ
2,4ꢂ
2,4ꢂ
2,4ꢂ
2,4ꢂ
2,4ꢂ
2,3ꢂ
2,3ꢂ
2,3ꢂ
Inches
0,043
0,0ꢀꢁ
0,0ꢃꢀ
0,0ꢃꢀ
0,0ꢃꢀ
0,0ꢃꢀ
0,0ꢃꢀ
0,0ꢃꢀ
0,0ꢃꢀ
0,0ꢃꢀ
0,0ꢃꢀ
0,0ꢃꢀ
0,0ꢃꢀ
0,0ꢃꢀ
0,0ꢃꢀ
0,0ꢃꢀ
0,0ꢃꢀ
0,0ꢃꢀ
0,0ꢃꢀ
0,09ꢂ
0,09ꢂ
0,09ꢂ
0,09ꢂ
0,09ꢂ
0,09ꢂ
0,09ꢂ
0,094
0,094
0,094
mm
1,3
1,3
1,ꢁ
1,ꢁ
1,2
1,3
1,ꢀ
2,0
2,ꢀ
1,ꢁ
1,ꢁ
0,ꢂꢀ
1,2
1,3
1,4ꢀ
2,0
2,2
2,ꢀ
Inches
0,0ꢀ1
0,0ꢀ1
0,0ꢃꢁ
0,0ꢃꢁ
0,04ꢁ
0,0ꢀ1
0,0ꢀ9
0,0ꢁ9
0,09ꢂ
0,0ꢃꢁ
0,0ꢃꢁ
0,033
0,04ꢁ
0,0ꢀ1
0,0ꢀꢁ
0,0ꢁ9
0,0ꢂꢁ
0,09ꢂ
0,01ꢂ
0,09ꢂ
0,09ꢂ
0,04ꢁ
0,0ꢀꢁ
0,0ꢁ0
0,0ꢁ9
0,0ꢂ3
0,11ꢂ
0,130
0,142
mm
1,93
1,93
2,ꢃ0
2,ꢃ0
2,ꢃ0
1,93
2,ꢃ0
2,90
3,ꢂ0
2,ꢃ0
2,ꢃ0
1,ꢀꢀ
2,ꢃ0
1,93
2,ꢃ0
2,90
3,ꢂ
3,ꢂ0
1,9ꢀ
3,9
3,9
2,ꢃ
2,ꢃ0
2,ꢁꢀ
3,ꢂ
Inches
0,0ꢁꢃ
0,0ꢁꢃ
0,102
0,102
0,102
0,0ꢁꢃ
0,102
0,114
0,1ꢀ0
0,102
0,102
0,0ꢃ1
0,102
0,0ꢁꢃ
0,102
0,114
0,1ꢀ0
0,1ꢀ0
0,0ꢁꢁ
0,1ꢀ4
0,1ꢀ4
0,102
0,102
0,10ꢂ
0,1ꢀ0
0,1ꢀ0
0,1ꢂ9
0,1ꢃꢀ
0,1ꢂ9
mm2
0,1ꢀ-0,ꢃ
0,1ꢀ-0,ꢃ
1-1,ꢀ
1-1,ꢀ
0,ꢃ
0,1ꢀ-0,ꢃ
0,ꢁꢀ-1
1-2
2,ꢀ-3,0
1-1,ꢀ
1-1,ꢀ
0,1ꢀ-0,2
0,ꢃ
0,1ꢀ-0,ꢃ
0,ꢁꢀ-1
1-2
2,ꢀ
2,ꢀ-3,0
/
2,ꢀ-3,0
2,ꢀ-3,0
0,ꢃ
0,ꢁꢀ-1
1,ꢀ
AWG
2ꢃ-20
2ꢃ-20
1ꢂ-1ꢃ
1ꢂ-1ꢃ
20
2ꢃ-20
1ꢂ
14
10-40520LC
10-40588
10-40552
20
1ꢂ
1ꢃS
1ꢃS
1ꢃS
1ꢃS
1ꢃS
1ꢃS
1ꢃS
1ꢃ
1ꢃ
1ꢃ
1ꢃ
1ꢃ
1ꢃ
1ꢃ
1ꢃ
1ꢃ
1ꢃ
12
12
12
10-40552 TU
10-40552-12*
10-40552-13*
10-40552-15*
10-40552-20**
10-40552-26**
10-40556
10-40556 TU
10-40556-08*
10-40556-12*
10-40556-13*
10-40556-15*
10-40556-20**
10-40556-22**
10-40556-26**
10-40556-32*
10-40560
10-40560 TU
10-40560-12*
10-40560-15*
10-40560-177*
10-40560-20*
10-40560-22*
10-40560-30**
10-40560-30M**
10-40560-38**
12
1ꢂ-1ꢃ
1ꢂ-1ꢃ
2ꢃ-24
20
2ꢃ-20
1ꢂ
14
/
12
32-2ꢂ
12
12
20
1ꢂ
1ꢂ-1ꢃ
14
/
/
/
10
3ꢃ,ꢀ
3ꢃ,ꢀ
3ꢃ,ꢀ
0,4ꢀ
2,ꢀ
2,ꢀ
3ꢁ,ꢃꢀ
3ꢁ,ꢃꢀ
3ꢁ,ꢃꢀ
3ꢁ,ꢃꢀ
3ꢁ,ꢃꢀ
3ꢁ,ꢃꢀ
3ꢁ,ꢃꢀ
3ꢁ,ꢃꢀ
3ꢁ,ꢃꢀ
3ꢁ,ꢃꢀ
1,2
12
12
12
12
12
12
12
1,4ꢀ
1,ꢁꢁ
2,0
2
2,ꢀ
4-ꢀ
4
2,1
3,ꢂ
3,00
3,30
3,ꢃ0
4,ꢂ0
4,20
4,ꢂ0
ꢃ
Please consult our sales department for other contacts or crimp tooling details.
PLATING OPTIONS
G10 : Silver (Standard)
G117 : Gold
G112: Heavy Gold
Note
*These contacts accept smaller wire than standard ones. There may be a sealing problem with grommets. The max current rating is limited
by the wire max current rating.
** These contacts accept larger wires than standard ones. The reduced air/creepage distance may worsen the service rating and there may
be difficulties with grommets. The max current rating is limited by the contact max current rating.
Please contact factory for solutions.
© 2016 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Catalog Title
Dimensions in Inches (millimeters) are subject to change without notice.
A-ꢅꢉ
CONNECTOR CONTACTS
IT - ITS - ITS-RG - ITZ Connectors
Socket Crimp Contacts
ØB
A
ØC
ØD
A
Socket Crimp Contact Part Numbers, Size & Dimensions Table 2/2
ØB ØC
A
ØD
Wire Size
Contact
Size
Part number
mm
40,ꢀ
40,ꢀ
40,ꢀ
40,ꢀ
40,ꢀ
40,ꢀ
40,ꢀ
40,ꢀ
40,ꢀ
41,0
41,0
Inches
1,ꢀ94
1,ꢀ94
1,ꢀ94
1,ꢀ94
1,ꢀ94
1,ꢀ94
1,ꢀ94
1,ꢀ94
1,ꢀ94
1,ꢃ14
1,ꢃ14
mm
3,ꢁ0
3,ꢁ0
3,ꢁ0
3,ꢃ0
3,ꢁ0
3,ꢁ0
3,ꢁ0
3,ꢁ0
3,ꢁ0
ꢀ,ꢂ0
ꢀ,ꢂ0
Inches
0,14ꢃ
0,14ꢃ
0,14ꢃ
0,142
0,14ꢃ
0,14ꢃ
0,14ꢃ
0,14ꢃ
0,14ꢃ
0,22ꢂ
0,22ꢂ
mm
4,ꢀ
1,4ꢀ
1,ꢂ
2,00
2,ꢀ
3,0
3,ꢃ
ꢀ,0
ꢀ,ꢂ
ꢁ,1
Inches
0,1ꢁꢁ
0,0ꢀꢁ
0,0ꢁ1
0,0ꢁ9
0,09ꢂ
0,11ꢂ
0,142
0,19ꢁ
0,22ꢂ
0,2ꢂ0
0,0ꢂꢁ
mm
ꢃ,ꢁꢀ
3,4
3,ꢂ
3,ꢂ0
3,ꢂ
4,ꢂ
ꢃ,ꢂ
ꢃ,9
ꢁ,ꢂ
Inches
0,2ꢃꢃ
0,134
0,1ꢀ0
0,1ꢀ0
0,1ꢀ0
0,1ꢂ9
0,2ꢃꢂ
0,2ꢁ2
0,30ꢁ
0,3ꢁꢀ
0,1ꢀ0
mm2
AWG
10-40793-1
10-40793-1-15*
10-40793-1-18*
10-40793-1-20*
10-40793-1-26*
10-40793-1-30*
10-40793-1-38*
10-40793-1-50**
10-10793-1-58**
10-113474-4S-1
10-113474-4S-1-22*
10-113474-4S-1-25
10-113474-4S-1-26*
10-113474-4S-1-30*
10-113474-4S-1-38*
10-113474-4S-1-50*
10-113474-4S-1-58*
10-113474-4S-62*
10-113474-1S
10-113474-1S-107*
10-113474-1S-78*
10-113474-1S-35*
10-113474-1S-45*
10-113474-1S-50*
10-113474-1S-58*
10-113474-1S-62*
10-113474-0S
ꢂ
ꢂ
ꢂ
ꢂ
ꢂ
ꢂ
ꢂ
ꢂ
ꢂ
4
4
9
0,ꢁꢀ-1
1-2
2
ꢂ
1ꢂ
1ꢂ-14
14
12
/
3
4-ꢀ
ꢃ
10
10
/
13,2
22-2ꢀ
2,ꢀ
ꢃ
4
/
9,ꢀ3
3,ꢂ
2,2
Replaced by 10-1134ꢁ4-4S-1
4
4
4
4
4
4
0
0
0
0
0
0
0
41,0
41,0
41,0
41,0
41,0
41,0
44,ꢃ
44,ꢃ
44,ꢃ
44,ꢃ
44,ꢃ
44,ꢃ
44,ꢃ
4ꢀ,3
ꢃꢀ,9
ꢃꢀ,9
ꢃꢀ,9
ꢃꢀ,9
1,ꢃ14
1,ꢃ14
1,ꢃ14
1,ꢃ14
1,ꢃ14
1,ꢃ14
1,ꢁꢀꢃ
1,ꢁꢀꢃ
1,ꢁꢀꢃ
1,ꢁꢀꢃ
1,ꢁꢀꢃ
1,ꢁꢀꢃ
1,ꢁꢀꢃ
1,ꢁꢂ3
2,ꢀ94
2,ꢀ94
2,ꢀ94
2,ꢀ94
ꢀ,ꢂ0
ꢀ,ꢂ0
ꢀ,ꢂ0
ꢀ,ꢂ0
ꢀ,ꢂ0
ꢀ,ꢂ0
9,1ꢁ
9,1ꢁ
9,1ꢁ
9,1ꢁ
9,1ꢁ
9,1ꢁ
9,1ꢁ
9,1ꢁ
12,ꢁ
12,ꢁ
12,ꢁ
12,ꢁ
0,22ꢂ
0,22ꢂ
0,22ꢂ
0,22ꢂ
0,22ꢂ
0,22ꢂ
0,3ꢃ1
0,3ꢃ1
0,3ꢃ1
0,3ꢃ1
0,3ꢃ1
0,3ꢃ1
0,3ꢃ1
0,3ꢃ1
0,ꢀ00
0,ꢀ00
0,ꢀ00
0,ꢀ00
2,ꢀ
3,0
3,ꢃ
ꢀ,0
ꢀ,ꢂ
0,09ꢂ
0,11ꢂ
0,142
0,19ꢁ
0,22ꢂ
0,244
0,4ꢀ3
0,421
0,2ꢂ1
0,3ꢀ4
0,1ꢁ9
0,19ꢁ
0,22ꢂ
0,244
0,ꢃꢀ0
0,2ꢂ1
0,421
0,ꢀꢁ1
3,ꢂ
4,ꢂ
ꢃ,ꢂ
ꢁ,0
ꢁ,ꢂ
0,1ꢀ0
0,1ꢂ9
0,2ꢃꢂ
0,2ꢁꢃ
0,30ꢁ
0,3ꢁ4
0,ꢀꢃ3
0,ꢀꢃꢀ
0,3ꢁ4
0,ꢀꢃꢀ
0,2ꢃꢂ
0,2ꢁꢃ
0,30ꢁ
0,3ꢁ4
0,ꢁꢂꢁ
0,3ꢁ4
0,ꢀꢃꢀ
0,ꢁꢂꢁ
3
4-ꢀ
ꢃ
/
/
10
/
10
13,2
1ꢃ
ꢀ0-ꢃ0
ꢀ0
22-2ꢀ
3ꢀ
ꢃ
/
0
/
4
/
ꢂ
/
ꢃ,2
9,ꢀ
11,ꢀ
10,ꢁ
ꢁ,1ꢀ
9,0
4,ꢀꢀ
ꢀ,0
ꢀ,ꢂ
ꢃ,2
1ꢃ,ꢀ
ꢁ,1ꢀ
10,ꢁ
14,ꢀ
14,3
14,3ꢀ
9,ꢀ
14,3ꢀ
ꢃ,ꢂ
ꢁ,0
ꢁ,ꢂ
9,ꢀ
20
9
10
13,2
1ꢃ
ꢃ
/
0
4/0
4/0
4/0
4/0
10ꢁ
22-2ꢀ
ꢀ0
4/0
4
/
10-113474-0S-78*
10-113474-0S-107*
10-113474-0S-144*
9,ꢀ
14,3ꢀ
20
ꢁ0
/
Please consult our sales department for other contacts or crimp tooling details.
PLATING OPTIONS
G10 : Silver (Standard)
G117 : Gold
G112: Heavy Gold
Note
*These contacts accept smaller wire than standard ones. There may be a sealing problem with grommets. The max current rating is limited
by the wire max current rating.
** These contacts accept larger wires than standard ones. The reduced air/creepage distance may worsen the service rating and there may
be difficulties with grommets. The max current rating is limited by the contact max current rating.
Please contact factory for solutions.
© 2016 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Catalog Title
Dimensions in Inches (millimeters) are subject to change without notice.
A-ꢅ5
CONNECTOR CONTACTS
IT - ITS - ITS-RG - ITZ Connectors
Size 8 Coaxial Pin and Socket Contacts
COAXIAL PIN CONTACT
A
3ꢂ,ꢀ max
Ø ꢁ,ꢂ
COAXIAL SOCKET CONTACT
Ø ꢁ,ꢂ
42 max
Coaxial Pin and Socket Contact Part Number, Cable information and Dimensions
Pin P/N
CC ꢁ003ꢂ
CC ꢁ004ꢃ
CC ꢁ00ꢀ4
CC ꢁ00ꢀꢃ
CC ꢁ00ꢃ0
CC ꢁ00ꢃ4
Socket P/N
CC ꢁ0040
CC ꢁ0042
CC ꢁ00ꢀ2
CC ꢁ00ꢀꢂ
CC ꢁ00ꢃ2
CC ꢁ00ꢃꢃ
Used with Cable
RG ꢀꢂ
RG ꢀ9
RG 1ꢁ9
RG 1ꢁ4 / RG 31ꢃ
RG 142
Ø A
1.0ꢀ
0.ꢁꢀ
0.ꢀꢀ
0.ꢁꢀ
1.0ꢀ
1.0ꢀ
Ø B
3.1ꢀ
3,90
1,ꢁ0
1,ꢁ0
3.1ꢀ
3.1ꢀ
Ø C
ꢀ.23
ꢀ,ꢃ0
3,10
3,10
ꢀ,ꢃ0
ꢀ,90
RG 223
COAXIAL INSERTION AND EXTRACTION TOOL - SIZE 8
M.118260/C
Insertion and Extraction Tool for COAX Contacts Size ꢂ
© 2016 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Catalog Title
Dimensions in Inches (millimeters) are subject to change without notice.
A-ꢅ6
CONNECTOR CONTACTS
IT - ITS - ITS-RG - ITZ Connectors
Coaxial Contacts Assembly
COAXIAL CONTACTS ASSEMBLY
A
Ferrule Locking
Nut
Tube
Spacer
Rear
insert
Central
contact
Front
insert
Contact
1 – Strip the cable according to the following dimensions
Jacket
Braid
Insulator
Conductor
COAX CABLE
Step 2
ꢃ
20
3.ꢂ
2 – Solder the central contact with the conductor of the
coax cable after having pre-tinned the hole
of the contact and the conductor, too
Step 3
Step 4
Step 5
Step 6
Step 7
3 – Place the ferrule on the braid
4 – Place the locking nut on the tube and then this one
on the insulator, then insert the tube under the braid
Crimp
ꢀ – Crimp the ferrule on the braid using the follow tools:
Crimping tool:
M22ꢀ20 / ꢀ-01
Die assy for RGꢀꢂ:
Die assy for RGꢀ9:
Die assy for RG142:
Die assy for RG1ꢁ4:
Die assy for RG1ꢁ9:
Die assy for RG223:
M22ꢀ20 / ꢀ-0ꢀ A
M22ꢀ20 / ꢀ-4ꢀ B
M22ꢀ20 / ꢀ-4ꢀ B
M22ꢀ20 / ꢀ-0ꢂ A
M22ꢀ20 / ꢀ-0ꢂ A
M22ꢀ20 / ꢀ-4ꢀ A
Note: the nut has to remain free to rotate
ꢃ – Withdraw the spacer on the insulator till
it stops against the tube
Step 8
ꢁ – Place the rear insert on the central contact by
the cut on the side
41.5
20°~
Assembled contact
ꢂ – Place the front insert on the central contact and insert
everything inside the contact lightly pressing the
rear insert; then screw the nut and the contact together.
© 2016 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Catalog Title
Dimensions in Inches (millimeters) are subject to change without notice.
A-ꢅ7
CONNECTOR CONTACTS
IT - ITS - ITS-RG - ITZ Connectors
Louver Band Socket Contacts
These contacts series are precision-machined using high conductivity copper alloy.
A stamped and formed spring (“louverband”) is installed into the socket contact.
The spring is made from ꢃ mil beryllium copper (BeCu). Testing has demonstrated that
this contact system outperforms conventional aerospace-grade contact systems. The
louverband spring provides many points of electrical contact with the mating pin, as op-
posed to a few “high spots” on a conventional four-finger contact as shown in Fig. 2. The
louverband design offers lower voltage drop for reduced temperature rise and higher
current carrying capacity. In addition to its electrical advantages, the louverband also is
mechanically superior to four-finger contacts. The louverband spring has consistent, sta-
ble normal force, even when subjected to thousands of mating cycles and temperature
extremes.
A
Figure 1. LouverBand
Socket Contact
1
Figure 2. Conventional Contact on the
left, LouverBand Contact on the right
Size
Wire Size
Part Number
ꢂ3N-2ꢀ01ꢃ-0G10-L
ꢂ3N-2ꢀ01ꢃ-4G10-L
ꢂ3N-2ꢀ01ꢃ-ꢂG10-L
0
4
ꢂ
#0
#4
#ꢂ
Max Average
Engagement Force
(ounces)
Max Diameter
SAE-AS31971 pin
Current Rating
Min Separation Force
(ounces)
Contact
Resistance
(mΩ Max.)
Contact
Size
Rated current at Rated current at
min Diameter
+20°C
(Ampere)
+80°C
(Ampere)
SAE-AS31971 pin
0
4
ꢂ
300
1ꢃ0
90
2ꢀ0
130
ꢁ0
0.2
0.ꢀ
1
1ꢀ
10
ꢀ
320
240
1ꢃ0
© 2016 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Catalog Title
Dimensions in Inches (millimeters) are subject to change without notice.
A-ꢅ8
CONNECTOR CONTACTS
IT - ITS - ITS-RG - ITZ Connectors
Reducers
For crimp contacts are available special reducers in order to accomodate a smaller wire size in a contact. The
reducer is fully inserted into the wire barrell, then the crimping of the wire can be performed.
A
Contact
Size
Part Number
From wire size
To wire size
10-ꢂꢃ9-20A-2ꢃAG11ꢁ
10-ꢂꢃ9-1ꢃA-22AG10
10-ꢂꢃ9-1ꢃA-20AG10
10-ꢂꢃ9-12A-2ꢃAG10
10-ꢂꢃ9-12A-20AG10
10-ꢂꢃ9-12A-1ꢃAG10
10-ꢂꢃ9-ꢂA-1ꢂAG10
10-ꢂꢃ9-ꢂA-1ꢃAG10
10-ꢂꢃ9-ꢂA-14AG10
10-ꢂꢃ9-ꢂA-12AG10
10-ꢂꢃ9-ꢂA-10AG10
10-ꢂꢃ9-ꢂA-2.ꢀMG10
10-ꢂꢃ9-ꢂA-ꢃMG10
10-ꢂꢃ9-4A-ꢂAG10
10-ꢂꢃ9-4A-ꢃAG10
10-ꢂꢃ9-4A-1ꢃMG10
10-ꢂꢃ9-4A-10MG10
10-ꢂꢃ9-4A-ꢃMG10
10-ꢂꢃ9-4A-2.ꢀMG10
10-ꢂꢃ9-0A-ꢃAG10
10-ꢂꢃ9-0A-2AG10
10-ꢂꢃ9-0A-ꢀ0MG10
10-ꢂꢃ9-0A-3ꢀMG10
10-ꢂꢃ9-0A-2ꢀMG10
10-ꢂꢃ9-0A-1ꢃMG10
10-ꢂꢃ9-0A-10MG10
10-ꢂꢃ9-4/0A-ꢁ0MG10
20
1ꢃ
1ꢃ
12
12
12
ꢂ
AWG 20
AWG 1ꢃ
AWG 1ꢃ
AWG 12
AWG 12
AWG 12
AWG ꢂ
AWG ꢂ
AWG ꢂ
AWG ꢂ
AWG ꢂ
AWG ꢂ
AWG ꢂ
AWG 4
AWG 4
AWG 4
AWG 4
AWG 4
AWG 4
AWG 0
AWG 0
AWG 0
AWG 0
AWG 0
AWG 0
AWG 0
AWG 4/0
AWG 2ꢃ
AWG 22
AWG 20
AWG 2ꢃ
AWG 20
AWG 1ꢃ
AWG 1ꢂ
AWG 1ꢃ
AWG 14
AWG 12
AWG 10
2,ꢀ mm2
ꢃ mm2
AWG ꢂ
AWG4 to AWG8 reducer
ꢂ
ꢂ
ꢂ
ꢂ
ꢂ
ꢂ
4
4
AWG ꢃ
4
1ꢃ mm2
10 mm2
ꢃ mm2
2,ꢀ mm2
AWG ꢃ
4
Size 4 contact
with AWG4 wire barrell
4
4
0
0
AWG 2
0
ꢀ0 mm2
3ꢀ mm2
2ꢀ mm2
1ꢃ mm2
10 mm2
ꢁ0 mm2
0
0
0
0
4/0
Size 4 contact
with AWG8 reducer
Please consult our Sales Department for other options.
© 2016 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Catalog Title
Dimensions in Inches (millimeters) are subject to change without notice.
A-ꢅꢄ
CONNECTOR CONTACTS
IT - ITS - ITS-RG - ITZ Connectors
Pin Crimp Contacts - Insertion and Removal Tools
Insertion and Removal Tools Table
Wire Size
Insertion Tool
Removal Tool
Part Number
Contact Size
2
mm
AWG
2ꢃ÷20
2ꢃ÷20
1ꢂ÷1ꢃ
20
Glenair P/N
M.11ꢁ34ꢃ
M.11ꢁ34ꢃ
M.11ꢁ0ꢂ3
M.11ꢁ0ꢂ3
M.11ꢁ34ꢃ
M.11ꢁ0ꢂ3
M.11ꢁ0ꢂ3
M.11ꢁ0ꢂ2
M.11ꢁ0ꢂ3
M.11ꢁ0ꢂ3
M.11ꢁ34ꢃ
M.11ꢁ0ꢂ3
M.11ꢁ34ꢃ
M.11ꢁ0ꢂ3
M.11ꢁ0ꢂ3
M.11ꢁ0ꢂ3
M.11ꢁ0ꢂ3
M.11ꢁ0ꢂ3
M.11ꢁ0ꢂ3
M.11ꢁ0ꢂ2
M.11ꢁ0ꢂ3
M.11ꢁ0ꢂ3
M.11ꢁ0ꢂ2
M.11ꢁ0ꢂ2
M.11ꢁ0ꢂ2
M.11ꢁ0ꢂ2
M.11ꢁ0ꢂ2
M.11ꢁ0ꢂ2
Glenair P/N
M.11ꢂ2ꢀ1
M.11ꢂ249
M.11ꢂ2ꢀ0
M.11ꢂ2ꢀ0
M.11ꢂ2ꢀ0
M.11ꢂ2ꢀ0
M.11ꢂ2ꢀ0
M.11ꢂ2ꢀ0
M.11ꢂ2ꢀ0
M.11ꢂ2ꢀ0
M.11ꢂ2ꢀ0
M.11ꢂ2ꢀ0
M.11ꢂ2ꢀ0
M.11ꢂ2ꢀ0
M.11ꢂ2ꢀ0
M.11ꢂ2ꢀ0
M.11ꢂ2ꢀ0
M.11ꢂ2ꢀ0
M.11ꢂ2ꢀ0
M.11ꢂ2ꢀ0
M.11ꢂ2ꢀ0
M.11ꢂ2ꢀ0
M.11ꢂ2ꢀ0
M.11ꢂ2ꢀ0
M.11ꢂ2ꢀ0
M.11ꢂ2ꢀ0
M.11ꢂ2ꢀ0
M.11ꢂ2ꢀ0
A
10-3ꢁꢀ-20
10-40ꢀꢁ9
20
1ꢂ
0,1ꢀ-0,ꢃ
0,1ꢀ÷0,ꢃ
1÷1,ꢀ
0.ꢃ
10-40ꢀꢀ3
1ꢃS
1ꢃS
1ꢃS
1ꢃS
1ꢃS
1ꢃS
1ꢃ
10-40ꢀꢀ3-12
10-40ꢀꢀ3-13
10-40ꢀꢀ3-1ꢀ
10-40ꢀꢀ3-20
10-40ꢀꢀ3-2ꢃ
10-40ꢀꢀꢁ
0,1ꢀ÷0,ꢃ
0,ꢁꢀ-1,0
1-2
2ꢃ÷20
1ꢂ
14
2,ꢀ-3,0
1÷1,ꢀ
1÷1,ꢀ
0,1ꢀ÷0,2
0,ꢃ
12
1ꢂ÷1ꢃ
1ꢂ÷1ꢃ
2ꢃ÷24
20
10-40ꢀꢀꢁL
1ꢃ
10-40ꢀꢀꢁ-0ꢂ
10-40ꢀꢀꢁ-12
10-40ꢀꢀꢁ-13
10-40ꢀꢀꢁ-1ꢀ
10-40ꢀꢀꢁ-20
10-40ꢀꢀꢁ-22
10-40ꢀꢀꢁ-22L
10-40ꢀꢀꢁ-2ꢃ
10-40ꢀꢀꢁ-32
10-40ꢀꢃ1
1ꢃ
1ꢃ
1ꢃ
0,1ꢀ÷0,ꢃ
0,ꢁꢀ-1,0
1-2
2ꢃ÷20
1ꢂ
1ꢃ
1ꢃ
14
1ꢃ
2,ꢀ
/
1ꢃ
2,ꢀ
/
1ꢃ
2,ꢀ-3,0
/
12
1ꢃ
32÷2ꢂ
12
12
2,ꢀ-3,0
0,ꢃ
10-40ꢀꢃ1-12
10-40ꢀꢃ1-1ꢀ
10-40ꢀꢃ1-1ꢁꢁ
10-40ꢀꢃ1-20
10-40ꢀꢃ1-22
10-40ꢀꢃ1-30
10-40ꢀꢃ1-30M
10-40ꢀꢃ1-3ꢂ
12
20
12
0,ꢁꢀ-1,0
1,ꢀ
1ꢂ
12
1ꢂ-1ꢃ
14
12
2
12
2,ꢀ
/
12
4-ꢀ
/
12
12
4
/
ꢃ
10
Please consult our sales department for other contact options or crimp tooling details.
Insertion and Removal Tools
Insertion Tool
Removal Tool
© 2016 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Catalog Title
Dimensions in Inches (millimeters) are subject to change without notice.
A-ꢇꢆ
CONNECTOR CONTACTS
IT - ITS - ITS-RG - ITZ Connectors
Pin Crimp Contacts - Insertion and Removal Tools
Insertion and Removal Tools Table
Wire Size
Insertion Tool
Removal Tool
Part Number
Contact Size
2
mm
9
AWG
Glenair P/N
M.11ꢁ344
M.11ꢁ0ꢂ2
M.11ꢁ0ꢂ2
M.11ꢁ0ꢂ2
M.11ꢁ0ꢂ2
M.11ꢁ0ꢂ2
M.11ꢁ344
M.11ꢁ344
M.11ꢁ344
M.11ꢁ34ꢁ
M.11ꢁ0ꢂ2
M.11ꢁ0ꢂ2
M.11ꢁ0ꢂ2
M.11ꢁ344
M.11ꢁ344
M.11ꢁ344
M.11ꢁ34ꢁ
M.11ꢁ34ꢂ
M.11ꢁ34ꢂ
M.11ꢁ34ꢁ
M.11ꢁ34ꢂ
M.11ꢁ344
M.11ꢁ344
M.11ꢁ344
M.11ꢁ34ꢁ
/
Glenair P/N
M.11ꢂ2ꢃ0
M.11ꢂ2ꢃ0
M.11ꢂ2ꢃ0
M.11ꢂ2ꢃ0
M.11ꢂ2ꢃ0
M.11ꢂ2ꢃ0
M.11ꢂ2ꢃ0
M.11ꢂ2ꢃ0
M.11ꢂ2ꢃ0
M.11ꢂ2ꢁ0
M.11ꢂ2ꢁ0
M.11ꢂ2ꢁ0
M.11ꢂ2ꢁ0
M.11ꢂ2ꢁ0
M.11ꢂ2ꢁ0
M.11ꢂ2ꢁ0
M.11ꢂ2ꢁ0
M.11ꢂ2ꢂ0
M.11ꢂ2ꢂ0
M.11ꢂ2ꢂ0
M.11ꢂ2ꢂ0
M.11ꢂ2ꢂ0
M.11ꢂ2ꢂ0
M.11ꢂ2ꢂ0
M.11ꢂ2ꢂ0
/
10-40ꢁ92
ꢂ
ꢂ
ꢂ
A
10-40ꢁ92-1ꢀ
0,ꢁꢀ-1,0
1÷2
2
1ꢂ
10-40ꢁ92-1ꢂ
ꢂ
1ꢂ÷14
10-40ꢁ92-20
ꢂ
14
10-40ꢁ92-2ꢃ
ꢂ
3
12 -14
10-40ꢁ92-30
ꢂ
4-ꢀ
ꢃ
/
10
/
10-40ꢁ92-3ꢂ
ꢂ
10-40ꢁ92-ꢀ0
ꢂ
10
10-40ꢁ92-ꢀꢂ
ꢂ
13,2
2ꢀ
ꢃ
4
/
10-1134ꢁ4-4P
4
10-1134ꢁ4-4P-22
10-1134ꢁ4-4P-2ꢃ
10-1134ꢁ4-4P-30
10-1134ꢁ4-4P-3ꢂ
10-1134ꢁ4-4P-ꢀ0
10-1134ꢁ4-4P-ꢀꢂ
10-1134ꢁ4-4P-ꢃ2
10-1134ꢁ4-1P
4
2,ꢀ
3
4
/
4
4-ꢀ
ꢃ
/
4
10
/
4
10
4
13,2
1ꢃ
ꢃ
/
4
0
ꢀ0-ꢃ0
ꢀ0
0
/
10-1134ꢁ4-1P-10ꢁ
10-1134ꢁ4-1P-ꢁ2
10-1134ꢁ4-1P-3ꢀ
10-1134ꢁ4-1P-4ꢀ
10-1134ꢁ4-1P-ꢀ0
10-1134ꢁ4-1P-ꢀꢂ
10-1134ꢁ4-1P-ꢃ2
10-1134ꢁ4-0P
0
0
22-2ꢀ
3ꢀ
4
/
0
0
9
ꢂ
/
0
10
0
13,2
1ꢃ
ꢃ
/
0
4/0
4/0
4/0
4/0
10ꢁ
2ꢀ
4/0
/
10-1134ꢁ4-0P-ꢁꢂ
10-1134ꢁ4-0P-10ꢁ
10-1134ꢁ4-0P-144
/
/
ꢀ0
/
/
/
ꢁ0
/
/
/
Please consult our sales department for other contact options or crimp tooling details.
Insertion and Removal Tools
Insertion Tool
Removal Tool
© 2016 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Catalog Title
Dimensions in Inches (millimeters) are subject to change without notice.
A-ꢇꢅ
CONNECTOR CONTACTS
IT - ITS - ITS-RG - ITZ Connectors
Socket Crimp Contacts - Insertion and Removal Tools
Insertion and Removal Tools Table
Wire Size
Insertion Tool
Removal Tool
Part Number
Contact Size
Guide Pin
2
mm
AWG
2ꢃ-20
2ꢃ-20
1ꢂ-1ꢃ
20
Glenair P/N
M.11ꢁ34ꢃ
M.11ꢁ34ꢃ
M.11ꢁ0ꢂ3
M.11ꢁ0ꢂ3
M.11ꢁ34ꢃ
M.11ꢁ0ꢂ3
M.11ꢁ0ꢂ3
M.11ꢁ0ꢂ2
M.11ꢁ0ꢂ3
M.11ꢁ34ꢃ
M.11ꢁ0ꢂ3
M.11ꢁ34ꢃ
M.11ꢁ0ꢂ3
M.11ꢁ0ꢂ3
M.11ꢁ0ꢂ3
M.11ꢁ0ꢂ2
M.11ꢁ0ꢂ3
M.11ꢁ0ꢂ2
M.11ꢁ0ꢂ3
M.11ꢁ0ꢂ3
M.11ꢁ0ꢂ2
M.11ꢁ0ꢂ2
M.11ꢁ0ꢂ2
M.11ꢁ0ꢂ2
M.11ꢁ0ꢂ2
M.11ꢁ0ꢂ2
Glenair P/N
M.11ꢂ2ꢀ1
M.11ꢂ249
M.11ꢂ2ꢀ0
M.11ꢂ2ꢀ0
M.11ꢂ2ꢀ0
M.11ꢂ2ꢀ0
M.11ꢂ2ꢀ0
M.11ꢂ2ꢀ0
M.11ꢂ2ꢀ0
M.11ꢂ2ꢀ0
M.11ꢂ2ꢀ0
M.11ꢂ2ꢀ0
M.11ꢂ2ꢀ0
M.11ꢂ2ꢀ0
M.11ꢂ2ꢀ0
M.11ꢂ2ꢀ0
M.11ꢂ2ꢀ0
M.11ꢂ2ꢀ0
M.11ꢂ2ꢀ0
M.11ꢂ2ꢀ0
M.11ꢂ2ꢀ0
M.11ꢂ2ꢀ0
M.11ꢂ2ꢀ0
M.11ꢂ2ꢀ0
M.11ꢂ2ꢀ0
M.11ꢂ2ꢀ0
A
10-40ꢀ20LC
10-40ꢀꢂꢂ
20
1ꢂ
0,1ꢀ-0,ꢃ
0,1ꢀ-0,ꢃ
1-1,ꢀ
0,ꢃ
M.12ꢀ00ꢁ
M.12ꢀ000
M.12ꢀ001
M.12ꢀ001
M.12ꢀ001
M.12ꢀ001
M.12ꢀ001
M.12ꢀ001
M.12ꢀ001
M.12ꢀ001
M.12ꢀ001
M.12ꢀ001
M.12ꢀ001
M.12ꢀ001
M.12ꢀ001
M.12ꢀ001
M.12ꢀ001
M.12ꢀ002
M.12ꢀ002
M.12ꢀ002
M.12ꢀ002
M.12ꢀ002
M.12ꢀ002
M.12ꢀ002
M.12ꢀ002
M.12ꢀ002
10-40ꢀꢀ2
1ꢃS
1ꢃS
1ꢃS
1ꢃS
1ꢃS
1ꢃS
1ꢃ
10-40ꢀꢀ2-12
10-40ꢀꢀ2-13
10-40ꢀꢀ2-1ꢀ
10-40ꢀꢀ2-20
10-40ꢀꢀ2-2ꢃ
10-40ꢀꢀꢃ
0,1ꢀ-0,ꢃ
0,ꢁꢀ-1
1-2
2ꢃ-20
1ꢂ
14
2,ꢀ-3,0
1-1,ꢀ
0,1ꢀ-0,2
0,ꢃ
12
1ꢂ-1ꢃ
2ꢃ-24
20
10-40ꢀꢀꢃ-0ꢂ
10-40ꢀꢀꢃ-12
10-40ꢀꢀꢃ-13
10-40ꢀꢀꢃ-1ꢀ
10-40ꢀꢀꢃ-20
10-40ꢀꢀꢃ-22
10-40ꢀꢀꢃ-2ꢃ
10-40ꢀꢀꢃ-32
10-40ꢀꢃ0
1ꢃ
1ꢃ
1ꢃ
0,1ꢀ-0,ꢃ
0,ꢁꢀ-1
1-2
2ꢃ-20
1ꢂ
1ꢃ
1ꢃ
14
1ꢃ
2,ꢀ
/
1ꢃ
2,ꢀ-3,0
/
12
1ꢃ
32-2ꢂ
12
12
2,ꢀ-3,0
0,ꢃ
10-40ꢀꢃ0-12
10-40ꢀꢃ0-1ꢀ
10-40ꢀꢃ0-1ꢁꢁ
10-40ꢀꢃ0-20
10-40ꢀꢃ0-22
10-40ꢀꢃ0-30
10-40ꢀꢃ0-30M
10-40ꢀꢃ0-3ꢂ
12
20
12
0,ꢁꢀ-1
1,ꢀ
1ꢂ
12
1ꢂ-1ꢃ
14
12
2
12
2,ꢀ
/
12
4-ꢀ
/
12
4
/
12
ꢃ
10
Please consult our sales department for other contact options or crimp tooling details.
Insertion aools
Insertion Tool
Removal Tool
Guide Pin
© 2016 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Catalog Title
Dimensions in Inches (millimeters) are subject to change without notice.
A-ꢇꢇ
CONNECTOR CONTACTS
IT - ITS - ITS-RG - ITZ Connectors
Socket Crimp Contacts - Insertion and Removal Tools
Insertion and Removal Tools Table
Wire Size
Insertion Tool
Removal Tool
Part Number
Contact Size
Guide Pin
2
mm
9
AWG
Glenair P/N
M.11ꢁ344
M.11ꢁ0ꢂ2
M.11ꢁ0ꢂ2
M.11ꢁ0ꢂ2
M.11ꢁ0ꢂ2
M.11ꢁ0ꢂ2
M.11ꢁ344
M.11ꢁ344
M.11ꢁ344
M.11ꢁ34ꢁ
M.11ꢁ0ꢂ2
M.11ꢁ0ꢂ2
M.11ꢁ0ꢂ2
M.11ꢁ344
M.11ꢁ344
M.11ꢁ344
M.11ꢁ34ꢁ
M.11ꢁ34ꢂ
M.11ꢁ34ꢂ
M.11ꢁ34ꢁ
M.11ꢁ34ꢂ
M.11ꢁ344
M.11ꢁ344
M.11ꢁ344
M.11ꢁ34ꢁ
/
Glenair P/N
M.11ꢂ2ꢃ0
M.11ꢂ2ꢃ0
M.11ꢂ2ꢃ0
M.11ꢂ2ꢃ0
M.11ꢂ2ꢃ0
M.11ꢂ2ꢃ0
M.11ꢂ2ꢃ0
M.11ꢂ2ꢃ0
M.11ꢂ2ꢃ0
M.11ꢂ2ꢁ0
M.11ꢂ2ꢁ0
M.11ꢂ2ꢁ0
M.11ꢂ2ꢁ0
M.11ꢂ2ꢁ0
M.11ꢂ2ꢁ0
M.11ꢂ2ꢁ0
M.11ꢂ2ꢁ0
M.11ꢂ2ꢂ0
M.11ꢂ2ꢂ0
M.11ꢂ2ꢂ0
M.11ꢂ2ꢂ0
M.11ꢂ2ꢂ0
M.11ꢂ2ꢂ0
M.11ꢂ2ꢂ0
M.11ꢂ2ꢂ0
/
A
10-40ꢁ93-1
10-40ꢁ93-1-1ꢀ
ꢂ
ꢂ
ꢂ
M.12ꢀ003
0,ꢁꢀ-1
1-2
2
1ꢂ
M.12ꢀ003
10-40ꢁ93-1-1ꢂ
ꢂ
1ꢂ-14
M.12ꢀ003
10-40ꢁ93-1-20
ꢂ
14
12
/
M.12ꢀ003
10-40ꢁ93-1-2ꢃ
ꢂ
3
M.12ꢀ003
10-40ꢁ93-1-30
ꢂ
4-ꢀ
ꢃ
M.12ꢀ003
10-40ꢁ93-1-3ꢂ
ꢂ
10
/
M.12ꢀ003
10-40ꢁ93-1-ꢀ0
ꢂ
10
M.12ꢀ003
10-10ꢁ93-1-ꢀꢂ
ꢂ
13,2
22-2ꢀ
2,ꢀ
3
ꢃ
4
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
10-1134ꢁ4-4S-1
10-1134ꢁ4-4S-1-22
10-1134ꢁ4-4S-1-2ꢃ
10-1134ꢁ4-4S-1-30
10-1134ꢁ4-4S-1-3ꢂ
10-1134ꢁ4-4S-1-ꢀ0
10-1134ꢁ4-4S-1-ꢀꢂ
10-1134ꢁ4-4S-ꢃ2
10-1134ꢁ4-1S
4
4
4
/
4
4-ꢀ
ꢃ
/
4
10
/
4
10
4
13,2
1ꢃ
ꢃ
/
4
0
ꢀ0-ꢃ0
ꢀ0
0
/
10-1134ꢁ4-1S-10ꢁ
10-1134ꢁ4-1S-ꢁ2
10-1134ꢁ4-1S-3ꢀ
10-1134ꢁ4-1S-4ꢀ
10-1134ꢁ4-1S-ꢀ0
10-1134ꢁ4-1S-ꢀꢂ
10-1134ꢁ4-1S-ꢃ2
10-1134ꢁ4-0S
0
0
22-2ꢀ
3ꢀ
4
/
0
0
9
ꢂ
/
0
10
0
13,2
1ꢃ
ꢃ
/
0
4/0
4/0
4/0
4/0
10ꢁ
22-2ꢀ
ꢀ0
4/0
4
/
10-1134ꢁ4-0S-ꢁꢂ
10-1134ꢁ4-0S-10ꢁ
10-1134ꢁ4-0S-144
/
/
/
/
ꢁ0
/
/
/
Please consult our sales department for other contact options or crimp tooling details.
Insertion and R
Insertion Tool
Removal Tool
Guide Pin
© 2016 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Catalog Title
Dimensions in Inches (millimeters) are subject to change without notice.
A-ꢇꢈ
CONNECTOR CONTACTS
IT - ITS - ITS-RG - ITZ Connectors
Pin Crimp Contacts - Manual and Pneumatic Tools
Manual and Pneumatic Tools Table
Wire Size
Manual Crimp Tool
Pneumatic Tool Type “A”
Pneumatic Tool Turret
Contact
Size
Part Number
2
mm
AWG
Manual Tool
Turret
A
10-3ꢁꢀ-20
10-40ꢀꢁ9
20
1ꢂ
0,1ꢀ-0,ꢃ
0,1ꢀ÷0,ꢃ
1÷1,ꢀ
0.ꢃ
2ꢃ÷20
2ꢃ÷20
1ꢂ÷1ꢃ
20
M.10ꢀ001
M.10ꢀ001
M.10ꢀ00ꢁ
M.10ꢀ00ꢁ
M.10ꢀ001
M.10ꢀ00ꢁ
M.10ꢀ00ꢁ
M.10ꢀ00ꢁ
M.10ꢀ00ꢁ
M.10ꢀ00ꢁ
M.10ꢀ001
M.10ꢀ00ꢁ
M.10ꢀ001
M.10ꢀ00ꢁ
M.10ꢀ00ꢁ
M.10ꢀ00ꢁ
M.10ꢀ00ꢁ
M.10ꢀ00ꢁ
M.10ꢀ00ꢁ
M.10ꢀ00ꢁ
M.10ꢀ00ꢁ
M.10ꢀ00ꢁ
M.10ꢀ00ꢁ
M.10ꢀ00ꢁ
M.10ꢀ00ꢁ
M.10ꢀ00ꢁ
M.10ꢀ00ꢁ
M.10ꢀ00ꢁ
M.10ꢀ02ꢃ
M.10ꢀ02ꢀ
M.10ꢀ009
M.10ꢀ009
M.10ꢀ009
M.10ꢀ009
M.10ꢀ009
M.10ꢀ009
M.10ꢀ009
M.10ꢀ012
M.10ꢀ009
M.10ꢀ009
M.10ꢀ009
M.10ꢀ009
M.10ꢀ009
M.10ꢀ009
M.10ꢀ012
M.10ꢀ009
M.10ꢀ009
M.10ꢀ009
M.10ꢀ009
M.10ꢀ009
M.10ꢀ009
M.10ꢀ009
M.10ꢀ009
M.10ꢀ009
M.10ꢀ009
M.10ꢀ009
M.10ꢀ003
M.10ꢀ003
M.10ꢀ002
M.10ꢀ002
M.10ꢀ003
M.10ꢀ002
M.10ꢀ002
M.10ꢀ002
M.10ꢀ002
M.10ꢀ002
M.10ꢀ003
M.10ꢀ003
M.10ꢀ003
M.10ꢀ002
M.10ꢀ002
M.10ꢀ002
M.10ꢀ002
M.10ꢀ002
M.10ꢀ003
M.10ꢀ002
M.10ꢀ003
M.10ꢀ002
M.10ꢀ002
M.10ꢀ002
M.10ꢀ002
M.10ꢀ002
M.10ꢀ002
M.10ꢀ002
M.10ꢀ02ꢃ
M.10ꢀ02ꢀ
M.10ꢀ009
M.10ꢀ009
M.10ꢀ009
M.10ꢀ009
M.10ꢀ009
M.10ꢀ009
M.10ꢀ012
M.10ꢀ009
M.10ꢀ009
M.10ꢀ009
M.10ꢀ009
M.10ꢀ009
M.10ꢀ009
M.10ꢀ009
M.10ꢀ012
M.10ꢀ009
M.10ꢀ009
M.10ꢀ009
M.10ꢀ009
M.10ꢀ009
M.10ꢀ009
M.10ꢀ009
M.10ꢀ009
M.10ꢀ009
M.10ꢀ009
M.10ꢀ009
10-40ꢀꢀ3
1ꢃS
1ꢃS
1ꢃS
1ꢃS
1ꢃS
1ꢃS
1ꢃ
10-40ꢀꢀ3-12
10-40ꢀꢀ3-13
10-40ꢀꢀ3-1ꢀ
10-40ꢀꢀ3-20
10-40ꢀꢀ3-2ꢃ
10-40ꢀꢀꢁ
0,1ꢀ÷0,ꢃ
0,ꢁꢀ-1,0
1-2
2ꢃ÷20
1ꢂ
14
2,ꢀ-3,0
1÷1,ꢀ
1÷1,ꢀ
0,1ꢀ÷0,2
0,ꢃ
12
1ꢂ÷1ꢃ
1ꢂ÷1ꢃ
2ꢃ÷24
20
10-40ꢀꢀꢁL
1ꢃ
10-40ꢀꢀꢁ-0ꢂ
10-40ꢀꢀꢁ-12
10-40ꢀꢀꢁ-13
10-40ꢀꢀꢁ-1ꢀ
10-40ꢀꢀꢁ-20
10-40ꢀꢀꢁ-22
10-40ꢀꢀꢁ-22L
10-40ꢀꢀꢁ-2ꢃ
10-40ꢀꢀꢁ-32
10-40ꢀꢃ1
1ꢃ
1ꢃ
1ꢃ
0,1ꢀ÷0,ꢃ
0,ꢁꢀ-1,0
1-2
2ꢃ÷20
1ꢂ
1ꢃ
1ꢃ
14
1ꢃ
2,ꢀ
/
1ꢃ
2,ꢀ
/
1ꢃ
2,ꢀ-3,0
/
12
1ꢃ
32÷2ꢂ
12
12
2,ꢀ-3,0
0,ꢃ
10-40ꢀꢃ1-12
10-40ꢀꢃ1-1ꢀ
10-40ꢀꢃ1-1ꢁꢁ
10-40ꢀꢃ1-20
10-40ꢀꢃ1-22
10-40ꢀꢃ1-30
10-40ꢀꢃ1-30M
10-40ꢀꢃ1-3ꢂ
12
20
12
0,ꢁꢀ-1,0
1,ꢀ
1ꢂ
12
1ꢂ-1ꢃ
14
12
2
12
2,ꢀ
/
12
4-ꢀ
/
12
4
/
12
ꢃ
10
Please consult our sales department for other contact options or crimp tooling details.
Manual and Pneumatic Tools
Manual Crimp Tool
Turret for Manual Crimp Tool
Pneumatic Crimp Tool
Type “A”
Turret for Pneumatic Crimp Tool
Type “A”
© 2016 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Catalog Title
Dimensions in Inches (millimeters) are subject to change without notice.
A-ꢇꢉ
CONNECTOR CONTACTS
IT - ITS - ITS-RG - ITZ Connectors
Pin Crimp Contacts - Manual and Pneumatic Tools
Manual and Pneumatic Tools Table
Wire Size
2
Manual Crimp Tool
Pneumatic Tool Type “B”
Pneumatic
Tool
M.112000 M.112001 M.112309
Oleodinamic Tool
Contact
Size
Part Number
Oleodinamic
Manual Tool
Turret
Die
Locator
Die
mm
AWG
Tool
A
10-40ꢁ92
ꢂ
ꢂ
9
0,ꢁꢀ-1,0
1÷2
2
ꢂ
/
/
M.112004
/
M.11200ꢀ
/
10-40ꢁ92-1ꢀ
1ꢂ
M.10ꢀ02ꢂ
M.104002
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
10-40ꢁ92-1ꢂ
ꢂ
1ꢂ÷14
M.10ꢀ02ꢂ
M.104002
/
/
10-40ꢁ92-20
ꢂ
14
M.10ꢀ02ꢂ
M.104002
/
/
10-40ꢁ92-2ꢃ
ꢂ
3
12 -14
M.10ꢀ02ꢂ
M.104002
/
/
10-40ꢁ92-30
ꢂ
4-ꢀ
ꢃ
/
10
/
M.10ꢀ02ꢂ
M.104002
M.112004
M.112004
M.112004
M.112004
M.112004
M.112004
M.112004
M.112004
M.112004
M.112004
M.112004
M.112004
M.112004
M.112004
M.112004
M.112004
M.112004
M.112004
M.112004
M.112004
M.10ꢀ013
M.112004
M.112004
M.10ꢀ013
M.11200ꢂ
M.11200ꢀ
M.11200ꢀ
M.11200ꢀ
M.11200ꢃ
M.112009
M.112009
M.11200ꢂ
M.11200ꢀ
M.11200ꢀ
M.11200ꢀ
M.11200ꢃ
M.112010
M.112010
M.11200ꢃ
M.11200ꢁ
M.11200ꢀ
M.11200ꢀ
M.11200ꢀ
M.11200ꢃ
M.112012
M.11200ꢃ
M.112010
M.10ꢀ0ꢀ3
10-40ꢁ92-3ꢂ
ꢂ
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
M.112000 M.112001 M.112309
M.112000 M.112001 M.112309
M.112000 M.112001 M.112309
M.112000 M.112002 M.112311
10-40ꢁ92-ꢀ0
ꢂ
10
10-40ꢁ92-ꢀꢂ
ꢂ
13,2
2ꢀ
ꢃ
4
/
10-1134ꢁ4-4P
4
10-1134ꢁ4-4P-22
10-1134ꢁ4-4P-2ꢃ
10-1134ꢁ4-4P-30
10-1134ꢁ4-4P-3ꢂ
10-1134ꢁ4-4P-ꢀ0
10-1134ꢁ4-4P-ꢀꢂ
10-1134ꢁ4-4P-ꢃ2
10-1134ꢁ4-1P
4
2,ꢀ
3
/
/
/
/
/
/
/
/
/
4
/
4
4-ꢀ
ꢃ
/
4
10
/
M.112000 M.112001 M.112311
M.112000 M.112001 M.112311
M.112000 M.112001 M.112311
M.112000 M.112002 M.112311
M.112000 M.112003 M.112313
M.112000 M.112003 M.112313
4
10
4
13,2
1ꢃ
ꢃ
/
4
0
ꢀ0-ꢃ0
ꢀ0
0
/
10-1134ꢁ4-1P-10ꢁ
10-1134ꢁ4-1P-ꢁ2
10-1134ꢁ4-1P-3ꢀ
10-1134ꢁ4-1P-4ꢀ
10-1134ꢁ4-1P-ꢀ0
10-1134ꢁ4-1P-ꢀꢂ
10-1134ꢁ4-1P-ꢃ2
10-1134ꢁ4-0P
0
0
22-2ꢀ
3ꢀ
4
/
0
/
/
/
0
9
ꢂ
/
0
10
0
13,2
1ꢃ
ꢃ
/
0
4/0
4/0
4/0
4/0
10ꢁ
2ꢀ
4/0
/
/
/
/
/
/
/
/
/
/
/
/
/
10-1134ꢁ4-0P-ꢁꢂ
10-1134ꢁ4-0P-10ꢁ
10-1134ꢁ4-0P-144
ꢀ0
/
ꢁ0
/
Please consult our sales department for other contact options or crimp tooling details.
Manual and Pneumatic Tools
Pneumatic Crimp Tool
Type “B”
Die For Pneumatic
Crimp Tool Type “B”
Locator for Pneumatic Crimp
Tool Type “B”
Oleodinool
Die for
Oleodinamic Crimp Tool
© 2016 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Catalog Title
Dimensions in Inches (millimeters) are subject to change without notice.
A-ꢇ5
CONNECTOR CONTACTS
IT - ITS - ITS-RG - ITZ Connectors
Socket Crimp Contacts - Manual and Pneumatic Tools
Manual and Pneumatic Tools Table
Wire Size
Manual Crimp Tool
Pneumatic Tool Type “A”
Part Number
Contact Size
2
mm
AWG
Manual Tool
Turret
Pneumatic Tool
Turret
A
10-40ꢀ20LC
10-40ꢀꢂꢂ
20
1ꢂ
0,1ꢀ-0,ꢃ
0,1ꢀ-0,ꢃ
1-1,ꢀ
0,ꢃ
2ꢃ-20
2ꢃ-20
1ꢂ-1ꢃ
20
M.10ꢀ001
M.10ꢀ001
M.10ꢀ00ꢁ
M.10ꢀ00ꢁ
M.10ꢀ001
M.10ꢀ00ꢁ
M.10ꢀ00ꢁ
M.10ꢀ00ꢁ
M.10ꢀ00ꢁ
M.10ꢀ001
M.10ꢀ00ꢁ
M.10ꢀ001
M.10ꢀ00ꢁ
M.10ꢀ00ꢁ
M.10ꢀ00ꢁ
M.10ꢀ00ꢁ
M.10ꢀ00ꢁ
M.10ꢀ00ꢁ
M.10ꢀ00ꢁ
M.10ꢀ00ꢁ
M.10ꢀ00ꢁ
M.10ꢀ00ꢁ
M.10ꢀ00ꢁ
M.10ꢀ00ꢁ
M.10ꢀ00ꢁ
M.10ꢀ00ꢁ
M.10ꢀ02ꢃ
M.10ꢀ02ꢀ
M.10ꢀ009
M.10ꢀ009
M.10ꢀ009
M.10ꢀ009
M.10ꢀ009
M.10ꢀ009
M.10ꢀ009
M.10ꢀ009
M.10ꢀ009
M.10ꢀ009
M.10ꢀ009
M.10ꢀ009
M.10ꢀ009
M.10ꢀ009
M.10ꢀ009
M.10ꢀ009
M.10ꢀ003
M.10ꢀ003
M.10ꢀ002
M.10ꢀ002
M.10ꢀ003
M.10ꢀ002
M.10ꢀ002
M.10ꢀ002
M.10ꢀ002
M.10ꢀ003
M.10ꢀ003
M.10ꢀ003
M.10ꢀ002
M.10ꢀ002
M.10ꢀ002
M.10ꢀ002
M.10ꢀ003
M.10ꢀ002
M.10ꢀ02ꢃ
M.10ꢀ02ꢀ
M.10ꢀ009
M.10ꢀ009
M.10ꢀ009
M.10ꢀ009
M.10ꢀ009
M.10ꢀ009
M.10ꢀ009
M.10ꢀ009
M.10ꢀ009
M.10ꢀ009
M.10ꢀ009
M.10ꢀ009
M.10ꢀ009
M.10ꢀ009
M.10ꢀ009
M.10ꢀ009
10-40ꢀꢀ2
1ꢃS
1ꢃS
1ꢃS
1ꢃS
1ꢃS
1ꢃS
1ꢃ
10-40ꢀꢀ2-12
10-40ꢀꢀ2-13
10-40ꢀꢀ2-1ꢀ
10-40ꢀꢀ2-20
10-40ꢀꢀ2-2ꢃ
10-40ꢀꢀꢃ
0,1ꢀ-0,ꢃ
0,ꢁꢀ-1
1-2
2ꢃ-20
1ꢂ
14
2,ꢀ-3,0
1-1,ꢀ
0,1ꢀ-0,2
0,ꢃ
12
1ꢂ-1ꢃ
2ꢃ-24
20
10-40ꢀꢀꢃ-0ꢂ
10-40ꢀꢀꢃ-12
10-40ꢀꢀꢃ-13
10-40ꢀꢀꢃ-1ꢀ
10-40ꢀꢀꢃ-20
10-40ꢀꢀꢃ-22
10-40ꢀꢀꢃ-2ꢃ
10-40ꢀꢀꢃ-32
10-40ꢀꢃ0
1ꢃ
1ꢃ
1ꢃ
0,1ꢀ-0,ꢃ
0,ꢁꢀ-1
1-2
2ꢃ-20
1ꢂ
1ꢃ
1ꢃ
14
1ꢃ
2,ꢀ
/
1ꢃ
2,ꢀ-3,0
/
12
1ꢃ
32-2ꢂ
12
12
2,ꢀ-3,0
0,ꢃ
10-40ꢀꢃ0-12
10-40ꢀꢃ0-1ꢀ
10-40ꢀꢃ0-1ꢁꢁ
10-40ꢀꢃ0-20
10-40ꢀꢃ0-22
10-40ꢀꢃ0-30
10-40ꢀꢃ0-30M
10-40ꢀꢃ0-3ꢂ
12
20
M.10ꢀ009
M.10ꢀ009
M.10ꢀ003
M.10ꢀ002
M.10ꢀ009
M.10ꢀ009
12
0,ꢁꢀ-1
1,ꢀ
1ꢂ
12
1ꢂ-1ꢃ
14
M.10ꢀ009
M.10ꢀ009
M.10ꢀ009
M.10ꢀ009
M.10ꢀ009
M.10ꢀ009
M.10ꢀ002
M.10ꢀ002
M.10ꢀ002
M.10ꢀ002
M.10ꢀ002
M.10ꢀ002
M.10ꢀ009
M.10ꢀ009
M.10ꢀ009
M.10ꢀ009
M.10ꢀ009
M.10ꢀ009
12
2
12
2,ꢀ
/
12
4-ꢀ
/
12
4
/
12
ꢃ
10
Please consult our sales department for other contact options or crimp tooling details.
Manual and Pneumatic Tools
Manual Crimp Tool
Turret for Manual Crimp Tool
Pneumatic Crimp Tool
Type “A”
Turret for Pneumatic Crimp Tool
Type “A”
© 2016 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Catalog Title
Dimensions in Inches (millimeters) are subject to change without notice.
A-ꢇ6
CONNECTOR CONTACTS
IT - ITS - ITS-RG - ITZ Connectors
Socket Crimp Contacts - Manual and Pneumatic Tools
Manual and Pneumatic Tools Table
Wire Size
2
Manual Crimp Tool
Pneumatic Tool Type “B”
Oleodinamic Tool
Contact
Size
Part Number
Pneumatic
Oleodinamic
Die
Locator
Die
mm
AWG Manual Tool Turret
Tool
Tool
A
10-40ꢁ93-1
10-40ꢁ93-1-1ꢀ
ꢂ
ꢂ
9
0,ꢁꢀ-1
1-2
2
ꢂ
/
/
M.112000
M.112001 M.112309
M.112004
/
M.11200ꢀ
1ꢂ
M.10ꢀ02ꢂ M.104002
/
/
/
/
/
/
/
/
/
/
/
/
10-40ꢁ93-1-1ꢂ
ꢂ
1ꢂ-14
M.10ꢀ02ꢂ
M.104002
/
/
/
10-40ꢁ93-1-20
ꢂ
14
12
/
M.10ꢀ02ꢂ
M.104002
/
/
/
10-40ꢁ93-1-2ꢃ
ꢂ
3
M.10ꢀ02ꢂ
M.104002
/
/
/
10-40ꢁ93-1-30
ꢂ
4-ꢀ
ꢃ
M.10ꢀ02ꢂ
M.104002
/
M.112004
M.112004
M.112004
M.112004
M.112004
M.112004
M.112004
M.112004
M.112004
M.112004
M.112004
M.112004
M.112004
M.112004
M.112004
M.112004
M.112004
M.112004
M.112004
M.112004
M.10ꢀ013
M.112004
M.112004
M.10ꢀ013
M.11200ꢂ
M.11200ꢀ
M.11200ꢀ
M.11200ꢀ
M.11200ꢃ
M.112009
M.112009
M.11200ꢂ
M.11200ꢀ
M.11200ꢀ
M.11200ꢀ
M.11200ꢃ
M.112010
M.112010
M.11200ꢃ
M.11200ꢁ
M.11200ꢀ
M.11200ꢀ
M.11200ꢀ
M.11200ꢃ
M.112012
M.11200ꢃ
M.112010
M.10ꢀ0ꢀ3
10-40ꢁ93-1-3ꢂ
ꢂ
10
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
M.112000
M.112000
M.112000
M.112000
/
M.112001 M.112309
M.112001 M.112309
M.112001 M.112309
M.112002 M.112311
10-40ꢁ93-1-ꢀ0
ꢂ
10
10-10ꢁ93-1-ꢀꢂ
ꢂ
13,2
2ꢀ
ꢃ
4
/
10-1134ꢁ4-4S-1
10-1134ꢁ4-4S-1-22
10-1134ꢁ4-4S-1-2ꢃ
10-1134ꢁ4-4S-1-30
10-1134ꢁ4-4S-1-3ꢂ
10-1134ꢁ4-4S-1-ꢀ0
10-1134ꢁ4-4S-1-ꢀꢂ
10-1134ꢁ4-4S-ꢃ2
10-1134ꢁ4-1S
4
4
2,ꢀ
3
/
/
/
/
/
/
4
/
/
4
4-ꢀ
ꢃ
/
/
4
10
/
M.112000
M.112000
M.112000
M.112000
M.112000
M.112000
M.112000
/
M.112001 M.112311
M.112001 M.112311
M.112001 M.112311
M.112002 M.112311
M.112003 M.112313
M.112003 M.112313
M.112002 M.112313
4
10
4
13,2
1ꢃ
ꢃ
/
4
0
ꢀ0-ꢃ0
ꢀ0
0
/
10-1134ꢁ4-1S-10ꢁ
10-1134ꢁ4-1S-ꢁ2
10-1134ꢁ4-1S-3ꢀ
10-1134ꢁ4-1S-4ꢀ
10-1134ꢁ4-1S-ꢀ0
10-1134ꢁ4-1S-ꢀꢂ
10-1134ꢁ4-1S-ꢃ2
10-1134ꢁ4-0S
0
0
22-2ꢀ
3ꢀ
4
/
0
/
/
0
9
ꢂ
/
0
10
0
13,2
1ꢃ
ꢃ
/
0
4/0
4/0
4/0
4/0
10ꢁ
2ꢀ
4/0
/
/
/
/
/
/
/
/
/
/
/
/
/
10-1134ꢁ4-0S-ꢁꢂ
10-1134ꢁ4-0S-10ꢁ
10-1134ꢁ4-0S-144
ꢀ0
/
ꢁ0
/
Please consult our sales department for other contact options or crimp tooling details.
Manual and Pneumatic Tools
Pneumatic Crimp Tool
Type “B”
Die For Pneumatic
Crimp Tool Type “B”
Locator for Pneumatic Crimp
Tool Type “B”
Oleodinool
Die for
Oleodinamic Crimp Tool
© 2016 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Catalog Title
Dimensions in Inches (millimeters) are subject to change without notice.
A-ꢇ7
CONNECTOR CONTACTS
IT - ITS - ITS-RG - ITZ Connectors
DMC Tools
Daniels (DMC) tools have been utilized in military aircraft and aerospace programs for over ꢃ0 years.
Surely the leading company in crimping technology, it’s used by Glenair as first choice for these powerful tools.
Hereafter you find a cross table of P/Ns for our ruggized power and signal connectors series ITS and the other
MIL-DTL-ꢀ01ꢀ type products.
A
Tool Description
DMC P/N
Glenair P/N
Manual crimp tool
Manual crimp tool
Manual crimp tool
Turret
AFꢂ
VMꢂ
M.105001
M.105007
M.105028
M.105009
M.105012
M.105002
M.105003
M.112000
M.112001
M.112002
M.112003
M300BT
VH43ꢀ
UH2-ꢀ
Adjustable Positioner
Pneumatic crimp tool
Pneumatic crimp tool
Pneumatic crimp tool
DIE ASSY ꢂ
WA2ꢁVMꢂ
WA2ꢁF
WA23
Manual Crimp Tool
AFꢂ
WA23-2
WA23-4
WA23-ꢀ
DIE ASSY 4
DIE ASSY 1/0
Please consult our Sales Department for other options.
Turret
Adjustable Positioner
Pneumatic Crimp Tool
WA2ꢁF
Die Assy
Pneumatic Crimp Tool
WA23
© 2016 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Catalog Title
Dimensions in Inches (millimeters) are subject to change without notice.
A-ꢇ8
相关型号:
©2020 ICPDF网 联系我们和版权申明