440AS030NF2208-3
更新时间:2024-09-19 04:01:41
品牌:GLENAIR
描述:Connector Accessory, Shrink Boot Adapter, Aluminum Alloy
440AS030NF2208-3 概述
Connector Accessory, Shrink Boot Adapter, Aluminum Alloy
440AS030NF2208-3 数据手册
通过下载440AS030NF2208-3数据手册来全面了解它。这个PDF文档包含了所有必要的细节,如产品概述、功能特性、引脚定义、引脚排列图等信息。
PDF下载440-030
EMI/RFI Banding and Shrink Boot Adapter
Rotatable Coupling - Standard Profile
440 F S 030 M 20 12-8 B P T S
Slot Option
Product Series
CONNECTOR
DESIGNATORS
(Omit if not required)
Connector Designator
Shrink Boot (Table IV -
Omit for none)
Angle and Profile
H = 45°
A-F-H-L
ROTATABLE
COUPLING
Polysulfide (Omit for none)
J = 90°
S = Straight
B = Band
K = Precoiled Band
(Omit for none)
Basic Part No.
Length: S only
(1/2 inch increments,
e.g. 8 = 4.000 inches)
Finish (Table II)
Shell Size (Table I)
Cable Entry (Table IV)
Length ± .060 (1.52)
Min. Order Length 1.5 in.
(See Note 4)
O-Ring
.135 (3.4)
Typ
A Thread
Typ. (Table I)
.075 (1.9) Ref
Typ
Length ± .060 (1.52)
Min. Order Length 2.0 in.
C Typ.
(Table I)
L
Typ*
K
Typ*
M
Typ* *(Table IV)
Sym S
Straight
STYLE 2
STRAIGHT
(See Note 1)
.060 (1.5) Typ
Knurl Style Mfr
Option - Typ
.380 (9.7) Typ
.88 (22.4)
Max
E
G
(Table III)
45°
(Table III)
F (Table III)
Sym H
45°
Sym J
90°
H
STYLE 2
45° & 90°
(Table III)
(See Note 1)
Termination Area
Free Of Cadmium.
Knurl Or Ridges
Mfrs Option
.146
S Option
See Part Number
Development
Polysulfide Stripes
P Option
J
Band Option
(K Option Shown
See Note 6)
© 2005 Glenair, Inc.
CAGE Code 06324
Rev. 11.10.14
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-Mail: sales@glenair.com
Series 440 - Page 12
440-030
EMI/RFI Banding and Shrink Boot Adapter
Rotatable Coupling - Standard Profile
See inside back cover fold-out or pages 13 and 14 for Tables I and II.
TABLE III: ELBOW DIMENSIONS
Shell Size
Conn. Desig.
E ***
Max
G ***
Max
F
Max
H ***
Max
H
A-F-L
.531 (13.5)
.594 (15.1)
.618 (15.7)
.656 (16.7)
.688 (17.5)
.748 (19.0)
.773 (19.6)
.800 (20.3)
.823 (20.9)
1.041 (26.4)
1.092 (27.7)
1.136 (28.9)
.639 (16.2)
.664 (16.9)
.688 (17.5)
.705 (17.9)
.732 (18.6)
.803 (20.4)
1.031 (26.2)
1.156 (29.4)
1.219 (31.0)
1.281 (32.5)
1.593 (40.5)
1.718 (43.6)
.940 (23.9)
1.000 (25.4)
1.050 (26.7)
1.090 (27.7)
1.150 (29.2)
1.190 (30.2)
1.250 (31.8)
1.320 (33.5)
1.380 (35.1)
1.500 (38.1)
1.620 (41.1)
1.750 (44.5)
1.110 (28.2)
1.140 (29.0)
1.160 (29.5)
1.190 (30.2)
1.210 (30.7)
1.221 (31.0)
1.281 (32.5)
1.351 (34.3)
1.410 (35.8)
1.531 (38.9)
1.651 (41.9)
1.781 (45.2)
09
11
13
15
17
19
21
23
25
08
10
12
14
16
18
20
22
24
28
32
36
1. When maximum cable
entry (page 21) is ex-
ceeded, Style 2 will be
supplied. Dimensions
E, F, G, and H will not
apply. Please consult
factory.
2. Metric dimensions (mm)
are indicated in paren-
theses.
3. Interface O-Ring not
supplied with Connector
Designator A.
4. Consult factory for short-
er lengths on straight
backshells.
5. See page 40 Shrink
Boot Reference Informa-
tion.
6. Backshells supplied with
600-052-* band, see
Glenair Series 600 Tool
Catalog for installation.
*** These maximum dimensions are increased by .187 (4.7) when parts are
fabricated from stainless steel, and connector designator is “S”.
TABLE IV: CABLE ENTRY
Dash
No.
01
31
02
32
03
33
04
34
05
35
06
36
07
37
08
38
09
10
11
Shrink
Boot
J
K
L
M
.125 (3.2)
.170 (4.3)
.170 (4.3)
.170 (4.3)
.250 (6.4)
.250 (6.4)
.250 (6.4)
.250 (6.4)
.500 (12.7)
.500 (12.7)
.500 (12.7)
.500 (12.7)
.500 (12.7)
.500 (12.7)
.125 (3.2)
.188 (4.8)
.250 (6.4)
.312 (7.9)
.375 (9.5)
.438 (11.1)
.500 (12.7)
.562 (14.3)
.625 (15.9)
.688 (17.5)
.750 (19.1)
.812 (20.6)
.250 (6.4)
.312 (7.9)
.375 (9.5)
.438 (11.1)
.500 (12.7)
.562 (14.3)
.625 (15.9)
.688 (17.5)
.750 (19.1)
.812 (20.6)
.875 (22.2)
.312 (7.9) 770-003S111
.374 (9.5) 770-003S111
.437 (11.1) 770-003S112
.500 (12.7) 770-003S112
.562 (14.3) 770-003S112
.624 (15.8) 770-001S104
.687 (17.4) 770-001S104
.750 (19.1) 770-001S104
.812 (20.6) 770-001S104
.874 (22.2) 770-001S104
.937 (23.8) 770-001S105
.938 (23.8) 1.000 (25.4) 770-001S105
.875 (22.2) 1.000 (25.4) 1.062 (27.0) 770-001S105
.938 (23.8) 1.062 (27.0) 1.124 (28.5) 770-001S105
.500 (12.7) 1.000 (25.4) 1.125 (28.6) 1.187 (30.1) 770-001S106
.500 (12.7) 1.062 (27.0) 1.188 (30.2) 1.250 (31.8) 770-001S106
.500 (12.7) 1.125 (28.6) 1.250 (31.8) 1.312 (33.3) 770-001S107
.750 (19.1) 1.250 (31.8) 1.375 (34.9) 1.437 (36.5) 770-001S107
.750 (19.1) 1.375 (34.9) 1.500 (38.1) 1.562 (39.7) 770-001S107
1.000 (25.4) 1.500 (38.1) 1.625 (41.3) 1.687 (42.8) 770-001S107
1.000 (25.4) 1.625 (41.3) 1.750 (44.5) 1.812 (46.0) 770-001S108
1.000 (25.4) 1.750 (44.5) 1.875 (47.6) 1.937 (49.2) 770-001S108
1.000 (25.4) 1.875 (47.6) 2.000 (50.8) 2.062 (52.4) 770-001S109
1.000 (25.4) 2.000 (50.8) 2.125 (54.0) 2.187 (55.5) 770-001S109
Now Available
with the “NESTOR”
12
13
14
15
16
Add “-445” to Specify
Glenair’s Non-Detent,
Spring-Loaded, Self-
Locking Coupling. See
Page 41 for Details.
© 2005 Glenair, Inc.
CAGE Code 06324
Rev. 11.10.14
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-Mail: sales@glenair.com
Series 440 - Page 13
TABLE I - BACKSHELL INTERFACE DIMENSIONS
CONNECTORDESIGNATOR
A THREAD*
REFERENCE
7/16 – 28 UNEF
M12 x 1 – 6H
1/2 – 20 UNF
1/2 – 28 UNEF
9/16 – 24 UNEF
M15 x 1 – 6H
5/8 – 24 UNEF
5/8 – 28 UN
11/16 – 24 UNEF
M18 x 1 – 6H
3/4 – 20 UNEF
13/16 – 20 UNEF
M22 x 1 – 6H
7/8 – 20 UNEF
7/8 – 28 UN
B
C
D
E
A
C*
D
E
F
G
H
J
K
08
L
08
S
08
DIA MAX
.590 (15.) .650 (16.5) .770 (19.6)
.650 (16.5) .770 (19.6)
DIA MAX
DIA MAX
DIA MAX
.690 (17.5)
.940 (24.8)
.690 (17.5)
08
08 08 [9]
10 10 [11]
12 [13]
09 [A]
08
03
10
.650 (16.5) .650 (16.5)
08 [A] 10
11
.650 (16.5) .770 (19.6) .770 (19.6)
.720 (18.3) .770 (19.6) .890 (22.6)
.770 (19.6) .820 (20.8)
.770 (19.6) .770 (19.6) .890 (22.6)
.770 (19.6) .890 (22.6)
.840 (21.3) .890 (22.6) 1.020 (25.9)
.890 (22.6) .940 (23.9)
.970 (24.6) .940 (23.9) 1.020 (25.9)
.970 (24.6) 1.020 (29.2) 1.150 (29.2) 1.060 (26.9)
1.030 (26.2) 1.070 (26.2) 1.290 (32.7)
1.090 (27.7) 1.020 (25.9) 1.150 (29.2) 1.060 (26.9)
1.030 (26.2) 1.150 (29.2)
10
10
10
.820 (20.8)
1.060 (26.9)
.820 (20.8)
11 [B]
12 [13]
10 [B]
12
14
12
14
12
14
.940 (23.8)
1.170 (29.7)
.940 (23.8)
13 [C]
15 [D]
12 [7] 12
14 [12] 14
12
11 [A]
13 [B]
14 [15]
16 [17]
14 14 [15]
14 [D]
16 [E]
18 [F]
20 [G]
22 [H]
24 [J]
16
18
20
22
24
16 16 [17]
18 18 [19]
20 20 [21]
22 22 [23]
16
18
20
22
24
16
15/16 – 20 UNEF
M25 x 1 – 6H
1 – 20 UNEF
1 - 28 UN
1.090 (27.7) 1.150 (29.2) 1.260 (32.0) 1.170 (29.7)
17 [E]
19 [F]
21 [G]
23 [H]
25 [J]
1.150 (29.2) 1.210 (30.7)
1.420 (36.1)
16 [19] 16
15 [C]
17 [D]
19 [E]
18
20
22
24
1.220 (29.2) 1.210 (30.7) 1.230 (31.2) 1.170 (29.7)
1.150 (29.2) 1.360 (34.5)
1.220 (31.0) 1.230 (31.2) 1.400 (35.6) 1.290 (32.7)
18 [27]
18
18 1 1/16 – 18 UNEF
M28 x 1 – 6H
1.280 (32.5) 1.360 (34.5)
1.540 (39.1)
1 1/8 – 18 UNEF
1 1/8 – 28 UN
1.340 (34.0) 1.360 (34.5) 1.360 (34.5)
1.280 (32.5) 1.480 (37.6)
1.340 (34.0) 1.360 (34.5 1.530 (38.9) 1.420 (36.0)
20 [37]
20
20 1 3/16 – 18 UNEF
M31 x 1 – 6H
1.410 (35.8) 1.480 (37.6)
1.670 (42.4)
1 1/4 – 18 UNEF
1 1.4 – 28 UN
1.470 (37.3) 1.530 (38.9) 1.480 (37.6)
1.410 (35.8) 1.600 (40.6)
1.470 (37.3 1.480 (37.6) 1.600 (40.6) 1.540 (39.1)
22
22 1 5/16 – 18 UNEF
M34 x 1 - 6H
1.530 (38.9) 1.600 (40.6)
1.590 (40.4) 1.600 (40.6)
2.010 (51.1)
22
1 3/8 – 18 UNEF
1 3/8 – 28 UN
1.530 (38.9) 1.730 (43.9)
1.590 (40.4) 1.730 (43.9) 1.940 (49.3) 1.660 (42.2)
24
24 24 [25] 23 [F]
24 1 7/16 – 18 UNEF
M37 x 1 – 6H
1.660 (42.2) 1.700 (43.2)
1.660 (42.2) 1.670 (42.4)
1.660 (42.2) 1.940 (49.3)
1.820 (46.2)
2.120 (53.8)
61
1 1/2 – 18 UNEF
1 1/2 – 28 UN
1 9/16 – UNEF
1 5/8 – UNEF
1 3/4 – 18 UNS
1 7/8 – 16 UN
2 – 18 UNS
2 1/16 – 16 UNS
2 1/8 – 16 UN
2 1/4 – 16 UN
2 5/16 – 16 UNS
2 3/8 – 16 UN
2 1/2 – 16 UN
2 5/8 – 16 UN
2 3/4 – 16 UN
2 7/8 – 16 UN
3 – 16 UN
3 1/16 – 16 UN
25 [G]
24
28
32
1.840 (46.7)
1.940 (49.3)
28
28
32
32
1.970 (50.0) 1.970 (50.0)
2.090 (53.1) 2.190 (55.6) 2.190 (55.6)
2.280 (57.9) 2.220 (56.4)
2.010 (51.1)
2.260 (57.4)
29 [H]
33 [J]
2.340 (59.4) 2.440 (62.0) 2.440 (62.0)
36
40
2.340 (59.4)
2.440 (62.0)
36
36
2.530 (64.3) 2.47 (62.7)
2.590 (65.8)
2.590 (65.8)
2.780 (70.6) 2.720 (69.1)
2.910 (73.9)
2.530 (64.3)
3.040 (77.2)
2.690 (68.3)
2.690 (68.3)
40
40
44
44
48
48
2.930 (74.4)
3.030 (77.0) 2.970 (75.4)
3.160 (80.3)
3.220 (81.8) 3.220 (81.8)
3.410 (86.6)
* Code C, MIL-C-22992, Left-Hand Thread. Connector designations depicted thus [ ] are for reference only and are not to be used in part number development.
BACKSHELLINTERFACESTANDARDS(Seepages15-17formoreinformation)
DESIG. SPEC.
SERIES
DESIG. SPEC.
SERIES
DESIG. SPEC.
SERIES
DESIG. SPEC.
SERIES
A
MIL-DTL-5015MS3400
MIL-DTL-26482 2
G
H
MIL-C-28840
MIL-DTL-38999 III&IV
EN3645
MIL-C-81511 1, 2, 3 & 4
VG95329
MIL-DTL-83723 II
L
EN3372
JN 1003
A
B
C
D
E
F
PATT 602
MIL-DTL-5015 MS3100
MIL-C-22992 MS173XX
MIL-DTL-26482 1
MIL-DTL-26500 Aluminum
MIL-DTL-38999 I&II
40M38277
PAN 6433-1
PATT 614
PATT 616
NFC93422
AS81703
3
LN 29729
NFC93422
PAN 6433-2
PATT 615
VG 96912
PATT 105
PATT 603
PATT 608
MIL-DTL-83723 I&III
40M39569
DEF5326-3
EN 2997, 3646
ESC 10, 11
LN 29504
J
HE306
K
S
NFC93422 HE302
PAN 6432-1, -2
HE308,9
13
Reference Information
Standard Materials and Finishes
TABLE II - STANDARD FINISHES
GLENAIR
SYMBOL
M85049 SYMBOL
REFERENCEONLY FINISH
SPECIFICATION(S)
A
B
Cadmium Plate, Bright
AMS-QQ-P-416, Type I, Class 2
AMS-QQ-P-416, Type II, Class 3
AMS-A-8625, Type II, Class 2
AMS-A-8625, Type III, Class 1
Cadmium Plate, Olive Drab
Anodize, Black
C*
G*
J
A
Hard Coat, Anodic
Iridite, Gold Over Cadmium Plate Over MIL-C-5541, Class 3AMS-QQ-P-416, Type II,
Electroless Nickel
Class 3 over AMS-C-26074, Class 4, Grade B
Cadmium Plate, Bright Over
Electroless Nickel
1000 Hour Corrosion Resistance
LF
Electroless Nickel
AMS-C-26074, Class 4, Grade B
M
N
N
Cadmium Plate, Olive Drab Over
Electroless Nickel
AMS-QQ-P-416, Type II, Class 3 over Electroless Nickel
AMS-C-26074
Zinc Cobalt, Dark Olive Drab
96 Hour Corrosion Resistance
NC
NF
Cadmium Plate, Olive Drab Over
Electroless Nickel
1000 Hour Corrosion Resistance
W
Cadmium Plate, Bright Over
Electroless Nickel
AMS-QQ-P-416, Type I, Class 3
ASTMB 733-90, SC2, Type I, Class 5, MIL-C-26074***
T
Cadmium Plate, Black
AMS-QQ-P-416, Type II, Class 3
AMS-QQ-P-416, Type II, Class 3
U
Cadmium Plate, Black
ZU**
ZN
Zinc-Nickel Alloy, Olive Drab
ASTMB 841-91, Over Electroless Nickel 1000 Hour Salt
Spray
*
Anodize finish; not suitable for EMI Shielding or grounding applications.
** Applicable to corrosion resisting steel backshells and accessories. Consult factory for other available finishes.
The following standard materials are used for the majority of Glenair
backshells and connector accessories. However, backshell compo-
nents are not limited to those items listed, but are representative of
the elements used in Glenair's general accessory products. Contact
Glenair for applicable specifications on items not listed below.
STANDARDMATERIALS-BACKSHELLSANDACCESSORIES
MATERIAL
SPECIFICATION
AMS-QQ-A-200
ASTMB221, 209
COMPONENT
Aluminum
Machined components: such as backshell bodies, fabricated elbows, protective covers,
rotatable couplers, dummy stowage receptacles, lock nuts, G-spring support rings,
EMI ground rings, grommet followers, etc.
Aluminum
QQ-A-591
ASTMB85, 26
Die cast components: such as angular backshells, strain relief backshells, strain relief
bodies, strain relief saddles, special EMI ground rings, etc.
Backshells or strain reliefs: available in optional corrosion resisting steel; and
hardware: such as screws, washers, rivets, wire rope, sash chain, band straps, etc.
Elastomeric seals: such as O-rings, cable jacket seals, grommets, etc.
Anti-friction and thrust washers
Corrosion Resisting Steel ASTMA582 (300 Series)
AMS-QQ-S-763
Silicone
Teflon
Corrosion Resistant
Material
ZZ-R-765, MIL-R-25988
TFE
N/A
Anti-rotation device
BODY STRAP
NOTES
On all length callouts, tolerance is ± .060 unless otherwise
specified.
Glenair offers an optional stainless steel body strap for
attaching protective covers as illustrated. To specify body
strap, add suffix letter C to the end of the part number. For
example 360AS001M1610M6C.
Unless otherwise specified, the following other dimensional
tolerances will apply:
.xx = ± .03 (0.8)
.xxx = ± .015 (0.4)
Lengths = ± .060 (1.52)
Angles = ± 5°
Metric dimensions (mm) are indicated in parentheses
NOTE: For your convenience these tables have
been reproduced inside the back cover fold-out.
2-56 Screw and Nut
© 2005 Glenair, Inc.
CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-Mail: sales@glenair.com
14
Glenair Backshell and Accessory Material and Finish Options
Backshell and accessory base materials, plating options, specifications and codes
Hrs. Salt
Spray
Electrical
Conductivity
Operating Temp.
Range
RoHS
Code
Material
Finish
Finish Specification
Notes
A
AB
AL
B
C
E
Aluminum
Marine Bronze
Aluminum
Aluminum
Aluminum
Aluminum
Aluminum
Aluminum
Aluminum
Aluminum
Aluminum
Aluminum
Aluminum
Aluminum
Aluminum
Stainless Steel
Aluminum
Titanium
Cadmium, No Chromate
Unplated
AlumiPlate, Clear Chromate
Cadmium, Olive Drab
Anodize, Black
Chem Film
Anodize, Hardcoat
Cadmium, Gold
Cadmium, Gold
Cadmium, Clear
Electroless Nickel
Nickel-PTFE
Cadmium, Olive Drab
Zinc-Cobalt, Olive Drab
Cadmium, Olive Drab
Electrodeposited Nickel
Cadmium, No Chromate
Electrodeposited Nickel
Cadmium, Black
Zinc-Cobalt, Black
Zinc-Cobalt, Black
Cadmium, Black
AlumiPlate
Unplated Black
Electroless Nickel
Nickel-PTFE
Unplated Light Brown
Cadmium, Olive Drab
Zinc-Nickel, Black
Passivate
SAE-AMS-QQ-P-416 Type I Class 3
48
1000
1000
96
336
168
Conductive
Conductive
Conductive
Conductive
Non-Conductive
Conductive
Non-Conductive
Conductive
Conductive
Conductive
Conductive
Conductive
Conductive
Conductive
Conductive
Conductive
Conductive
Conductive
Conductive
Conductive
Conductive
Conductive
Conductive
Non-Conductive
Conductive
Conductive
Non-Conductive
Conductive
Conductive
Conductive
Conductive
Conductive
Conductive
Conductive
Conductive
Conductive
Conductive
Conductive
Conductive
Conductive
Conductive
-65 to +175°C
-65 to +200°C
-65 to +175°C
-65 to +175°C
-65 to +175°C
-65 to +175°C
-65 to +200°C
-65 to +175°C
-65 to +175°C
-65 to +175°C
-65 to +200°C
-65 to +175°C
-65 to +175°C
-65 to +175°C
-65 to +175°C
-65 to +200°C
-65 to +175°C
-65 to +200°C
-65 to +175°C
-65 to +175°C
-65 to +175°C
-65 to +175°C
-65 to +175°C
-65 to +175°C
-65 to +175°C
-65 to +175°C
-65 to +175°C
-65 to +175°C
-65 to +175°C
-65 to +200°C
-65 to +200°C
-65 to +175°C
-65 to +175°C
-65 to +200°C
-65 to +200°C
-65 to +175°C
-65 to +175°C
-65 to +175°C
-65 to +175°C
-65 to +175°C
-65 to +175°C
Not recommended for new projects. LF is preferred.
Marine and geophysical applications.
Approved for MIL-DTL-38999L and MIL-DTL-83513G.
Not recommended for new projects. NF is preferred.
Glenair’s standard black anodize finish.
Glenair’s standard chem film finish.
Glenair’s preferred hardcoat finish.
Not recommended for new projects. JF is preferred.
Glenair’s preferred gold cadmium finish.
Glenair’s preferred clear cadmium finish.
Glenair’s standard electroless nickel finish.
Approved for MIL-DTL-38999L and MIL-DTL-83513G.
Not recommended for new projects. NF is preferred.
Glenair’s standard olive drab zinc-cobalt finish.
Glenair’s standard olive drab cadmium finish.
Use ZM for electroless nickel alternative.
Not recommended for new projects. LF is preferred.
Glenair’s preferred finish for titanium connectors.
Not recommended for new projects. UF is preferred.
Glenair’s standard black zinc-cobalt finish.
RoHS version of UC.
Glenair’s preferred black cadmium finish.
Approved for MIL-DTL-38999L.
Glenair’s standard unplated composite.
Glenair’s standard electroless nickel finish over composite.
Approved for MIL-DTL-38999L.
Not recommended for new projects. Use XB.
Glenair’s standard olive drab cadmium finish over composite.
Glenair’s standard black zinc-nickel finish over composite.
Glenair’s standard passivated stainless steel.
Glenair’s standard gold plating for space programs.
Glenair’s standard zinc-cobalt over stainless steel.
RoHS version of ZC.
Used on hermetic connectors. Use ZM for other applications.
Glenair’s preferred nickel-plated stainless steel.
Glenair’s new 1000 Hour Grey over stainless steel.
Glenair’s standard olive drab zinc-nickel finish.
Glenair’s standard black zinc-nickel finish.
Glenair’s RoHs compliant black zinc-nickel.
Glenair’s standard black cadmium over stainless steel.
Glenair’s standard olive drab cadmium over stainless steel.
MIL-DTL-83488, Class 2, Type II over electroless nickel
SAE-AMS-QQ-P-416 Type II Class 3
AMS-A-8625 Type II Class 2
MIL-DTL-5541 Type 1 Class 3
AMS-A-8625 Type III, Class 1, .001" thick
SAE-AMS-QQ-P-416 Type II, Class 2 over electroless nickel
SAE-AMS-QQ-P-416 Type II, Class 2 over electroless nickel
SAE-AMS-QQ-P-416 Type II Class 2 over electroless nickel
AMS-C-26074 Class 4 Grade B; ASTM-B-733, SC 2, Type IV
GMF-002 Type II Class 1
SAE-AMS-QQ-P-416 Type II Class 3 over electroless nickel
ASTM B 840 Grade 6 Type D over electroless nickel
SAE-AMS-QQ-P-416 Type II Class 2 over electroless nickel
SAE-AMS-QQ-N-290 Class 1 Grade F
SAE-AMS-QQ-P-416 Type I Class 3
SAE-AMS-QQ-N-290 Class 1 Grade F
SAE-AMS-QQ-P-416 Type I Class 3
ASTM B 840 Grade 6 Type D over electroless nickel
ASTM B 840 Grade 6 Type D over electroless nickel
SAE-AMS-QQ-P-416 Type II Class 2 over electroless nickel
MIL-DTL-86448, Class 2, Type II over electroless nickel
G
J
336
500
JF
LF
M
MT
N
NC
NF
P
1000
1000
48
1000
500
350
1000
500
48
96
48
350
T
TP2
U
Aluminum
Aluminum
UC
UCR Aluminum
350
UF
XAL
XB
Aluminum
Composite
Composite
Composite
1000
2000
2000
2000
2000
2000
2000
2000
1000
48
XM
AMS-C-26074
GMS-002 Class 2 Type II
XMT Composite
XO
XW
XZN Composite
Z1
Z2
ZC
ZCR
ZL
Composite
Composite
SAE-AMS-QQ-P-416 Type II Class 3 over electroless nickel
ASTM B841 Grade 5 over electroless nickel
SAE-AMS-SAE-AMS-QQ-P-35 Type VI
MIL-DTL-45204 Class 1 over electroless nickel
ASTM-B840, Grade 6
ASTM-B840, Grade 6
SAE-AMS-QQ-N-290 Class 1 Grade F
AMS-C-26074 Class 1 Grade A
Stainless Steel
Aluminum
Stainless Steel
Stainless Steel
Stainless Steel
Stainless Steel
Gold
Zinc-Cobalt, Black
Zinc-Cobalt, Black
Electrodeposited Nickel
Electroless Nickel
Nickel-PTFE
Zinc-Nickel, Olive Drab
Zinc-Nickel, Black
Zinc-Nickel, Black
Cadmium, Black
Cadmium, Olive Drab
1000
ZM
ZMT Stainless Steel
ZN Aluminum
ZNU Aluminum
ZR
ZU
ZW
GMF-002 Type II Class 3
1000
1000
1000
500
1000
2000
ASTM B841 Grade 5 over electroless nickel
ASTM B841 Grade 5 over electroless nickel
ASTM B841 Grade 5 over electroless nickel
SAE-AMS-QQ-P-416 Type II Class 3
Aluminum
Stainless Steel
Stainless Steel
SAE-AMS-QQ-P-416 Type II Class 2 over electroless nickel
440AS030NF2208-3 相关器件
型号 | 制造商 | 描述 | 价格 | 文档 |
440AS030NF2212-3 | GLENAIR | Connector Accessory, Shrink Boot Adapter, Aluminum Alloy | 获取价格 | |
440AS030NF2403-2 | GLENAIR | Connector Accessory, Shrink Boot Adapter, Aluminum Alloy | 获取价格 | |
440AS030NF2405-3B | GLENAIR | Connector Accessory, | 获取价格 | |
440AS030NF2405-4 | GLENAIR | Connector Accessory, Shrink Boot Adapter, Aluminum Alloy | 获取价格 | |
440AS030NF2407-4B | GLENAIR | Connector Accessory, | 获取价格 | |
440AS030NF2408-5 | GLENAIR | Connector Accessory, Shrink Boot Adapter, Aluminum Alloy | 获取价格 | |
440AS030NF2408-6 | GLENAIR | Connector Accessory, Shrink Boot Adapter, Aluminum Alloy | 获取价格 | |
440AS030NF2409-3 | GLENAIR | Connector Accessory, Shrink Boot Adapter, Aluminum Alloy | 获取价格 | |
440AS030NF2409-6 | GLENAIR | Connector Accessory, Shrink Boot Adapter, Aluminum Alloy | 获取价格 | |
440AS030NF2410-5BT | GLENAIR | Connector Accessory, | 获取价格 |
440AS030NF2208-3 相关文章
- 2024-09-20
- 5
- 2024-09-20
- 9
- 2024-09-20
- 8
- 2024-09-20
- 6