660-049XM11H5-10 [GLENAIR]
Connector Accessory, Cover Item, Composite, ROHS COMPLIANT;
| 型号： | 660-049XM11H5-10 |
| 厂家： | 
Glenair |
| 描述： | Connector Accessory, Cover Item, Composite, ROHS COMPLIANT |
| 文件： | 总6页 (文件大小：647K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
660-023 and -024 • 660-049 and -050
MIL-DTL-38999 Series III Type
Metal and Composite Protective Covers
Plug and Receptacle
MIL-DTL-38999 Series III Type metal and composite protective covers
AttachmentꢀDashꢀNo.ꢀ
Productꢀ
Series
Material/Finish
Lanyard
(Table IV, V, VI, or VII)
(Table II)
(Table III)
omit for “SK” slip knot attachment
660 - 023 M 17 H 5 - 01
CoverꢀType
ShellꢀSizeꢀ
AttachmentꢀLengthꢀ
(Table I)
(Inches)
3 = metal plug cover
4 = metal receptacle cover
9 = composite plug cover
0 = composite receptacle cover
-024 and -050
Receptacle Cover
MIL-DTL-38999/33
Type
-023 and -049
Plug Cover
MIL-DTL-38999/32
Type
.906
(23.0)
Max
1.18 (30.0)
Max
A Thread
Gasket
Gasket
Attachment
Attachment
ØF
ØG
Length
(see note)
Length
(see note)
Knurl or Flutes MFR Option, Typ.
A Thread
Lanyard
Lanyard
Material and Finish
Cover: See Table II • Gasket: Silicone • Hardware, Rivet: Stainless Steel/Passivate
Notes
Length tolerance for Sash Chain (S) is 1 link, for all other attachments .25.
© 2012 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR,ꢀ INC.ꢀ •ꢀ 1211ꢀ AIRꢀ WAYꢀ •ꢀ GLENDALE,ꢀ CAꢀ 91201-2497ꢀ •ꢀ 818-247-6000ꢀ •ꢀ FAXꢀ 818-500-9912
www.glenair.comꢀ
E-Mail:ꢀsales@glenair.com
B-26
660-023 and -024 • 660-049 and -050
MIL-DTL-38999 Series III Type
Metal and Composite Protective Covers
Plug and Receptacle
Available Lanyard Types (shown with optional eyelet attachment, see table III for lanyard style)
B
Bead Chain
(Type D)
Sash Chain
(Type S)
Rope
(Types F, G, H, K, R, T, U )
Table I
Shell
Size
A
Ø F
Max
Ø G
Max
Thread
09
11
.6250 - 0.1P-0.3L-TS 0.906 (23.0) .906 (23.0)
.7500 - 0.1P-0.3L-TS 1.024 (26.0) 1.102 (28.0)
13
15
17
.8750 - 0.1P-0.3L-TS
1.220 (31.0) 1.220 (31.0)
1.0000 - 0.1P-0.3L-TS 1.300 (33.0) 1.260 (32.0)
1.1875 - 0.1P-0.3L-TS 1.457 (37.0) 1.457 (37.0)
1.2500 - 0.1P-0.3L-TS 1.575 (40.0) 1.535 (39.0)
1.3750 - 0.1P-0.3L-TS 1.732 (44.0) 1.654 (42.0)
1.5000 - 0.1P-0.3L-TS 1.811 (46.0) 1.772 (45.0)
ꢀ.ꢁꢂꢃꢄ - ꢄ.ꢀP-ꢄ.ꢅL-TS 1.969 (50.0) ꢀ.ꢆꢂꢆ (ꢇꢆ.ꢄ)
19
21
23
25
Table II: Material/Finish
Code
C
Material
Finish Description
Anodize, Black
G
Anodize, Hardcoat
Electroless Nickel
Nickel-PTFE, Grey
Cadmium, Olive Drab
Zinc-Nickel, Olive Drab
Zinc-Nickel, Black
Passivate
M
Aluminum
Alloy
MT
NF
ZN
ZNU
Z1
Table III: Lanyard Codes
Stainless Steel
Composite
ZL
Electrodeposited Nickel
Electroless Nickel
Cadmium, Olive Drab
No Plating, Black
Code
Description
Bead Chain, CRES, Passivated
Wire Rope, Nylon Jacket
Nylon Rope, Black
XM
XW
XB
D
F
G
H
K
N
R
S
Refer to Appendix for material/finish details
Wire Rope, Teflon Jacket
Nylon Rope, Olive Drab
No Lanyard
Wire Rope, PVC Jacket
#8 Sash Chain, CRES, Passivated
SK Nylon Rope (Black) w/Slip Knot
T
Wire Rope, No Jacket
U
Wire Rope, Polyurethane Jacket
© 2012 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR,ꢀ INC.ꢀ •ꢀ 1211ꢀ AIRꢀ WAYꢀ •ꢀ GLENDALE,ꢀ CAꢀ 91201-2497ꢀ •ꢀ 818-247-6000ꢀ •ꢀ FAXꢀ 818-500-9912
www.glenair.comꢀ
E-Mail:ꢀsales@glenair.com
B-27
660-023 and -024 • 660-049 and -050
MIL-DTL-38999 Series III Type
Metal and Composite Protective Covers
Attachment Options
Attaching a Cover to a Jam Nut Receptacle With a Solid Ring (Style A)
under jam nut
Panel
Protective
Cover
Table IV: Solid Ring Style A
Connector
Dash
08ꢀ-ꢀ90
Shell Size
Ø N .ꢀ01
B
No.
0ꢀ6
0ꢀ7
0ꢀ8
0ꢀ9
00ꢀ
000
.896 (22.8)
1.016 (25.9)
1.141 (29.0)
1.266 (32.3)
1.391 (35.3)
1.521 (38.6)
1.641 (41.7)
1.766 (45.0)
11
13
15
17
19
21
23
25
Jam
Nut
Lanyard
attachment
point
002
003
ØN
Notes
Solid ring style A dash numbers and shell sizes shown
are for Glenair ꢀꢁꢂ-ꢂꢃꢀ fiber optic connectors only.
Consult factory for additional sizes.
Solid Ring - Style A
Attaching a Cover to a Cable Assembly With a Solid Ring (Style B)
Install ring before molding or
backshell installation
Table V: Solid Ring Style B
Dash
No.
08ꢀ-ꢀ90
Shell Size
Ø M .ꢀ1ꢁ
0ꢀ
02
01
07
.593 (15.1)
.718 (18.2)
11
13
15
17
19
21
23
25
.890 (22.6)
1.015 (25.9)
1.140 (29.0)
1.265 (32.3)
1.343 (34.0)
1.484 (37.6)
Lanyard
attachment
point
09
20
22
24
ØM
Notes
Solid ring style B dash numbers and shell sizes shown are for
Glenair ꢀꢁꢂ-ꢂꢃꢀ fiber optic connectors only.
Consult factory for additional sizes.
Solid Ring - Style B
© 2012 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR,ꢀ INC.ꢀ •ꢀ 1211ꢀ AIRꢀ WAYꢀ •ꢀ GLENDALE,ꢀ CAꢀ 91201-2497ꢀ •ꢀ 818-247-6000ꢀ •ꢀ FAXꢀ 818-500-9912
www.glenair.comꢀ
E-Mail:ꢀsales@glenair.com
B-28
660-023 and -024 • 660-049 and -050
MIL-DTL-38999 Series III Type
Metal and Composite Protective Covers
Attachment Options
Attaching a Cover to a Cable Using a Split Ring or Slip Knot
Install split ring or slip knot
over cable jacket
Table VII: Split Ring Style C
#4-40 fill.
hd. screw
B
#4-40
locknut and
split washer
Dash
No.
Dash
Ø L .ꢀ1ꢁ
Ø L .ꢀ1ꢁ
No.
1ꢀ
12
14
16
18
6ꢀ
62
64
66
68
7ꢀ
72
.425 (10.8)
.485 (12.3)
.640 (16.3)
.750 (19.1)
74
1.625 (41.4)
1.750 (44.5)
1.875 (47.8)
1.980 (50.3)
2.060 (52.3)
2.235 (56.9)
2.310 (58.7)
2.475 (63.0)
ꢄ.ꢅꢆꢆ (ꢅꢇ.ꢅ)
ꢄ.ꢁꢀꢂ (ꢇꢀ.ꢈ)
ꢉ.ꢂꢈꢆ (ꢇꢇ.ꢆ)
76
78
8ꢀ
82
84
86
88
9ꢀ
92
94
ØL
.890 (22.6)
1.015 (25.9)
1.095 (27.9)
1.130 (28.7)
1.250 (31.8)
1.350 (34.3)
1.375 (35.1)
1.485 (37.8)
Ø.050
Length
Ref
determined
Split Ring
Style C
Slip Knot
(Type SK)
at .50 dia.
Attaching a Receptacle Cover to a Panel With a Screw
Eyelet
Screw
Connector
ØK
Protective
cover
Eyelet - Style D
Table VI: Eyelet Style D
Dash No. Ø K .ꢀ1ꢁ 08ꢀ-ꢀ90 Shell Size
ꢀ0
ꢀ2
ꢀ3
ꢀ4
ꢀ1
ꢀ6
ꢀ7
ꢀ9
ꢀꢀ
.140 (3.56)
.182 (4.62)
.191 (4.85)
.197 (5.00)
.167 (4.24)
.125 (31.8)
.218 (5.53)
.156 (3.96)
No Eyelet
Eyelet
Screw
Connector
11 thru 21
ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ
Protective
cover
23 thru 25
© 2012 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR,ꢀ INC.ꢀ •ꢀ 1211ꢀ AIRꢀ WAYꢀ •ꢀ GLENDALE,ꢀ CAꢀ 91201-2497ꢀ •ꢀ 818-247-6000ꢀ •ꢀ FAXꢀ 818-500-9912
www.glenair.comꢀ
E-Mail:ꢀsales@glenair.com
B-29
Reference Information
Standard Materials and Finishes
TABLE II - STANDARD FINISHES
GLENAIR
SYMBOL
M85049 SYMBOL
REFERENCEONLY FINISH
SPECIFICATION(S)
A
B
Cadmium Plate, Bright
AMS-QQ-P-416, Type I, Class 2
AMS-QQ-P-416, Type II, Class 3
AMS-A-8625, Type II, Class 2
AMS-A-8625, Type III, Class 1
Cadmium Plate, Olive Drab
Anodize, Black
C*
G*
J
A
Hard Coat, Anodic
Iridite, Gold Over Cadmium Plate Over MIL-C-5541, Class 3AMS-QQ-P-416, Type II,
Electroless Nickel
Class 3 over AMS-C-26074, Class 4, Grade B
Cadmium Plate, Bright Over
Electroless Nickel
1000 Hour Corrosion Resistance
LF
Electroless Nickel
AMS-C-26074, Class 4, Grade B
M
N
N
Cadmium Plate, Olive Drab Over
Electroless Nickel
AMS-QQ-P-416, Type II, Class 3 over Electroless Nickel
AMS-C-26074
Zinc Cobalt, Dark Olive Drab
96 Hour Corrosion Resistance
NC
NF
Cadmium Plate, Olive Drab Over
Electroless Nickel
1000 Hour Corrosion Resistance
W
Cadmium Plate, Bright Over
Electroless Nickel
AMS-QQ-P-416, Type I, Class 3
ASTMB 733-90, SC2, Type I, Class 5, MIL-C-26074***
T
Cadmium Plate, Black
AMS-QQ-P-416, Type II, Class 3
AMS-QQ-P-416, Type II, Class 3
U
Cadmium Plate, Black
ZU**
ZN
Zinc-Nickel Alloy, Olive Drab
ASTMB 841-91, Over Electroless Nickel 1000 Hour Salt
Spray
*
Anodize finish; not suitable for EMI Shielding or grounding applications.
** Applicable to corrosion resisting steel backshells and accessories. Consult factory for other available finishes.
The following standard materials are used for the majority of Glenair
backshells and connector accessories. However, backshell compo-
nents are not limited to those items listed, but are representative of
the elements used in Glenair's general accessory products. Contact
Glenair for applicable specifications on items not listed below.
STANDARDMATERIALS-BACKSHELLSANDACCESSORIES
MATERIAL
SPECIFICATION
AMS-QQ-A-200
ASTMB221, 209
COMPONENT
Aluminum
Machined components: such as backshell bodies, fabricated elbows, protective covers,
rotatable couplers, dummy stowage receptacles, lock nuts, G-spring support rings,
EMI ground rings, grommet followers, etc.
Aluminum
QQ-A-591
ASTMB85, 26
Die cast components: such as angular backshells, strain relief backshells, strain relief
bodies, strain relief saddles, special EMI ground rings, etc.
Backshells or strain reliefs: available in optional corrosion resisting steel; and
hardware: such as screws, washers, rivets, wire rope, sash chain, band straps, etc.
Elastomeric seals: such as O-rings, cable jacket seals, grommets, etc.
Anti-friction and thrust washers
Corrosion Resisting Steel ASTMA582 (300 Series)
AMS-QQ-S-763
Silicone
Teflon
Corrosion Resistant
Material
ZZ-R-765, MIL-R-25988
TFE
N/A
Anti-rotation device
BODY STRAP
NOTES
On all length callouts, tolerance is ± .060 unless otherwise
specified.
Glenair offers an optional stainless steel body strap for
attaching protective covers as illustrated. To specify body
strap, add suffix letter C to the end of the part number. For
example 360AS001M1610M6C.
Unless otherwise specified, the following other dimensional
tolerances will apply:
.xx = ± .03 (0.8)
.xxx = ± .015 (0.4)
Lengths = ± .060 (1.52)
Angles = ± 5°
Metric dimensions (mm) are indicated in parentheses
NOTE: For your convenience these tables have
been reproduced inside the back cover fold-out.
2-56 Screw and Nut
© 2005 Glenair, Inc.
CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-Mail: sales@glenair.com
14
Glenair Backshell and Accessory Material and Finish Options
Backshell and accessory base materials, plating options, specifications and codes
Hrs. Salt
Spray
Electrical
Conductivity
Operating Temp.
Range
RoHS
Code
Material
Finish
Finish Specification
Notes
A
AB
AL
B
C
E
Aluminum
Marine Bronze
Aluminum
Aluminum
Aluminum
Aluminum
Aluminum
Aluminum
Aluminum
Aluminum
Aluminum
Aluminum
Aluminum
Aluminum
Aluminum
Stainless Steel
Aluminum
Titanium
Cadmium, No Chromate
Unplated
AlumiPlate, Clear Chromate
Cadmium, Olive Drab
Anodize, Black
Chem Film
Anodize, Hardcoat
Cadmium, Gold
Cadmium, Gold
Cadmium, Clear
Electroless Nickel
Nickel-PTFE
Cadmium, Olive Drab
Zinc-Cobalt, Olive Drab
Cadmium, Olive Drab
Electrodeposited Nickel
Cadmium, No Chromate
Electrodeposited Nickel
Cadmium, Black
Zinc-Cobalt, Black
Zinc-Cobalt, Black
Cadmium, Black
AlumiPlate
Unplated Black
Electroless Nickel
Nickel-PTFE
Unplated Light Brown
Cadmium, Olive Drab
Zinc-Nickel, Black
Passivate
SAE-AMS-QQ-P-416 Type I Class 3
48
1000
1000
96
336
168
Conductive
Conductive
Conductive
Conductive
Non-Conductive
Conductive
Non-Conductive
Conductive
Conductive
Conductive
Conductive
Conductive
Conductive
Conductive
Conductive
Conductive
Conductive
Conductive
Conductive
Conductive
Conductive
Conductive
Conductive
Non-Conductive
Conductive
Conductive
Non-Conductive
Conductive
Conductive
Conductive
Conductive
Conductive
Conductive
Conductive
Conductive
Conductive
Conductive
Conductive
Conductive
Conductive
Conductive
-65 to +175°C
-65 to +200°C
-65 to +175°C
-65 to +175°C
-65 to +175°C
-65 to +175°C
-65 to +200°C
-65 to +175°C
-65 to +175°C
-65 to +175°C
-65 to +200°C
-65 to +175°C
-65 to +175°C
-65 to +175°C
-65 to +175°C
-65 to +200°C
-65 to +175°C
-65 to +200°C
-65 to +175°C
-65 to +175°C
-65 to +175°C
-65 to +175°C
-65 to +175°C
-65 to +175°C
-65 to +175°C
-65 to +175°C
-65 to +175°C
-65 to +175°C
-65 to +175°C
-65 to +200°C
-65 to +200°C
-65 to +175°C
-65 to +175°C
-65 to +200°C
-65 to +200°C
-65 to +175°C
-65 to +175°C
-65 to +175°C
-65 to +175°C
-65 to +175°C
-65 to +175°C
Not recommended for new projects. LF is preferred.
Marine and geophysical applications.
Approved for MIL-DTL-38999L and MIL-DTL-83513G.
Not recommended for new projects. NF is preferred.
Glenair’s standard black anodize finish.
Glenair’s standard chem film finish.
Glenair’s preferred hardcoat finish.
Not recommended for new projects. JF is preferred.
Glenair’s preferred gold cadmium finish.
Glenair’s preferred clear cadmium finish.
Glenair’s standard electroless nickel finish.
Approved for MIL-DTL-38999L and MIL-DTL-83513G.
Not recommended for new projects. NF is preferred.
Glenair’s standard olive drab zinc-cobalt finish.
Glenair’s standard olive drab cadmium finish.
Use ZM for electroless nickel alternative.
Not recommended for new projects. LF is preferred.
Glenair’s preferred finish for titanium connectors.
Not recommended for new projects. UF is preferred.
Glenair’s standard black zinc-cobalt finish.
RoHS version of UC.
Glenair’s preferred black cadmium finish.
Approved for MIL-DTL-38999L.
Glenair’s standard unplated composite.
Glenair’s standard electroless nickel finish over composite.
Approved for MIL-DTL-38999L.
Not recommended for new projects. Use XB.
Glenair’s standard olive drab cadmium finish over composite.
Glenair’s standard black zinc-nickel finish over composite.
Glenair’s standard passivated stainless steel.
Glenair’s standard gold plating for space programs.
Glenair’s standard zinc-cobalt over stainless steel.
RoHS version of ZC.
Used on hermetic connectors. Use ZM for other applications.
Glenair’s preferred nickel-plated stainless steel.
Glenair’s new 1000 Hour Grey over stainless steel.
Glenair’s standard olive drab zinc-nickel finish.
Glenair’s standard black zinc-nickel finish.
Glenair’s RoHs compliant black zinc-nickel.
Glenair’s standard black cadmium over stainless steel.
Glenair’s standard olive drab cadmium over stainless steel.
MIL-DTL-83488, Class 2, Type II over electroless nickel
SAE-AMS-QQ-P-416 Type II Class 3
AMS-A-8625 Type II Class 2
MIL-DTL-5541 Type 1 Class 3
AMS-A-8625 Type III, Class 1, .001" thick
SAE-AMS-QQ-P-416 Type II, Class 2 over electroless nickel
SAE-AMS-QQ-P-416 Type II, Class 2 over electroless nickel
SAE-AMS-QQ-P-416 Type II Class 2 over electroless nickel
AMS-C-26074 Class 4 Grade B; ASTM-B-733, SC 2, Type IV
GMF-002 Type II Class 1
SAE-AMS-QQ-P-416 Type II Class 3 over electroless nickel
ASTM B 840 Grade 6 Type D over electroless nickel
SAE-AMS-QQ-P-416 Type II Class 2 over electroless nickel
SAE-AMS-QQ-N-290 Class 1 Grade F
SAE-AMS-QQ-P-416 Type I Class 3
SAE-AMS-QQ-N-290 Class 1 Grade F
SAE-AMS-QQ-P-416 Type I Class 3
ASTM B 840 Grade 6 Type D over electroless nickel
ASTM B 840 Grade 6 Type D over electroless nickel
SAE-AMS-QQ-P-416 Type II Class 2 over electroless nickel
MIL-DTL-86448, Class 2, Type II over electroless nickel
G
J
336
500
JF
LF
M
MT
N
NC
NF
P
1000
1000
48
1000
500
350
1000
500
48
96
48
350
T
TP2
U
Aluminum
Aluminum
UC
UCR Aluminum
350
UF
XAL
XB
Aluminum
Composite
Composite
Composite
1000
2000
2000
2000
2000
2000
2000
2000
1000
48
XM
AMS-C-26074
GMS-002 Class 2 Type II
XMT Composite
XO
XW
XZN Composite
Z1
Z2
ZC
ZCR
ZL
Composite
Composite
SAE-AMS-QQ-P-416 Type II Class 3 over electroless nickel
ASTM B841 Grade 5 over electroless nickel
SAE-AMS-SAE-AMS-QQ-P-35 Type VI
MIL-DTL-45204 Class 1 over electroless nickel
ASTM-B840, Grade 6
ASTM-B840, Grade 6
SAE-AMS-QQ-N-290 Class 1 Grade F
AMS-C-26074 Class 1 Grade A
Stainless Steel
Aluminum
Stainless Steel
Stainless Steel
Stainless Steel
Stainless Steel
Gold
Zinc-Cobalt, Black
Zinc-Cobalt, Black
Electrodeposited Nickel
Electroless Nickel
Nickel-PTFE
Zinc-Nickel, Olive Drab
Zinc-Nickel, Black
Zinc-Nickel, Black
Cadmium, Black
Cadmium, Olive Drab
1000
ZM
ZMT Stainless Steel
ZN Aluminum
ZNU Aluminum
ZR
ZU
ZW
GMF-002 Type II Class 3
1000
1000
1000
500
1000
2000
ASTM B841 Grade 5 over electroless nickel
ASTM B841 Grade 5 over electroless nickel
ASTM B841 Grade 5 over electroless nickel
SAE-AMS-QQ-P-416 Type II Class 3
Aluminum
Stainless Steel
Stainless Steel
SAE-AMS-QQ-P-416 Type II Class 2 over electroless nickel
相关型号：
©2020 ICPDF网 联系我们和版权申明