804-013CPHAAMP-72 [GLENAIR]
Interconnection Device;型号: | 804-013CPHAAMP-72 |
厂家: | Glenair |
描述: | Interconnection Device 连接器 |
文件: | 总3页 (文件大小:174K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Series 80 “Mighty Mouse”
ASAP Cordsets For Ethernet, IEEE 1394 and USB 2.0
ASAP Cordsets For High Speed Serial Data
A
B
C
D
E
F
Upgrade commercial high speed
serial interconnects to mil-spec
performance. Glenair’s ASAP “Mighty
Mouse” cordsets are available for
100BASE-T, Gigabit Ethernet, IEE
1394 and USB 2.0 applications.
These cordsets combine aerospace-
grade data cables with Series 80
“Mighty Mouse” harsh environment
connectors for maximum
FEP jackets meet FAA
flammability requirements. Or,
choose low smoke / zero halogen
polyurethane jackets for mass
transit or shipboard applications.
Three strain relief options –
Standard overmolded cables offer
excellent strain-relief and cable
sealing.Or, choose heatshrink boots
for smallest form factor. If repairability
and ruggedness are important, choose
machined aluminum EMI backshells.
performance and minimum size.
100BASE-T Cordset
with 4 Pin Series 800 Connector
HOW TO ORDER CORDSETS
Step 1: Select the Connector Series
Table1 lists the five types of Series 80 connectors. For more information on
selecting a connector, please refer to the connector selection chart on the following
page. This section does not contain ordering information for series 802 “Aqua
Mouse” cordsets. Please contact Glenair for information on hazardous environment
high pressure cables for the 802 Series.
G
H
J
Step 2: Select the Cable
Table 2 contains specifications for standard data cables. The cable type also
determines the connector layout. 4 pin connectors are used for 4 wire cables,
and 10 pin connectors are used for 8 wire cables.
Step 3: Select a Cable Jacket
Table 3 shows available jacket options. Choose FEP flourocarbon jackets
for airframe and avionics applications, or choose low smoke/zero halogen
polyurethane jackets for soldier systems, vehicles, and transit systems.
K
L
Step 4: Select a Cable-To-Connector Interface
Table 3 provides three ways to attach the cable to the connector:
1. Polyamide boot, overmolded with flexible strain relief
2. Aluminum backshell, shielded, watertight and removable
3. Heat-shrink boot, low smoke/ zero halogen
Step 5: Select a Connector Configuration
Table 1 shows connector codes for specifying plug versus receptacle and pin
versus socket contacts. Add a plating code, keying option and length.
M
© 2006 Glenair, Inc.
CAGE Code 06324/0CA77
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-Mail: sales@glenair.com
K-1
Rev. 05-APR-2007
Series 80 “Mighty Mouse”
ASAP Cordsets For Ethernet, IEEE 1394 and USB 2.0
Series 800
Series 801
Series 803
Series 804
Series 805
A
B
C
D
E
F
Original “Mighty
Mouse” with UNF
Threads
Triple-Start ACME
Description
Notes
Double-Start ACME
¼ Turn Bayonet
Push-Pull
A general purpose
connector for
Ethernet switches,
tactical equipment
and instrumentation. slightly larger than
Series 800.
More rugged
Quick-mating,
Breakaway connector “Clicker” ratchet
keys and threads
compared to Series
800. Faster mating,
light duty, general
purpose. Not rated
for immersion. 50
milliohms shell-to-
shell resistance.
for headsets and
tactical equipment.
Gold-plated spring
for long mating life
and superior EMI
shielding.
mechanism and
ground spring for
military airframes
and avionics boxes.
Fast-mating, D38999
equivalent.
Number of
Contacts
3 to 37
3 to 85
3 to 85
3 to 85
4 to 85
Threaded Coupling with Threaded Coupling with
Push-to-Mate, ¼ Turn
to Lock
Quick-Disconnect with
Canted Spring
One Full Turn for Full
Mate
Coupling
G
H
J
4 ½ Turns to Full Mate
1 ½ Turns to Full Mate
MIL-STD-810 Method
512
MIL-STD-810 Method
512
MIL-STD-810 Method
512
1 Meter for 1 Hour
MIL-STD-810 Method
512
1 Meter for 1 Hour
Water
Splashproof
Fair
Immersion
1 Meter for 1 Hour
1 Meter for 1 Hour
Good
Good
Very Good
Excellent
EMI Shielding
37 g's Random Vibration 37 g's Random Vibration 37 g's Random Vibration 37 g's Random Vibration 37 g's Random Vibration
Vibration and
Shock
300 g's Shock
300 g's Shock
300 g's Shock
300 g's Shock
300 g's Shock
250 Cycles Aluminum
2000 Cycles SST
Mating
Cycles
2000 Cycles
2000 Cycles
2000 Cycles
2000 Cycles
K
L
#12: 23 AMP, 500 VAC
#16: 13 AMP, 500 VAC
#23: 5 AMP, 500 VAC
#12: 23 AMP, 500 VAC
#16: 13 AMP, 500 VAC
#23: 5 AMP, 500 VAC
#12: 23 AMP, 500 VAC
#16: 13 AMP, 500 VAC
#23: 5 AMP, 500 VAC
#12: 23 AMP, 500 VAC
#16: 13 AMP, 500 VAC
#23: 5 AMP, 500 VAC
#12: 23 AMP, 500 VAC
#16: 13 AMP, 500 VAC
#23: 5 AMP, 500 VAC
Electrical
Performance
Commercial air
frame sensors; UAV
telemetry; Tactical
computers; field
radios;
Military air frame;
Dismounted soldier;
Tactical ground
weaponry; Avionic
(FLIR) system
Soldier system
radios; Autosport
diagnostics; Airborne battery; Missile
surveillance applications; Weapon
interconnect
Helmet breakaway
connector; QDC
Autosport; Military air
frame; Joint Strike
Fighter
Proven
Performance
Applications
M
© 2006 Glenair, Inc.
CAGE Code 06324/0CA77
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-Mail: sales@glenair.com
K-2
Rev. 05-APR-2007
Series 80 “Mighty Mouse”
ASAP Cordsets For Ethernet, IEEE 1394 and USB 2.0
TABLE 1: HOW TO ORDER SERIES 80 CORDSETS FOR HIGH SPEED DATA
Sample Part Number
A
B
C
D
E
F
801-024
B
F
P
A
C
M
P
Z
-72
Connector Connector
Shell
Connector
Series
Cable
Jacket
Strain
Relief
End A
P1
End B
P2
Material / Protective Shell Pol. OAL
Finish
Cable
Cover
Pos.
Length
Polarizing
position
depends
on the
connector
series.
800-035
Series 800
A
F
P
A
A
M
P
Overall
Length
In
100BASE-T
Ethernet 4
Cond. UTP,
OAL Shield
4 Pin
FEP
Polyamide
Plug, with
Male Pin
Contacts
Plug, with
Male Pin
Contacts
Aluminum /
Electroless
Nickel
Metal
Cordset, UNF
Threaded
Flourocarbon Overmold
Jacket,
Protective
Covers
Included
Inches
Coupling, Hex Nut
Translucent
B
Blue
12 Inch
Min.
Metal
B
B
NF
Connector
Backshell
Plug, with
Female
Socket
Plug, with
Female
Socket
Aluminum /
N
801-024
Series 801
Cordset, Double-
Start Threaded
Coupling
P
Cadmium with No Covers
For Series
800 and 803:
B
Low Smoke/
H
Olive Drab
Chromate
Supplied
100BASE-T
Zero Halogen
Contacts
Contacts
Heat-Shrink
Ethernet Quad, Polyurethane
OAL Shield, 4 Jacket, Black
Pin Connector
N
Boot, Low
Smoke/
Zero
Normal
C
C
Receptacle,
Receptacle,
X
ZN
803-007
Series 803
Cordset, Push-
Pull With Bayonet
Lock Coupling
Pos. X
Halogen
with Male Pin with Male Pin
Aluminum
/ Zinc-
C
Contacts
Contacts
Y
1000BASE-
T Gigabit
Pos. Y
Nickel with
Olive Drab
Chromate
D
D
Z
Ethernet 8
Pos. Z
Receptacle, Receptacle,
with Female with Female
Cond. UTP,
OAL Shield, 10
Pin Connector
804-013
Series 804
Cordset, Quick-
Disconnect Push-
Pull
Socket
Contacts
Socket
Contacts
For Series
801 and 805:
ZNU
Aluminum /
Zinc-Nickel
with Black
Chromate
G
H
J
D
A
IEEE 1394
N
Normal
Hi-Speed Quad
110 Ohm, 4 Pin
Connector
No
B
805-007
Series 805
Cordset, Tri-
Start Threaded
Coupling with
Ratchet and
Ground Spring
Connector
(Single-
Ended)
Pos. B
C
Z1
Pos. C
E
Stainless
Steel /
D
USB 2.0, Two
#22 Power,
One STP #26
Pos. D
Passivated
For Series
804:
Omit
for Single
Master Key
F
Two STP, 100
Ohm, OAL
Shield, 4 Pin
Connector
K
L
A
G
Normal
Four STP, 100
Ohm, OAL
Shield, 10 Pin
Connector
B
Pos. B
C
Pos. C
D
Pos. D
M
© 2006 Glenair, Inc.
CAGE Code 06324/0CA77
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-Mail: sales@glenair.com
K-3
Rev. 05-APR-2007
相关型号:
©2020 ICPDF网 联系我们和版权申明