G2002 [GMT]

51CH serial input motor driver IC for DSC;
G2002
型号: G2002
厂家: GLOBAL MIXED-MODE TECHNOLOGY INC    GLOBAL MIXED-MODE TECHNOLOGY INC
描述:

51CH serial input motor driver IC for DSC

文件: 总1页 (文件大小:61K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
G2002/G2002B  
Global Mixed-mode Technology  
5+1CH serial input motor driver IC for DSC  
Features  
General Description  
„ Build-in one micro-steps drive mode is possible  
from 2-2 phase stepper drive to maximum 256  
resolution micro-steps.  
„ Built in 2 full-swing/constant voltage drivers  
switched by serial control with brake function  
„ Built in 1 constant current drivers for shutter or  
IRIS  
„ Low on-resistance (1.2Ω, sum of on-resistance of  
upside and bottom side)  
„ Output currentIOUT<=0.8A(max.) for each channel  
G2002/G2002B is a 5+1-channel H-Bridge motor  
drivers IC for the digital camera and so on. It has one  
micro-stepping driver, two full-swing/constant voltage  
drivers and one full-swing/constant current drivers. G2002  
/G2002B can be operated in serial control mode or  
partial exterior control mode. When operating in partial  
exterior control mode, the mode of each CH is fixed by  
initial serial control setting. When operating in serial  
control mode, the mode of each driver can be setting  
by serial control.  
„ Build-in thermal shutdown (TSD, 150°C)  
„ All power supply systems (VCC, VM12, VM3,  
VM45) can be set up with an independent power  
supply  
„ Power save mode corresponds by serial control  
setup  
„ PI (photo interrupter drive) 3 channel built-in.  
„ Small 28TQFN (4×4mm) is adopted  
„ Build-in POR (power on reset).  
Ordering Information  
ORDER  
NUMBER  
TEMP.  
RANGE  
PACKAGE  
(Green)  
MARKING  
G2002RV1U  
2002  
-20°C to +85°C TQFN4X4-28  
-20°C to +85°C TQFN4X4-28  
G2002BRV1U  
2002B  
Applications  
„ Stepping motor driver/ DC motor driver motor  
driver for DSC  
Note: RV: TQFN4X4-28  
1: Bonding Code  
U: Tape & Reel  
Pin Configurations  
RNF5  
OUT5B  
VM45  
OUT4A  
P13  
21  
20  
19  
18  
17  
1
2
OUT1A  
OUT1B  
3
4
CH12:Micro_stepping  
VM12  
Thermal  
Pad  
(PGND12,PGND3)  
OUT2A  
CH3 :CV/FS  
CH4 :CV/FS  
CH5 :CC only  
OUT2B  
5
16  
15  
OUT4B  
P11  
OUT3A  
OUT3B  
6
7
G2002/G2002B TQFN4X4-28  
Note: Recommend connecting the Thermal Pad to  
the Ground for excellent power dissipation.  
Ver: 0.6  
May 08, 2012  
TEL: 886-3-5788833  
http://www.gmt.com.tw  
1

相关型号:

G2003

120mA, Current Sinking, 10-bit I2C DAC for VCM Driver
GMT

G2004

Constant current type 1-CH H-bridge driver IC
GMT

G20040A1

Narrow Band High Power Amplifier, 935MHz Min, 960MHz Max,
SPECTRUM

G20046A1

Narrow Band High Power Amplifier, 935MHz Min, 960MHz Max,
SPECTRUM

G20047A1

Narrow Band High Power Amplifier, 935MHz Min, 960MHz Max,
SPECTRUM

G20048A1

Narrow Band High Power Amplifier, 935MHz Min, 960MHz Max,
SPECTRUM

G2005

51CH serial input motor driver IC for DSC
GMT

G2005601

Narrow Band High Power Amplifier, 935MHz Min, 960MHz Max,
SPECTRUM

G2006

Low-saturation, Low-voltage 1 channels Bi-directional Motor Driver
GMT

G2007

6CH serial input motor driver IC for DSC
GMT

G2008

42 CH serial input motor driver IC for DSC
GMT

G2009

42CH serial input motor driver IC for DSC
GMT