A1_15 [GOOD-ARK]
Surface Mount Glass Passivated Standard Rectifier Reverse Voltage 50~1000V Forward Current 1A;
| 型号： | A1_15 |
| 厂家： | 
GOOD-ARK ELECTRONICS |
| 描述： | Surface Mount Glass Passivated Standard Rectifier Reverse Voltage 50~1000V Forward Current 1A |
| 文件： | 总4页 (文件大小：210K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
A1 thru A7
Surface Mount Glass Passivated Standard Rectifier
Reverse Voltage 50~1000V Forward Current 1A
Features
• Glass passivated Standard Rectifiers
• Very low profile - typical height of 1.0 mm
• Low forward voltage drop
• Low leakage current
• Moisture sensitivity: level 1, per J-STD-020
• AEC-Q101 qualified
• High temperature soldering guaranteed: 260℃/10 seconds
• Halogen-free according to IEC 61249-2-21 definition
eSGA
(SOD‐123FL)
Typical Applications
For use of general purpose rectification in lighting, cellular phone, portable device,
power supplies and other consumer applications.
Maximum Ratings (TA = 25 °C unless otherwise noted)
A1
A2
A3
A4
A5
A6
A7
Unit
Parameter
Symbol
Maximum repetitive peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
50
35
50
100
70
200
140
200
400
280
400
1.0
600
420
600
800
560
800
1000
700
V
V
V
A
VRRM
VRMS
VDC
100
1000
Maximum average forward rectified current
IF(AV)
Peak forward surge current 8.3 ms single
half sine-wave superimposed on rated load
40
A
IFSM
Operating junction and storage temperature
range
TJ,
TSTG
- 55 to + 150
°C
Electrical Characteristics (TA = 25 °C unless otherwise noted)
A1
A2
A3
A4
A5
A6
A7
Unit
Parameter
Test Conditions Symbol
Maximum
1.0
VF
Volts
instantaneous forward 1 A
voltage
TA=25℃
Maximum DC reverse
current at rated DC
blocking voltage
5
IR
µA
TA=125℃
50
IF=0.5A,IR=1.0A,
Irr=0.25A
Typical reverse
recovery time
trr
1.8
6
uS
pF
Typical junction
capacitance
CJ
4.0 V, 1 MHz
70
40
5
juntion to ambient
juntion to case
juntion to mount
RθJA
RθJC
RθJM
Typical thermal
resistance1)
℃/W
Note 1),The thermal resistance from junction to ambient,case or mount,mounted on P.C.B with 5×5mm copper pads,2 OZ,FR4 PCB
www.goodark.com
1/4
2014.03-Rev.A
A1 thru A7
Surface Mount Glass Passivated Standard Rectifier
Reverse Voltage 50~1000V Forward Current 1A
Package Outline Dimensions
in inches (millimeters)
Figure 2.Maximum Non‐Repetitive
Peak Forward Surge Current
Figure 1.Forward Current Derating Curve
Figure 3. Typical Reverse Characteristics
Figure 4. Typical Junction Capacitance
Figure 5. Typical Instantaneous Forward Characteristics
www.goodark.com
2/4
2014.03-Rev.A
A1 thru A7
Surface Mount Glass Passivated Standard Rectifier
Reverse Voltage 50~1000V Forward Current 1A
Package Outline Dimensions
in inches (millimeters)
DIM
Unit: mm
Unit: inch
MIN
MIN
0.9
0
MAX
1.08
0.1
MAX
0.043
0.004
0.041
0.010
0.079
0.122
0.033
0.154
A
A1
B
C
D
E
L
HE
0.035
0.000
0.033
0.004
0.067
0.114
0.017
0.138
0.85
0.1
1.7
2.9
0.43
3.5
1.05
0.25
2
3.1
0.83
3.9
Soldering footprint
Packing Information
Packing quantities:
3000 pcs/Reel, 40 Reels/Box; 8mm Tape, 7" Reel
Tape & Reel Specification
www.goodark.com
3/4
2014.03-Rev.A
A1 thru A7
Surface Mount Glass Passivated Standard Rectifier
Reverse Voltage 50~1000V Forward Current 1A
Disclaimers
These materials are intended as a reference to assist our customers in the selection of the
Suzhou Good-Ark product best suited to the customer’s application; they do not convey
any license under any intellectual property rights, or any other rights, belonging to Suzhou
Good-Ark Electronics Co., Ltd.or a third party.
Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, or
infringement of any third-party ’ s rights, originating in the use of any product data,
diagrams, charts, programs, algorithms, or circuit application examples contained in these
materials.
All information contained in these materials, including product data, diagrams, charts,
programs and algorithms represents information on products at the time of publication of
these materials, and are subject to change by Suzhou Good-Ark Electronics Co., Ltd.
without notice due to product improvements or other reasons. It is therefore recommended
that customers contact Suzhou Good-Ark Electronics Co., Ltd. or an authorized Suzhou
Good-Ark Electronics Co., Ltd. for the latest product information before purchasing a
product listed herein. The information described here may contain technical inaccuracies
or typographical errors. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility
for any damage, liability, or other loss rising from these inaccuracies or errors. Please also
pay attention to information published by Suzhou Good-Ark Electronics Co., Ltd. by
various means, including our website home page.
(http://www.goodark.com)
When using any or all of the information contained in these materials, including product
data, diagrams, charts, programs, and algorithms, Please be sure to evaluate all
information as a total system before making a final decision on the applicability of the
information and products. Suzhou Good-Ark Electronics Co., Ltd. assumes no
responsibility for any damage, liability or other loss resulting from the information contained
herein.
The prior written approval of Suzhou Good-Ark Electronics Co., Ltd. is necessary to reprint
or reproduce in whole or in part these materials.
Please contact Suzhou Good-Ark Electronics Co., Ltd. or an authorized distributor for
further details on these materials or the products contained herein.
www.goodark.com
4/4
2014.03-Rev.A
相关型号：
A2-10PA-2.54DSA(71)
Board Connector, 10 Contact(s), 1 Row(s), Male, Straight, 0.1 inch Pitch, Solder Terminal, Locking, Black Insulator, ROHS COMPLIANT
HRS
A2-11PA-2.54DS(71)
Board Connector, 11 Contact(s), 1 Row(s), Male, Right Angle, Solder Terminal, ROHS COMPLIANT
HRS
A2-12PA-2.54DS(71)
Board Connector, 12 Contact(s), 1 Row(s), Male, Right Angle, Solder Terminal, ROHS COMPLIANT
HRS
A2-12PA-2.54DSA(71)
Board Connector, 12 Contact(s), 1 Row(s), Male, Straight, 0.1 inch Pitch, Solder Terminal, Locking, Black Insulator, ROHS COMPLIANT
HRS
©2020 ICPDF网 联系我们和版权申明