FF3 [GOOD-ARK]

Surface Mount Glass Passivated Fast Recovery Rectifier;
FF3
型号: FF3
厂家: GOOD-ARK ELECTRONICS    GOOD-ARK ELECTRONICS
描述:

Surface Mount Glass Passivated Fast Recovery Rectifier

文件: 总4页 (文件大小:192K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
FF1 thru FF7  
Surface Mount Glass Passivated Fast Recovery Rectifier  
Reverse Voltage 50~1000V Forward Current 1A  
Features  
• Glass passivated Fast Recovery rectifiers  
• Very low profile - typical height of 1.0 mm  
• Low forward voltage drop  
• Low leakage current  
eSGA  
(SOD123FL)  
• Moisture sensitivity: level 1, per J-STD-020  
• AEC-Q101 qualified  
• High temperature soldering guaranteed: 260/10 seconds  
• Halogen-free according to IEC 61249-2-21 definition  
Typical Applications  
For use of general purpose rectification in lighting, cellular phone, portable device,  
power supplies and other consumer applications.  
Maximum Ratings (TA = 25 °C unless otherwise noted)  
FF1  
FF2  
FF3  
FF4  
FF5  
FF6  
FF7  
Unit  
Parameter  
Symbol  
Maximum repetitive peak reverse voltage  
Maximum RMS voltage  
Maximum DC blocking voltage  
50  
35  
50  
100  
70  
200  
140  
200  
400  
280  
400  
1.0  
600  
420  
600  
800  
560  
800  
1000  
700  
V
V
V
A
VRRM  
VRMS  
VDC  
100  
1000  
Maximum average forward rectified current  
IF(AV)  
Peak forward surge current 8.3 ms single half sine-  
wave superimposed on rated load  
30  
A
IFSM  
- 55 to + 150  
Operating junction and storage temperature range  
°C  
TJ, TSTG  
Electrical Characteristics (TA = 25 °C unless otherwise noted)  
FF1  
FF2  
FF3  
FF4  
FF5  
FF6  
FF7  
Unit  
Volts  
µA  
Parameter  
Test Conditions  
Symbol  
Maximum instantaneous forward  
voltage  
1.3  
VF  
IR  
1 A  
5
TA=25℃  
TA=125℃  
Maximum DC reverse current at  
rated DC blocking voltage  
50  
IF=0.5A,IR=1.0A,  
trr  
150  
250  
500  
nS  
pF  
Maximum reverse recovery time  
Typical junction capacitance  
Irr=0.25A  
8.2  
76  
42  
7
CJ  
4.0 V, 1 MHz  
juntion to ambient  
juntion to case  
juntion to mount  
RθJA  
RθJC  
RθJM  
Typical thermal resistance1)  
℃/W  
Note:1),The thermal resistance from junction to ambient,case or mount,mounted on P.C.B with 5×5mm copper pads,2 OZ,FR4 PCB  
www.goodark.com  
1/4  
2014.02-Rev.A  
FF1 thru FF7  
Surface Mount Glass Passivated Fast Recovery Rectifier  
Reverse Voltage 50~1000V Forward Current 1A  
Ratings and Characteristics Curves  
(TA = 25unless otherwise noted)  
1.2  
30  
25  
20  
15  
10  
5
1
0.8  
0.6  
0.4  
0.2  
0
0
0
25 50 75 100 125 150  
Lead temperature(℃)  
1
10  
Number of Cycles at 60Hz  
100  
Figure 2.Maximum NonRepetitive Peak  
Forward Surge Current  
Figure 1.Forward Current Derating Curve  
100000  
100  
10  
1
25
 
10000  
1000  
100  
10  
1
0.1  
0.01  
0.001  
75℃  
125℃  
150℃  
Tj=25℃  
f=1.0MHZ  
Vsig=50mVpp  
0.01  
0.1  
1
10  
0
20 40 60 80 100 120  
Percent of Rated Peak Reverse Voltage  
(%)  
Reverse Voltage (V)  
Figure 3. Typical Reverse Characteristics  
Figure 4. Typical Junction Capacitance  
10  
1
25℃  
75℃  
125℃  
150℃  
0.1  
0.01  
0
0.4 0.8 1.2 1.6  
2
Instantaneous Forward Voltage (V)  
Figure 5. Typical Instantaneous Forward Characteristics  
www.goodark.com  
2/4  
2014.02-Rev.A  
FF1 thru FF7  
Surface Mount Glass Passivated Fast Recovery Rectifier  
Reverse Voltage 50~1000V Forward Current 1A  
Package Outline Dimensions  
DIM  
Unit: mm  
Unit: inch  
MIN  
MIN  
0.9  
0
MAX  
1.08  
0.1  
MAX  
0.043  
0.004  
0.041  
0.010  
0.079  
0.122  
0.033  
0.154  
A
A1  
B
C
D
E
L
HE  
0.035  
0.000  
0.033  
0.004  
0.067  
0.114  
0.017  
0.138  
0.85  
0.1  
1.7  
2.9  
0.43  
3.5  
1.05  
0.25  
2
3.1  
0.83  
3.9  
Soldering footprint  
Packing Information  
Packing quantities:  
3000 pcs/Reel, 40 Reels/Box; 8mm Tape, 7" Reel  
Tape & Reel Specification  
www.goodark.com  
3/4  
2014.02-Rev.A  
FF1 thru FF7  
Surface Mount Glass Passivated Fast Recovery Rectifier  
Reverse Voltage 50~1000V Forward Current 1A  
Disclaimers  
These materials are intended as a reference to assist our customers in the selection of the Suzhou Good-Ark  
product best suited to the customer’s application; they do not convey any license under any intellectual property  
rights, or any other rights, belonging to Suzhou Good-Ark Electronics Co., Ltd.or a third party.  
Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, or infringement of any third-  
party’ s rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit  
application examples contained in these materials.  
All information contained in these materials, including product data, diagrams, charts, programs and algorithms  
represents information on products at the time of publication of these materials, and are subject to change by  
Suzhou Good-Ark Electronics Co., Ltd. without notice due to product improvements or other reasons. It is  
therefore recommended that customers contact Suzhou Good-Ark Electronics Co., Ltd. or an authorized  
Suzhou Good-Ark Electronics Co., Ltd. for the latest product information before purchasing a product listed  
herein. The information described here may contain technical inaccuracies or typographical errors. Suzhou  
Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, liability, or other loss rising from  
these inaccuracies or errors. Please also pay attention to information published by Suzhou Good-Ark  
Electronics Co., Ltd. by various means, including our website home page.  
(http://www.goodark.com)  
When using any or all of the information contained in these materials, including product data, diagrams, charts,  
programs, and algorithms, Please be sure to evaluate all information as a total system before making a final  
decision on the applicability of the information and products. Suzhou Good-Ark Electronics Co., Ltd. assumes  
no responsibility for any damage, liability or other loss resulting from the information contained herein.  
The prior written approval of Suzhou Good-Ark Electronics Co., Ltd. is necessary to reprint or reproduce in  
whole or in part these materials.  
Please contact Suzhou Good-Ark Electronics Co., Ltd. or an authorized distributor for further details on these  
materials or the products contained herein.  
www.goodark.com  
4/4  
2014.02-Rev.A  

相关型号:

FF3-04-R15

Card Edge Connector, 4 Contact(s), 1 Row(s), Female, Right Angle, 0.049 inch Pitch, Solder Terminal, Fcc Retnn Dvc, Black Insulator
DDK

FF3-04-S15

Card Edge Connector, 4 Contact(s), 1 Row(s), Female, Straight, 0.049 inch Pitch, Solder Terminal, Fcc Retnn Dvc, Black Insulator
DDK

FF3-06-R15

Card Edge Connector, 6 Contact(s), 1 Row(s), Female, Right Angle, 0.049 inch Pitch, Solder Terminal, Fcc Retnn Dvc, Black Insulator
DDK

FF3-07-R15

Card Edge Connector, 7 Contact(s), 1 Row(s), Female, Right Angle, 0.049 inch Pitch, Solder Terminal, Fcc Retnn Dvc, Black Insulator
DDK

FF3-07-S15

Card Edge Connector, 7 Contact(s), 1 Row(s), Female, Straight, 0.049 inch Pitch, Solder Terminal, Fcc Retnn Dvc, Black Insulator
DDK

FF3-08-R15

Card Edge Connector, 8 Contact(s), 1 Row(s), Female, Right Angle, 0.049 inch Pitch, Solder Terminal, Fcc Retnn Dvc, Black Insulator
DDK

FF3-08-S15

Card Edge Connector, 8 Contact(s), 1 Row(s), Female, Straight, 0.049 inch Pitch, Solder Terminal, Fcc Retnn Dvc, Black Insulator
DDK

FF3-09-S15

Card Edge Connector, 9 Contact(s), 1 Row(s), Female, Straight, 0.049 inch Pitch, Solder Terminal, Fcc Retnn Dvc, Black Insulator
DDK

FF3-10-R15

Card Edge Connector, 10 Contact(s), 1 Row(s), Female, Right Angle, 0.049 inch Pitch, Solder Terminal, Fcc Retnn Dvc, Black Insulator
DDK

FF3-10-S15

Card Edge Connector, 10 Contact(s), 1 Row(s), Female, Straight, 0.049 inch Pitch, Solder Terminal, Fcc Retnn Dvc, Black Insulator
DDK

FF3-11-R15

Card Edge Connector, 11 Contact(s), 1 Row(s), Female, Right Angle, 0.049 inch Pitch, Solder Terminal, Fcc Retnn Dvc, Black Insulator
DDK

FF3-11-S15

Card Edge Connector, 11 Contact(s), 1 Row(s), Female, Straight, 0.049 inch Pitch, Solder Terminal, Fcc Retnn Dvc, Black Insulator
DDK