LS2B [GOOD-ARK]

Surface Mount Schottky Rectifier;
LS2B
型号: LS2B
厂家: GOOD-ARK ELECTRONICS    GOOD-ARK ELECTRONICS
描述:

Surface Mount Schottky Rectifier

文件: 总4页 (文件大小:380K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
LS2B  
Surface Mount Schottky Rectifier  
Reverse Voltage 100V Forward Current 2A  
Features  
• Schottky barrier diodes  
• Low forward voltage drop  
• Solder dip 260 °C, 10 s  
• Low profiletypical thickness 1.0mm  
• Moisture sensitivity: level 1, per J-STD-020  
eSGB (SMAF)  
Typical Applications  
For use in low voltage,high freqency inverters,free wheeling, and polarity  
protection application  
Maximum Ratings (TA = 25 °C unless otherwise noted)  
LS2B  
Unit  
Parameter  
Symbol  
100  
70  
Maximum repetitive peak reverse voltage  
Maximum RMS voltage  
Maximum DC blocking voltage  
V
V
V
A
VRRM  
VRMS  
VDC  
100  
2.0  
Maximum average forward rectified current  
IF(AV)  
Peak forward surge current 8.3 ms single half  
sine-wave superimposed on rated load  
45  
A
IFSM  
Operating junction and storage temperature  
range  
- 55 to + 150  
°C  
TJ, TSTG  
Electrical Characteristics (TA = 25 °C unless otherwise noted)  
LS2B  
Unit  
Parameter  
Test Conditions Symbol  
Maximum instantaneous  
forward voltage  
0.81  
Volts  
VF  
IR  
IF=2A, TA=25  
TA=25℃  
Maximum DC reverse  
current at rated DC blocking  
voltage  
0.5  
mA  
60  
CJ  
pF  
Typical junction capacitance  
4.0 V, 1 MHz  
1)  
20  
℃/W  
Typical thermal resistance  
juntion to mount  
RθJM  
Note1:Thermal resistance from junction to mount,mounted on PCB with 8.0×8.0mm copper pads  
www.goodark.com  
1/4  
2015.01-Rev.A  
LS2B  
Surface Mount Schottky Rectifier  
Reverse Voltage 100V Forward Current 2A  
Ratings and Characteristics Curves  
(TA = 25unless otherwise noted)  
Figure 2.Maximum Non-Repetitive  
Peak Forward Surge Current  
Figure 1. Typical Instantaneous Forward  
Characteristics  
Figure 4. Typical Junction Capacitance  
Figure 3. Typical Reverse Characteristics  
Figure 5.Forward Current Derating Curve  
www.goodark.com  
2/4  
2015.01-Rev.A  
LS2B  
Surface Mount Schottky Rectifier  
Reverse Voltage 100V Forward Current 2A  
Package Outline Dimensions  
DIM  
Unit: mm  
Unit: inch  
MIN MAX  
MIN  
0.92  
0
MAX  
1.08  
0.1  
A
A1  
B
C
D
E
L
HE  
0.036 0.043  
0.000 0.004  
0.049 0.057  
0.004 0.010  
0.102 0.110  
0.161 0.169  
0.028 0.043  
0.189 0.205  
1.25  
0.1  
2.6  
4.1  
0.7  
4.8  
1.45  
0.25  
2.8  
4.3  
1.1  
5.2  
Soldering footprint  
Packing Information  
Packing quantities:  
10,000 pcs/Reel12mm Tape, 13" Reel  
Tape & Reel Specification  
www.goodark.com  
3/4  
2015.01-Rev.A  
LS2B  
Surface Mount Schottky Rectifier  
Reverse Voltage 100V Forward Current 2A  
Disclaimers  
These materials are intended as a reference to assist our customers in the selection of the Suzhou  
Good-Ark product best suited to the customers application; they do not convey any license under  
any intellectual property rights, or any other rights, belonging to Suzhou Good-Ark Electronics Co.,  
Ltd.or a third party.  
Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, or infringement  
of any third-partys rights, originating in the use of any product data, diagrams, charts, programs,  
algorithms, or circuit application examples contained in these materials.  
All information contained in these materials, including product data, diagrams, charts, programs  
and algorithms represents information on products at the time of publication of these materials, and  
are subject to change by Suzhou Good-Ark Electronics Co., Ltd. without notice due to product  
improvements or other reasons. It is therefore recommended that customers contact Suzhou  
Good-Ark Electronics Co., Ltd. or an authorized Suzhou Good-Ark Electronics Co., Ltd. for the  
latest product information before purchasing a product listed herein. The information described  
here may contain technical inaccuracies or typographical errors. Suzhou Good-Ark Electronics Co.,  
Ltd. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies  
or errors. Please also pay attention to information published by Suzhou Good-Ark Electronics Co.,  
Ltd. by various means, including our website home page.  
(http://www.goodark.com)  
When using any or all of the information contained in these materials, including product data,  
diagrams, charts, programs, and algorithms, Please be sure to evaluate all information as a total  
system before making a final decision on the applicability of the information and products. Suzhou  
Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, liability or other loss  
resulting from the information contained herein.  
The prior written approval of Suzhou Good-Ark Electronics Co., Ltd. is necessary to reprint or  
reproduce in whole or in part these materials.  
Please contact Suzhou Good-Ark Electronics Co., Ltd. or an authorized distributor for further details  
on these materials or the products contained herein.  
www.goodark.com  
4/4  
2015.01-Rev.A  

相关型号:

LS2B1H

Rectifier Diode, Schottky, 1 Phase, 1 Element, 2A, 110V V(RRM), Silicon,
GOOD-ARK

LS2BB-1DT

Surface Mountable Illuminated Switch
ETC

LS2BB-1FGT

Surface Mountable Illuminated Switch
ETC

LS2BB-1HT

Surface Mountable Illuminated Switch
ETC

LS2BB-1PGT

Surface Mountable Illuminated Switch
ETC

LS2BB-1RT

Surface Mountable Illuminated Switch
ETC

LS2BB-1SDT

Surface Mountable Illuminated Switch
ETC

LS2BB-1URT

Surface Mountable Illuminated Switch
ETC

LS2BB-1YT

Surface Mountable Illuminated Switch
ETC

LS2BB-2DT

Surface Mountable Illuminated Switch
ETC

LS2BB-2FGT

Surface Mountable Illuminated Switch
ETC

LS2BB-2HT

Surface Mountable Illuminated Switch
ETC