SMBJ75C [GOOD-ARK]

Trans Voltage Suppressor Diode, 75V V(RWM), Bidirectional;
SMBJ75C
型号: SMBJ75C
厂家: GOOD-ARK ELECTRONICS    GOOD-ARK ELECTRONICS
描述:

Trans Voltage Suppressor Diode, 75V V(RWM), Bidirectional

局域网 光电二极管
文件: 总4页 (文件大小:229K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
SMBJ5.0 thru 440CA  
Surface Mount Transient Voltage Suppressors  
Peak Pulse Power 600W Stand-off Voltage 5.0 to 440V  
Features  
Plastic package has Underwriters Laboratory Flammability  
Classification 94V-0  
Low profile package with built-in strain relief for surface  
mounted applications  
Glass passivated junction  
Low incremental surge resistance, excellent clamping capability  
600W peak pulse power capability with a 10/1000us  
waveform, repetition rate (duty cycle): 0.01%  
Very fast response time  
High temperature soldering guaranteed:  
250oC/10 seconds at terminals  
Mechanical Data  
Case: JEDEC DO-214AA(SMB J-Bend) molded plastic over  
passivated junction  
Terminals: Solder plated, solderable per MIL-STD-750,  
Method 2026  
Polarity: For unidirectional types the band denotes the cathode,  
which is positive with respect to the anode under normal TVS  
operation  
Weight: 0.003oz., 0.093g  
Devices for Bidirectional Applications  
For bi-directional devices, use suffix CA (e.g. SMBJ10CA). Electrical characteristics apply in both directions.  
Maximum Ratings and Thermal Characteristics  
(Ratings at 25oC ambient temperature unless otherwise specified.)  
Parameter  
Symbol  
Value  
Unit  
Peak pulse power dissipation with  
PPPM  
IPPM  
Minimum 600  
See Next Table  
100  
W
A
a 10/1000us waveform (1,2) (see Fig. 1)  
Peak pulse current with a 10/1000us waveform (1)  
Peak forward surge current 8.3ms single half sine-wave  
uni-directional only (2)  
IFSM  
A
Typical thermal resistance, junction to ambient (4)  
RθJA  
RθJL  
100  
20  
oC/W  
oC/W  
oC  
Typical thermal resistance, junction to lead  
Operating junction and storage temperature range  
TJ, TSTG  
-55 to +150  
Notes:  
1. Non-repetitive current pulse, per Fig.3 and derated above TA=25oC per Fig. 2  
2. Mounted on 0.2 x 0.2" (5.0 x 5.0 mm) copper pads to each terminal  
3. Mounted on minimum recommended pad layout  
589  
Electrical Characteristics  
Ratings at 25oC ambient temperature unless otherwise specified. VF=3.5V at IF=50A (uni-directional only)  
Maximum  
Maximum  
peak pulse  
surge  
Breakdown voltage  
V(BR)  
reverse  
leakage  
at VWM  
Maximum  
clamping  
voltage  
Device marking  
code  
Test  
current  
at IT  
Stand-off  
voltage  
VWM  
(Volts) (1)  
current  
(3)  
(2)  
ID  
IPPM  
at IPPM  
Device Type  
UNI  
KD  
KE  
KF  
KG  
KH  
KK  
KL  
KM  
KN  
KP  
KQ  
KR  
KS  
KT  
KU  
KV  
KW  
KX  
KY  
KZ  
LD  
LE  
LF  
BI  
AD  
AE  
AF  
AG  
AH  
AK  
AL  
Min.  
6.40  
6.40  
6.67  
6.67  
7.22  
7.22  
7.78  
7.78  
8.33  
8.33  
8.89  
8.89  
9.44  
9.44  
10.0  
10.0  
11.1  
11.1  
12.2  
12.2  
13.3  
13.3  
14.4  
14.4  
15.6  
15.6  
16.7  
16.7  
17.8  
17.8  
18.9  
18.9  
20.0  
20.0  
22.2  
22.2  
24.4  
24.4  
26.7  
26.7  
28.9  
28.9  
31.1  
31.1  
33.3  
33.3  
Max.  
7.82  
7.07  
8.15  
7.37  
8.82  
7.98  
9.51  
8.60  
10.2  
9.21  
10.9  
9.83  
11.5  
10.4  
12.2  
11.1  
13.6  
12.3  
14.9  
13.5  
16.3  
14.7  
17.6  
15.9  
19.1  
17.2  
20.4  
18.5  
21.8  
19.7  
23.1  
20.9  
24.4  
22.1  
27.1  
24.5  
29.8  
26.9  
32.6  
29.5  
35.3  
31.9  
38.0  
34.4  
40.7  
36.8  
(mA)  
(Volts)  
(uA)  
800  
800  
800  
800  
500  
500  
200  
200  
100  
100  
50  
(A)  
VC (Volts)  
SMBJ5.0  
10  
10  
5.0  
5.0  
6.0  
6.0  
6.5  
6.5  
7.0  
7.0  
7.5  
7.5  
8.0  
8.0  
8.5  
8.5  
9.0  
9.0  
10  
10  
11  
62.5  
65.2  
52.6  
58.3  
48.8  
53.6  
45.1  
50.0  
42.0  
46.5  
40.0  
44.1  
37.7  
41.7  
35.5  
39.0  
31.9  
35.3  
29.9  
33.0  
27.3  
30.2  
25.2  
27.9  
23.3  
25.9  
22.3  
24.6  
20.8  
23.1  
19.7  
21.7  
18.6  
20.5  
16.8  
18.5  
15.2  
16.9  
14.0  
15.4  
12.9  
14.3  
12.0  
13.2  
11.2  
12.4  
9.6  
(5)  
SMBJ5.0A  
9.2  
SMBJ6.0  
SMBJ6.0A  
SMBJ6.5  
SMBJ6.5A  
SMBJ7.0  
SMBJ7.0A  
SMBJ7.5  
SMBJ7.5A  
SMBJ8.0  
SMBJ8.0A  
SMBJ8.5  
SMBJ8.5A  
SMBJ9.0  
SMBJ9.0A  
SMBJ10  
10  
11.4  
10.3  
12.3  
11.2  
13.3  
12.0  
14.3  
12.9  
15.0  
13.6  
15.9  
14.4  
16.9  
15.4  
18.8  
17.0  
20.1  
18.2  
22.0  
19.9  
23.8  
21.5  
25.8  
23.2  
26.9  
24.4  
28.8  
26.0  
30.5  
27.6  
32.2  
29.2  
35.8  
32.4  
39.4  
35.5  
43.0  
38.9  
46.6  
42.1  
50.0  
45.4  
53.5  
48.4  
10  
10  
10  
10  
AM  
AN  
AP  
AQ  
AR  
AS  
AT  
10  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
50  
20  
20  
AU  
AV  
AW  
AX  
AY  
AZ  
BD  
BE  
BF  
BG  
BH  
BK  
BL  
10  
10  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
SMBJ10A  
SMBJ11  
SMBJ11A  
SMBJ12  
11  
12  
12  
13  
13  
14  
14  
15  
15  
16  
16  
17  
17  
18  
18  
20  
20  
22  
22  
24  
24  
26  
26  
28  
28  
30  
30  
SMBJ12A  
SMBJ13  
SMBJ13A  
SMBJ14  
LG  
LH  
LK  
LL  
SMBJ14A  
SMBJ15  
SMBJ15A  
SMBJ16  
LM  
LN  
LP  
LQ  
LR  
LS  
LT  
BM  
BN  
BP  
BQ  
BR  
BS  
BT  
BU  
BV  
BW  
BX  
BY  
BZ  
CD  
CE  
CF  
CG  
CH  
CK  
SMBJ16A  
SMBJ17  
SMBJ17A  
SMBJ18  
SMBJ18A  
SMBJ20  
LU  
LV  
SMBJ20A  
SMBJ22  
LW  
LX  
LY  
SMBJ22A  
SMBJ24  
SMBJ24A  
SMBJ26  
LZ  
MD  
ME  
MF  
MG  
MH  
MK  
SMBJ26A  
SMBJ28  
SMBJ28A  
SMBJ30  
SMBJ30A  
Notes:  
1. V(BR) measured after IT applied for 300us square wave pulse or equivalent  
2. Surge current waveform per Fig. 3 and derate per Fig. 2  
3. For bi-directional types having VWM of 10 Volts and less, the ID limit is doubled  
4. All terms and symbols are consistent with ANSI/IEEE C62.35  
5. For the bidirectional SMBJ5.0CA, the maximum V(BR) is 7.25V.  
590  
Electrical Characteristics  
Ratings at 25oC ambient temperature unless otherwise specified. VF=3.5V at IF=50A (uni-directional only)  
Maximum  
reverse  
Maximum  
peak pulse  
surge  
Maximum  
clamping  
voltage  
at IPPM  
Breakdown voltage  
Device marking  
code  
V(BR)  
Test  
current  
at IT  
Stand-off  
voltage  
VWM  
leakage  
at VWM  
(Volts) (1)  
current  
(3)  
(2)  
ID  
IPPM  
VC  
Device type  
SMBJ33  
UNI  
ML  
MM  
MN  
MP  
MQ  
MR  
MS  
MT  
MU  
MV  
MW  
MX  
MY  
MZ  
ND  
NE  
NF  
BI  
CL  
CM  
CN  
CP  
CQ  
CR  
CS  
CT  
CU  
CV  
CW  
CX  
CY  
CZ  
DD  
DE  
DF  
DG  
DH  
DK  
DL  
DM  
DN  
DP  
DQ  
DR  
DS  
DT  
DU  
DV  
DW  
DX  
DY  
DZ  
FD  
FE  
FF  
Min.  
36.7  
36.7  
40.0  
40.0  
44.4  
44.4  
47.8  
47.8  
50.0  
50.0  
53.3  
53.3  
56.7  
56.7  
60.0  
60.0  
64.4  
64.4  
66.7  
66.7  
71.1  
71.1  
77.8  
77.8  
83.3  
83.3  
86.7  
86.7  
94.4  
94.4  
100  
100  
111  
Max.  
44.9  
40.6  
48.9  
44.2  
54.3  
49.1  
58.4  
52.8  
61.1  
55.3  
65.1  
58.9  
69.3  
62.7  
73.3  
66.3  
78.7  
71.2  
81.5  
73.7  
86.9  
78.6  
95.1  
86.0  
102  
92.1  
106  
95.8  
115  
(mA)  
(Volts)  
(uA)  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
(A)  
10.2  
11.3  
9.3  
10.3  
8.4  
9.3  
7.8  
8.6  
7.5  
8.3  
7.0  
7.8  
6.6  
7.3  
6.2  
6.9  
5.8  
6.4  
5.6  
6.2  
5.3  
5.8  
4.8  
5.3  
4.5  
5.0  
4.3  
4.8  
4.0  
4.4  
3.8  
4.1  
3.4  
3.7  
3.1  
3.4  
2.8  
3.1  
2.6  
2.9  
2.2  
2.5  
2.1  
2.3  
2.0  
2.2  
2.1  
1.9  
1.7  
1.5  
1.3  
1.1  
0.9  
0.9  
(Volts)  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
33  
33  
59.0  
53.3  
64.3  
58.1  
71.4  
64.5  
76.7  
69.4  
80.3  
72.7  
85.5  
77.4  
91.1  
82.4  
96.3  
87.1  
103  
93.6  
107  
96.8  
114  
103  
125  
113  
134  
121  
139  
126  
151  
137  
160  
146  
179  
162  
196  
177  
214  
193  
231  
209  
268  
243  
287  
259  
304  
275  
292  
324  
356  
405  
486  
567  
648  
713  
SMBJ33A  
SMBJ36  
36  
SMBJ36A  
SMBJ40  
36  
40  
SMBJ40A  
SMBJ43  
40  
43  
SMBJ43A  
SMBJ45  
43  
45  
SMBJ45A  
SMBJ48  
45  
48  
SMBJ48A  
SMBJ51  
48  
51  
SMBJ51A  
SMBJ54  
51  
54  
SMBJ54A  
SMBJ58  
54  
58  
SMBJ58A  
SMBJ60  
NG  
NH  
NK  
NL  
58  
60  
SMBJ60A  
SMBJ64  
60  
64  
SMBJ64A  
SMBJ70  
NM  
NN  
NP  
NQ  
NR  
NS  
NT  
64  
70  
SMBJ70A  
SMBJ75  
70  
75  
SMBJ75A  
SMBJ78  
75  
78  
SMBJ78A  
SMBJ85  
78  
NU  
NV  
NW  
NX  
NY  
NZ  
85  
SMBJ85A  
SMBJ90  
104  
122  
111  
85  
90  
SMBJ90A  
SMBJ100  
SMBJ100A  
SMBJ110  
SMBJ110A  
SMBJ120  
SMBJ120A  
SMBJ130  
SMBJ130A  
SMBJ150  
SMBJ150A  
SMBJ160  
SMBJ160A  
SMBJ170  
SMBJ170A  
SMBJ180A  
SMBJ200A  
SMBJ220A  
SMBJ250A  
SMBJ300A  
SMBJ350A  
SMBJ400A  
SMBJ440A  
90  
136  
123  
149  
135  
163  
147  
176  
159  
204  
185  
218  
197  
231  
209  
222  
247  
272  
309  
371  
432  
494  
543  
100  
100  
110  
110  
120  
120  
130  
130  
150  
150  
160  
160  
170  
170  
180  
200  
220  
250  
300  
350  
400  
440  
111  
PD  
PE  
PF  
122  
122  
133  
133  
144  
144  
167  
167  
178  
178  
189  
189  
201  
224  
246  
279  
335  
391  
447  
492  
PG  
PH  
PK  
PL  
FG  
FH  
FK  
FL  
PM  
PN  
PP  
PQ  
PR  
PT  
FM  
FN  
FP  
FQ  
FR  
FT  
PV  
PX  
PZ  
FV  
FX  
FZ  
QE  
QG  
QK  
QM  
GE  
GG  
GK  
GM  
Notes:  
1. V(BR) measured after IT applied for 300us square wave pulse or equivalent  
2. Surge current waveform per Fig. 3 and derate per Fig. 2  
3. For bi-directional types having VWM of 10 Volts and less, the ID limit is doubled  
4. All terms and symbols are consistent with ANSI/IEEE C62.35  
5. For parts without A, the VBR is +10%  
591  
RATINGS AND CHARACTERISTIC CURVES  
(TA = 25oC unless otherwise noted)  
592  

相关型号:

UL1042

UL1042 - Uk砤d zr體nowa縪nego mieszacza iloczynowego

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ETC

ZXFV201

QUAD VIDEO AMPLIFIER

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ZETEX

ZXFV201N14

IC-SM-VIDEO AMP

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ZETEX

ZXFV201N14TA

QUAD VIDEO AMPLIFIER

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ZETEX

ZXFV201N14TC

QUAD VIDEO AMPLIFIER

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ZETEX

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ETC

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ETC

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ETC

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ETC

ZXFV302N16

IC-SM-4:1 MUX SWITCH

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ETC

ZXFV4089

VIDEO AMPLIFIER WITH DC RESTORATION

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ZETEX

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ZETEX