09A30-02-5-02N [GRAYHILL]
Rotary Switch, 2 Positions, 5PDT, Latched, 0.25A, 28VDC, Solder Terminal, Standard Type Actuator, Panel Mount-threaded, ROHS COMPLIANT;型号: | 09A30-02-5-02N |
厂家: | GRAYHILL, INC |
描述: | Rotary Switch, 2 Positions, 5PDT, Latched, 0.25A, 28VDC, Solder Terminal, Standard Type Actuator, Panel Mount-threaded, ROHS COMPLIANT 光电二极管 |
文件: | 总2页 (文件大小:66K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Special Function Rotary Switches
SERIES 09, 42, 44, 50, 51
Isolated Position
FEATURES
• Protected Switch Positions For
Safety, Caliꢄration, or Stand-ꢄy
• Choice of Push- or Pull-To-Turn
• (/2" Diameter, 200 mA and
(" Diameter, ( Amp Switch
• (0,000 Cycles of Operation
DESCRIPTION
An isolated position is one which cannot ꢄe reached ꢄy the normal rotation. An additional action is
required ꢄy the operator. It could ꢄe either Push-To-Turn, or Pull-To-Turn. After the switch is rotated
to the isolated position, releasing the shaft locks the switch in that position. Push or pull again to
rotate the switch again.
Useisolatedpositionstoprotectaswitchpositionfromindiscriminaterotation. Suchsafetypositions
might include “caliꢄrate”, “off” and/or “stand-ꢄy”.
DIMENSIONS
Series 09
Series 42 & 44
Series 50 & 51
DIM. A + .046 –.020
ꢀ+ 0,0ꢁ –0,ꢁ(ꢂ
DIM. A + .046 ꢀ(,(5ꢂ
–.020 ꢀ0,ꢁ(ꢂ
SOLDER
LUGS
DIM. A
.062 ꢀ(,ꢁ5ꢂ
PC
DIM. A
TERMINALS
Dimension A
Dimension A
1 Deck
(.227 ꢀꢃ(,(9ꢂ
(.496 ꢀꢃ7,0ꢂ
(.564 ꢀ44,7(ꢂ
2.0ꢃ2 ꢀꢁ(,6(ꢂ
1 Deck
(.ꢃ5( ꢀꢃ4,72ꢂ
(.5(5 ꢀ4ꢃ,6(ꢂ
2.06ꢃ ꢀꢁ2,40ꢂ
2.409 ꢀ6(,(9ꢂ
Dimension A
2 Decks
3 Decks
4 Decks
2 Decks
3 Decks
4 Decks
SolderLug
PC Style
.79ꢃ .02ꢁ ꢀ22,67 0,64ꢂ
.795 .02ꢁ ꢀ22,57 0,64ꢂ
Grayhill part numꢄer and date code marked on laꢄel.
Customer numꢄer marked on request.
EXTERNAL DIFFERENCES
SPECIFICATIONS
The isolated position mechanism increases the
depth of the Series ꢁ0 and ꢁ( ꢄy 0.2(5" ꢀꢁ,ꢁ(
mmꢂ. All other dimensions remain unchanged.
In Series 9, 42 and 44, it has the appearance of
an additional deck section without terminals,
located directly ꢄehind the detent system.
Materials and Finishes
Materials and finishes for the isolation
mechanism are listed here.
Series 50 and 51
Housing:Zinccasting,tin/zinc-plated
Shaft: ꢃ0ꢃ stainless steel
Electrical Ratings
The switching elements, and therefore ratings,
are the same in an isolated position switch as in
a conventional rotary switch. Mechanical life is
also the same.
Stop Pin and Stop Post: ꢃ0ꢃ stainless steel
Spring: Tinned music wire
Additional Characteristics
Shaft Movement or Vertical Travel:
Series 09
Series 09
Series 42 & 44
Series ꢁ0 & ꢁ(
.062 .020 ꢀ(,ꢁ5 0,ꢁ(ꢂ
.050 .020 ꢀ(,57 0,ꢁ(ꢂ
.070 .020 ꢀ2,0ꢃ 0,ꢁ(ꢂ
Housing: Phenolic for style A; Diallyl, for M
Shaft: ꢃ0ꢃ stainless steel, electro-polished
Stop Pin and Stop Post: ꢃ0ꢃ stainless steel
Spring: Tinned music wire
Series 42 and 44
Housing: Diallyl per MIL-M-(4
Shaft: ꢃ0ꢃ stainless steel
Lock Plate: ꢃ02 stainless steel
Lock Arm: ꢃ(6 stainless steel
Lock Post: Brass, tin/zinc-plated
Compression Spring: Tinned music wire
Push or Pull Force Required:
Series 09
(.5ꢁ .ꢁ lꢄs
Series 42 & 44
Series ꢁ0 & ꢁ(
2
2
.ꢁ lꢄs
.ꢁ lꢄs
Stops: Single pole per deck switches with the
maximum numꢄer of positions are supplied with
stops only on request: (2 positions in ꢃ0° throw,
(0 in ꢃ6°, and 7 in 4ꢁ°.
StopStrength:Approximately5.ꢁpound-inches
for the isolated position stop.
Grayhill, Inc.
• 561 Hillgrove Avenue • LaGrange, Illinois 60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com
Special Function Rotary Switches
CHOICES AND LIMITATIONS
Standard
Style
Military
Style**
Style
Description
Angle Of
Throw
No. Of
Decks
Poles Per
Deck
Positions
Per Pole
Shorting Or
Non-Shorting
0( to 04
0( to 04
0( to 04
0( to 04
0( to 04
0( to 0ꢃ
(
2
ꢃ
4
ꢁ
6
02 to (2
02 to 06
02 to 04
02 or 0ꢃ
02
N or S
N or S
N or S
N or S
N or S
N or S
09A
09M
Solder Lug
ꢃ0°
ꢃ6°
02
42A
42S
—
42M
—
42H
42HS
Solder Lug
Sealed
(2ꢁ° Temperature Rating
(2ꢁ° Temp Rating, Sealed
0( to 04
0( to 04
(
2
02 to (0
02 to 0ꢁ
N or S
N or S
—
0( to 04
0( to 04
0( to 04
0( to 04
0( to 04
0( to 04
(
2
ꢃ
4
ꢁ
6
02 to (2
02 to 06
02 to 04
02 or 0ꢃ
02
N or S
N or S
N or S
N or S
N or S
N or S
ꢃ0°
4ꢁ°
44A
44S
—
44M
—
44H
44HS
Solder Lug
Sealed
(2ꢁ° Temperature Rating
(2ꢁ° Temp Rating, Sealed
02
—
0( to 04
0( to 0ꢃ
0( or 02
0( or 02
(
2
ꢃ
4
02 to 07
02 to 04
02
N or S
N or S
N or S
N
02
--
--
--
--
ꢁ0C
Solder Lug
PC Mount
Solder Lug, Sealed
Sealed, PC
ꢁ0CP
ꢁ0M*
ꢁ0MP*
ꢃ6°
ꢃ0°
0(
0(
(
2
02 to (0
02 to 0ꢁ
N or S
N or S
--
--
--
--
ꢁ(C
Solder Lug
PC Mount
Solder Lug, Sealed
PC Mount, Sealed
(
2
ꢃ
4
02 to (2
02 to 06
02 or 0ꢃ
02 or 0ꢃ
N or S
N or S
N or S
N or S
ꢁ(CP
ꢁ(M*
ꢁ(MP*
*ꢀPull-to-Turn onlyꢂ **For specifics on military qualified products, see Standard Switch Pages.
ORDERING INFORMATION
Indicate this as a SPECIAL switch to ensure
that no error is made when the order is entered.
Sample part numꢄer:
CONVENTIONAL NUMBERS
Start ꢄy creating a conventional switch numꢄer
in the manner which follows:
Let's isolate position ( and position 2 from all
otherpositionsandfromeachother.Weindicate
isolation posts as shown here:
(2P(P2Pꢃ 4 ꢁ 6 5 7 9 (0 (( (2
To isolate just position (, descriꢄe like this:
(2P(P2 ꢃ 4 ꢁ 6 5 7 9 (0 (( (2
To isolate positions ( and 2 from all other
positions, ꢄut not from each other, do this:
(2P( 2Pꢃ 4 ꢁ 6 5 7 9 (0 (( (2
Series & Style
Angle of Throw
Number of Decks
SPECIAL
09Aꢃ0-04-(-(2N
PULL (2P(P2Pꢃ 4 ꢁ 6 5 7 9 (0 (( (2
09A30-01-1-12N
Type of Contacts
Shorting = S
DESCRIBING STOPS
Whena(-poleswitchhaslessthanthemaximum
numꢄer of positions, consider also the stop
system. Following is the arrangement for a 6
position switch with the position ( isolated.
STOP (P2 ꢃ 4 ꢁ 6 STOP
This sample part numꢄer orders a Series 9
standard style, four deck, one pole per deck,
twelve positions per pole rotary switch with non-
shorting contacts and isolation posts ꢄetween
positions (2 and (, ꢄetween ( and 2, and
ꢄetween 2 and ꢃ.
Non-Shorting = N
Positions Per Pole
Poles Per Deck
Note: No stop arrangement suffix is needed.
See Descriꢄing Stops.
The word “STOP” indicates the conventional
switch stops, which limit rotation to positions (
through 6. To isolate position ( we insert only
one isolation post–ꢄetween terminals ( and 2.
The stop system already prevents rotation
ꢄeyond terminal (.
In multi-pole switches, the stop system and
isolation system descriꢄed for the first pole,
automatically affects the other poles. In the
example aꢄove, isolating position #( on the first
pole isolates the first position ꢀterminal #5ꢂ of
the second pole. See Standard Switch Pages
for a 2 pole circuit diagram for a ꢃ0° throw
switch.
DESCRIBING POSITIONS
Thislengthyordernumꢄerisrequiredtoprevent
any possiꢄle confusion in ordering the switch.
When we receive your order, we will assign a
special “short form” part numꢄer to facilitate
future identification of this special switch. This
numꢄer is sequentially assigned as the need
arises, and is non-descriptive. A typical “short
form”specialpartnumꢄermightꢄe09YY(2ꢃ4ꢁ.
Contact Grayhill for price.
The Grayhill system for isolating positions lets
you choose the positions to ꢄe isolated. Grayhill
inserts isolation posts next to the positions to ꢄe
isolated. Consider a continuous rotation switch
of the Series 09A with a ꢃ0° angle of throw. The
terminals are listed here from ( through (2 with
aspaceꢄetweeneachtoindicatewhereisolation
posts might ꢄe inserted.
(2 ( 2 ꢃ 4 ꢁ 6 5 7 9 (0 (( (2
Not available through Distributors.
Grayhill, Inc.
• 561 Hillgrove Avenue • LaGrange, Illinois 60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com
相关型号:
09A30-02-5-02S
Rotary Switch, 2 Positions, 5PDT, Latched, 0.25A, 28VDC, Solder Terminal, Shaft Type Actuator, Panel Mount-threaded, ROHS COMPLIANT
GRAYHILL
09A30-02-6-02N
Rotary Switch, 2 Positions, 6PDT, Latched, 0.25A, 28VDC, Solder Terminal, Standard Type Actuator, Panel Mount-threaded, ROHS COMPLIANT
GRAYHILL
09A30-03-1-06S
Rotary Switch, 6 Positions, SP6T, Latched, 0.25A, 28VDC, Solder Terminal, Standard Type Actuator, Through Hole-straight,
GRAYHILL
09A30-03-1-08N
Rotary Switch, 8 Positions, SP8T, Latched, 0.25A, 28VDC, Solder Terminal, Standard Type Actuator, Through Hole-straight,
GRAYHILL
09A30-03-1-12N
Rotary Switch, 12 Positions, SP12T, Latched, 0.25A, 28VDC, Solder Terminal, Standard Type Actuator, Panel Mount-threaded, ROHS COMPLIANT
GRAYHILL
09A30-03-1-12S-C
Rotary Switch, 12 Positions, SP12T, Latched, 0.25A, 28VDC, Solder Terminal, Shaft Type Actuator, Panel Mount-threaded,
GRAYHILL
09A30-03-1-12S-F
Rotary Switch, 12 Positions, SP12T, Latched, 0.25A, 28VDC, Solder Terminal, Shaft Type Actuator, Panel Mount-threaded,
GRAYHILL
©2020 ICPDF网 联系我们和版权申明