09MSP30-04-2-06N [GRAYHILL]
Rotary Switch, 6 Positions, DP6T, Latched, 0.25A, 28VDC, Solder Terminal, Shaft Type Actuator, Panel Mount-threaded,;型号: | 09MSP30-04-2-06N |
厂家: | GRAYHILL, INC |
描述: | Rotary Switch, 6 Positions, DP6T, Latched, 0.25A, 28VDC, Solder Terminal, Shaft Type Actuator, Panel Mount-threaded, 开关 |
文件: | 总6页 (文件大小:568K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Multi-Deck Rotary Switches
SERIES 08
SERIES 09
0.5" Diameter, 1/4 Amp,
Standard, MilitarySR13
FEATURES
• Proven Quality in Thousands of
Applications
• Gold-plated Contact System
• 30°, 36°, 45°, 60° and 90° Angle
of Throw Options
• MIL Qualified Versions MIL-S-3786/13
DIMENSIONS In inches (and millimeters)
Standard Style
Rear Views
Series 09
30° Angle of Throw
Front view shows terminal location
of Series 8, 36° angle of throw.
Transpose rear view for terminal
location of other angles of throw.
.562 .020
(14,27 0,51)
DIA.
.750 .015
(19,05 0,38)
OVER TERMINALS
DIM. A + .046 – .020
(+ 0,05 – 0,51)
.312 .020
(7,92 0,51)
.260 .015
(6,60 0,38)
DIM. B REF.
STUD
PROJECTION
C
OF NON-TURN
TAB
L
.375 .020
(9,53 0,51)
.135 .015 (3,43 0,38)
#0 THREAD
.250 .020
.094 .010
(6,35 0,51)
(2,38 0,25)
15°
.562 (14,27) SER. 8
.625 (15,88) SER. 9
30°
.125 + .001 – .002
(3,18 + 0,03 – 0,05)
DIA.
COMMON LUG
SEE NOTE
.387 (9,83) SER.8
.453 (11,51) SER. 9
.015 (0,38)
COMMON LUG
.045 .003 (1,14 0,08) DIA.
HOLE AFTER PLATING
Series 08
NON-TURN TAB .062 .005
(1,58 0,13) ꢀIDE BY
36° Angle of Throw
.020 .003 (0,51 0,08) THICꢁ
INTEGRAL ASSEMBLY NUT,
DO NOT REMOVE
.687 .015
(17,45 0,38)
OVER
1/4-32 UNEF-2A THREAD
Note: Common location for a single pole per
deck switch. For common location on
TERMINALS
.500 .020
(12,7 0,51)
DIA.
multi-pole switches, see circuit diagrams.
No.
of
Decks
Approx. Weight No.
Grams of
Srs. 08 Srs. 09 Decks
Approx. Weight
Grams
Srs. 08 Srs. 09
Dimension
A
Dimension
B
Dimension
Dimension
B
36°
A
1
2
3
4
5
6
.960 (24,38)
1.228 (31,19)
1.496 (38,00)
1.764 (44,81)
2.032 (51,61)
2.550 (64,77)
.062 (1,57)
.062 (1,57)
.062 (1,57)
.062 (1,57)
.062 (1,57)
.312 (7,92)
12
14
16
18
20
22
16.0
18.5
21.0
23.5
26.0
28.5
7
8
9
10
11
12
2.818 (71,58)
3.086 (78,38)
3.354 (85,19)
3.622 (91,00)
3.890 (98,81)
.312 (7,92)
.312 (7,92)
.312 (7,92)
.312 (7,92)
.312 (7,92)
24
26
28
30
32
34
31.0
33.5
36.0
38.5
41.0
43.5
COMMON
LUG
.033 .002
(0,84 0,05) DIA.
HOLE AFTER
PLATING
4.158 (105,61) .312 (7,92)
For rear view of 45°, 60° and 90°,
see circuit diagrams.
Grayhill part number and date code marked on standard style detent cover label.
Customer part number marked on request. Grayhill part number and date code
printed on military style cover. Military number printed when required.
Rotary
16
Grayhill, Inc.
• 561 Hillgrove Avenue • LaGrange, Illinois 60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com
Multi-Deck Rotary Switches
CIRCUIT DIAGRAMS: Solder Lug Terminals
Switch is Viewed From Shaft End and Shown in Position No. 1
Note: All common terminals are located above base terminals as shown.
C OF
NON-TURN
TAB
C3
L
9
9
10
9
10
10
11
2
8
8
8
11
11
Series 09
30° Angle
of Throw
7
C2
12
12
1
12
1
7
7
6
C
L
C1
C
C1
L
6
6
C1
1
5
5
5
2
2
C2
3
4
3
ONE POLE
3
THREE POLE
C5
4
4
TꢀO POLE
C4
9
9
10 C6
10
11
8
8
11
7
C3
7
12
C4
12
C
C
L
C1
L
6
6
1
1
C1
5
5
2
2
C3
4
3
3
4
C2
C2
FOUR POLE
FIVE OR SIX POLE
C OF
L
NON-TURN
TAB
8
7
3
7
8
9
C2
5
6
9
6
Series 08
36° Angle
of Throw
10
C
5
C1
L
10
1
4
4
1
C1
3
2
2
ONE POLE
TꢀO POLE
Rear Views
C OF
NON-TURN
TAB
L
C4
7
COMMON LUG
SINGLE POLE
7
6
7
6
6
8
8
8
C3
5
5
4
Series 09
45° Angle
of Throw
C2
5
C
15°
C1
C
L
L
1
1
C1
1
4
4
C1
45°
2
2
3
3
2
3
C2
ONE POLE
TꢀO POLE
THREE OR FOUR POLE
C OF
NON-TURN
TAB
L
C3
COMMON LUG
SINGLE POLE
5
5
5
6
6
6
Series 09
60° Angle
of Throw
4
C2
4
4
C
L
C1
C1
C
L
C1
15°
1
1
1
3
3
3
60°
C2
2
2
2
ONE POLE
TꢀO POLE
THREE POLE
C OF
L
NON-TURN
TAB
4
4
COMMON LUG
SINGLE POLE
Series 09
90° Angle
of Throw
3
C2
3
C
C1
L
15°
1
C1
1
2
2
90°
ONE POLE
TꢀO POLE
Rotary
17
Grayhill, Inc.
•
561 Hillgrove Avenue
•
LaGrange, Illinois 60525-5997
•
USA
•
Phone: 708-354-1040
•
Fax: 708-354-2820
•
www.grayhill.com
Multi-Deck Rotary Switches
SERIES 08
SERIES 09
.5" Diameter, 1/4 Amp, PC Mount
FEATURES
• Gold-plated Contact System
• 30°, 36°, 60° or 90° Angle of
ThrowOptions
• Compatible with Logic Level
Voltages and Currents
DIMENSIONS In inches (and millimeters)
PC Mount Style
Rear Views
Series 09
30° Angle of Throw
Front view shows terminal location of
36° angle of throw. Transpose rear
view for terminal location of 30° angle
of throw. See Circuit Diagrams for 60°
and 90° angles of throw.
.070 .010
(1,78 0,25)
TYP.
.562 .020
(14,27 0,51)
DIA.
.140 .015
(3,56 0,38)
TYP.
DIM. A + .046 – .020
(+ 0,05 – 0,51)
.312 .020
(7,92 0,51)
DIM. B REF.
STUD
PROJECTION
.135 .015 (3,43 0,38)
.260 .015
.588 .020
(14,73 0,51)
(6,60 0,38)
.134
.010
(3,40
0,25)
C
OF NON-
TURN
TAB
L
.134 .010
(3,40 0,25)
.375 .020
.094 .010
(9,53 0,51)
(2,38 0,25)
.187 .015
(4,75 0,38)
TYP.
C
C
C
L
L
L
#0 THREAD
.250 .020
(6,35 0,51)
1.200 .020
(30,48 0,51)
TYP.
.562 (14,27) SER. 8
.625 (15,88) SER. 9
.015 (0,38)
.125 + .001 – .002
(3,18 + 0,03 – 0,05)
DIA.
Series 08
36° Angle of Throw
COMMON LUG
NON-TURN TAB .062 .005
(1,58 0,13) ꢀIDE BY
.020 .003 (0,51 0,08) THICꢁ
INTEGRAL ASSEMBLY NUT,
DO NOT REMOVE
TERMINAL DIMENSIONS AT
THIS POINT ARE .032 + .000 – .010
(0,81 + 0,00 – 0,25) ꢀIDE
BY .015 + .000 – .003
SEE NOTE
1/4-32 UNEF-2A THREAD
(0,38 + 0,00 – 0,08) THICꢁ
Note: Common location for a single pole per
.140 .015
(3,56 0,38)
TYP.
deck switch. For common location on
multi-pole switches, see circuit diagrams.
.500 .020
(12,7 0,51)
DIA.
*Termination
A standard switch uses the entire 360° of each deck as required by the circuitry.
Thus one-sided termination is standard for Series 08, 36°, 1 pole switches with 1 to
5 positions per pole; it is also standard for Series 09, 30°, 1 pole switches with 1 to
6positionsperpole.Two-sidedterminationisstandardfor1poleswitcheswithmore
positions per pole and for switches of 2 or more poles per deck.
Special switches with one-sided termination can be made for circuitry which would
require two-sided termination in standard switches. Contact Grayhill for a special
part number. See also Special Options, page J-10.
.187 .015
(4,75 0,38)
TYP.
1.125 .020
(28,58 0,51)
TYP.
Grayhill part number and date code marked on detent cover label. Customer
part number marked on request.
Rotary
18
Grayhill, Inc.
• 561 Hillgrove Avenue • LaGrange, Illinois 60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com
Multi-Deck Rotary Switches
CIRCUIT DIAGRAMS: PC Mount
Switch is Viewed From Shaft End and Shown in Position No. 1
Note: All common terminals are located above base terminals as shown.
C OF
NON-TURN
TAB
C OF
NON-TURN
TAB
L
L
12
1
12
1
6
6
11
8
2
5
11
8
2
5
1
1
Series 09
60° Angle
of Throw
Series 09
30° Angle
of Throw
3
4
10
9
3
4
10
9
5
5
C
C1
L
C
L
C2
C1
C1
C2
C1
2
2
4
4
3
3
6
7
6
7
ONE POLE
TꢀO POLE
ONE POLE
TꢀO POLE
C OF
NON-TURN
TAB
C OF
NON-TURN
TAB
L
L
1
10
1
10
1
1
2
9
7
2
4
9
Series 09
90° Angle
of Throw
Series 08
36° Angle
of Throw
4
4
8
8
C1
C
L
C
C2
C2
C1
C1
C1
3
L
3
2
2
4
7
6
5
6
5
3
TꢀO POLE
3
ONE POLE
ONE POLE
TꢀO POLE
PC BOARD MOUNTING PATTERN
36° Angle of Throw
30°, 60° and 90° Angle of Throw
.134 (3,40) TYP.
.134 (3,40) TYP.
.210
(5,33)
TYP.
.134 (3,40) TYP.
.134 (3,40) TYP.
.280
(7,11)
TYP.
BASE TERMINAL
ROꢀ HOLE LOCATION
(SEE CHART)
Number of Poles
Per Deck
Common Terminal
Hole Location
E
F
1 Pole Per Deck
2 Poles Per Deck
A
A
C
D
SHAFT END
OF SꢀITCH
.140
A
(3,56)
TYP.
.140
(3,56)
TYP.
SHAFT END
OF SꢀITCH
B
C
E
D
Base Terminals
Hole Location
.070
Angle of Throw
(1,78)
30°
60°
90°
All
E and F
D and F
COMMON TERMINAL ROꢀ
HOLE LOCATION (SEE CHART)
Diagrams shown for a two deck switch. Bushing mounting is
recommended for all PC mount rotary switches.
SHAFT AND PANEL SEAL
A shaft and panel seal is available to provide watertight mounting of the Series 08
and 09. Standard and Military Style rotary switches. Sealing is accomplished by
O-ring shaft seal and panel seal washer. ꢀhen the panel seal is compressed,
dimensionsareapproximatelythesameasanunsealedswitch.Sealedswitchesare
providedwithadoubleflatbushing.Non-turnfeaturecanbeaccomplishedbyproper
fit of this bushing into panel hole and/or by allowing non-turn tab to extend into (but
not through) panel. Military Style rotary sealed switches do not have a non-turn tab.
Rotary
19
Grayhill, Inc.
• 561 Hillgrove Avenue • LaGrange, Illinois 60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com
Multi-Deck Rotary Switches
MILITARY QUALIFIED
Series 09
Series 08
Series 08 and 09 military switches are qualified
to MIL-DTL-3786/13. They include 30°, 36°, 45°
and 60° angles of throw with solder lug terminals
in sealed and unsealed styles. See front and
rear views at right. Standard variations which do
notaffectswitchperformancecanalsobemarked
as qualified product–contact Grayhill.
Front view shows terminal location of
Series 09, 30° angle of throw.
Transpose rear view for terminal location
of other angles of throw.
30° Angle of Throw
36° Angle of Throw
.562 .020
(14,27 0,51)
DIA.
.781 .020
(19,83 0,51)
OVER TERMINALS
.718 .020
(18,24 0,51)
OVER
.260 .015
TERMINALS
(6,60 0,38)
C
OF NON-TURN
TAB
L
.500 .020
(12,7 0,51)
DIA.
The military style is dimensionally the same as
the standard except for the solder lug. Convert
standard style switch drawings to military style
drawings by including this terminal detail and
changing the over-terminal dimensions shown
here.Grayhillcanprovidecompletespecification
drawings. Qualified switches can be ordered by
the Grayhill number or the "M" number; they will
be marked per MIL-DTL-3786/13.
15°
36°
SEE NOTE
30°
.094 .010
(2,38 0,25)
Terminal Detail
.034 .003
(0,86 0,08)
Note: Common location for a single pole per
deck switch. For common location on
.068 .005
(1,73 0,13)
multi-pole switches, see circuit diagrams.
SPECIFICATIONS
Electrical Ratings
Standard Style
Rated: To make and break the following loads:
1/4 amp, 115 Vac resistive; 1/4 amp, 6-28 Vdc
resistive; 20 mA, 115 Vdc resistive; 50 mA, 115
Vac inductive; 20 mA, 28 Vdc inductive; to carry
4 amps continuous.
ContactResistance:50milliohmsmaximumafter Materials and Finishes
life
Military Qualified
Insulation Resistance: 1,000 megaohms
minimum between terminals and shaft
Dielectric Strength: 500 Vac (atmospheric
pressure) and 350 Vac (reduced pressure)
between mutually insulated parts.
DeckSeparators,EndPlateandSwitchBases:
Diallyl per (MIL-M-14) ASTM-D-5948
Rotor Mounting Plate: Thermoplastic
Mounting Bushing: Brass, tin/zinc-plated.
Shaft, Cover, Stop Plate, Retaining Ring,
Through Bolts, Shaft Extension, Stop Arm,
ThrustWashers,CoverPlateandRearSupport
Plate, Lockwashers and Nuts: Stainless steel
Detent Balls: Steel, nickel-plated
Contact Resistance: After 25,000 cycles of
operation, 50 milliohms maximum
The Series 08M and 09M also meet the
requirementsofMIL-DTL-3786SR13formoisture
resistance, stop strength, rotational torque,
vibration (10 to 2,000 cps), medium and high
shock, salt spray, explosion, thermal shock (-
65°C to 85°C) and terminal pull. ꢀhen tested at
sea level, 25°C and 68% relative humidity with
failure criteria of 50 milliohms maximum contact
resistanceand500Vacbreakdownvoltage,these
switches will make and break 250 mA at 28 Vdc
inductive (250 millihenries): 1/2 amp: at 28 Vdc
resistive: 1/2 amp; at 115 Vac: 60 Hz resistive for
10,000 cycles of operation.
Insulation Resistance: 1,000 megohms
minimum between terminals and shaft
Voltage Breakdown: 1,000 Vac initially
(500 Vac or better after most environmental tests)
Life Expectancy: 50,000 mechanical cycles of
operation. Note: Actual life is determined by a
number of factors, including electrical loading,
rate of rotation and environment, as well as
maximumcontactresistance,minimuminsulation
resistance and minimum voltage breakdown
required at the end of life.
Detent Springs: Tinned music wire
Terminals, Stator (Base) Contacts and
Common Plate: Brass, gold plate .00001"
minimum over silver plate .0003" minimum
Rotor Contact: Silver alloy, gold-plated .00001"
minimum
Mounting Hardware: Two mounting nuts .062"
(1,57) thick by .312" (7,92) across flats and one
internal tooth lockwasher are supplied with this
switch.
Mounting Nuts, Washers: Brass, tin/zinc-
plated and or stainless steel.
Electrical Ratings
Military Qualified
Materials and Finishes
Standard Style
SwitchBases:Melamineper(MIL-M-14)ASTM-
D-5948
Cover,DeckSeparatorsandEndPlate:Phenolic
per (MIL-M-14) ASTM-D-5948
Rotor Mounting Plate: Thermoplastic
Mounting Bushing: Brass, tin/zinc-plated.
Shaft, Retaining Rings, Through Bolts, Shaft
Extension, Stop Washers, Stop Arm, Thrust
Washers, Nuts, CoverPlateandRearSupport
Plate: Stainless steel
Qualified to the following MIL-DTL-3786/13
Circuit Values: (Also see Standard Style
description.) The Series 08M and 09M have been
tested to meet the requirements of MIL-S-3786,
Style SR13, the majority of which are listed. At
85°C, approximately 68% relative humidity and
sealevelpressure, theswitcheshavebeentested
to make and break the following loads, as stated
in MIL-DTL-3786/SR13: 125 milliamperes at 28
Vdcresistive:75milliamperesat115Vacresistive.
ADDITIONAL CHARACTERISTICS
Standard Style and Military Qualified
Contacts: Shorting or Non-shorting contacts
available in 30°, 36° and 45° angle of throw rotary
switches. Non-shorting contacts available in 60°
and 90° angle of throw switches. All are wiping
contacts with over 100 grams of contact force.
Stop Strength: 12 lb-inches minimum
Rotational Torque: 8-64 oz-in depending upon
the number of poles per deck and the number of
decks
Extended Studs: Switches of six decks or more
have longer studs with extra stud nuts for
recommended double end mounting.
Detent Balls: Steel, nickel-plated
The switches have also been tested at reduced
barometric pressure (70,000 feet), 25°C at
approximately 68% relative humidity to make and
break the following loads as stated in MIL-DTL-
3786/SR13. 50 milliamperes 28 Vdc resistive; 20
milliamperes 115 Vac resistive. ꢀhen tested to
the above loads at the stated conditions, the
Series 08M and 09M switches meet the following
life-limitingcriteriaafter25,000cyclesofoperation
in accordance with MIL-DTL-3786.
Detent Springs: Tinned Music wire
Terminals, Stator (Base) Contacts and
Common Plate: Brass, gold plate .00001"
minimum over silver plate .0003" minimum
Rotor Contact: Silver alloy, gold-plated .00001"
minimum
Mounting Hardware: Two mounting nuts .062"
(1,57) thick by .312" (7,92) across flats and one
internal lockwasher are supplied with switch.
Lockwasher: Stainless steel
Mounting Nuts, Washers: Brass, tin/zinc-
plated and or stainless steel.
Rotary
20
Grayhill, Inc.
• 561 Hillgrove Avenue • LaGrange, Illinois 60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com
Multi-Deck Rotary Switches
CHOICES AND LIMITATIONS
Angle
Number of Decks
Poles
Number of
Series
Style and Designation
A = Standard
of Throw
Stops Terminals
Shorting Non-Shorting Per Deck Positions/Pole
S = Standard, Shaft/Panel Seal
M = Military Style
MS = Style M, Shaft/Panel Seal
01 thru 12
01 thru 09
01 thru 12
01 thru 09
1
2
02 thru 10
02 thru 05
Solder
Fixed
08
36°
P = Standard, PC Mount
SP = Style P, Shaft/Panel Seal
MP = Military Style, PC Mount
MSP = Style MP, Shaft/Panel Seal
Printed
Circuit
01 thru 12
01 thru 09
01 thru 12
01 thru 09
1
2
02 thru 10
02 thru 05
01 thru 12
01 thru 09
01 thu 06
01 thru 04
01 thru 03
01 thru 03
01 thru 12
01 thru 09
01 thru 06
01 thru 04
01 thru 03
01 thru 03
1
2
3
4
5
6
02 thru 12
02 thru 06
02 thru 04
02 or 03
02
A = Standard
S = Standard, Shaft/Panel Seal
M = Military Style
Solder
MS = Style M, Shaft/Panel Seal
30°
02
P = Standard, PC Mount
SP = Style P, Shaft/Panel Seal
MP = Military Style, PC Mount
MSP = Style MP, Shaft/Panel Seal
01 thru 12
01 thru 09
01 thru 12
01 thru 09
1
2
02 thru 12
02 thru 06
Printed
Circuit
A = Standard,
S = Standard, Shaft/Panel Seal
M = Military Style
01 thru 12
01 thru 06
01 thru 04
01 thru 03
01 thru 12
01 thru 06
01 thru 04
01 thru 03
1
2
3
4
02 thru 08
02 thru 04
02
09
45°
60°
Fixed
MS = Style M, Shaft/Panel Seal
02
Solder
A = Standard,
S = Standard, Shaft/Panel Seal
M = Military Style
01 thru 06
01 thru 03
01 or 02
1
2
3
02 thru 006
02 or 03
02
Not
Available
MS = Style M, Shaft/Panel Seal
P = Standard, PC Mount
Printed
Circuit
SP = Style P, Shaft/Panel Seal
MP = Military Style, PC Mount
MSP = Style MP, Shaft/Panel Seal
Not
Available
01 thru 06
01 thru 03
1
2
02 thru 06
02 or 03
A = Standard
S = Standard, Shaft/Panel Seal
Not
Available
01 thru 06
01 thru 03
1
2
02 thru 04
02
Solder
90°
P = Standard, PC Mount
SP = Style, Shaft/Panel Seal
Printed
Circuit
Not
Available
01 thru 06
01 thru 03
1
2
02 thru 04
02
ORDERING INFORMATION
Series: determined by the angle of throw
Style*: Letter(s) from the Choices and Limitations chart
Angle of Throw: Must agree with Series Number
09A30–03–1–12N–F
Stop Arrangement: Add letter C or F to a one pole per deck switch with the maximum number of positions
for a stop between position 1 and the last position.
Type of Contacts: N = Non-shorting; S = Shorting
Positions Per Pole: Requires 02 positions as a minimum to the maximum allowable dependent on the angle
of throw and poles per deck
Poles Per Deck: As limited by angle of throw and switch style
Number of Decks: As limited by the angle of throw, the poles per deck, switch style and types of contacts
* All rotary switches that are required to have military designated markings and testing adhering to MIL-3786 are to be ordered by specifying
the military part number identified on the appropriate slash sheet.
Available from your local Grayhill Distributor For prices and discounts, contact a Local Sales Office, an authorized local Distributor or Grayhill.
Rotary
21
Grayhill, Inc.
• 561 Hillgrove Avenue • LaGrange, Illinois 60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com
相关型号:
09MSP30-05-1-12N-C
Rotary Switch, 12 Positions, SP12T, Latched, 0.25A, 28VDC, Solder Terminal, Shaft Type Actuator, Panel Mount-threaded,
GRAYHILL
09MSP30-05-2-06N
Rotary Switch, 6 Positions, DP6T, Latched, 0.25A, 28VDC, Solder Terminal, Shaft Type Actuator, Panel Mount-threaded,
GRAYHILL
09MSP30-05-2-06S
Rotary Switch, 6 Positions, DP6T, Latched, 0.25A, 28VDC, Solder Terminal, Shaft Type Actuator, Panel Mount-threaded,
GRAYHILL
09MSP30-06-1-12S-F
Rotary Switch, 12 Positions, SP12T, Latched, 0.25A, 28VDC, Solder Terminal, Shaft Type Actuator, Panel Mount-threaded,
GRAYHILL
©2020 ICPDF网 联系我们和版权申明