60C16-M7-4-060S [GRAYHILL]
Three-in-One Joystick, Optical Encoder and Pushbutton;
| 型号： | 60C16-M7-4-060S |
| 厂家： | 
GRAYHILL, INC |
| 描述： | Three-in-One Joystick, Optical Encoder and Pushbutton |
| 文件： | 总3页 (文件大小：557K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Optical Encoders
SERIES 60C
Multi-Function Joystick
FEATURES
• Three-in-One Joystick, Optical Encoder and Pushbutton
• Compact Packaging
• Choices of Cable Length and Termination
• Customized Solutions Available
APPLICATIONS
• Avionics
• Medical Equipment
• Automotive Navigation, Information & Entertainment Equipment
The 60C is a cost-effective replacement of a stationary mouse or trackball with improved control over cursor move-
ment. An integral Schmitt Trigger is used to stabilize against noise and vibration.
As a compact cursor control device, Grayhill's Series 60C is ideally suited for automotive and aviation dashboards,
where use of separate joysticks, encoders and pushbuttons might be impractical. It provides all the functionality of
a stationary mouse or trackball in a single unit with a 1"x1"x .661" deep housing. The joystick manipulates a cursor
left, right, up and down; the rotary encoder facilitates sequential scrolling through menu options; and the pushbutton
performs on-screen menu selects.
DIMENSIONS in inches (and millimeters)
Unless otherwise specified, standard tolerance are:
Linear ± .025
Diameter ± .010
Angle ± 2.0°
Grayhill, Inc.
• 561 Hillgrove Avenue • LaGrange, Illinois 60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com
Optical Encoders
MOUNTING DETAILS in inches (and millimeters)
FRONT MOUNTING
REAR MOUNTING
JOYSTICK OPERATION + ENCODER WAVEFORM AND TRUTH TABLE Standard Quadrature 2-Bit Code
JOYSTICK
ENCODER
Grayhill, Inc.
• 561 Hillgrove Avenue • LaGrange, Illinois 60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com
Optical Encoders
SWITCH SCHEMATIC
SPECIFICATIONS
Rotary
Slider Plate: Thermoplastic
Backplate: Thermplastic
Lightpipe, Joystick: Thermoplastic
Lightpipe, 16 pos: Thermoplastic
Centering Profile: Thermoplastic
Shaft Inner: Aluminum
Pushbutton
Electrical and Mechanical Ratings
Rating: 10 mA at 5 Vdc resistive
Contact Resistance: less than 10 ohms
Contact Bounce: < 4ms make, 10 ms break
Mechanical Life: 500K actuations minimum
Actuation Force: option 7 = 485 ± 115grams
Pushbutton Travel: 0.033 ± 0.015 inches to
contact; 0.075 inches maximum
Electrical and Mechanical Ratings
Operating Voltage: 5.00 ± 0.25 Vdc
Supply Current: 35mA TYP at 5 Vdc
Power Consumption: 175mW TYP at 5Vdc
Output: Direct output from inverting Schmitt
trigger
Output Code: 2-Bit quadrature, channel A
leads channel B by 90° in cw rotation
Logic Output Characteristics:
Pins: Stainless steel
Barbed Rivet: Stainless steel
Detent Balls: Carbon steel 100 with nickel
finish
Centering Balls: Carbon steel 100 with nickel
finish
High: No less than 3.5 Vdc
Low: No greater than 1.0 Vdc
Environmental Ratings
Operating Temperature Range: -40°C to
85°C
Storage Temperature Range: -55°C to
100°C
Relative Humidity: 96 hours at 90-95%
humidity at 40°C
Vibration: Harmonic motion with amplitude of
15g, within a varied 10 to 2000 Hz
Mechanical Shock:
Test 1: 100g for 6ms half-sine wave with a
velocity change of 12.3 ft/s
Test 2: 100g for 6ms sawtooth wave with a
velocity change of 9.7 ft/s
Thermocycle: 4 hours cycling between
-40°C to 85°C
Detent Springs: Tinned music wire
Centering Springs: Tinned music wire
Cable ASM: .050 round conductor flat cable,
PVC coated. Conductors are stranded, top-
coated wire
Mechanical Life: 500K rotational cycles
(through all positions and a full return)
Rotational Torque: medium torque option
3.00+2.00 in-oz, torque shall be within 50% of
initial value throughout life
Mounting Torque: 15 in-lbs. maximum
Shaft Push/Pull Out Force: 25 lbs minimum
Terminal Strength: 15 lbs terminal minimum
Solder: 95.5% SN, 4% AG, 0.5% CU
Dome: Stainless steel
PCB 16 Pos: NEMA grade FR-4. Plating is
gold or palladium over nickel
Infrared Emitter: Gallium aluminum arsenide
Phototransistor: Planar silicon
Resistor: Carbon film
Schmitt Trigger: RoHS Compliant TSSOP,
14 pin
Lubricating Grease: Nyogel 774L
Label: TT406 Thermal transfer cast film
Joystick
Electrical and Mechanical Ratings
Operating Voltage: 5.00 ± 0.25 Vdc
Supply Current: 35mA at TYP at 5 Vdc
Power Consumption: 175mW TYP at 5Vdc
Output: Direct output from inverting Schmitt
trigger
Materials and Finishes
Bushing: Thermoplastic
Shaft Outer: Thermoplastic
Logic Output Characteristics:
High: No less than 3.5 Vdc
OPTIONS
Contact Grayhill for custom terminations,
rotational torque, number of positions, shaft
configurations, and resolutions. Control knobs
are also available.
Upper Housing: Thermoplastic
Pushbutton Rocker: Thermoplastic
Pushbutton Actuator: Thermoplastic
Inner Shaft Slide: Thermoplastic
Low: No greater than 1.0 Vdc
Mechanical Life: 500K cycles
(through all positions and a full return)
Angle of Throw: 8° max. in all directions
ORDERING INFORMATION
Series
Angle of Throw: 22= 22.5° or 16 positions
Rotation Torque: M= Medium torque
Pushbutton: 7= 485 grams
Joystick: 4= Four directions
60C22-M7-4-060S
Termination: 0.050" center ribbon cable with; C= Connector; S= 0.1" stripped end
Cable Length: 025 thru 250 in 1/2 inch increments, 060= 6.0 inch cable
Available from your local Grayhill Distributor. For prices and discounts, contact a local sales office, an authorized distributor, or Grayhill.
Grayhill, Inc.
• 561 Hillgrove Avenue • LaGrange, Illinois 60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com
相关型号：
©2020 ICPDF网 联系我们和版权申明