62B22-LPP-060S [GRAYHILL]
Rotary Position Encoder, Single, 2 Channels,;
| 型号： | 62B22-LPP-060S |
| 厂家： | 
GRAYHILL, INC |
| 描述： | Rotary Position Encoder, Single, 2 Channels, 编码器 光电 |
| 文件： | 总2页 (文件大小：333K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Optical Encoders
SERIES 62B
Push-Pull, High Torque
FEATURES
• Multiple Switching Functions Available
in One Compact Device
• Pin, Cable and Connector with Cable
Termination Options
• Push and Pull Travel Options
• Pull Shaft Resists Accidental
Actuation
• High Rotational Torque for Positive
Detent Feel and Superior Tactile
Feedback
• Custom Modifications Available
APPLICATIONS
• Use for Menu Scrolling or
• Function Selection
• Avionics
• Industrial
• Medical
• Long Life, High Reliability
• CMOS, HCMOS, and TTL Compatible
DIMENSIONS in inches (and millimeters)
Stripped Version
.430
SHAFT-DETENT POSITION CHART
.350
(8,89)
(.050 SPC X 7)
(10,92)
# POS
DIM "A"
DIM "A"
SEE CHART
11.25
5.625
16
32
Pinned Version
Connector
Version
.219.004
(5,560,1)
*SHAFT SHOWN IN A DETENT POSITION
Ø
.687
.500
.400
(17,45)
Ø
.250.001)
(6,350,02)
(12,7)
(10,16)
.312
(7,92)
3/8-32 UNEF-2A
THREAD
.707
(17,96)
.395.015
(10,030,38)
.250.004
(6,350,1)
1.183 .ꢀ1ꢁ
(3ꢀ,ꢀꢁ ꢀ,38ꢂ
1.045
(26,54)
4.000 .ꢀ0
CONNECTOR IS
AMP P/N ꢀ15083-8
OR EQUIVALENT
1.080.015
(27,430,38)
.33ꢁ
(8,ꢁ1ꢂ
.110
(2,79)
XXX.20
SEE ORDERING INFO
.100
(2,54)
*TOLERANCES.010 U.O.S.
SWITCH SCHEMATIC, WAVEFORM, AND TRUTH TABLE
8
POWER (5V)
R*
7
6
OUTPUT A
R*
OUTPUT B
5
4
3
PULLBUTTON
PULLBUTTON
PUSHBUTTON
2
1
PUSHBUTTON
GROUND
*EXTERNAL 2.2k
PULL-UP RESISTANCE REQUIRED FOR OPERATION.
Grayhill, Inc.
• 561 Hillgrove Avenue • LaGrange, Illinois 60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com
Optical Encoders
WAVEFORM AND TRUTH TABLE Standard Quadrature 2-Bit Code
Clockwise Rotation
HIGH
Position
Output A
Output B
OUTPUT "A"
LOW
1
2
3
4
•
•
HIGH
OUTPUT "B"
LOW
•
•
1
2
3
4
5
6
Indicates logic high; blank indicates
POSITION NUMBER
•
logic low.
Code repeats every 4 positions.
SPECIFICATIONS
over Nickel
Infrared Light Emitting Diode Chips: Gal-
lium Aluminum Arsenide
Silicon Phototransistor Chips: Gold and
Aluminum Alloys
Resistor: Metal Oxide on Ceramic Substrate
Solder Pins: Brass, Plated with Tin
Code Rotor: Delrin 100
Environmental Specifications
Mounting Torque: 15 in-oz maximum
Operating Temperature Range: -400 Cto 850
C
Shaft Push-Out Force: 45 lbs minimum
Shaft Pull-Out Force: 20 lbs minimum
Terminal Strength: 15 lbs minimum
terminal pull-out force for cable or header
termination
Storage Temperature Range: -550 C to 1000 C
Humidity: 96 hours at 90-95% humidity
at 400 C
Mechanical Vibration: Harmonic motion with
amplitude of 15 g, within a varied frequency of
10 to 2000 Hz
Solderability: 95% free of pin holes and
voids
Code Housing: Hiloy-610
Pull Dome Retainer: Ryton R-4
Pull Actuator: Polyurethane, Isoplast 101
LGF40 Blk
Mechanical Shock:
Pull-Button/Push-Button Electrical
and Mechanical Specifications
Rating: 10 mA at 5 Vdc
Contact Resistance: <10 ohms
Life: 3 million actuations minimum
Contact Bounce: <4 ms make,<10 ms
break
Actuation Force: 1700±450 g for both push
and pull-button
Test 1: 100 g for 6 ms half-sine wave with a
velocity change of 12.3 ft/sec
Test 2: 100 g for 6 ms sawtooth wave with a
velocity change of 9.7 ft/sec
Cover: Ryton R-4
Cable: Copper Standard with Topcoat in
PVC Insulation (Cabled Versions Only)
Connector: PA4.6 with Tin over Nickel
Plated Phosphor Bronze (Cable/Connector
Versions)
Label: TT406 Thermal Transfer Cast Film
Solder: Sn/Ag/Cu, lead-free, no clean
Lubricating Grease: Nye Nyogel 774L
Mounting Hex Nut: Tin/Zinc Over 1/2 Hard
Brass
Lockwasher: 8-18 Stainless Steel, Passiv-
ate Finish
Pin Header: Hi-Temp Glass Filled Thermo-
plastic UL94V-0, Phosphor Bronze (Pinned
Versions Only)
Rotary Electrical and
Mechanical Specifications
Operating Voltage: 5.00±.25 Vdc
Supply Current: 30 mA maximum at 5 Vdc
Output: Open collector phototransistor, exter-
nal pull-up resistors are required
Output Code: Two-bit quadrature, channel
A leads channel B by 900 electrically during
clockwise rotation of the shaft
Logic Output Characteristics:
Logic high signal shall be no less
than 3.0 Vdc
Logic low signal shall be no greater
than 1.0 Vdc
Minimum Sink Current: 2.0 mA
Power Consumption: 150 mW maximum
Mechanical Life: 1 million rotational cycles of
operation. One cycle is a rotation through all
positions and a full return
Average Rotational Torque: 16 position:
5.0 ± 1.5 in-oz, 32-position: 2.5 ±1 .5 in-oz.
Torque shall be within 50% of initial value
throughout life
Shaft Travel: .030±.010 standard travel.
.050±.010 long travel
Materials and Finishes
Bushing: Zinc Diecast, Cadmium Plated per
QQP-416, Class II, Type II
Shaft: Aluminum
Detent Cover: Powered Metal per
SS-316N1-25
Through Bolts: 305 Stainless Steel
Through Bolts Nuts: 305 Stainless Steel
Shaft Travel Springs: Carbon Steel,
Oil Dip Finish
Detent Ball: Stainless Steel
Detent Spring: Tinned Music Wire
Spacer/Push Dome Retainer: Ryton R-4
Push Actuator: Zytel 70G33L
Snap Dome: Stainless Steel
Printed Circuit Boards: Nema Grade FR4,
Double Clad with Copper, Plated with Gold
ORDERING INFORMATION
Series
Angle of Throw: 22 = 22.50 For Code Change and 16 Detent Positions.
11 = 11.250 For Code Change and 32 Detent Positions.
Push/Pull-Button Travel: S = Standard Travel (.030" Both Directions). L = Long Travel (.050" Both Directions)
Push/Pull Option: P = Pull-Button Only. PP = Push and Pull-Button
Termination: C = .050" Pitch Ribbon Cable with Connector
S = .050" Pitch Ribbon Cable with Stripped End
62BXX-XXX-040X
P = .050" Pitch Pin Header
Cable Termination: 040 = 4.0in. Cable is terminated with Amp Connector P/N 215083-6.
See Amp Mateability Guide for mating connector details.
*Eliminate cable length if ordering pins (Ex: 62B22-SP-P)
Grayhill, Inc.
• 561 Hillgrove Avenue • LaGrange, Illinois 60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com
相关型号：
©2020 ICPDF网 联系我们和版权申明