63K100-180T [GRAYHILL]
SINGLE, 2 CHANNELS, ROTARY OPTICAL POSITION ENCODER;
| 型号： | 63K100-180T |
| 厂家： | 
GRAYHILL, INC |
| 描述： | SINGLE, 2 CHANNELS, ROTARY OPTICAL POSITION ENCODER 编码器 |
| 文件： | 总2页 (文件大小：62K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Optical Encoders
SERIES 63K
High Resolution, Ball Bearing,
4-Pin
FEATURES
• 25, 32, 50, 64, 100, 128 and 256
Cycles per Revolution Available
• Sealed Version Available
• Rugged Construction
• Cable or Pin Version
• 300 Million Life Cycles
• 5,000 RPM Shaft Rotation
DIMENSIONS In inches (and millimeters)
.250
(6,35)
.249/.250
(6,32/6,35)
.725 ± .025
(18,42 ± 0,64)
Top View
.025 (0,64) X 45˚
CHAMFER
1/2-32
UN-2A
THREADS
1.250 (31,75)
.215 (5,46)
DIA.
(KEYWAY
DEPTH)
.066
(1,68)
.020 (0,51) RADIUS
.033
(0,84)
GRAYHILL XXXX X-X
63KXXX
XXXX X-X
XXX
.001/.004
.350
(8,89)
(0,25/0,10)
(MOUNTING
SURFACE
ON TOP OF
HOUSING)
.497
(12,62)
.025 (0,64) SQ.
4 PLCS.
.650 (16,51) DIA.
MOUNTING
SURFACE
(5,56)
.310
± .025
(7,87
.100 (2,54)
3 PLCS.
EPOXY SEAL
.219
AROUND PINS
AND BACKPLATE
PERIMETER
± 0,64)
.300
(7,62)
.225 (5,72)
.250
(6,35)
Top View
.725 ± .025
(18,42 ± 0,64)
.249/.250
(6,32/6,35)
1.250 (31,75)
1/2-32
UN-2A
DIA.
.215 (5,46)
(KEYWAY
DEPTH)
.025 (0,64) X 45˚
CHAMFER
THREADS
.066
.020 RADIUS
(0, 51)
(1,68)
.033
(0,84)
GRAYHILL XXXX X-X
63RSXXX-XXX
XX X-X
XX-XXX
.001/.004
(0,25/0,10)
(MOUNTING
SURFACE
ON TOP OF
HOUSING)
.350
(8,89)
1.132 MAX.
(28,75)
.497
(12,62)
.650 (16,51) DIA.
MOUNTING
SURFACE
.219
(5,56)
EPOXY SEAL
AROUND HEADER
AND BACKPLATE
PERIMETER
*See ordering
information
for cable length.
DIM. XXX* ±.250
(6,25)
CONNECTOR:
MOLEX PIN
14-56-3046
.225 (5,72)
Unless otherwise specified, dimension tolerances are as follows: linear ± .010 (0,25), diameters ± .010 (0,25), angular ± 5˚
E-26
Grayhill, Inc. • 5 6 1 Hillgrove Avenue • LaGrange, Illinois 6 0 5 2 5 -5 9 9 7 • USA • Phone: 7 0 8 -3 5 4 -1 0 4 0 • Fax: 7 0 8 -3 5 4 -2 8 2 0 • www.gr ayhill.com
Optical Encoders
CIRCUITRY AND WAVEFORM: Standard Quadrature 2-Bit Code
PIN #
1 CYCLE
GROUND
1
OUTPUT
A
OUTPUT B
2
10 KΩ
OUTPUT
B
OUTPUT A
3
4.7 KΩ
CHANNEL A LEADS CHANNEL B BY
90˚ ± 45˚ IN ALL ROTATIONS FOR
CLOCKWISE ROTATION OF SHAFT.
10 KΩ
POWER 5V
4
SPECIFICATIONS
Electrical Ratings
Environmental Ratings
Materials and Finishes
Operating Voltage: 5.0 ±.25 Vdc
Supply Current: 30 mA maximum at 5 Vdc
Logic Output Characteristics:
Output Type: Open collector with integrated
Schmitt Trigger and 10 KΩ pull-up resistor
Maximum Sink Current: 16 mA at .40 volts
Power Consumption: 150 mW maximum
Optical Rise Time: 500 nS typical
Optical Fall Time: 14 nS typical
Operating Temperature Range: -40°C to 85°C
Storage Temperature Range: -55°C to 100°C
Relative Humidity: 90-95% at 40°C for 96
hours
Vibration Resistance: Harmonic motion with
amplitude of 15g, within a varied 10 to 2000
Hz frequency for 12 hours per MIL-STD-202,
Method 204
Shock Resistance: Test 1: 100g for 6 mS,
half-sine wave with velocity change of 12.3 ft/s.
Test 2: 100g for 6 mS, sawtooth wave with
velocity change of 9.7 ft/s.
Bushing: 6262-T9 aluminum alloy
Housing: Hiloy 610B
Code Rotor and Aperture: Chemically etched
stainless steel/electroformed nickel
Printed Circuit Board: NEMA Grade FR-4.
Five microinches minimum gold over 100
microinches minimum nickel over copper
Optical Barrier: Polyphenylene sulfide, 94 V-0
Backplate: Polyester
Header: Phosphor bronze, 200 microinches
tin over 50 microinches nickel (pin version
only)
Infrared Emitter: Gallium aluminum arsenide
Photo IC: Planar silicon
Retaining Ring: Stainless steel
Cable: 26 AWG, stranded/tinned wire, PVC
coated on .100 (2,54) centers (cable version
only)
Mechanical Ratings
Mechanical Life: 300 million revolutions
Time Life: Guaranteed for 10 years of
continuous operation (calculated from emitter
degradation data)
Mounting Torque: 20 in-lbs maximum
Terminal Strength: 5 lbs terminal pull-out
force minimum
Solderability: 95% free of pin holes and voids
Operating Torque: 0.5 in-oz maximum (no
detents) for unsealed versions
Externally Applied Shaft Force: Axial: 15 lbs
maximum; Radial: 15 lbs maximum
Connector: Glass-filled PCT, UL94V-0
Bearing Subassembly
Bearing: NSK ABEC 5 (stainless steel)
Preload Collar: 303 (stainless steel)
Spacer: 303 (stainless steel)
Bellville Spring: spring steel (stainless steel)
ORDERING INFORMATION
Series
Style: K = Standard, 4-pin, high resolution
KS = Sealed, 4-pin, high resolution
Cycles: per channel per revolution = 25, 32, 50, 64, 100, 128, 256
63KS256–020
Termination:
Blank (no dash or numbers): pins as described in drawing.
Cable Termination: 020 = 2.0 inches minimum to 250 = 25 inches maximum. Provided in increments of 1/2
inch. (Example 035 = 3.5", 060 = 6".) Cable is terminated with standard Molex part no. 14-56-3046. Use any
standard .100 center 4-pin header to interface with cable. Recommended to be mounted with Molex
header part no. 70543-0003 or 70553-0003.
Control knobs available, see page E-39.
Available from your local Grayhill Distributor. For prices and discounts, contact a local Sales Office, an authorized local Distributor or Grayhill.
E-27
Grayhill, Inc. • 5 6 1 Hillgrove Avenue • LaGrange, Illinois 6 0 5 2 5 -5 9 9 7 • USA • Phone: 7 0 8 -3 5 4 -1 0 4 0 • Fax: 7 0 8 -3 5 4 -2 8 2 0 • www.gr ayhill.com
相关型号：
©2020 ICPDF网 联系我们和版权申明