71MA30-01-1-07S
更新时间:2024-09-18 18:43:29
品牌:GRAYHILL
描述:Rotary Switch, 7 Positions, SP7T, Latched, 0.125A, 28VDC, Solder Terminal, Shaft Type Actuator, Panel Mount-threaded,
71MA30-01-1-07S 概述
Rotary Switch, 7 Positions, SP7T, Latched, 0.125A, 28VDC, Solder Terminal, Shaft Type Actuator, Panel Mount-threaded, 旋转开关
71MA30-01-1-07S 规格参数
是否无铅: | 不含铅 | 是否Rohs认证: | 符合 |
生命周期: | Active | Reach Compliance Code: | compliant |
ECCN代码: | EAR99 | HTS代码: | 8536.50.90.20 |
Factory Lead Time: | 16 weeks | 风险等级: | 5.82 |
执行器类型: | SHAFT TYPE | 主体高度: | 19.33 mm |
主体长度或直径: | 17.45 mm | 触点(交流)最大额定R负载: | .075A@115VAC |
最大触点电流(交流): | 0.075 A | 最大触点电流(直流): | 0.125 A |
触点(直流)最大额定R负载: | .125A@28VDC | 最大触点电压(交流): | 115 V |
最大触点电压(直流): | 28 V | 分度角: | 30 deg |
JESD-609代码: | e4 | 安装特点: | PANEL MOUNT-THREADED |
位置数: | 7 | 开关段数量: | 1 |
密封: | SHAFT AND PANEL SEALED | 表面贴装: | NO |
开关动作: | LATCHED | 开关功能: | SP7T |
开关类型: | ROTARY SWITCH | 端子面层: | Gold (Au) - with Nickel (Ni) barrier |
端接类型: | SOLDER | Base Number Matches: | 1 |
71MA30-01-1-07S 数据手册
通过下载71MA30-01-1-07S数据手册来全面了解它。这个PDF文档包含了所有必要的细节,如产品概述、功能特性、引脚定义、引脚排列图等信息。
PDF下载Multi-Deck Rotary Switches
SERIES 71
.5-.75" Diameter, 1/4 Amp
FEATURES
• PerformanceandValueLeader
• Molded-In Position Terminals
• Choice of Shaft/Bushing Diameters
• 30° and 36° Angles of Throw
• Military Qualified MIL-DTL-3786/39
DIMENSIONS: Standard and Military In inches (and millimeters)
Rear Views–Style A, B, MA, MB
(and sealed versions)
0.125" Diameter Shaft–Styles A and MA (and sealed versions)
30° and 36° Angle of Throw may be
interposed on either shaft diameter.
.687 .015
.312 .020
DIM. A .046 (1,17)
(17,45 0,38)
DIA.
(7,92 0,51)
DIM. B REF.
STUD PROJECTION
(SEE CHARACTER-
ISTICS)
30° Angle of Throw
SEE DETAIL
.375 .020
(9,53 0,51)
.094 .010
(2,39 0,25)
.500 .015
(12,7 0,38)
DIA.
.250 .020
(6,35 0,51)
SEE
CHART
.562
.015
(14,27
0,38)
C
.125 + .001
–.002 DIA.
(3,18 + 0,25
–0,05)
.203 .005
(5,16 0,13)
1/4 32UNEF-2A THREAD
C
OF POSITION NO. 1
L
SEE NOTE
.750 .020
C
OF BUSHING FLATS
L
(19,05 0,51)
OVER TERMINALS
0.250" Diameter Shaft–Styles B and MB (and sealed versions)
36° Angle of Throw
.312 .020
(7,92 0,51)
.687 .015
(17,45 0,38)
DIA.
SEE DETAIL
.375 .020
(9,53 0,51)
.500 .015
(12,7 0,38)
DIA.
.219 .004
(5,56 0,10)
All dimensions not shown
are the same as above.
.250 .020
(6,35 0,51)
SEE
CHART
C
.250 + .001
–.002 DIA.
(6,36 + 0,25
–0,05)
BUSHING KEYWAY
.066 .002 (1,68 0,05) WIDE BY
.036 .003 (0,91 0,08) DEEP
FROM A .375 (9,53) DIA.
SEE NOTE
.750 .020
C
OF POSITION NO. 1
L
(19,05 0,51)
OVER TERMINALS
C
OF BUSHING KEYWAY
L
3/8-32UNEF-2A THREAD
Note: Common location for a single pole per
deck switch. For common location on
multipole switches see circuit diagrams.
Approx.
Weight
Grams
Approx.
Weight
Grams
No. of
Decks
Dimension
A
Dimension
B
No. of
Dimension
Dimension
B
Decks
A
1
2
3
4
5
6
.761 (19,33)
.979 (24,87)
1.197 (30,40)
1.415 (35,94)
1.633 (41,48)
2.131 (54,13)
.031 (0,79)
.031 (0,79)
.031 (0,79)
.031 (0,79)
.031 (0,79)
.312 (7,92)
14
16
18
20
22
24
7
8
9
10
11
12
2.349 (59,66)
2.567 (65,20)
2.785 (70,74)
3.003 (76,28)
3.221 (81,81)
3.439 (87,35)
.312 (7,92)
.312 (7,92)
.312 (7,92)
.312 (7,92)
.312 (7,92)
.312 (7,92)
26
28
30
32
34
36
Terminal Detail
.034 .003
(0,86 0,08)
.068 .005
(1,73 0,13)
Angle C is 15° in 12 position switches and 36 ° in 10 position switches.
Grayhill part number and date code marked on detent cover label. Customer part
number marked on request. Military part number marked when required.
Rotary
2
Grayhill, Inc. • 561 Hillgrove Avenue • LaGrange, Illinois 60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com
Mulit-Deck Rotary Switches
DIMENSIONS: Metric All dimensions are in millimeters
4mm Diameter Shaft–Style E and ES
Rear Views
30° Angle of Throw
DIM. A 1,2
SEE DETAIL
25,00 0,5
DIM. B REF.
STUD PROJECTION
(SEE CHARACTER-
ISTICS)
Ø 17,45
0,4
Ø 12,70
0,4
8,00
0,3
8
SEE
11
CHART
14,27
0,4
C
Ø 4,00 0,03
6,00 + 0,00
–0,08
SEE NOTE
19,05 0,5
OVER TERMINALS
M7,0 X 0,75 THREAD
C OF POSITION NO. 1
L
C
OF BUSHING FLATS
L
36° Angle of Throw
Approx.
Weight
Grams
SEE DETAIL
No. of
Decks
Dim.
A
Dim.
B
Ø 12,70
0,4
1
2
3
4
5
6
7
8
9
19,33
24,87
30,40
35,94
41,48
54,13
59,66
65,20
70,74
76,28
81,81
87,35
0,79
0,79
0,79
0,79
0,79
7,92
7,92
7,92
7,92
7,92
7,92
7,92
12
14
16
18
20
22
24
26
28
30
32
34
Terminal Detail
0,86 0,07
10
11
12
SEE NOTE
1,73 0,13
19,05 0,5
OVER TERMINALS
Note: Common location for a single pole per
deck switch. For common location on
multipole switches see circuit diagrams.
Angle C is 15° in 12 position switches and
36° in 10 position switches.
Grayhill part number and date code marked on detent cover label. Customer part number marked on request.
CIRCUIT DIAGRAMS: Standard, Military and Metric
Switch is Viewed From Shaft End and Shown in Position No. 1.
Note: All common terminals are located above base terminals as shown.
C OF
BUSHING
KEYWAY
C5
9
C3
9
C4
10
L
9
10
9
9
10
10 C6
11
10
11
2
8
8
11
8
8
11
8
11
7
7
C4
C3
7
12
1
12
1
7
7
6
12
C2
12
12
30° Angle
of Throw
C
C
C
C1
C
L
L
L
L
6
6
6
6
C1
C1
1
C1
1
1
C1
5
5
5
5
5
2
2
2
2
C3
4
3
C2
4
3
3
3
4
4
3
4
C2
C2
FOUR POLE
ONE POLE
TWO POLE
THREE POLE
FIVE OR SIX POLE
C OF
L
BUSHING
7
8
8
7
C2
5
KEYWAY
6
9
9
6
36° Angle
of Throw
10
C
5
C1
L
10
1
4
4
1
C1
3
3
2
2
ONE POLE
TWO POLE
Rotary
3
Grayhill, Inc.
•
561 Hillgrove Avenue
•
LaGrange, Illinois 60525-5997
•
USA
•
Phone: 708-354-1040
•
Fax: 708-354-2820
•
www.grayhill.com
Multi-Deck Rotary Switches
SERIES 71
.5-.75" Diameter, 1/4 Amp, PC Mount
FEATURES
• Terminals From One Side
• Minimum Board Footprint
• Choice of Shaft/Bushing Diameters
• 30° and 36° Angles of Throw
• Military Qualified MIL-DTL-3786/39
DIMENSIONS: Standard and Military In inches (and millimeters)
Rear Views: Styles AF, BF, MAF, MBF
(and sealed versions)
0.125" Diameter Shaft: Styles AF and MAF (and sealed versions)
Military Qualified style MAF
includes a spacer deck between
decks2and3.Seedimensionchart.
.875 (30°)
.725 (36°) .015
30° and 36° Angle of Throw may be
interposed on either shaft diameter.
(22,23, 18,42
0,38)
30° Angle of Throw
.312 .020
(7,92 0,51)
SHAFT
DIM. A .046 (1,17)
.687 .015
(17,45 0,38)
DIA.
SHOWN
IN POSITION
ONE
DIM. B REF.
STUD PROJECTION
(SEE CHARACTER-
ISTICS)
.500 .015
(12,7 0,38)
DIA.
.375 .020
(9,53 0,51)
C
SEE
CHART
C
OF
L
.250 .020
(6,35 0,51)
BUSHING
FLATS
.562
.156 .010
(3,96 0,25)
TYP.
.015
(14,27
0,38)
C
L
.368 (9,35)
REF.
.125 – .002 + .001
(3,18 – 0,05 + 0,03)
DIA.
.094 .010
(2,39 0,25)
1/4-32 UNEF-2A
THREAD
.125 .010
(3,18 0,25)
TYP.
.015
.002
(0,38
0,05)
TERMINAL
NO. 1
SEE
NOTE
SEE NOTE
BELOW
.037 .005
(0,94 0,13)
TYP.
C
L
.203 .005
(5,16 0,13)
.110 .010
(2,79 0,25)
TYP.
.075 .005
(1,91 0,13)
TYP.
.020 .003
(0,51 0,08)
TYP.
C
L
.412 .010
(10,46 0,25)
TYP.
C C
L L
C
L
0.250" Diameter Shaft: Styles BF and MBF (and sealed versions)
Military Qualified style MBF
includesaspacerdeckbetweendecks
2 and 3. See dimension chart.
.875 (30°)
.725 (36°) .015
(22,23, 18,42
0,38)
36° Angle of Throw
All dimensions not shown
are the same as above.
.500 .015
(12,7 0,38)
DIA.
.312 .020
(7,92 0,51)
SHAFT
SHOWN
IN POSITION
ONE
.687 .015
(17,45 0,38)
DIA.
BUSHING KEYWAY .066 .002
(1,68 0,05) WIDE BY .036 .003
(0,91 0,08) DEEP FROM A
.375 (9,53) DIA.
.375 .020
(9,53 0,51)
C
SEE
C
CHART
.250 .020
(6,35 0,51)
OF
L
BUSHING
KEYWAY
.156 .010
.368 (9,35)
REF.
(3,96 0,25)
TYP.
.250 – .002 + .001
(6,35 – 0,05 + 0,03)
DIA.
.125 .010
(3,18 0,25)
TYP.
.219 .004
(5,56 0,10)
3/8 32UNEF-2A
THREAD
SEE
NOTE
.037 .005
(0,94 0,13)
TYP.
Dimension A
Dimension A Dimension B
Approx.
Weight
Grams
Dimension A Dimension B Approx.
No. of
Decks
Standard
Style
Military
Style
All
Styles
No. of
Decks
Standard
Style
Standard
Style
Weight
Grams
.075 .005
(1,91 0,13)
TYP.
C C
L L
1
2
3
4
5
6
.761 (19,33)
.979 (24,87)
1.197 (30,40)
1.415 (35,94)
1.633 (41,48)
2.131 (54,13)
.761 (19,33)
.979 (24,87)
1.415 (35,94)
1.633 (41,49)
N.A.
.031 (0,79)
.031 (0,79)
.031 (0,79)
.031 (0,79)
.031 (0,79)
.312 (7,92)
12
14
16*
18*
20
7
8
9
10
11
12
2.349 (59,66)
2.567 (65,20)
2.785 (70,74)
3.003 (76,28)
3.221 (81,81)
3.439 (87,35)
.312 (7,92)
.312 (7,92)
.312 (7,92)
.312 (7,92)
.312 (7,92)
.312 (7,92)
24
26
28
30
32
34
Note: Common location for a single pole per
deck switch. For common location on
two pole switches see circuit diagrams.
N.A.
22
Angle C is 15° in 12 position switches and 18° in 10 position switches.
*Military style switch is 18 grams for 3 decks and 20 grams for 4 decks.
Grayhill part number and date code marked on detent cover label. Customer part
number marked on request. Military part number marked when required.
See pages F-39 through F-44 for specifications,
accessories and ordering information.
Rotary
4
Grayhill, Inc. • 561 Hillgrove Avenue • LaGrange, Illinois 60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com
Multi-Deck Rotary Switches
DIMENSIONS: Metric All dimensions are in millimeters
4mm Diameter Shaft: Style EF and ESF
Rear Views
30° and 36° Angle of Throw may be
interposed on either shaft diameter.
30° Angle of Throw
Ø 12,7
0,38
25,00 0,51
DIM. A 1,17
DIM. B REF.
STUD PROJECTION
(SEE CHARACTER-
ISTICS)
22,23 0,4
Ø 17,45
0,4
8,00 0,3
C
OF
L
3,96 0,25
TYP.
BUSHING
FLATS
9,35
REF.
14,27
0,38
3,18 0,25
TYP.
Ø 4,00 0,03
SEE
NOTE
0,94 0,13
TYP.
1,91 0,13
TYP.
M7 X 0,75
THREAD
C C
L L
TERMINAL
NO. 1
.0,38
SEE NOTE
BELOW
7,62 0,25
0,03
TYP.
C
6,00 + 0,00 –0,08
C
L
C
L
L
2,79 0,25
TYP.
0,51 0,08 TYP.
C
L
36° Angle of Throw
10,46 0,25
C
L
Ø 12,7
0,38
18,42
0,04
Approx.
Weight
Grams
Approx.
Weight
Grams
No. of
Decks
Dim.
A
Dim.
B
No. of
Decks
Dim.
A
Dim.
B
1
2
3
4
5
6
19,33
24,87
30,40
35,94
41,48
54,13
0,79
0,79
0,79
0,79
0,79
7,92
12
14
16
18
20
22
7
8
9
10
11
12
59,66
65,20
70,74
76,28
81,81
87,35
7,92
7,92
7,92
7,92
7,92
7,92
24
26
28
30
32
34
3,96 0,25
TYP.
9,35
REF.
3,18 0,25
TYP.
0,94 0,13
TYP.
SEE
NOTE
Note: Common location for a single pole per
deck switch. For common location on
two pole switches see circuit diagrams.
1,91 0,13
TYP.
C C
L L
7,62 0,25
C
C
Grayhill part number and date code marked on detent cover label. Customer part number marked on request.
L
L
CIRCUIT DIAGRAMS: Standard, Military and Metric PC Mount
Circuit is Viewed From Shaft End and Shown in Position No. 1
C
L
OF BUSHING
KEYWAY OR
FLATS
C
OF BUSHING
KEYWAY OR
FLATS
ONE POLE
ONE POLE
L
30° Angle
of Throw
36° Angle
of Throw
12 11 10
9
8
7
6
5
4
3
2
C1
1
10 9 8
7
6
5
1
4
3 2
C1
TWO POLE
TWO POLE
C
C
L
L
12 1110
C2
9
8
7
6
5
4
3
2
1
10 9 8
C2
7
6
5
1
4
3 2
C1
C1
Rotary
5
Grayhill, Inc.
• 561 Hillgrove Avenue • LaGrange, Illinois 60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com
Multi-Deck Rotary Switches
SERIES 71: PC Board Pattern In inches (and millimeters)
All Styles Except 71BT
36° Angle of Throw
30° Angle of Throw
COMMON TERMINAL HOLE
LOCATION (SEE CHART)
COMMON TERMINAL HOLE
LOCATION (SEE CHART)
.300
.300
(7,62)
TYP.
(7,62)
TYP.
.075
(1,91)
TYP.
.075
(1,91)
TYP.
.037 (0,94)
.037 (0,94)
B
A
B
A
.110 (2,79 )TYP.
.110 (2,79 )TYP.
.110 TYP.
(2,79 )
.110 TYP.
(2,79 )
OF COMMON
FOR DECK ONE
C
SHAFT END
OF SWITCH
SHAFT END
OF SWITCH
L
Shown for a two deck switch.
Bushing mount is recommended.
Spacer decks can be supplied to facilitate PC board layouts of
three or more decks. A spacer deck does not have any
terminals and provides no switching function. Dimensionally, it
requires the same space as one normal switch deck. Spacer
deck can be placed at any location in the switch, per your
instructions.Switcheswhichincludespacerdecksareprocured
under a special part number.
Number of Poles
Per Deck
Common Terminal
Hole Location
1
2
A
A and B
SERIES 71: PC MOUNT ACCESSORY
1/8" and 1/4" Diameter Shaft Styles
In inches (and millimeters)
Metric Mount Styles
In millimeters
DIMENSIONS APPLY TO BOTH WASHERS.
WASHER IS
.032 (0,81) THICK
.687
(17,45)
DIA.
.255 .002
(6,48 0,05) DIA.
.375 .002
(9,53 0,05)
Ø 17.45
0.08
C
L
C
L
0.368 .003
(9,35 0,08)
9.35
0.08
THICKNESS
0.81 0.05
0.030 .001
(0,76 0,03)
0.76 0.03
.500
.002
(12,7
0,05)
.130 .003
(3,30 0,08)
12.7
0.05
.207 .005
(5,26 0,13)
FOR USE WITH
STYLE EF
PART 71C2111
FOR USE WITH
FOR USE WITH
STYLE BF
PART 71C2053
STYLE AF
PART 71C2054
For printed circuit styles. Mounting bushing provides additional
support for the front end of the switch. Order separately by
appropriate part number. Rotary switch discount applies.
Rotary
6
Grayhill, Inc.
• 561 Hillgrove Avenue • LaGrange, Illinois 60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com
Multi-Deck Rotary Switches
SERIES 71
.5-.75" Diameter, 1/4 Amp,
ProcessSealed
FEATURES
• NoHandSolderingRequired
• Sealed to Resist Intrusion by Flux,
SolderandCleaningSolutions
• .75"Diameter
• 250 mA for 20,000 Cycles
• 36°, 1 or 2 Poles, Up to 5 Decks
• 10 Positions, Continuous Rotation,
or 2-9 Positions With Fixed Stops
DIMENSIONS: Standard and Military In inches (and millimeters)
Style BT
Rear View
.725 .015
(18,42 0,38)
.275 .020
(6,99 0,51)
DIM. A
.046(1,17)
Ø .687 .015
(17,45 0,38)
.375 .020
(9,53 0,51)
DIM. B
REF.
.310 .010
(7,87 0,25)
.250 .020
(6,35 0,51)
18°
.562 .015
(14,27 0,38)
.368 .005
(9,35 0,13)
.250 + .001
1
10
–.002 DIA.
(6,36 + 0,25
–0,05)
.219 .004
(5,56 0,10)
.015 .002
(0,38 0,05)
.030 .002
(0,76 0,05)
TYP.
.125 .010
(3,18 0,25)
.156 .010
(3,96 0,25)
.100 .010
(2,5 0,25)
2 PLS.
3/8-32
UNEF-2A
THREAD
.015 .002
(0,38 0,05)
TYP.
.020 .003
(0,51 0,08)
TYP.
.037 .005
(0,94 0,13)
.428 .008
(10,87 0,20)
.075 .005
(1,91 0,13) TYP.
C
L
COMMON TERMINAL
TERMINAL NO. 1
.110 .010
(2,79 0,25)
TYP.
C C
L L
C
L
No. of
Decks
Dimension
Dimension
B
.449 .008
(11,4 0,20)
A
C
L
1
2
3
4
5
0.795 (20,19)
1.040 (26,42)
1.285 (32,64)
1.530 (38,86)
1.775 (45,09)
0.031 (0,79)
0.053 (1,35)
0.076 (1,93)
0.098 (2,49)
0.120 (3,05)
Shaft flat is opposite point of contact for pole
number one. Shaft is shown here in position 1.
Grayhill part number and date code marked on detent cover label. Customer part number marked on request.
STYLE 71BT: PC Board Pattern
CIRCUIT DIAGRAMS
Circuit is Viewed From Shaft End
and Shown in Position No. 1
Including Integral Front Plate
Standoffs
36° Angle of Throw
.440 (11,18)
.220 (5,59)
.029 (0,74) Ø MIN.
HOLE 33 PLS.
C
OF BUSHING
KEYWAY OR
FLATS
ONE POLE
L
.036 (0,91)
Ø MIN. HOLE
2 PLS.
.075 (1,91)
9 PLS.
.0375
(0,95)
.250
10 9 8
7
6
5
1
3 2
4
(6,35)
C
C1
.500
OF
L
(12,7)
SWITCH
POLE
NO. 1
TWO POLE
.300 (7,62)
.110 (2,79) 5 PLS.
C
L
.428
(10,87)
C
C
L
OF
OF COMMON
L
10
9
8
7
6
5
1
STAND- TERMINAL
OFFS
4
3 2
C2
C1
Rotary
7
Grayhill, Inc.
•
561 Hillgrove Avenue
•
LaGrange, Illinois 60525-5997
•
USA
•
Phone: 708-354-1040
•
Fax: 708-354-2820
•
www.grayhill.com
Multi-Deck Rotary Switches
SERIES 71
0.5 to 0.75" Diameter, 1/4 Amp,
ConcentricShaft
FEATURES
• Two Switches in the Panel Space
of a Single Shaft Rotary
DIMENSIONS In inches (and millimeters)
Solder Lug Terminals: Style C
.312 .020
(7,92 0,51)
Rear Views
DIM. A .046 (1,17)
.687 .015
30° and 36° Angle of Throw may be
interposed on either shaft diameter.
(17,45 0,38)
DIA.
DIM. B REF.
STUD PROJECTION
.375 .020
(9,53 0,05)
30° Angle of Throw
C
L
.500 .015
(12,7 0,38)
DIA.
.250 .020
(6,35 0,05)
SEE
CHART
SEE
DETAIL
.562
.015
8
11
(14,27
0,38)
C
.250 + .001
–.002
(6,35 + 0,03
–0,05)
DIA.
.125 + .001
–.002 DIA.
(3,18 + 0,25
–0,05)
SECTION
B
SECTION
A
SEE NOTE
.094 .010
(2,39 0,25)
.750 .020
(19,05 0,51)
.219 .004
(5,56 0,10)
OVER TERMINALS
CONTROLLED
BY .125 (3,18)
DIA. SHAFT
CONTROLLED
BY .250 (6,35)
DIA. SHAFT
3/8-32UNEF-2A
THREAD
C
36° Angle of Throw
OF POSITION NO. 1
BUSHING KEYWAY
L
.066 .002 (1,68 0,05) WIDE BY
.036 .003 (0,91 0,08) DEEP
FROM A .375 (9,53) DIA.
C
.500 .015
(12,7 0,38)
DIA.
OF BUSHING KEYWAY
L
Approx.
Weight
Grams
SEE
DETAIL
No. of Decks
Sec. A Sec. B
Terminal Detail
Dimension A
Dimension B
1
2
3
1
2
3
1
2
3
1
1
1
2
2
2
3
3
3
1.415 (35,94)
1.633 (41,49)
2.131 (54,13)
1.633 (41,49)
2.131 (54,13)
2.349 (59,66)
2.131 (54,13)
2.349 (59,66)
2.567 (65,20)
.032 (0,81)
.032 (0,81)
.312 (7,92)
.032 (0,81)
.312 (7,92)
.312 (7,92)
.312 (7,92)
.312 (7,92)
.312 (7,92)
24
26
28
26
28
30
28
30
32
.034 .003
(0,86 0,08)
SEE NOTE
.750 .020
(19,05 0,51)
OVER TERMINALS
.068 .005
(1,73 0,13)
Note: Common location for a single pole per
deck switch. For common location on
multipole switches see circuit diagrams.
Angle C is 15° in 12 position switches and 36 ° in 10 position switches.
Grayhill part number and date code marked on detent cover label. Customer part number marked on request.
CIRCUIT DIAGRAMS: Solder Lug Terminals
Switch is Viewed From Shaft End and Shown in Position No. 1.
Note: All common terminals are located above base terminals as shown.
C OF
BUSHING
KEYWAY
C5
9
C3
9
C4
10
L
9
10
9
9
10
10
10 C6
11
11
2
8
8
11
8
8
11
11
8
7
C3
7
C4
7
12
1
12
1
7
C2
12
7
6
12
12
30° Angle
of Throw
C
C
C
C1
C
L
L
L
L
6
6
6
6
C1
C1
1
1
C1
1
C1
5
5
5
5
5
2
2
2
2
C3
4
C2
3
4
3
ONE POLE
3
3
4
4
3
TWO POLE
4
C2
FIVE OR SIX POLE
C2
FOUR POLE
THREE POLE
C OF
L
BUSHING
KEYWAY
7
8
7
8
2
C2
5
6
9
9
6
4
36° Angle
of Throw
10
C
5
C1
L
10
1
4
1
C1
3
3
2
ONE POLE
TWO POLE
ADD-A-POTSWITCHES
Contact Grayhill for Series 71 Concentric Add-A-Pot or Add-A-Switch type switches.
Rotary
8
Grayhill, Inc. • 561 Hillgrove Avenue • LaGrange, Illinois 60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com
Multi-Deck Rotary Switches
DIMENSIONS In inches (and millimeters)
Rear Views
PC Mount: Style CF
30° and 36° Angle of Throw may be
interposed on either shaft diameter.
.875 (30°)
.725 (36°) .015
(22,23, 18,42
0,38)
30° Angle of Throw
DIM. A
DIM. B REF.
.500 .015
(12,7 0,38)
DIA.
.312 .020
(7,92 0,51)
STUD PROJECTION
.687 .015
(17,45 0,38)
.375 .020
(9,53 0,05)
DIA.
SECTION
SECTION
B
A
.250 .020
(6,35 0,05)
.156 .010
(3,96 0,25)
TYP.
.368 (9,35)
REF.
.562
.015
(14,27
0,38)
.250 + .001
.125 + .001
–.002 DIA.
(3,18 + 0,25
–0,05)
–.002
(6,35 + 0,03
–0,05)
.125 .010
(3,18 0,25)
TYP.
SEE
NOTE
DIA.
.037 .005
(0,94 0,13)
TYP.
POSITION
.015
.002
(0,38
0,05)
NO. 1
.020 .003
(0,51 0,08)
TYP.
SEE NOTE
BELOW
3/8-32 UNEF-2A
THREAD
.075 .005
(1,91 0,13)
TYP.
C
L
C C
L L
SEE SOLDER LUG
.110 .010
(2,79 0,25)
TYP.
VERSION FOR
SHAFT FLATS AND
DIMENSIONS
C
L
36° Angle of Throw
.656
.412 .010
.500 .015
(12,7 0,38)
DIA.
(16,66)
(10,46 0,25)
TYP.
C
C
L
L
For additional dimensions and references
for shafts, flat orientation and bushing
keyway, see drawings for styles 71AF and
71BF.
COMMON
DECK 1
COMMON
DECK 1
SECTION A
SECTION B
.156 .010
(3,96 0,25)
TYP.
.368 (9,35)
REF.
Approx.
Weight
Grams
No. of Decks
Sec. A
Sec. B
Dimension A
Dimension B
1
2
3
1
2
3
1
2
3
1
1
1
2
2
2
3
3
3
1.415 (35,94)
1.633 (41,49)
2.131 (54,13)
1.633 (41,49)
2.131 (54,13)
2.349 (59,66)
2.131 (54,13)
2.349 (59,66)
2.567 (65,20)
.032 (0,81)
.032 (0,81)
.312 (7,92)
.032 (0,81)
.312 (7,92)
.312 (7,92)
.312 (7,92)
.312 (7,92)
.312 (7,92)
24
26
28
26
28
30
28
30
32
.125 .010
(3,18 0,25)
TYP.
SEE
NOTE
.037 .005
(0,94 0,13)
TYP.
.075 .005
(1,91 0,13)
TYP.
C C
L L
Note: Common location for a Single Pole Per
Deck Switch. For common location on
multipole switches see circuit diagrams.
Grayhill part number and date code marked on detent cover label. Customer part number marked on request.
CIRCUIT DIAGRAMS: PC Mount Terminals
Switch is Viewed From Shaft End and Shown in Position No. 1.
Note: All common terminals are located above base terminals as shown.
36° Angle of Throw
30° Angle of Throw
C
L
OF BUSHING
KEYWAY OR
FLATS
C
OF BUSHING
KEYWAY OR
FLATS
L
C
C
L
L
12 11 10
9
8
7
6
5
4
2
3
C1
1
12 1110
C2
9
8
7
6
5
4
3
2
1
10
9
8
7
6
5
1
3 2
4
10 9 8
7
6
5
1
3 2
4
C1
C1
C2
C1
ONE POLE
TWO POLE
ONE POLE
TWO POLE
Rotary
9
Grayhill, Inc.
•
561 Hillgrove Avenue
•
LaGrange, Illinois 60525-5997
•
USA
•
Phone: 708-354-1040
•
Fax: 708-354-2820
•
www.grayhill.com
Multi-Deck Rotary Switches
SPECIFICATIONS
Military Shaft and Panel Seal
Military Qualification MIL-DTL-3786/39
The military style of the Series 71 rotary switch switchwithoutincreasingthenumberofoperative
is qualified to MIL-DTL-3786/39. Complete decks.
A shaft and panel seal is available to provide
watertight mounting of the Series 71 standard
military style rotary switches. Sealing is
accomplished by an O-ring shaft seal and a
panel seal washer. Panel seal dimension
differences are shown in the dimensional
drawings.Whenthepanelsealiscompressed,
dimensions are approximately the same as an
unsealed switch. If the non-turn washer
supplied with the switch is used, it should not
be allowed to extend entirely through the
panel when mounting a sealed switch.
However, the bushing may be used as a non-
turn device instead. Switches are provided
with a double flat bushing in styles which
include the letter A and with a bushing which
has a keyway in the styles which include the
letter B.
electrical rating information is listed on the
following page. The Series 71 rotary switch Another difference in the standard and military
qualificationincludesthe30°andthe36°angles styles is the mounting hardware. Ordered as
of throw, in .125" (3,18) and .250" (6,35) options with a standard style switch these items
diameter shafts, with solder lug terminals and are included with the military style switch: non-
printedcircuitterminals,insealedandunsealed turn washer with solder lug style and a non-turn
style switches. Standard variations such as washer plus a mounting bushing washer with
shaft and/or bushing length, etc. that do not the PC terminal style.
affect the switch performance can also be
marked as qualified product. Contact Grayhill Complete specification drawings are available
for complete details.
from Grayhill, Inc. for the standard military
qualified products. Military qualified Series 71
rotary switches may be ordered by the “M”
number listed in Military Specification Sheet/39
orbyGrayhillpartnumber. Allqualifiedswitches
will be marked to the specification.
Dimensionally the military style is the same as
the standard style with the exception of the PC
version of 3 or 4 decks; a spacer deck between
decks 2 and 3 adds another deck length to the
SPECIFICATIONS: Materials and Finishes
MaterialsandFinishes
Standard Style
Cover: Diallyl per (MIL-M-14) ASTM-D-
5948 except for 71 BT (see bushing).
Base and Deck Separator: Diallyl per
(MIL-M-14) ASTM-D-5948
Rotor Mounting Plate: Thermoplastic
Bushing: Zinc casting, tin/zinc-plated.
Through Bolts and Nuts, Shaft and Rear
Support Plate, Stop Pins and Stop Arm
(All Others): Stainless steel
Shaft, Stop Plates, Stop Arm (71BT):
Reinforced thermoplastic
Detent Rotor: Reinforced thermoplastic for
71BT; phenolic per (MIL-M-14) ASTM-D-
5948 for all others
Detent Balls: Steel, nickel-plated
Detent Springs: Tinned music wire
Rotor Contact: Silver alloy and beryllium
copper
Base Contacts, Common Plate and
Terminals: Brass, Gold plate .000005"
minimum over Silver plate .00005" over
nickel .00002".
Detent Rotor: Phenolic per (MIL-M-14)
ASTM-D-5948
Mounting Hardware: One mounting nut and
one internal tooth lockwasher are supplied with
each switch. For switches with A in the style
description, the nut is .062" (1,57) thick by
.312" (7,92) across flats. For switches with B or
C in the style description, the nut is .094" (2,39)
thick by .562" (14,27) across flats. Nuts are
brass, tin/zinc-plated or stainless steel.
Mounting Hardware: One mounting nut and
one internal tooth lockwasher are supplied
with each Series 71 switch. For switches with
Style A in the description, the nut is .062"
(1,57) thick by .312" (7,92) across flats. For
switches with Style B or C in the description,
the nut is .094" (2,39) thick by .562" (14,27)
across flats. Nuts are brass, tin/zinc-plated or
stainless steel.
Additional Hardware: Each switch is
supplied with a non-turn washer to use if
desired. Additionally, each PC mount switch
is supplied with a mounting bushing washer
(see PC Mount Accessory). For switches
with Style A in the description, non-turn
washer is stainless steel; for switches with
Style B in the description, non-turn washer is
stainless steel. Mounting bushing washer
(PC Mount Accessory) is brass, tin/zinc-
plated.
Materials and Finishes
Military Qualified
Cover, Base and Deck Separator: Diallyl per
(MIL-M-14) ASTM-D-5948
Rotor Mounting Plate: Thermoplastic
Bushing: Zinc casting, tin/zinc-plated
Through Bolts and Nuts, Shaft Extension,
Lockwashers, Shaft and Rear Support
Plate, Stop Pins and Stop Arm (All
Others): Stainless steel
Detent Balls: Steel, nickel-plated
Detent Springs: Tinned music wire
Rotor Contact: Silver alloy and beryllium
copper
Front Support Plate (71 BT only):
Tempered steel, tin/lead-plated.
Interdeck Seal (71 BT Only): Silicone
Extension: Brass, unplated
Base Contacts, Common Plate and Terminals:
Brass, goldplate.000005"minimumoversilver
plate .00005" over Nickel .00002".
Rotary
10
Grayhill, Inc.
• 561 Hillgrove Avenue • LaGrange, Illinois 60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com
Multi-Deck Rotary Switches
SPECIFICATIONS: Electrical Ratings, Others
Electrical Ratings
General
Electrical Ratings
Standard Style
Charts: Charts shown are for non-shorting
(breakbeforemake)contacts. Measurements
weremadeat25°Cand68%relativehumidity.
The load life curves show the number of
rotational cycles which can be expected for
the voltage, current and type of load. Thus,
for a standard style switch with a 300
milliampere 115 Vac resistive load, the
expected life is 15,000 cycles. Reducing the
load to 200 milliamperes increases the life to
25,000 cycles. Life limiting or failure criteria
are listed in the rating sections which follow.
Cycles: A cycle is a 360° rotation and a return
through all switch positions to the starting
position.
ContactResistance:50milliohmsmaximum
after life.
Curves are based on the following failure
criteria:
Contact Resistance: 50 milliohms maximum
(20 milliohms initially).
Insulation Resistance: 1,000 megohms
minimumbetweenterminalsandshaft. (50,000
megohms initially).
Voltage Breakdown: 500 Vac minimum
between mutually insulated parts.
Current Rating: These switches will carry 4
amperes with a maximum contact temperature
rise of 20°C. If the life limiting characteristics
are less critical than those shown above, if
elevated temperatures or reduced pressures
are involved, Grayhill can predict the switch
life for the application.
Insulation Resistance: 1,000 megohms
minimum between terminals and shaft.
Dielectric Strength: 500 Vac (atmospheric
pressure) and 350 Vac (reduced pressure)
between mutually insulated parts.
The Series 71 also meets the requirements
of MIL-DTL-3786/39 for moisture resistance,
stop strength, rotational torque, vibration (10
through 2,000 cps), medium and high shock,
salt spray, explosion, thermal shock (-65°C
to85°C)andterminalpull. Whentestedatsea
level, 25°C and 68% relative humidity with
failure criteria of 50 milliohms maximum
Voltage: As listed in charts.
Meet the Following Requirements of MIL- contact resistance and 500 Vac breakdown
DTL-3786: Moisture Resistance: Medium and voltage, these switches will make and break
High Shock; Vibration (10 to 2,000 cps); 250 milliamps at 28 Vdc inductive (250
Thermal Shock (-65°C to 85°C); Salt Spray, millihenries)500milliampsat28Vdcresistive:
Standard
600
500
400
300
200
100
VOLTAGE 115 VAC
OR 30 VDC
RESISTIVE
Explosion; and Stop Strength (10 in-lb).
500 milliamps at 115 volts Vac, 60 hertz
resistive, for 10,000 cycles of operation.
Electrical Ratings
Military Style
Curves are based on the following failure
criteria:
10
25
50
Additional Characteristics
Standard and Military Styles
Rotational Torque: 4-32 ounce-inches, (28-
CYCLES x 1000
VOLTAGE 30 VDC
INDUCTIVE
(250 MILLIHENRIES)
Qualified to the following MIL-DTL-3786/39 230 N•mm) depending on the number of
circuit values: (also see standard style poles per deck and the number of decks.
description.) The Series 71 has been tested to Contacts: Shorting or non-shorting wiping
meet the requirements of MIL-DTL-3786, Style contacts with over 100 grams of contact
SR39, the majority of which are listed here. At force.
85°C approximately 68% relative humidity and ShaftFlatOrientation:Oppositefirstposition
sea level pressure, the switches have been pole no. 1 (See Circuit Diagrams).
tested to make and break the following loads, Terminals: Switches are provided with full
as stated in MIL-DTL-3786/39: 125 circle of terminals regardless of the number
milliamperes at 28 Vdc resistive; 75 of active positions.
250
200
150
100
50
10
25
50
CYCLES x 1000
Military
VOLTAGE 115 VAC
OR 30 VDC
800
700
600
500
400
300
200
100
RESISTIVE
milliamperes at 115 Vac resistive.
Extended Studs: Switches of 6 or more
decks (or concentric switches of 4 or more)
The switches have also been tested at reduced have longer studs and extra stud nuts for
barometric pressure (70,000 feet), 25°C at recommended double end mounting. Stud
10
25
50
1
approximately 68% relative humidity to make hole size is /16" diameter for #0-80 NF-2A
CYCLES x 1000
and break the following loads as stated in MIL- thread.
DTL-3786/39:50milliamperes,28Vdcresistive; Stop Strength: 10 pound-inches.
VOLTAGE 30 VDC
INDUCTIVE
(250 MILLIHENRIES)
250
200
150
100
50
20 milliamperes, 115 Vac resistive. When
Mounting Bushing Strength: 10 pound-
tested to the above loads at stated conditions, inches.
the Series 71 switches meet the following life-
limiting criteria after 25,000 cycles of operation
in accordance with MIL-DTL-3786/39.
10
25
50
CYCLES x 1000
Rotary
11
Grayhill, Inc.
•
561 Hillgrove Avenue
•
LaGrange, Illinois 60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com
Multi-Deck Rotary Switches
ADJUSTABLE STOPS
Set and Reset Stops to Limit Rotation
Form, Fit, Function Equivalent to Fixed Stop Styles
The adjustable stop Series 71 rotary switches allow you to
change the number of positions per pole. Simply remove
and relocate stop pins in the holes in the front of the switch.
The pins are held in place by a self adhesive sticker which
fits over the front plate.
This feature is available in the Series 71 single shaft
standard switches with either 1/8" or 1/4" diameter shafts
with either PC or solder lug terminals. It is not available in
military qualified or concentric shaft styles.
All dimensions, ratings and characteristics are the same as
the fixed stop equivalent. The chart shown here describes
the adjustable stop style substitutions for the fixed stop
styles. Although Series 71 is not an exact dimensional
equivalent of the fixed stop styles of Series 8 and 9, it most
nearly represents a functional substitution.
STOP PIN HOLES
STOP PINS
Fixed Stop
Style
Adjustable Stop
Substitution
STICKER
08A
09A
71AD
71AD
71A
71AD
71AF
71ADF
71B
71BD
71BF
71E
71BDF
71ED
71EF
71EDF
SHAFT AND PANEL SEAL
SHAFT “O” RING
PANEL SEAL
The shaft is sealed by an O-ring inside the bushing. The
panel is sealed by an O-ring at the base of the bushing.
The seals do not alter the dimensions as shown in the
drawings when the switch is mounted.
The panel seal is silicone rubber. The shaft seal is an O-ring
per MIL-P-5516B.
Rotary
12
Grayhill, Inc.
• 561 Hillgrove Avenue • LaGrange, Illinois 60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com
Multi-Deck Rotary Switches
ACCESSORIES: Non-Turn Washers In inches (and millimeters)
1/8" and 1/4" Diameter Shaft Switches
.625 .010 DIA.
(15,89 0,25)
The bushing of the Series 71 switch is designed so the switch will not turn
if the panel has been cut to fit the exact bushing shape. The bushing for
the /8" diameter shaft switch has a double flat; the /4" diameter shaft
switch has a keyway in the bushing. An alternate means of keeping the
switches from turning is to mount them with optional, non-turn washers.
.032 .002
(0,81 0,05)
1
1
90˚ 1˚
.437 + .010 –.000
(11,10 + 0,25 –0,00)
Part number 50J1066 is made of Stainless Steel. It is supplied with
military switches with Style A in the description. When ordered for
standard product, a like number of switches must be ordered.
.005 .003
(0,38 0,08)
RADIUS
C
L
.125 .010
(3,16 0,25)
Part number 12C1087-1 is Brass, tin/zinc-plated and may be ordered for
standard product.
.120 .003
(3,05 0,08)
PART NO. 12C1087-1
PartnumberSHH694-5isStainlessSteelwashersuppliedwithallmilitary
style switches with Style B in the description.
STANDARD
.400
.005
DIA.
(10,16
0,13)
.625 .010 DIA.
(15,89 0,25)
.025
.001
(0,64
.032 .005
(0,81 0,13)
0,03)
90° 1°
90° 1°
.250 .003
(6,35 0,08)
.015
(0,38)
RADIUS
.375 .005
(9,53 0,13)
.015 (0,38)
RADIUS
MAX.
MAX.
.125
C
L
.060 .001
(1,52 0,25)
.005
(3,16
.125 .005
(3,16 0,13)
.125 .002
(3,18 0,05)
0,13)
PART NO. 50J1066
PART NO. SHH694-5
MILITARY
MILITARY AND STANDARD
FOR 1/8" DIAMETER SHAFT
FOR 1/4" DIAMETER SHAFT
4mm Diameter Shaft Switches
11,13
0,13
DIA.
0,64
0,05
Non-Turn Washer
For styles E, ED, EF and EDF.
Mounting bushing washer provides non-turn
feature.
302 Stainless Steel.
Part No. 71 J1103. Contact Grayhill for price.
90˚ 1˚
.015
(0,38)
RADIUS
MAX.
C
L
5,08
0,05
2,36
0,13
1,57 0,08
Rotary
13
Grayhill, Inc.
• 561 Hillgrove Avenue • LaGrange, Illinois 60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com
Multi-Deck Rotary Switches
CHOICES AND LIMITATIONS: Series 71
A = 1/8" Diameter Shaft
F = PC Mount Terminals
C = Concentric Shaft
B = 1/4" Diameter Shaft
T = PC Mount Terminals and Process Sealed
Switching Decks & Bushing; no panel seal
M = Military
2 Switches with same Style and Angle of
Throw, one behind the other.
Limits below apply to either switch section
(A or B).
E = Metric Mount Shaft & Bushing
D = Adjustable Stops (Adj. Stop)
S = Shaft and Panel Seal (S/P Seal)
All switches without F or T have solder lugs
Style Choices
With S/P Seal
Angle of
Throw
No. Of
Decks
Poles
Per Deck
Positions
Per Pole1
Shorting Or
Non-Shorting
Basic Style
Adj. Stop
01 thru 12
01 thru 08
01 thru 05
01 thru 04
01 thru 03
01 or 02
1
2
3
02 thru 123
02 thru 06
02 thru 04
02 or 03
02
N or S
N or S
N or S
N or S
N or S
N or S
30°
4
55
65
A
B
E
AS
BS
ES
AD
BD
ED
02
01 thru 12
01 thru 08
1
2
02 thru 103
02 thru 05
N or S
N or S
36°
30°
36°
36°
01 thru 12
01 thru 08
1
2
02 thru 123
02 thru 06
N or S
N or S
AF
BF
EF
ASF
BSF
ESF
ADF
BDF
EDF
01 thru 12
01 thru 08
1
2
02 thru 103
02 thru 05
N or S
N or S
01 thru 05
01 thru 05
1
2
02 thru 103
02 thru 05
N or S
N or S
BT
——
——
01 thru 054
01 thru 054
01 thru 054
01 thru 044
01 thru 024
1
2
3
4
6
02 thru 123
02 thru 06
02 thru 04
02 or 03
02
N or S
N or S
N or S
N or S
N or S
30°
MA
MB
MAS
MBS
——
——
01 thru 054
01 thru 054
1
2
02 thru 103
02 thru 05
N or S
N or S
36°
30°
36°
01 thru 042,4
01 thru 042,4
1
2
02 thru 123
02 thru 06
N or S
N or S
MAF
MBF
MASF
MBSF
——
——
01 thru 042,4
01 thru 042,4
1
2
02 thru 103
02 thru 05
N or S
N or S
01 thru 03
01 thru 03
01 or 02
01
01
01
1
2
3
4
5
6
02 thru 123
02 thru 06
02 thru 04
02 or 03
02
N or S
N or S
N or S
N or S
N or S
N or S
30°
C
——
——
——
——
02
01 thru 03
01 thru 03
1
2
02 thru 103
02 thru 05
N or S
N or S
36°
01 thru 03
01 thru 03
1
2
02 thru 123
02 thru 06
N or S
N or S
30°
36°
CF
01 thru 03
01 thru 03
1
2
02 thru 103
02 thru 05
N or S
N or S
4
1 For Adjustable Stop styles (with the letter D), length; but use only the number of operative
In addition to qualified types (Solder lug–5
decks; PC mount–4 decks), Grayhill can pro-
use AJ instead of number of positions when
ordering.
decks when creating the part number.
3 For 1-pole switches with maximum positions, vide switches with additional decks in the
2 Military Qualified PC mount switches of 3 or specify Fixed stop after last position or materials of the ‘M’ style. Contact Grayhill.
5
4 operative decks have an additional spacer Continuous rotation when ordering. (Note: 1 p,
Switches in 30° throw with 5 or 6 poles per
deck after deck 2. Use total decks to calculate
71BT, 10 positions, is available only as deck are not available with adjustable stops.
Continuous).
Rotary
14
Grayhill, Inc.
• 561 Hillgrove Avenue • LaGrange, Illinois 60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com
Multi-Deck Rotary Switches
ORDERING INFORMATION: Single Shaft Switches
Series
Style*: Letter(s) from the Choices and Limitations chart
Angle of Throw: 30° or 36°
Number of Decks: As limited by Choices and Limitations chart
71A30–02–1–12N–C
Stop Arrangement: Use suffix only when ordering 1 pole with
maximumpositions.
C = Continuous rotation; F = Stop between last and first positions
Type of Contacts: N = Non-shorting; S = Shorting
Positions Per Pole: 02 to 12 per Choices chart.
For adjustable stop switches (D) use AJ here.
Poles Per Deck: As limited by the Choices chart
*AllrotaryswitchesthatarerequiredtohavemilitarydesignatedmarkingsandtestingadheringtoMIL-DTL-3786
are to be ordered by specifying the military part number identified on the appropriate slash sheet.
ORDERING INFORMATION: Concentric Shaft Switches
EntireSwitch
Series and Style: 71C or 71CF
Angle of Throw: 30° or 36°. Both switch sections will be the same.
Switch Section A (Front Switch)
Number of Decks: 1 to 3, per Choices and Limitations chart
Poles Per Deck: As limited by the Choices and Limitations chart
Positions Per Pole: 02 to 12 per Choices and Limitations chart
Type of Contacts: N = Non-shorting; S = Shorting
Stop Arrangement: Use suffix only when ordering 1 pole with
maximumpositions.
C = Continuous rotation; F = Stop between last and first positions
71C362110NC–3202S
Switch Section B (Rear Switch)
Stop Arrangement: Use suffix only when ordering 1 pole with
maximumpositions.
C = Continuous rotation; F = Stop between last and first positions
Type of Contacts: N = Non-shorting; S = Shorting
Positions Per Pole: 02 to 12 per Choices and Limitations chart.
Poles Per Deck: As limited by the Choices and Limitations chart
Number of Decks: 1 to 3, per Choices and Limitations chart
Available from your local Grayhill Distributor.
For prices and discounts, contact a Local Sales
Office,anauthorizedlocalDistributororGrayhill.
Rotary
15
Grayhill, Inc.
•
561 Hillgrove Avenue
•
LaGrange, Illinois 60525-5997
•
USA
•
Phone: 708-354-1040
•
Fax: 708-354-2820
•
www.grayhill.com
71MA30-01-1-07S 相关器件
型号 | 制造商 | 描述 | 价格 | 文档 |
71MA30-01-1-12N | GRAYHILL | Rotary Switch, 12 Positions, SP12T, Latched, 0.125A, 28VDC, Solder Terminal, Shaft Type Actuator, Panel Mount-threaded, ROHS COMPLIANT | 获取价格 | |
71MA30-01-1-12N-C | GRAYHILL | Rotary Switch, 12 Positions, SP12T, Latched, 0.125A, 28VDC, Solder Terminal, Shaft Type Actuator, Panel Mount-threaded, ROHS COMPLIANT | 获取价格 | |
71MA30-01-1-12S | GRAYHILL | Rotary Switch, 12 Positions, SP12T, Latched, 0.125A, 28VDC, Solder Terminal, Shaft Type Actuator, Panel Mount-threaded, ROHS COMPLIANT | 获取价格 | |
71MA30-01-1-12S-C | GRAYHILL | Rotary Switch, 12 Positions, SP12T, Latched, 0.125A, 28VDC, Solder Terminal, Shaft Type Actuator, Panel Mount-threaded, ROHS COMPLIANT | 获取价格 | |
71MA30-01-1-12S-F | GRAYHILL | Rotary Switch, 12 Positions, SP12T, Latched, 0.125A, 28VDC, Solder Terminal, Shaft Type Actuator, Panel Mount-threaded, ROHS COMPLIANT | 获取价格 | |
71MA30-01-2-04N | GRAYHILL | Rotary Switch, 4 Positions, DP4T, Latched, 0.125A, 28VDC, Screw Terminal, Shaft Type Actuator, Panel Mount, ROHS COMPLIANT | 获取价格 | |
71MA30-01-2-06S | GRAYHILL | Rotary Switch, 6 Positions, DP6T, Latched, 0.125A, 28VDC, Solder Terminal, Shaft Type Actuator, Panel Mount-threaded, ROHS COMPLIANT | 获取价格 | |
71MA30-01-3-02N | GRAYHILL | Rotary Switch, 2 Positions, 3PDT, Latched, 0.125A, 28VDC, Solder Terminal, Shaft Type Actuator, Panel Mount-threaded, ROHS COMPLIANT | 获取价格 | |
71MA30-01-3-04N | GRAYHILL | Rotary Switch, 4 Positions, 3P4T, Latched, 0.125A, 28VDC, Solder Terminal, Shaft Type Actuator, Panel Mount-threaded, | 获取价格 | |
71MA30-01-4-03S | GRAYHILL | Rotary Switch, 3 Positions, 4P3T, Latched, 0.125A, 28VDC, Solder Terminal, Shaft Type Actuator, Panel Mount-threaded, ROHS COMPLIANT | 获取价格 |
71MA30-01-1-07S 相关文章
- 2024-09-20
- 6
- 2024-09-20
- 9
- 2024-09-20
- 8
- 2024-09-20
- 6