72-UMM-H [GRAYHILL]
CONTROLLERS MicroDAC LT (Optomux); CONTROLLERS MicroDAC LT （ Optomux ）
| 型号： | 72-UMM-H |
| 厂家： | 
GRAYHILL, INC |
| 描述： | CONTROLLERS MicroDAC LT (Optomux) |
| 文件： | 总2页 (文件大小：773K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
System 50
CONTROLLERS
MicroDAC LT (Optomux)
FEATURES
• Each Unit Controls/Monitors up to
32 Analog (G5 Only) and/or Digital
I/O Modules
• Executes On-Board Programs
Created With Borland C
• Network up to 64 MicroDAC LTs
per Host Serial Port, Spanning as
Much as 4000 Feet
• Communicate Over RS-422 /485 at
Speeds From 1200 Baud to
115.2 KB
• 100% Optomux Compatible, With
ExpandedCommandSet
• I/O Update Rates of 500 µSec per
32 Digital I/O, and 10 mS per
Analog Input or 2 Analog Outputs
• 64-Bit Floating Point Math
APPLICATIONS
and control the outputs. In addition to simple Even while an Embedded Control Program
ON/OFF instructions, commands are included (ECP) is running on MicroDAC LT, any
which permit you to:
Optomux™ command it receives from the host
will be processed as usual, which allows you to
• Sample analog signals at 10 mS per input
• Flag values above or below prescribed levels delegate some or all of the control and data
• Capture min/max values
acquisitionresponsibilityfromthehostcomputer.
This reduces communications time and
improves system response.
• Calculate the average input signal levels
• Provide linearized thermocouple and
RTD temperature values
• Determine the width of input pulses
• Count pulses at frequencies up to 1000Hz
• Detect rising or falling edges
For embedded or stand-alone applications,
downloaded ECP routines can be initiated on
power-up.
• Latch momentary input events
• Set the level of analog outputs
• Provide delayed-on or delayed-off outputs
Libraries and the appropriate download utility
are included with the ECP Programmers
Manual.
GENERALDESCRIPTION
MicroDAC LT is a low cost version of MicroDAC
for customers who don't need all of the features
of MicroDAC. Missing are the battery back-up
for the RAM memory, real-time clock, RS-232,
and SBX ports. The DIN Rail Mountable metal
enclosure is optional. ECP routines written for
MicroDAC can be easily transferred to
MicroDAC LT and vice versa. By combining
MicroDAC, MicroDAC LT and ProMux the
cost/performance of a distributed control or
data acquisition network is optimized for price
and performance.
COMMUNICATIONS
The host computer and MicroDAC LT(s)
communicate serially over one or two pair of
twisted wires per RS-422/485 in a multi-drop
configuration. They use Optomux™ ASCII
format to code the command and the response
messages. Application programs running on
the host computer issue commands and then
await responses from the MicroDAC. The
communications speed is selectable between
1.2 and 115.2 KBaud. Each controller on the
network is assigned a unique base address.
The entire network can span 4000 feet.
SOFTWARE
Software drivers are available which simplify
the task of interfacing host programs written in.
Visual Basic or C to the MicroDAC network.
Sample programs, set-up and debug utilities
are included on the disk with the drivers.
Interface drivers for most third party software
packages are available through their
distributors. Our MicroDAC DDE Server
dramatically simplifies data sharing between
MicroDACs and Windows applications, such
as Microsoft Excel (see Controller Software).
Our DLL will assist you in building custom
ANALOG & DIGITAL I/O
MicroDAC LT connects directly to any 8,16,24,
or 32 module mounting rack with a 50-pin EMBEDDEDCONTROLPROGRAMS
Windows Man-Machine Interfaces or control
By specifying MicroDAC LT(s) with the optional programs using Visual Basic, Visual C/C++, or
64KB of flash memory, you can develop and Borland compilers.
download C language programs to any of the
header. If connected to a G5 rack, any
combination of analog and digital I/O modules
may be used. Standard and Mini racks permit
onlyacombinationofdigitalmodules.MicroDAC
LTs can be networked to a host PC which
executeprogramsthatmonitortheinputsignals
1Withoptionalenclosure.
networked controllers.
System 50
3 1
Grayhill, Inc. • 561 Hillgrove Avenue • LaGrange, Illinois 60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com
System 50
DIMENSIONS In inches (and millimeters)
STANDOFF I.D.
0.15 (3,8) DIA.
CLEARANCE
0.725
(18,42)
4.975
(126,37)
FOR #6 SCREW
ATTACHES TO
35 MM DIN RAIL
EN50022
+5V
GND
FH+
FH-
TH+
TH-
FO+
FO-
TO+
TO-
3.000
(76,2)
4.25
(107,95)
2.80
(71,12)
.758
(19,25)
0.725
(18,42)
0.20
(5,08)
.758
(19,25)
4.875
(123,83)
0.625
(15,88)
1.385
(35,18)
2.20
(55,9)
PLUG CONNECTOR
MATES DIRECTLY
WITH A RACK
Unless otherwise specified, tolerances are .010 (0,25).
SPECIFICATIONS
ORDERINGINFORMATION
Power Supply: 4.75 to 5.25 Vdc
Supply Current (less modules): 300 mA
Operating Temperature: 0 to 70°C
Humidity: 95% non-condensing
Microprocessor: V25 @ 10 MHz
Housing Material: Painted steel
Connections:
Part Number
Description
MicroDAC LT Controllers
72-MDL-32ADC
Analog/Digital with 64K flash for C ECP storage
MicroDAC LT User's Manuals and Software
RS-422/485: 10 position terminal block
72-UMM
Introduction to MicroDAC
Rack: 50-pin female plug
72-UMM-D
72-UMM-DDE
72-UMM-DLL
72-UMM-DLL32
72-UMM-E
Driver development and protocol definition. Includes driver source code
Optomux DDE Server for Windows 3.1
Optomux DLL for Windows 3.1
Optomux DLL for Windows 95/98/NT
C language ECP manual with libraries
Serial Data:
Format: 10-Bit ASCII, 1 Start, 1 Stop, 8 Data
Integrity: Message Checksum or 4 Pass + CS
Range of Network: Compliant with EIA/TIA
RS485-A (1 standard load per controller).
Operates in multi-drop mode. 64 DIP switch
selectable addresses. May require RS485
repeaters for lengths over 4000 feet or more
than 32 controllers. Consult factory for special
configurations.
72-UMM-H
72-UMM-IL
Programmers manual with Basic and C host drivers & examples
Hardware installation and set-up. Includes set-up and debug programs
Available from your local authorized Gray-
hill Distributor.
For prices and discounts, contact your local
sales office, an authorized Distributor, or
Grayhill.
System 50
3 2
Grayhill, Inc.
• 561 Hillgrove Avenue • LaGrange, Illinois 60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com
相关型号：
72.3-.5%-FA1A-20PPM-TANDR
Fixed Resistor, Wire Wound, 1W, 72.3ohm, 44V, 0.5% +/-Tol, -20,20ppm/Cel,
VISHAY
72.3-.5%-FA3A-20PPM-TANDR
Fixed Resistor, Wire Wound, 3W, 72.3ohm, 130V, 0.5% +/-Tol, -20,20ppm/Cel,
VISHAY
72.3-.5%-FA7A-20PPM-AMMOPACK
Fixed Resistor, Wire Wound, 7W, 72.3ohm, 490V, 0.5% +/-Tol, -20,20ppm/Cel,
VISHAY
72.3.5%FA3/420PPM-AMMOPACK
Fixed Resistor, Wire Wound, 0.75W, 72.3ohm, 32V, 0.5% +/-Tol, -20,20ppm/Cel,
VISHAY
©2020 ICPDF网 联系我们和版权申明