75AF36-01-1-09N-F [GRAYHILL]
Rotary Switch, 9 Positions, Maintained, 0.2A, 30VDC, Solder Lug Terminal, Rotary Screw Actuator, Panel Mount,;型号: | 75AF36-01-1-09N-F |
厂家: | GRAYHILL, INC |
描述: | Rotary Switch, 9 Positions, Maintained, 0.2A, 30VDC, Solder Lug Terminal, Rotary Screw Actuator, Panel Mount, 开关 |
文件: | 总2页 (文件大小:61K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Single Deck Rotary Switches
SERIES 75
0.3" Diameter, 200 mA
FEATURES
• Small Size
• Flush, Shafted, or Knobbed Shaft
DIMENSIONS In inches (and millimeters)
Screwdriver Actuated
.298 ± .010
(7,57 ± 0,25)
DIA.
.539 ± .020
(13,69 ± 0,51)
.489 ± .020
(12,42 ± 0,51)
.109 ± .010
(2,77 ± 0,25)
.109 ± .010
(2,77 ± 0,25)
.032 (0,81)
REF.
SHOULDER
DIAMETER
Ø .031 ± .002
(0,79 ± 0,05)
.020 ± .005
(0,51 ± 0,13)
.125 ± .005
(3,18 ± 0,13)
8
Rear view shown
on next page.
TERMINAL
DIAMETER
Ø .015 ± .002
(0,38 ± 0,05)
Style AP
Style AF
All dimensions not shown and
front views same as style AP.
SCREWDRIVER SLOT
.032 ± .010
(0,81 ± 0,25) DEEP
.500 ± .020
.250
(12,7 ± 0,51)
± .015
(6,35
± 0,38)
.109 ± .010
(2,77 ± 0,25)
Shaft Actuated
.375 ± .015
(9,53 ± 0,38)
.032 (0,81)
REF.
SHOULDER
.250
± .015
(6,35
DIAMETER
Ø .031 ± .002
(0,76 ± 0,05)
± 0,38)
.298 ± .010
(7,57 ± 0,25)
DIA.
Rear view shown
on next page.
.203 ± .003
(5,16 ± 0,08)
ACROSS FLATS
OF BUSHING
Ø .125 + .001/ - .002
(3,18 + 0,03/ - 0,51)
TERMINAL
Style BP
1/4-32 UNF-2A
THREAD
DIAMETER
Ø .015 ± .002
(0,38 ± 0,05)
108°
.550 ± .020
(13,97 ± 0,51)
C
.109 ± .010
(2,77 ± 0,25)
L
OF
POSITION 1
.094 ± .015
(2,39 ± 0,38)
Rear view shown
on next page.
All dimensions not shown and
front views same as style BP.
Style BF
Integral Knob Actuated
.298 ± .010
(7,57 ± 0,25)
DIA.
.539 ± .020
(13,69 ± 0,51)
.489 ± .020
(12,42 ± 0,51)
.109 ± .010
(2,77 ± 0,25)
.109 ± .010
(2,77 ± 0,25)
.032 (0,81)
REF.
SHOULDER
DIAMETER
Ø .031 ± .002
(0,76 ± 0,05)
.115 ± .010
(2,92 ± 0,25)
Rear view shown
on next page.
C
OF
L
TERMINAL
POSITION 1
DIAMETER
Ø .015 ± .002
(0,38 ± 0,05)
Style CP
Style CF
All dimensions not shown and
front views same as style CP.
Grayhill part number and date code marked on label.
Customer part number marked on request.
Grayhill, Inc.
•
561 Hillgrove Avenue
•
LaGrange, Illinois 60525-5997
•
USA
•
Phone: 708-354-1040
•
Fax: 708-354-2820
•
www.grayhill.com
J-13
Single Deck Rotary Switches
CIRCUIT DIAGRAMS AND REAR VIEWS
COMMON LOCATION
FOR A SINGLE POLE
SWITCH
Style F
Style P
Circle of terminal centers is
Circle of terminal centers is
Ø .187 ± .010 (4,75 ± 0,25).
Ø .300 ± .010 (7,62 ± 0,25).
.298 ± .010
(7,57 ± 0,25)
COMMON LOCATION
FOR A TWO POLE
SWITCH LOCATED ON
.064 ± .010 (1,63 ± 0,25)
DIA. CIRCLE OF CENTERS
36° ± 3°
TYP.
36° ± 3°
TYP.
Screwdriver Actuated
Integral Knob Actuated
Shaft Actuated
Dot on actuator is next to contacting position of pole 1.
Shaft flat opposite point of contact of pole 1.
Line on knob points to contacting position of pole 1.
8
8
8
8
8
8
9
9
9
9
9
9
7
7
7
7
7
7
36° ANGLE
10
1
10
1
10
1
10
1
6
5
6
5
10
1
10
1
6
5
6
5
OF THROW
Switch is viewed
from actuator end
and shown in
6
5
6
5
2
2
2
2
4
4
2
2
4
4
4
4
Position 1.
3
3
3
3
3
3
ONE POLE
TWO POLE
ONE POLE
TWO POLE
ONE POLE
TWO POLE
SPECIFICATIONS
Electrical Ratings
Chart shown for non-shorting (break before
VoltageBreakdown:500Vacbetweenmutually
insulated parts.
Stop Pin: Stainless steel, passivated
Detent Balls: Steel, nickel-plated
Detent and Contact Springs: Tinned music
wire
Rotor Contact: Silver cad-oxide, gold-plated
Terminals and Common: Brass, gold plate
.00002" minimum thickness over silver plate
.0003" minimum.
LifeExpectancy:10,000cyclesat200milliamps.
Onecycleis360°rotationandareturnthroughall
switch positions to the starting position.
Low Level Rating: Make and break a 50 mV, 1
milliamp, resistive load for 10,000 cycles with a
maximum contact resistance of 50 milliohms.
make) contacts, resistive load.
300
B
200
A
Shaft in Style BF or BP: Zinc
IntegralKnobandDetentRotorinStyleCFor
CP: Red Thermoplastic
Mounting Hardware for Style BF or BP: One
mounting nut .062" thick by .312" across flats
and one external tooth lockwasher supplied
with each switch. Mounting nut is brass,
cadmium-plated and lockwasher is spring steel,
cadmium-plated.
100
0
Contact Grayhill for information if the life limiting
criteria is more critical than those listed, if the
required cycles of operation are greater than
those listed, if a larger make and break current is
requiredthantheonelistedforthedesirednumber
of cycles, or if elevated temperatures or reduced
pressures are part of the operating environment.
0
5
10
CYCLES x 1,000
CURVE A: 220 Vac
CURVE B: 115 Vac or 30 Vdc
15
One cycle is 360° rotation and a return through
all switch positions to the starting position. The
data for the curve was measured at sea level,
25°C and 68% relative humidity with the
following limiting criteria:
Contact Resistance: 50 milliohms maximum
(15 milliohms initially).
Insulation Resistance: 10,000 Mohms
minimum between mutually insulated parts.
Materials and Finishes
Additional Characteristics
Switch Base: Diallyl per MIL-M-14
Detent Cover and Detent Rotor in Styles AP,
AF, BP, and BF: Phenolic per MIL-M-14
Bushing: Brass, cadmium-plated, with yellow
chromate
Contact Type: Non-shorting, wiping contacts
Terminals: Switches are provided with the full
circle of terminals regardless of the number of
active positions.
Stop Strength: 8 ounce-inches minimum
CHOICES AND LIMITATIONS
Style and Designation
Number of Decks
Ø 0.187 (4,75)
Circle of Term.
Ø 0.300 (7,62)
Circle of Term.
Angle
Of Throw
Poles
Per Deck
Non-
Shorting
Number of
Positions/Pole
Stops
Terminal
Shorting
AP = Screwdriver
Actuated
BP = Shaft Operated
CP = Integral Knob
AF = Screwdriver
Actuated
BF = Shaft Operated
CF = Integral Knob
36°
Fixed
Printed
1
2
Not
Available
1
1
2 thru 10
2 thru 5
ACCESSORIES
Control knobs available, see page I-57.
ORDERING INFORMATION
Series
Style: Letters from Choices and Limitations Chart
Angle of Throw: 36° only
Available from your local Grayhill Distributor.
For prices and discounts, contact a local Sales
Office,anauthorizedlocalDistributor,orGrayhill.
75AP36–01–1–10N–C
Stop Arrangement: The suffix C or F must be added to a
one pole per deck switch to indicate continuous rotation (C) or
fixed stop (F) between position 1 and position 10
Type of Contacts: N=Non-shorting only
Positions per Pole: requires 02 positions as a minimum to
maximumallowable dependent on the poles per deck
Poles per Deck: 1 or 2 poles available
Number of Decks: 1 deck only
Grayhill, Inc.
• 561 Hillgrove Avenue • LaGrange, Illinois 60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com
J-14
相关型号:
75AF36-01-1-10N
Rotary Switch, 10 Positions, SP10T, Latched, 0.2A, 30VDC, Solder Terminal, Screw Driver Slot Actuator, Through Hole-straight, ROHS COMPLIANT
GRAYHILL
75AF36-01-1-10N-C
Rotary Switch, 10 Positions, SP10T, Latched, 0.2A, 30VDC, Solder Terminal, Screw Driver Slot Actuator, Through Hole-straight, ROHS COMPLIANT
GRAYHILL
75AF36-01-1-10N-F
Rotary Switch, 10 Positions, SP10T, Latched, 0.2A, 30VDC, Solder Terminal, Screw Driver Slot Actuator, Through Hole-straight, ROHS COMPLIANT
GRAYHILL
75AF36-01-2-02N
Rotary Switch, 2 Positions, DPDT, On-on, Latched, 0.2A, 30VDC, Solder Terminal, Screw Driver Slot Actuator, Through Hole-straight, ROHS COMPLIANT
GRAYHILL
75AF36-01-2-02N-F
Rotary Switch, 2 Positions, Maintained, 0.2A, 30VDC, Solder Lug Terminal, Rotary Screw Actuator, Panel Mount
GRAYHILL
75AF36-01-2-03N
Rotary Switch, 3 Positions, DP3T, On-on, Circular, Solder Terminal, Rotary Screw Actuator, Through Hole-straight,
GRAYHILL
75AF36-01-2-04N-C
Rotary Switch, 4 Positions, Maintained, 0.2A, 30VDC, Solder Lug Terminal, Rotary Screw Actuator, Panel Mount
GRAYHILL
75AF36-01-2-05N
Rotary Switch, 5 Positions, DP5T, On-on, Latched, 0.2A, 30VDC, Solder Terminal, Screw Driver Slot Actuator, Through Hole-straight, ROHS COMPLIANT
GRAYHILL
75AF36-01-2-05N-C
Rotary Switch, 5 Positions, Maintained, 0.2A, 30VDC, Solder Lug Terminal, Rotary Screw Actuator, Panel Mount
GRAYHILL
©2020 ICPDF网 联系我们和版权申明