90HBW09P [GRAYHILL]
Slide Dip Switch, 9 Switches, SPST, Latched, 0.1A, 6VDC, Solder Terminal, Surface Mount-straight;型号: | 90HBW09P |
厂家: | GRAYHILL, INC |
描述: | Slide Dip Switch, 9 Switches, SPST, Latched, 0.1A, 6VDC, Solder Terminal, Surface Mount-straight 开关 |
文件: | 总2页 (文件大小:49K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Surface Mount DIP Switches
SERIES 90HB
SPST, Low Profile
FEATURES
• Compatible with SMT Assembly,
Including Infrared Reflow and
Vapor-Phase
• Top Seal Withstands High
Pressure Aqueous Cleaning
• Reliable Spring and Ball Contact
DIMENSIONS In inches (and millimeters)
Top View–Gull Wing
SWITCH IS PACKAGED
AS SHOWN HERE
WITH ALL
O
1
N
2
POSITIONS ON
Gull Wing
3
4
5
6
7
8
.020 ± .002
(0,51 ± 0,05) TYP.
.052 ± .002
(1,32 ± 0,13) TYP.
.165 ± .005
(4,19 ± 0,13)
.290 (7,37)
MAX.
LENGTH ± .010 (0,25)
SEE CHART
.085 ± .005
(2,16 ± 0,13) TYP.
.100 ± .005
(2,54 ± 0,13)
TYP.
C
L
C
.004
(0,10)
L
.395
.190
(4,83)
MAX.
.012 ± .002
(0,30 ± 0,05)
± .010
(10,03
± 0,25)
RecommendedPCPadDimensions–GullWing
C
C
L
L
.100 (2,54) TYP.
.070 (1,78) TYP.
J-Bend
.500
(12,7)
TYP.
.250 (6,35) TYP.
.125 (3,18) TYP.
.320 (8,13)
MAX.
.290 (7,37)
MAX.
.165 ± .005
(4,19 ± 0,13)
LENGTH ± .010 (0,25)
SEE CHART
RecommendedPCPadDimensions–J-Bend
C
C
L
L
.012 ± .001
(0,30 ± 0,03)
TYP.
.220
(5,59)
MAX.
.020 ± .002
(0,51 ± 0,05) TYP.
.100 (2,54) TYP.
.004
(0,10)
.070 (1,78) TYP.
.350
.100 ± .010
.250 ± .010
(6,35 ± 0,25)
(2,54 ± 0,25) TYP.
.085 ± .005
(2,16 ± 0,13)
TYP.
C
C
L
L
(8,90)
TYP.
.150 (3,81) TYP.
.100 (2,54) TYP.
CIRCUITRY
As viewed from the top of the switch in the
positions shown in the drawing.
B-5
Grayhill, Inc.
•
5 6 1 Hillgrove Avenue
•
LaGrange, Illinois 6 0 5 2 5 -5 9 9 7
•
USA • Phone: 7 0 8 -3 5 4 -1 0 4 0
•
Fax: 7 0 8 -3 5 4 -2 8 2 0
•
www.grayhill.com
Surface Mount DIP Switches
SPECIFICATIONS
Electrical Ratings
Make-and-break Current Rating: 2,000 Meets all requirements of MIL- S-83504.
Materials and Finishes
Shorting Member (Ball): Brass, gold-plate
Environmental Ratings
operations per switch position at these resistive OperatingTemperatureRange:-40°Cto+85°C over nickel barrier.
loads:10mA,30Vdc;or10mA,50mVdc;10mA,
50 mVdc; or 25 mA, 24 Vdc; or 100 mA,6 Vdc.
Contact Resistance: (measured at 10 mA, 50
mVdc). Initial: 20 mohms maximum, After Life:
100mohmsmaximum
Storage Temperature Range: -40°C to + 85°C Base Contacts: Copper alloy, gold-plate
MoistureResistance:Perspecification,Method over nickel barrier.
106.
Terminals: Copper alloy, solder-plated over
nickel barrier.
Non-ConductiveParts:Thermoplastic(UL94V-O)
Soldering Information
Insulation Resistance: Minimum, at 100 Vdc
between adjacent closed contacts and also
across open switch contacts.
Solderability:PerMIL-STD-202, Method208
SolderingHeatResistance:PerMIL-S-83504,
six second test.
Tape and Reel Packaging
Tape Seal Integrity: Passes gross leak test
Initial (Mohms): 5,000, After Life (Mohms): 1,000
DielectricStrength: Minimumvoltage(ACRMS)
measured between adjacent closed
contacts and also across open switch contacts.
lnitial: 500 volts, After Life: 500 volts
Recommended Processing Temperature: using 125°C flourinert for 20 seconds minimum.
220°C–230°C(1pass—260°Cmaximum)
ReferenceMIL-STD-202,Method112
ProcessingPosition:Switchistobeprocessed Tape Seal: Polyimide film
with all actuators in the closed (on) position as
shipped.
CurrentCarryRating:3Amaximumriseof20°C
Switch Capacitance: 2 pF at 1 megahertz
TAPE AND REEL PACKAGING
Fluxing: Per EIA RS-448-2 with flux touching
switch body.
Cleaning: Passes immersion test using water/
detergent. Acceptable solutions include 1-1-1
Meetsrequirementsof
EIA 481-2 or EIA 481-3
Mechanical Ratings
13 INCH
DIAMETER REEL
WhereGrayhillperformanceissuperior,theMIL trichlorethane,freon,(TF,TE,orTMS),isopropyl
spec is listed in parentheses.
Mechanical Life: 5,000 operations per switch
position
alcohol, detergent (140°F maximum). Terpene
acceptable for Series 90 only. Solutions which
arenotrecommendedincludeacetone,methylene
Vibration Resistance: Per Method 204, Test chloride, freon TMC.
Condition B , 1mS opening (10 mS allowed)
Mechanical Shock: Per Method 213, Test
Condition A. 1mS opening (10 mS allowed)
Thermal Shock Resistance:Perspecification;
no failures; passes contact resistance.
CONDUCTIVE
PLASTIC EMBOSSED
TAPE
Terminal Strength: Per specification
ThermalAging:1,000hoursat85°C;nofailures.
DIRECTION
OF FEED
ORDERING INFORMATION
16mm
Series
24mm
44mm
Terminal Style: W = Gull Wing, J = J-Bend
90HBW02PR
Packaging: R = Tape and reel packaging (750 switches/reel)
Blank = Tube packaging (each tube is 19.5" long)
Seal: P = Polyimide Seal
16mm
PIN ONE LOCATION
Blank = No Seal
Number of Positions: 02 through 10
Each reel has a 15.750 inch (390 mm)
minimumleaderanda6.30inch(160mm)
minimumtrailer.
No. of
Positions
Length
Inches
Length
Metric
Number
Per Tube
2
3
4
5
6
7
8
9
10
.270"
.370"
.470"
.570"
.670"
.770"
.870"
.970"
1.070"
6,9 mm
9,4 mm
60
47
37
31
26
23
20
18
16
11,9 mm
14,5 mm
17,0 mm
19,6 mm
22,1 mm
24,6 mm
27,2 mm
AvailablefromyourlocalGrayhillDistributor. For
pricesanddiscounts,contactalocalSalesOffice,
an authorized local Distributor or Grayhill.
Grayhill, Inc.
•
5 6 1 Hillgrove Avenue
•
LaGrange, Illinois 6 0 5 2 5 -5 9 9 7
•
USA • Phone: 7 0 8 -3 5 4 -1 0 4 0 • Fax: 7 0 8 -3 5 4 -2 8 2 0 • www.grayhill.com
B-6
相关型号:
90HBW09PR
Slide Dip Switch, 9 Switches, SPST, Latched, 0.1A, 6VDC, Solder Terminal, Surface Mount-straight
GRAYHILL
90HBW09R
Slide Dip Switch, 9 Switches, SPST, Latched, 0.1A, 6VDC, Solder Terminal, Surface Mount-straight
GRAYHILL
90HBW10
Slide Dip Switch, 10 Switches, SPST, Latched, 0.1A, 6VDC, Solder Terminal, Surface Mount-straight
GRAYHILL
90HBW10P
Slide Dip Switch, 10 Switches, SPST, Latched, 0.1A, 6VDC, Solder Terminal, Surface Mount-straight
GRAYHILL
90HBW10PR
Slide Dip Switch, 10 Switches, SPST, Latched, 0.1A, 6VDC, Solder Terminal, Surface Mount-straight
GRAYHILL
90HBW10R
Slide Dip Switch, 10 Switches, SPST, Latched, 0.1A, 6VDC, Solder Terminal, Surface Mount-straight
GRAYHILL
©2020 ICPDF网 联系我们和版权申明