GLS87AA016G9 [GREENLIANT]
Industrial Grade SATA M.2 ArmourDrive EX Series;型号: | GLS87AA016G9 |
厂家: | Greenliant |
描述: | Industrial Grade SATA M.2 ArmourDrive EX Series |
文件: | 总8页 (文件大小:245K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
GLS87AAxxxG9 / GLS87CAxxxG9
Industrial Grade SATA M.2 ArmourDrive™ EX Series
Factsheet 01.000
August 2019
Features
• Industry Standard M.2 SATA Host Interface
• Expanded Data Protection
–
–
–
–
SATA 1.5Gb/s, 3Gb/s and 6Gb/s
SATA Revision 3.2
ATA/ATAPI-8 compliant
–
Added data security through user-selectable
protection zones
Secure Erase (data sanitization)
–
Supports 48-bit address feature set
• 20-Byte Serial Number
• Performance
–
–
Factory pre-programmed unique ID
User-programmable 10-Byte ID
–
–
Sequential data read: Up to 470 MByte/sec*
Sequential data write: Up to 340 MByte/sec*
* 128 KByte transfer size tested in VDBench on Linux
• Supports TRIM and SMART Commands
• Robust Built-in ECC
• Native Command Queuing (NCQ)
• Power Management
–
–
–
3.3V power supply
Host initialized power management (HIPM)
Device initialized power management (DIPM)
–
Up to 32 commands
• NAND Configuration
–
–
1 bit per cell (SLC)
Designed with Greenliant’s advanced
EnduroSLC™ Technology
• Power Specifications
–
Active mode:
64GB: Up to 2180mW
32GB: Up to 1800mW
16GB: Up to 1980mW
8GB: Up to 1540mW
Idle mode: < 355mW (typical)
DevSleep mode: < 70mW (typical)
• Ultra High Endurance
250K P/E cycles
• Operating Temperature Range
Industrial: -40°C to 85°C
• M.2 2242 and 2280 Form Factors
–
–
–
–
–
–
–
22mm x 42mm x 2.38mm
22mm x 80mm x 2.38mm
Single-sided (SS), B+M key
• Thermal Throttling
• Reliability
–
Mean Time Between Failures (MTBF):
• All Devices are RoHS Compliant
More than 2 million hours**
** preliminary estimate
Product Description
The GLS87AA008G9 / 016G9 / 032G9 / 064G9 (2280
form factor) and GLS87CA008G9 / 016G9 / 032G9 /
064G9 (2242 form factor) Industrial Grade SATA M.2
ArmourDrive™ EX Series modules (referred to as
“M.2 ArmourDrive” in this factsheet) are ultra-high
endurance, high-reliability solid state drives. They
include an 8, 16, 32 or 64 GByte SATA NANDrive™
on a printed circuit board (PCB).
The NAND flash controller with built-in advanced
NAND management firmware communicates with the
host through the standard SATA protocol. It does not
require any additional or proprietary software such as
the Flash File System (FFS) and Memory Technology
Driver (MTD). The firmware effectively optimizes the
use of NAND flash memory’s program/erase (P/E)
cycles and minimizes write amplification.
M.2 ArmourDrive is ideal for applications that require
removable form factor and more reliable data storage.
Serial ATA (SATA) M.2 solid state storage technology
is widely used in industrial computers, test and
M.2 ArmourDrive is pre-programmed with a 10-Byte
unique serial ID and has the option of programming
an additional 10-Byte serial ID for even greater
system security.
measurement
instrumentation,
multi-functional
M.2 ArmourDrive’s advanced NAND management
technology improves endurance, enhances data
security and prevents data loss during unexpected
power loss events. This innovative technology
combines robust NAND controller hardware error
correction capabilities with advanced wear-leveling
algorithms and bad block management to improve
data reliability and significantly extend the life of the
product.
printers, medical equipment, security and surveillance
systems, network servers and digital signage. These
removable solid state drives (SSDs) surpass
traditional hard disk drives (HDDs) in their small size,
security, reliability, ruggedness and low power
consumption.
These specifications are subject to change without notice.
© 2019 Greenliant
08/15/2019
S71478-01
1
GLS87AAxxxG9 / GLS87CAxxxG9
Industrial Grade SATA M.2 ArmourDrive™ EX Series
Factsheet 01.000
August 2019
1.0
GENERAL DESCRIPTION
Each M.2 ArmourDrive module contains a NANDrive multi-chip package, which integrates a SATA NAND flash
memory controller with discrete NAND flash die. Refer to Figure 2-1 for the M.2 ArmourDrive block diagram.
1.1.5
Error Correction Code (ECC)
1.1
Optimized M.2 ArmourDrive
The ECC technology uses advanced algorithms to
detect and correct errors, ensuring data integrity and
extending the SSD lifespan.
The heart of M.2 ArmourDrive is the SATA NAND
flash memory controller, which translates standard
SATA signals into flash media data and control
signals. The following components contribute to M.2
ArmourDrive’s operation.
1.1.6 Multi-tasking Interface
The multi-tasking interface enables fast, sequential
write performance by allowing concurrent Read,
Program and Erase operations to multiple flash media.
1.1.1 Microcontroller Unit (MCU)
The MCU translates SATA commands into data and
control signals required for flash media operation.
1.2
Advanced NAND Management
1.1.2 Internal Direct Memory Access (DMA)
M.2 ArmourDrive’s controller uses advanced wear-
leveling algorithms to substantially increase the
longevity of NAND flash media. Wear caused by data
writes is evenly distributed in all or select blocks in the
device that prevents “hot spots” in locations that are
programmed and erased extensively. This effective
wear-leveling technique results in optimized device
endurance, enhanced data retention and higher
reliability required by long-life applications.
M.2 ArmourDrive uses internal DMA allowing instant
data transfer from/to buffer to/from flash media. This
implementation eliminates microcontroller overhead
associated with the traditional, firmware-based
approach, thereby increasing the data transfer rate.
1.1.3 Power Management Unit (PMU)
The PMU controls the power consumption of M.2
ArmourDrive. The PMU dramatically reduces the
power consumption of M.2 ArmourDrive by putting the
part of the circuitry that is not in operation into sleep
mode.
The Flash File System handles inadvertent power
interrupts and has auto-recovery capability to ensure
mSATA ArmourDrive firmware integrity. For regular
power management, the host must send an
IDLE_IMMEDIATE command and wait for command
ready before powering down M.2 ArmourDrive.
1.1.4 Embedded Flash File System
The embedded flash file system is an integral part of
M.2 ArmourDrive. It contains MCU firmware that
performs the following tasks:
1. Translates host side signals into flash media
writes and reads
2. Provides flash media wear leveling to spread the
flash writes across all memory address space to
increase the longevity of flash media
3. Keeps track of data file structures
4. Manages system security for the selected
protection zones
These specifications are subject to change without notice.
© 2019 Greenliant
08/15/2019
S71478-01
2
GLS87AAxxxG9 / GLS87CAxxxG9
Industrial Grade SATA M.2 ArmourDrive™ EX Series
Factsheet 01.000
August 2019
2.0
FUNCTIONAL BLOCKS
Figure 2-1: M.2 ArmourDrive Block Diagram
These specifications are subject to change without notice.
© 2019 Greenliant
08/15/2019
S71478-01
3
GLS87AAxxxG9 / GLS87CAxxxG9
Industrial Grade SATA M.2 ArmourDrive™ EX Series
Factsheet 01.000
August 2019
APPENDIX
3.0
3.1
Product Ordering Information
GLS 87 xA
XX XX
xxx Gx - I - BN2xx
XXX XX - X - XXXXX
Ordering Code
BN2xx = SATA M.2 AmourDrive Revision
Operating Temperature
I = Industrial: -40°C to +85°C
NAND Configuration
1 = 1 bit per cell
8 = 1 bit per cell
GByte Designator
G = GByte
Capacity
008 = 8 GByte
016 = 16 GByte
032 = 32 GByte
064 = 64 GByte
Product Generation
A = Generation
Form Factor
A = M.2 2280 (SS)
C = M.2 2242 (SS)
Product Family
87 = SATA M.2 ArmourDrive
These specifications are subject to change without notice.
© 2019 Greenliant
08/15/2019
S71478-01
4
GLS87AAxxxG9 / GLS87CAxxxG9
Industrial Grade SATA M.2 ArmourDrive™ EX Series
Factsheet 01.000
August 2019
Valid Combinations
Valid product combinations are those that are in the mass production or will be in the mass production. Consult
your Greenliant sales representative to confirm availability of the valid combinations and to determine availability
of new product combinations.
Table 3-1: M.2 2280 ArmourDrive Product Valid Ordering Numbers
Capacity
Operating Temperature
Industrial (-40°C to 85°C)
Industrial (-40°C to 85°C)
Industrial (-40°C to 85°C)
Industrial (-40°C to 85°C)
Part Number
Form Factor
8GB
GLS87AA008G9-I-BN202
GLS87AA016G9-I-BN202
GLS87AA032G9-I-BN202
GLS87AA064G9-I-BN202
2280 (SS), B+M key
2280 (SS), B+M key
2280 (SS), B+M key
2280 (SS), B+M key
16GB
32GB
64GB
Table 3-2: M.2 2242 ArmourDrive Product Valid Ordering Numbers
Capacity
Operating Temperature
Industrial (-40°C to 85°C)
Industrial (-40°C to 85°C)
Industrial (-40°C to 85°C)
Industrial (-40°C to 85°C)
Part Number
Form Factor
8GB
GLS87CA008G9-I-BN202
GLS87CA016G9-I-BN202
GLS87CA032G9-I-BN202
GLS87CA064G9-I-BN202
2242 (SS), B+M key
2242 (SS), B+M key
2242 (SS), B+M key
2242 (SS), B+M key
16GB
32GB
64GB
These specifications are subject to change without notice.
© 2019 Greenliant
08/15/2019
S71478-01
5
GLS87AAxxxG9 / GLS87CAxxxG9
Industrial Grade SATA M.2 ArmourDrive™ EX Series
Factsheet 01.000
August 2019
3.2
Board Diagrams
BOTTOM VIEW
TOP VIEW
SIDE VIEW
Note:
All dimensions are in millimeters, unless otherwise specified.
Figure 3-1: M.2 2242 ArmourDrive Dimensions
These specifications are subject to change without notice.
© 2019 Greenliant
08/15/2019
S71478-01
6
GLS87AAxxxG9 / GLS87CAxxxG9
Industrial Grade SATA M.2 ArmourDrive™ EX Series
Factsheet 01.000
August 2019
BOTTOM VIEW
TOP VIEW
SIDE VIEW
Note:
All dimensions are in millimeters, unless otherwise specified.
Figure 3-2: M.2 2280 ArmourDrive Dimensions
These specifications are subject to change without notice.
© 2019 Greenliant
08/15/2019
S71478-01
7
GLS87AAxxxG9 / GLS87CAxxxG9
Industrial Grade SATA M.2 ArmourDrive™ EX Series
Factsheet 01.000
August 2019
Revision History
Revision History
Revision
Description
Date
01.000
Initial Release as Factsheet
August 15, 2019
© 2019 Greenliant. All rights reserved.
Greenliant and the Greenliant logo are registered trademarks, and ArmourDrive and NANDrive are trademarks
of Greenliant. All other trademarks and registered trademarks are the property of their respective owners.
Specifications are subject to change without notice. Memory sizes denote raw storage capacity; actual usable
capacity may be less.
Greenliant makes no warranty for the use of its products other than those expressly contained in the Greenliant
Terms and Conditions of Sale.
www.greenliant.com
These specifications are subject to change without notice.
© 2019 Greenliant
08/15/2019
S71478-01
8
相关型号:
©2020 ICPDF网 联系我们和版权申明