GLS88AR128G3 [GREENLIANT]

Commercial Temp NVMe M.2 ArmourDrive PX Series;
GLS88AR128G3
型号: GLS88AR128G3
厂家: Greenliant    Greenliant
描述:

Commercial Temp NVMe M.2 ArmourDrive PX Series

文件: 总7页 (文件大小:97K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
GLS88AR128G3 / 256G3 / 512G3 / 001T3 / 002T3  
Commercial Temp NVMe M.2 ArmourDrive™ PX Series  
Factsheet 01.000  
August 2020  
Features  
Industry Standard PCIe Host Interface  
Reliability  
Mean Time Between Failures (MTBF):  
1.5 million hours  
Data Protection  
PCIe Gen3x4  
PCI Express Base Revision 3.1 compliant  
NVMe 1.3 compliant  
Performance  
End-to-end data path protection  
Secure erase / Data sanitization  
Supports TCG Pyrite  
Sequential data read: Up to 2,500 MB/s  
Sequential data write: Up to 2,100 MB/s  
(measured using 128KB transfer size)  
32-bit / 64-bit Addressing Mode  
512 Byte / 4 KB Sector Size Support  
Host Memory Buffer (HMB)  
IO Queuing  
Power Management  
3.3V single power supply  
Autonomous power state transition (APST)  
feature to implement power savings  
Active state power management (ASPM) to  
reduce PCIe link power consumption  
Supports L1.2  
128 IO queues supported  
Built-in ECC  
Uses advanced LDPC bit error detection and  
correction optimized for 3D NAND  
NAND Configuration  
Power Specifications  
Active mode:  
3 bits per cell (3D TLC NAND)  
2TB: 3,750 mW (typical)  
1TB: 3,680 mW (typical)  
512GB: 3,520 mW (typical)  
256GB: 3,450 mW (typical)  
128GB 3,150 mW (typical)  
Idle mode: < 70 mW  
Endurance  
Program/ Erase (P/E) cycles: 3K  
Operating Temperature Range  
Commercial: 0°C to 70°C  
M.2 2280 Form Factor  
22mm x 80mm x 2.23mm (max)  
Single-sided (SS), M key  
L1.2 mode: < 2 mW  
Integrated Current Detector  
All Devices are RoHS Compliant  
Notes: 1. User capacity: 1GB = 1 billion bytes,  
1TB = 1 trillion bytes  
Protects from inrush current and generates  
reset during power-up and power-down to  
prevent inadvertent writes  
2. PCIe = Peripheral Component Interconnect Express  
3. NVMe = Non-Volatile Memory Express  
Supports SMART and TRIM Commands  
Product Description  
The GLS88AR128G3 / 256G3 / 512G3 / 001T3 /  
002T3 Commercial Temperature NVMe M.2  
ArmourDrive™ PX Series (referred to as “M.2  
ArmourDrive” in this datasheet) are high-performance,  
high-reliability solid state drives. They combine 128,  
256 or 512 GBytes, or 1 or 2 TBytes of NAND flash  
memory with an advanced NVMe PCIe controller on a  
printed circuit board (PCB). NVMe is a highly scalable  
protocol optimized for efficient data transport over  
PCIe for storage on NAND flash.  
The NVMe PCIe SSD controller with built-in advanced  
NAND management firmware communicates with the  
host through the standard PCIe interface. It does not  
require any additional or proprietary software such as  
the Flash File System (FFS) and Memory Technology  
Driver (MTD). The firmware effectively optimizes the  
use of NAND flash memory’s program/erase (P/E)  
cycles and minimizes write amplification.  
M.2 ArmourDrive’s advanced NAND management  
technology improves endurance, enhances data  
security and helps prevent data corruption during  
unexpected power failure events. This innovative  
technology combines robust NAND controller  
hardware error correction capabilities with advanced  
wear-leveling algorithms and bad block management  
to improve data reliability and significantly extend the  
life of the product.  
M.2 ArmourDrive is ideal for applications that require  
removable form factor and more reliable data storage.  
NVMe M.2 solid state storage technology is used in  
industrial and cloud computing, datacenters, high-  
performance enterprise storage and networking  
systems, endpoint and thin clients, gaming machines  
and broadcasting equipment. These removable solid  
state drives (SSDs) provide low latency and fast  
sequential and random read/write speeds.  
These specifications are subject to change without notice.  
© 2020 Greenliant  
08/07/2020  
S71492-01  
1
GLS FS0019 Rev. 00  
GLS88AR128G3 / 256G3 / 512G3 / 001T3 / 002T3  
Commercial Temp NVMe M.2 ArmourDrive™ PX Series  
Factsheet 01.000  
August 2020  
1.0 GENERAL DESCRIPTION  
Each M.2 ArmourDrive module integrates an NVMe PCIe SSD controller with up to four NAND flash multi-chip  
packages. Refer to Figure 2-1 for the M.2 ArmourDrive block diagram.  
1.1.5 Power Interrupt Data Protection  
1.1 Optimized M.2 ArmourDrive  
Power Interrupt Data Protection is a mechanism to  
prevent data corruption during unexpected power  
failure events. Enhanced data integrity is supported by  
the controller’s advanced firmware during abnormal  
power loss. The controller proactively optimizes the  
amount and stay time of the “in-flight” data residing in  
the cache. To ensure there is no data loss risk caused  
by power cycling, the controller sends an  
acknowledgement to the host only when the incoming  
data is fully committed to the NAND flash.  
The heart of M.2 ArmourDrive is the NVMe PCIe SSD  
controller, which translates standard PCIe signals into  
flash media data and control signals. The following  
components contribute to M.2 ArmourDrive’s  
operation.  
1.1.1 Microcontroller Unit (MCU)  
The MCU translates PCIe / NVMe commands into  
data and control signals required for flash media  
operation.  
1.1.6 Error Correction Code (ECC)  
1.1.2 Internal Direct Memory Access (DMA)  
The ECC technology uses advanced LDPC algorithms  
to detect and correct errors, ensuring data integrity  
and extending the SSD lifespan.  
M.2 ArmourDrive uses internal DMA allowing instant  
data transfer from/to buffer to/from flash media. This  
implementation eliminates microcontroller overhead  
associated with the traditional, firmware-based  
approach, thereby increasing the data transfer rate.  
1.1.7 Multi-tasking Interface  
The multi-tasking interface enables concurrent Read,  
Program and Erase operations to multiple NAND flash  
media.  
1.1.3 Power Management Unit (PMU)  
The PMU controls the power consumption of M.2  
ArmourDrive. The PMU dramatically reduces the  
power consumption of M.2 ArmourDrive by putting the  
part of the circuitry that is not in operation into sleep  
mode.  
1.2 Advanced NAND Management  
M.2 ArmourDrive’s controller uses advanced wear-  
leveling algorithms to substantially increase the  
longevity of NAND flash media. Wear caused by data  
writes is evenly distributed in all or select blocks in the  
device that prevents “hot spots” in locations that are  
programmed and erased extensively. This effective  
wear-leveling technique results in optimized device  
endurance, enhanced data retention and higher  
reliability required by long-life applications.  
The Flash File System handles inadvertent power  
interrupts and has auto-recovery capability to ensure  
M.2 ArmourDrive firmware integrity.  
1.1.4 Embedded Flash File System  
The embedded flash file system is an integral part of  
M.2 ArmourDrive. It contains MCU firmware that  
performs the following tasks:  
1.3 Advanced Data Security  
1. Translates host side signals into flash media  
writes and reads  
Advanced data security measures include end-to-end  
data path protection, data sanitization and Secure  
Erase support. Secure Erase is an effective method to  
quickly wipe all data from a PCIe-based SSD using the  
NVMe protocol (Format NVM).  
2. Provides flash media wear leveling to spread  
the flash writes across all memory address  
space to increase the longevity of flash media  
3. Keeps track of data file structures  
2.0 FUNCTIONAL BLOCKS  
These specifications are subject to change without notice.  
© 2020 Greenliant  
08/07/2020  
S71492-01  
2
GLS FS0019 Rev. 00  
GLS88AR128G3 / 256G3 / 512G3 / 001T3 / 002T3  
Commercial Temp NVMe M.2 ArmourDrive™ PX Series  
Factsheet 01.000  
August 2020  
Figure 2-1: M.2 ArmourDrive Block Diagram  
These specifications are subject to change without notice.  
© 2020 Greenliant  
GLS FS0019 Rev. 00  
08/07/2020  
S71492-01  
3
GLS88AR128G3 / 256G3 / 512G3 / 001T3 / 002T3  
Commercial Temp NVMe M.2 ArmourDrive™ PX Series  
Factsheet 01.000  
August 2020  
3.0 APPENDIX  
3.1  
Product Ordering Information  
GLS 88 AR  
XX XX  
xxx x3 - C - BZ3xx  
XXX XX - X - XXXXX  
Ordering Code  
xZ3xx = NVMe M.2 AmourDrive Revision  
Operating Temperature  
C = Commercial: 0°C to +70°C  
NAND Configuration  
3 = 3 bits per cell  
GByte Designator  
G = GByte  
T = TByte  
Capacity  
128 = 128 GByte  
256 = 256 GByte  
512 = 512 GByte  
001 = 1 TByte  
002 = 2 TByte  
Product Generation  
R = Generation  
Form Factor  
A = M.2 2280 (SS)  
Product Family  
88 = NVMe M.2 ArmourDrive  
These specifications are subject to change without notice.  
© 2020 Greenliant  
08/07/2020  
S71492-01  
4
GLS FS0019 Rev. 00  
GLS88AR128G3 / 256G3 / 512G3 / 001T3 / 002T3  
Commercial Temp NVMe M.2 ArmourDrive™ PX Series  
Factsheet 01.000  
August 2020  
Valid Combinations  
Valid product combinations are those that are in the mass production or will be in the mass production. Consult  
your Greenliant sales representative to confirm availability of the valid combinations and to determine availability  
of new product combinations.  
Table 3-1: M.2 ArmourDrive Product Valid Ordering Numbers  
Capacity  
Operating Temperature  
Part Number  
Form Factor  
128GB  
Commercial (0°C to 70°C)  
GLS88AR128G3-C-BZ301  
2280 (SS), M key  
256GB  
512GB  
1TB  
Commercial (0°C to 70°C)  
Commercial (0°C to 70°C)  
Commercial (0°C to 70°C)  
Commercial (0°C to 70°C)  
GLS88AR256G3-C-BZ301  
GLS88AR512G3-C-BZ301  
GLS88AR001T3-C-BZ301  
GLS88AR002T3-C-BZ301  
2280 (SS), M key  
2280 (SS), M key  
2280 (SS), M key  
2280 (SS), M key  
2TB  
These specifications are subject to change without notice.  
© 2020 Greenliant  
08/07/2020  
S71492-01  
5
GLS FS0019 Rev. 00  
GLS88AR128G3 / 256G3 / 512G3 / 001T3 / 002T3  
Commercial Temp NVMe M.2 ArmourDrive™ PX Series  
Factsheet 01.000  
August 2020  
3.2 Board Diagrams  
SIDE VIEW  
TOP VIEW  
BOTTOM VIEW  
Note:  
All dimensions are in millimeters, unless otherwise specified.  
Figure 3-1: M.2 2280 ArmourDrive Dimensions  
These specifications are subject to change without notice.  
© 2020 Greenliant  
08/07/2020  
S71492-01  
6
GLS FS0019 Rev. 00  
GLS88AR128G3 / 256G3 / 512G3 / 001T3 / 002T3  
Commercial Temp NVMe M.2 ArmourDrive™ PX Series  
Factsheet 01.000  
August 2020  
Revision History  
Number  
Description  
Date  
01.000  
Initial release as Factsheet  
August 07, 2020  
© 2020 Greenliant. All rights reserved.  
Greenliant and the Greenliant logo are registered trademarks, and ArmourDrive is a trademark of Greenliant. All  
other trademarks and registered trademarks are the property of their respective owners.  
Specifications are subject to change without notice. Memory sizes denote raw storage capacity; actual usable  
capacity may be less.  
Greenliant makes no warranty for the use of its products other than those expressly contained in the Greenliant  
Terms and Conditions of Sale.  
www.greenliant.com  
These specifications are subject to change without notice.  
© 2020 Greenliant  
08/07/2020  
S71492-01  
7
GLS FS0019 Rev. 00  

相关型号:

GLS88AR256G3

Commercial Temp NVMe M.2 ArmourDrive PX Series
GREENLIANT

GLS88AR512G3

Commercial Temp NVMe M.2 ArmourDrive PX Series
GREENLIANT

GLS88BP1T923

Industrial Temp NVMe M.2 ArmourDrive PX Series
GREENLIANT

GLS88BP240G3

Industrial Temp NVMe M.2 ArmourDrive PX Series
GREENLIANT

GLS88BP480G3

Industrial Temp NVMe M.2 ArmourDrive PX Series
GREENLIANT

GLS88BP960G3

Industrial Temp NVMe M.2 ArmourDrive PX Series
GREENLIANT

GLS88DQ064G3

Industrial Temp NVMe M.2 ArmourDrive PX Series
GREENLIANT

GLS88DQ128G3

Industrial Temp NVMe M.2 ArmourDrive PX Series
GREENLIANT

GLS88DQ256G3

Industrial Temp NVMe M.2 ArmourDrive PX Series
GREENLIANT

GLS88DQ512G3

Industrial Temp NVMe M.2 ArmourDrive PX Series
GREENLIANT

GLS89SA016G1

Industrial Grade SATA 2.5 ArmourDrive EX Series
GREENLIANT

GLS89SA016G8

Industrial Grade SATA 2.5 ArmourDrive EX Series
GREENLIANT