GLS89SA128G8 [GREENLIANT]
Industrial Grade SATA 2.5 ArmourDrive EX Series;型号: | GLS89SA128G8 |
厂家: | Greenliant |
描述: | Industrial Grade SATA 2.5 ArmourDrive EX Series |
文件: | 总6页 (文件大小:128K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
GLS89SAxxxG1 / GLS89SAxxxG8
Industrial Grade SATA 2.5” ArmourDrive™ EX Series
Factsheet 01.000
August 2019
Features
• Industry Standard 2.5” SATA Host Interface
• Expanded Data Protection
–
–
–
–
SATA 1.5Gb/s, 3Gb/s and 6Gb/s
SATA Revision 3.2
ATA/ATAPI-8 compliant
Supports 48-bit address feature set
–
Added data security through user-selectable
protection zones
Secure Erase (data sanitization)
–
• 20-Byte Serial Number
–
–
Factory pre-programmed unique ID
User-programmable 10-Byte ID
• Performance
–
–
Sequential data read: Up to 470 MByte/sec*
Sequential data write: Up to 340 MByte/sec*
* 128 KByte transfer size tested in VDBench on Linux
• Supports TRIM and SMART Commands
• Robust Built-in ECC
• Thermal Throttling
• Power Management
–
–
–
5V power supply
Host initialized power management (HIPM)
Device initialized power management (DIPM)
• Native Command Queuing (NCQ)
–
Up to 32 commands
• NAND Configuration
• Power Specifications
–
–
1 bit per cell (SLC)
Designed with Greenliant’s advanced
EnduroSLC™ Technology
–
Active mode:
128GB: Up to 2180mW
64GB: Up to 1800mW
32GB: Up to 1980mW
16GB: Up to 1540mW
• High Endurance
–
–
GLS89SAxxxG1: 50K P/E cycles
GLS89SAxxxG8: 100K P/E cycles
–
–
Idle / Standby mode: < 355mW (typical)
DevSleep mode: < 70mW (typical)
• Operating Temperature Range
Industrial: -40°C to 85°C
• 2.5-inch Form Factor
–
• Reliability
Mean Time Between Failures (MTBF):
–
–
100mm x 69.85mm x 7.00mm
More than 2 million hours**
** preliminary estimate
• All Devices are RoHS Compliant
Product Description
The GLS89SA016G1 / 032G1 / 064G1 / 128G1 /
The NAND flash controller with built-in advanced
NAND management firmware communicates with the
host through the standard SATA protocol. It does not
require any additional or proprietary software such as
the Flash File System (FFS) and Memory Technology
Driver (MTD). The firmware effectively optimizes the
use of NAND flash memory’s program/erase (P/E)
cycles and minimizes write amplification.
016G8
/
032G8
/
064G8
/
128G8 Industrial
Temperature SATA 2.5” ArmourDrive™ EX Series
(referred to as “2.5” ArmourDrive” in this factsheet) are
high-endurance, high-reliability solid state drives.
They include a 16, 32, 64 or 128 GByte SATA
NANDrive™ in a standard 2.5-inch form factor
housing.
2.5” ArmourDrive is ideal for applications that require
hot-swappable and reliable data storage. 2.5” SATA
solid state storage technology is widely used in
servers, laptops, network-attached storage, industrial
2.5” ArmourDrive is pre-programmed with a 10-Byte
unique serial ID and has the option of programming
an additional 10-Byte serial ID for even greater
system security.
computers,
navigation
systems,
test
and
2.5” ArmourDrive’s advanced NAND management
technology improves endurance, enhances data
security and helps prevent data loss during
unexpected power failure events. This innovative
technology combines robust NAND controller
hardware error correction capabilities with advanced
wear-leveling algorithms and bad block management
to improve data reliability and significantly extend the
life of the product.
measurement instrumentation, multi-function printers,
security and surveillance equipment, digital signage
and networking systems. These removable solid state
drives (SSDs) surpass traditional hard disk drives
(HDDs) in their security, reliability, ruggedness and
low power consumption.
.
These specifications are subject to change without notice.
© 2019 Greenliant
08/20/2019
S71480-01
1
GLS FS0019 Rev. 00
GLS89SAxxxG1 / GLS89SAxxxG8
Industrial Grade SATA 2.5” ArmourDrive™ EX Series
Factsheet 01.000
August 2019
1.0
GENERAL DESCRIPTION
Each 2.5” ArmourDrive contains a NANDrive multi-chip package, which integrates a SATA NAND flash memory
controller with discrete NAND flash die, in a standard 2.5-inch form factor housing. Refer to Figure 2-1 for the 2.5”
ArmourDrive block diagram.
1.1.5 Error Correction Code (ECC)
1.1
Optimized 2.5” ArmourDrive
The ECC technology uses advanced algorithms to
detect and correct errors, ensuring data integrity and
extending the SSD lifespan.
The heart of 2.5” ArmourDrive is the SATA NAND
flash controller, which translates standard SATA
signals into flash media data and control signals. The
following components contribute to 2.5” ArmourDrive’s
operation.
1.1.6 Multi-tasking Interface
The multi-tasking interface enables fast, sequential
write performance by allowing concurrent Read,
Program and Erase operations to multiple flash media.
1.1.1 Microcontroller Unit (MCU)
The MCU translates SATA commands into data and
control signals required for flash media operation.
1.2
Advanced NAND Management
1.1.2 Internal Direct Memory Access (DMA)
2.5” ArmourDrive’s controller uses advanced wear-
leveling algorithms to substantially increase the
longevity of NAND flash media. Wear caused by data
writes is evenly distributed in all or select blocks in the
device that prevents “hot spots” in locations that are
programmed and erased extensively. This effective
wear-leveling technique results in optimized device
endurance, enhanced data retention and higher
reliability required by long-life applications.
2.5” ArmourDrive uses internal DMA allowing instant
data transfer from/to buffer to/from flash media. This
implementation eliminates microcontroller overhead
associated with the traditional, firmware-based
approach, thereby increasing the data transfer rate.
1.1.3 Power Management Unit (PMU)
The PMU controls the power consumption of 2.5”
ArmourDrive. The PMU dramatically reduces the
power consumption of 2.5” ArmourDrive by putting the
part of the circuitry that is not in operation into sleep
mode.
The Flash File System handles inadvertent power
interrupts and has auto-recovery capability to ensure
2.5” ArmourDrive firmware integrity. For regular power
management,
the
host
must
send
an
IDLE_IMMEDIATE command and wait for command
ready before powering down 2.5” ArmourDrive.
1.1.4 Embedded Flash File System
The embedded flash file system is an integral part of
2.5” ArmourDrive. It contains MCU firmware that
performs the following tasks:
1. Translates host side signals into flash media
writes and reads
2. Provides flash media wear leveling to spread
the flash writes across all memory address
space to increase the longevity of flash media
3. Keeps track of data file structures
These specifications are subject to change without notice.
© 2019 Greenliant
08/20/2019
S71480-01
2
GLS89SAxxxG1 / GLS89SAxxxG8
Industrial Grade SATA 2.5” ArmourDrive™ EX Series
Factsheet 01.000
August 2019
2.0
FUNCTIONAL BLOCKS
Figure 2-1: SATA 2.5” ArmourDrive Block Diagram
These specifications are subject to change without notice.
© 2019 Greenliant
08/20/2019
S71480-01
3
GLS89SAxxxG1 / GLS89SAxxxG8
Industrial Grade SATA 2.5” ArmourDrive™ EX Series
Factsheet 01.000
August 2019
APPENDIX
3.0
3.1
Product Ordering Information
GLS 89 SA
XX XX
xxx xx - I - BN4xx
XXX XX - X - XXXXX
Ordering Code
BN4xx = SATA 2.5” AmourDrive Revision
Operating Temperature
I = Industrial: -40°C to +85°C
NAND Configuration
1 = 1 bit per cell
8 = 1 bit per cell
GByte Designator
G = GByte
Capacity
016 = 16 GByte
032 = 32 GByte
064 = 64 GByte
128 = 128 GByte
Product Generation
A = Generation
Form Factor
S = 2.5”
Product Family
89 = SATA 2.5” ArmourDrive
Valid Combinations
Valid product combinations are those that are in the mass production or will be in the mass production. Consult
your Greenliant sales representative to confirm availability of the valid combinations and to determine availability
of new product combinations.
Table 3-1: SATA 2.5” ArmourDrive Product Valid Ordering Numbers
Capacity
Operating Temperature
Part Number
Form Factor
GLS89SA016G1-I-BN400
GLS89SA016G8-I-BN401
GLS89SA032G1-I-BN400
GLS89SA032G8-I-BN401
GLS89SA064G1-I-BN400
GLS89SA064G8-I-BN401
GLS89SA128G1-I-BN400
GLS89SA128G8-I-BN401
16GB
Industrial (-40°C to 85°C)
2.5-inch
32GB
64GB
128GB
Industrial (-40°C to 85°C)
Industrial (-40°C to 85°C)
Industrial (-40°C to 85°C)
2.5-inch
2.5-inch
2.5-inch
These specifications are subject to change without notice.
© 2019 Greenliant
08/20/2019
S71480-01
4
GLS89SAxxxG1 / GLS89SAxxxG8
Industrial Grade SATA 2.5” ArmourDrive™ EX Series
Factsheet 01.000
August 2019
Mechanical Diagrams
3.2
Note:
All linear dimensions are in millimeters.
Figure 3-1: SATA 2.5” ArmourDrive Dimensions
These specifications are subject to change without notice.
© 2019 Greenliant
08/20/2019
S71480-01
5
GLS89SAxxxG1 / GLS89SAxxxG8
Industrial Grade SATA 2.5” ArmourDrive™ EX Series
Factsheet 01.000
August 2019
Revision History
Revision History
Revision
Description
Date
01.000
Initial Release as Factsheet
August 20, 2019
© 2019 Greenliant. All rights reserved.
Greenliant and the Greenliant logo are registered trademarks, and ArmourDrive and NANDrive are trademarks
of Greenliant. All other trademarks and registered trademarks are the property of their respective owners.
Specifications are subject to change without notice. Memory sizes denote raw storage capacity; actual usable
capacity may be less.
Greenliant makes no warranty for the use of its products other than those expressly contained in the Greenliant
Terms and Conditions of Sale.
www.greenliant.com
These specifications are subject to change without notice.
© 2019 Greenliant
08/20/2019
S71480-01
6
相关型号:
©2020 ICPDF网 联系我们和版权申明