GLS93MP064G3 [GREENLIANT]
Industrial Temp SD / microSD ArmourDrive PX Series;
| 型号： | GLS93MP064G3 |
| 厂家： | 
Greenliant |
| 描述： | Industrial Temp SD / microSD ArmourDrive PX Series |
| 文件： | 总8页 (文件大小：135K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
GLS93SPxxxG3 / GLS93MPxxxG3
Industrial Temp SD / microSD ArmourDrive™ PX Series
Factsheet 01.000
October 2019
Features
• Industry Standard Interface
• Reliability
Mean Time Between Failures (MTBF):
More than 3 million hours
• Data Protection
–
–
SD Specification Version 6.10 compliant
Supports secure digital (SD) and serial
peripheral interface (SPI) protocols
–
• Performance
–
Content Protection for Recordable Media
–
Class 10 Speed performance rating (based on
(CPRM) support (optional)
SD 6.10 Specification)
–
Password protection (optional)
–
Bus speed mode (using 4 parallel data lines)*
SDR12: 1.8V signaling (up to 25 MHz) up to
12.5MB/sec
SDR25: 1.8V signaling (up to 50 MHz) up to
25MB/sec
SDR50: 1.8V signaling (up to 100 MHz) up to
50MB/sec
SDR104: 1.8V signaling (up to 208 MHz) up
to 104MB/sec
• Built-in ECC
Uses advanced bit error detection and
correction optimized for 3D NAND
• SSD Lifespan Monitoring
–
–
Enables SMART command-based alerts
indicating the remaining useful product life
and device information
• NAND Configuration
–
3 bits per cell (3D TLC NAND)
DDR50: 1.8V signaling (up to 50 MHz,
sampled on both clock edges) up to 50MB/sec
*timing in 1.8V signaling differs from that of 3.3V signaling
• Endurance
–
3K P/E cycles
–
Sequential data read / write:
Up to 95 MB/s / Up to 30 MB/s**
**measured using 128 KByte transfer size
• Operating Temperature Range
–
Industrial: -40°C to 85°C
• SD and microSD Card Form Factors
• Power Management
–
–
SD card: 32 x 24 x 2.1 mm
microSD card: 15 x 11 x 1.0 mm
–
–
3.3V power supply
2.7V ~ 3.6V operating voltage range with
2 Type signaling (1.8V and 3.3V)
• Capacity
–
High Capacity SD / microSD Card
• Power Consumption
(SDHC / microSDHC): 32GB
–
–
Active mode: < 400 mA
Standby mode: < 1 mA
–
Extended Capacity SD Card / microSD Card
(SDXC / SDXC): 64GB, 128GB, 256GB
• ESD Protection
• All Devices are RoHS Compliant
–
+4KV/-4KV (contact pads)
Product Description
The GLS93SP032G3 / 064G3 / 128G3 / 256G3 (SD
form factor) and GLS93MP032G3 / 064G3 / 128G3 /
256G3 (microSD form factor) Industrial Temperature
SD / microSD ArmourDrive™ PX Series (referred to
as “SD/microSD ArmourDrive” in this factsheet) are
high-performance, low-power flash memory cards.
They combine 32, 64, 128 or 256 GBytes of NAND
flash memory with an advanced NAND controller in
standard SD and microSD card form factors.
The NAND flash controller with built-in advanced
NAND management firmware communicates with the
host through the standard SD / SPI protocol. It does
not require any additional or proprietary software such
as the Flash File System (FFS) and Memory
Technology Driver (MTD). The firmware effectively
optimizes the use of NAND flash memory’s
program/erase (P/E) cycles and minimizes write
amplification.
SD/microSD ArmourDrive is ideal for applications that
require hot-swappable, small form factor data storage
with high shock-resistance. SD/microSD cards are
widely used in transportation systems, industrial
automation, vending and gaming machines, medical
computing, professional video and photo cameras,
set-top boxes and point-of-sales (POS) equipment.
These industrial removable memory cards surpass
consumer memory cards in their security, reliability
and ruggedness.
SD/microSD
ArmourDrive’s
advanced
NAND
management technology improves endurance,
enhances data security and helps prevent data loss
during unexpected power loss events. This innovative
technology combines robust NAND controller
hardware error correction capabilities with advanced
wear-leveling algorithms and bad block management
to improve data reliability and significantly extend the
life of the product.
These specifications are subject to change without notice.
© 2019 Greenliant
10/18/2019
S71477-01
1
GLS93SPxxxG3 / GLS93MPxxxG3
Industrial Temp SD / microSD ArmourDrive™ PX Series
Factsheet 01.000
October 2019
1.0
GENERAL DESCRIPTION
Each SD/microSD ArmourDrive integrates a NAND flash memory controller with NAND flash in a multi-chip
package. Refer to Figure 2-1 for the SD/microSD ArmourDrive block diagram.
1.1.5 Error Correction Code (ECC)
1.1
Optimized SD/microSD ArmourDrive
The ECC technology uses advanced algorithms to
detect and correct errors, ensuring data integrity and
extending the SSD lifespan.
The heart of SD/microSD ArmourDrive is the NAND
flash memory controller, which translates standard SD
/ SPI signals into flash media data and control signals.
The following components contribute to SD/microSD
ArmourDrive’s operation.
1.1.6 Multi-tasking Interface
The multi-tasking interface enables concurrent Read,
Program and Erase operations to multiple NAND flash
media.
1.1.1 Microcontroller Unit (MCU)
The MCU translates SD/SPI commands into data and
control signals required for flash media operation.
1.2
Advanced NAND Management
1.1.2 Power Management Unit (PMU)
SD/microSD ArmourDrive’s controller uses advanced
wear-leveling algorithms to substantially increase the
longevity of NAND flash media. Wear caused by data
writes is evenly distributed across all available blocks
in the device that prevents “hot spots” in locations that
are programmed and erased extensively. This
effective wear-leveling technique results in optimized
device endurance, enhanced data retention and
higher reliability required by long-life applications.
The PMU controls the power consumption of
SD/microSD ArmourDrive. The PMU dramatically
reduces the power consumption of SD/microSD
ArmourDrive by putting the part of the circuitry that is
not in operation into sleep mode.
The Flash File System handles inadvertent power
interrupts and has auto-recovery capability to ensure
SD/microSD ArmourDrive firmware integrity.
1.1.3 Embedded Flash File System
1.2.1 SMART Support
The embedded flash file system is an integral part of
SD/microSD ArmourDrive. It contains MCU firmware
that performs the following tasks:
Industrial SD/microSD ArmourDrive memory cards
use Self-Monitoring, Analysis and Reporting
Technology (SMART) for automatic monitoring and
reporting of the device’s health and remaining usage
life. With SMART support for advanced notifications,
preventive actions can be taken by the host to
minimize any irreversible data loss and ensure data
integrity.
1. Translates host side signals into flash media
writes and reads
2. Provides flash media wear leveling to spread the
flash writes across all memory address space to
increase the longevity of flash media
3. Keeps track of data file structures
1.1.4 Power Interrupt Data Protection
Power Interrupt Data Protection is a mechanism to
help prevent data loss during unexpected power
failure events. Enhanced data integrity is supported by
the controller’s advanced firmware during abnormal
power loss.
These specifications are subject to change without notice.
© 2019 Greenliant
10/18/2019
S71477-01
2
GLS93SPxxxG3 / GLS93MPxxxG3
Industrial Temp SD / microSD ArmourDrive™ PX Series
Factsheet 01.000
October 2019
2.0
FUNCTIONAL BLOCKS
Figure 2-1: SD / microSD ArmourDrive Block Diagram
These specifications are subject to change without notice.
© 2019 Greenliant
10/18/2019
S71477-01
3
GLS93SPxxxG3 / GLS93MPxxxG3
Industrial Temp SD / microSD ArmourDrive™ PX Series
Factsheet 01.000
October 2019
3.0
3.1
APPENDIX
Product Ordering Information
GLS 93 xP
XX XX
xxx G3 - I - BZ8xx
XXX XX - X - XXXXX
Ordering Code
BZ8xx = SD / microSD ArmourDrive
Revision
Operating Temperature
I = Industrial: -40°C to +85°C
NAND Configuration
3 = 3 bits per cell
GByte Designator
G = GByte
Capacity
032 = 32 GByte
064 = 64 GByte
128 = 128 GByte
256 = 256 GByte
Product Generation
P = Generation
Form Factor
S = SD
M = microSD
Product Family
93 = SD / micro SD ArmourDrive
These specifications are subject to change without notice.
© 2019 Greenliant
10/18/2019
S71477-01
4
GLS93SPxxxG3 / GLS93MPxxxG3
Industrial Temp SD / microSD ArmourDrive™ PX Series
Factsheet 01.000
October 2019
Valid Combinations
Valid product combinations are those that are in the mass production or will be in the mass production. Consult
your Greenliant sales representative to confirm availability of the valid combinations and to determine availability
of new product combinations.
Table 3-1: SD ArmourDrive Product Valid Ordering Numbers
Capacity
Operating Temperature
Industrial (-40°C to 85°C)
Industrial (-40°C to 85°C)
Industrial (-40°C to 85°C)
Industrial (-40°C to 85°C)
Part Number
Form Factor
SD card
32GB
GLS93SP032G3-I-BZ802
GLS93SP064G3-I-BZ802
GLS93SP128G3-I-BZ802
GLS93SP256G3-I-BZ802
64GB
SD card
128GB
256GB
SD card
SD card
Table 3-2: microSD ArmourDrive Product Valid Ordering Numbers
Capacity
Operating Temperature
Industrial (-40°C to 85°C)
Industrial (-40°C to 85°C)
Industrial (-40°C to 85°C)
Industrial (-40°C to 85°C)
Part Number
Form Factor
microSD card
microSD card
microSD card
microSD card
32GB
GLS93MP032G3-I-BZ800
GLS93MP064G3-I-BZ800
GLS93MP128G3-I-BZ800
GLS93MP256G3-I-BZ800
64GB
128GB
256GB
These specifications are subject to change without notice.
© 2019 Greenliant
10/18/2019
S71477-01
5
GLS93SPxxxG3 / GLS93MPxxxG3
Industrial Temp SD / microSD ArmourDrive™ PX Series
Factsheet 01.000
October 2019
3.2
Product Diagrams
SIDE VIEW
TOP VIEW
BOTTOM VIEW
Note:
All dimensions are in millimeters, unless otherwise specified.
Figure 3-1: SD ArmourDrive Dimensions
These specifications are subject to change without notice.
© 2019 Greenliant
10/18/2019
S71477-01
6
GLS93SPxxxG3 / GLS93MPxxxG3
Industrial Temp SD / microSD ArmourDrive™ PX Series
Factsheet 01.000
October 2019
SIDE VIEW
TOP VIEW
BOTTOM VIEW
Note:
All dimensions are in millimeters, unless otherwise specified.
Figure 3-2: microSD ArmourDrive Dimensions
These specifications are subject to change without notice.
© 2019 Greenliant
10/18/2019
S71477-01
7
GLS93SPxxxG3 / GLS93MPxxxG3
Industrial Temp SD / microSD ArmourDrive™ PX Series
Factsheet 01.000
October 2019
Revision History
Revision
Description
Date
01.000
Initial release as Factsheet
October 18, 2019
© 2019 Greenliant. All rights reserved.
Greenliant and the Greenliant logo are registered trademarks, and ArmourDrive is a trademark of Greenliant. All
other trademarks and registered trademarks are the property of their respective owners.
Specifications are subject to change without notice. Memory sizes denote raw storage capacity; actual usable
capacity may be less.
Greenliant makes no warranty for the use of its products other than those expressly contained in the Greenliant
Terms and Conditions of Sale.
www.greenliant.com
These specifications are subject to change without notice.
© 2019 Greenliant
10/18/2019
S71477-01
8
相关型号：
©2020 ICPDF网 联系我们和版权申明