GS8160Z18DGT-250T [GSI]
ZBT SRAM, 1MX18, 5.5ns, CMOS, PQFP100, ROHS COMPLIANT, TQFP-100;型号: | GS8160Z18DGT-250T |
厂家: | GSI TECHNOLOGY |
描述: | ZBT SRAM, 1MX18, 5.5ns, CMOS, PQFP100, ROHS COMPLIANT, TQFP-100 静态存储器 |
文件: | 总23页 (文件大小:343K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
GS8160Z18/36DGT-400/375/333/250/200/150
400 MHz–150 MHz
100-Pin TQFP
Commercial Temp
Industrial Temp
18Mb Pipelined and Flow Through
Synchronous NBT SRAMs
2.5 V or 3.3 V V
DD
2.5 V or 3.3 V I/O
Because it is a synchronous device, address, data inputs, and
read/ write control inputs are captured on the rising edge of the
input clock. Burst order control (LBO) must be tied to a power
rail for proper operation. Asynchronous inputs include the
Sleep mode enable (ZZ) and Output Enable. Output Enable can
be used to override the synchronous control of the output
drivers and turn the RAM's output drivers off at any time.
Write cycles are internally self-timed and initiated by the rising
edge of the clock input. This feature eliminates complex off-
chip write pulse generation required by asynchronous SRAMs
and simplifies input signal timing.
Features
• NBT (No Bus Turn Around) functionality allows zero wait
read-write-read bus utilization; Fully pin-compatible with
both pipelined and flow through NtRAM™, NoBL™ and
ZBT™ SRAMs
• 2.5 V or 3.3 V +10%/–10% core power supply
• 2.5 V or 3.3 V I/O supply
• User-configurable Pipeline and Flow Through mode
• LBO pin for Linear or Interleave Burst mode
• Pin compatible with 2Mb, 4Mb, 8Mb, 36Mb, 72Mb and
144Mb devices
• Byte write operation (9-bit Bytes)
• 3 chip enable signals for easy depth expansion
• ZZ Pin for automatic power-down
The GS8160Z18/36DGT may be configured by the user to
operate in Pipeline or Flow Through mode. Operating as a
pipelined synchronous device, meaning that in addition to the
rising edge triggered registers that capture input signals, the
device incorporates a rising-edge-triggered output register. For
read cycles, pipelined SRAM output data is temporarily stored
by the edge triggered output register during the access cycle
and then released to the output drivers at the next rising edge of
clock.
• RoHS-compliant 100-lead TQFP package available
Functional Description
The GS8160Z18/36DGT is an 18Mbit Synchronous Static
SRAM. GSI's NBT SRAMs, like ZBT, NtRAM, NoBL or
other pipelined read/double late write or flow through read/
single late write SRAMs, allow utilization of all available bus
bandwidth by eliminating the need to insert deselect cycles
when the device is switched from read to write cycles.
Parameter Synopsis
-400
-375
-333
-250
-200
-150
Unit
t
2.5
2.5
2.5
2.66
2.5
3.3
2.5
4.0
3.0
5.0
3.8
6.7
ns
ns
KQ
Pipeline
3-1-1-1
tCycle
Curr (x18)
Curr (x36)
370
430
350
410
310
365
250
290
210
240
185
200
mA
mA
t
4.0
4.0
4.2
4.2
4.5
4.5
5.5
5.5
6.5
6.5
7.5
7.5
ns
ns
KQ
Flow
Through
2-1-1-1
tCycle
Curr (x18)
Curr (x36)
275
315
265
300
255
285
220
250
205
225
190
205
mA
mA
Rev: 1.03b 9/2013
1/23
© 2011, GSI Technology
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
GS8160Z18/36DGT-400/375/333/250/200/150
GS8160Z18D Pinout
100 99 98 97 96 95 94 93 92 91 90 89 88 87 86 85 84 83 82 81
A
NC
NC
NC
1
2
3
4
5
6
7
8
9
80
79
78
77
76
75
74
73
72
71
70
69
68
67
66
65
64
63
62
61
60
59
58
57
56
55
54
53
52
51
NC
NC
V
V
NC
DQPA
DQA
DQA
V
V
DQA
DQA
V
NC
V
ZZ
DQA
DQA
V
V
V
DDQ
DDQ
V
SS
SS
NC
NC
DQB
DQB
1M x 18
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
V
SS
SS
Top View
V
DDQ
DDQ
DQB
DQB
FT
SS
V
DD
NC
DD
V
SS
DQB
DQB
V
DDQ
DDQ
V
SS
SS
DQA
DQA
NC
NC
V
DQB
DQB
DQPB
NC
V
SS
SS
V
V
DDQ
DDQ
NC
NC
NC
NC
NC
NC
31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50
Rev: 1.03b 9/2013
2/23
© 2011, GSI Technology
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
GS8160Z18/36DGT-400/375/333/250/200/150
GS8160Z36D Pinout
100 99 98 97 96 95 94 93 92 91 90 89 88 87 86 85 84 83 82 81
DQPB
DQB
DQB
DQPC
DQC
DQC
1
2
3
4
5
6
7
8
9
80
79
78
77
76
75
74
73
72
71
70
69
68
67
66
65
64
63
62
61
60
59
58
57
56
55
54
53
52
51
V
V
DDQ
DDQ
V
V
SS
SS
DQB
DQB
DQB
DQB
DQC
DQC
DQC
DQC
512K x 36
V
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
V
SS
SS
V
Top View
V
DDQ
DDQ
DQB
DQB
DQC
DQC
FT
V
SS
NC
V
DD
V
NC
DD
ZZ
DQA
DQA
V
SS
DQD
DQD
V
V
DDQ
DDQ
V
V
SS
SS
DQA
DQA
DQA
DQA
DQD
DQD
DQD
DQD
V
V
SS
SS
V
V
DDQ
DDQ
DQA
DQA
DQPA
DQD
DQD
DQPD
31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50
Rev: 1.03b 9/2013
3/23
© 2011, GSI Technology
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
GS8160Z18/36DGT-400/375/333/250/200/150
100-Pin TQFP Pin Descriptions
Symbol
A0, A1
A
Type
In
Description
Burst Address Inputs; Preload the burst counter
In
Address Inputs
Clock Input Signal
CK
In
BA
In
Byte Write signal for data inputs DQA1-DQA9; active low
Byte Write signal for data inputs DQB1-DQB9; active low
Byte Write signal for data inputs DQC1-DQC9; active low
Byte Write signal for data inputs DQD1-DQD9; active low
Write Enable; active low
BB
In
BC
In
BD
In
W
In
E1
In
Chip Enable; active low
E2
In
Chip Enable; Active High. For self decoded depth expansion
Chip Enable; Active Low. For self decoded depth expansion
Output Enable; active low
E3
In
G
In
ADV
CKE
DQA
DQB
DQC
DQD
ZZ
In
Advance/Load; Burst address counter control pin
Clock Input Buffer Enable; active low
Byte A Data Input and Output pins
In
I/O
I/O
I/O
I/O
In
Byte B Data Input and Output pins
Byte C Data Input and Output pins
Byte D Data Input and Output pins
Power down control; active high
FT
In
Pipeline/Flow Through Mode Control; active low
Linear Burst Order; active low
LBO
In
V
In
Core power supply
DD
V
In
In
Ground
Output driver power supply
No Connect
SS
V
DDQ
NC
—
Rev: 1.03b 9/2013
4/23
© 2011, GSI Technology
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
GS8160Z18/36DGT-400/375/333/250/200/150
GS8160Z18/36D NBT SRAM Functional Block Diagram
s
e s A m S p e n
s
i t r e W D r i v e r
Rev: 1.03b 9/2013
5/23
© 2011, GSI Technology
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
GS8160Z18/36DGT-400/375/333/250/200/150
Functional Details
Clocking
Deassertion of the Clock Enable (CKE) input blocks the Clock input from reaching the RAM's internal circuits. It may be used to
suspend RAM operations. Failure to observe Clock Enable set-up or hold requirements will result in erratic operation.
Pipeline Mode Read and Write Operations
All inputs (with the exception of Output Enable, Linear Burst Order and Sleep) are synchronized to rising clock edges. Single cycle
read and write operations must be initiated with the Advance/Load pin (ADV) held low, in order to load the new address. Device
activation is accomplished by asserting all three of the Chip Enable inputs (E1, E2 and E3). Deassertion of any one of the Enable
inputs will deactivate the device.
Function
Read
W
H
L
BA
X
BB
X
BC
X
BD
X
Write Byte “a”
Write Byte “b”
Write Byte “c”
Write Byte “d”
Write all Bytes
Write Abort/NOP
L
H
L
H
H
L
H
H
H
L
L
H
H
H
L
L
H
H
L
L
H
L
L
L
L
H
H
H
H
Read operation is initiated when the following conditions are satisfied at the rising edge of clock: CKE is asserted Low, all three
chip enables (E1, E2, and E3) are active, the write enable input signals W is deasserted high, and ADV is asserted low. The address
presented to the address inputs is latched in to address register and presented to the memory core and control logic. The control
logic determines that a read access is in progress and allows the requested data to propagate to the input of the output register. At
the next rising edge of clock the read data is allowed to propagate through the output register and onto the output pins.
Write operation occurs when the RAM is selected, CKE is active, and the Write input is sampled low at the rising edge of clock.
The Byte Write Enable inputs (BA, BB, BC, & BD) determine which bytes will be written. All or none may be activated. A write
cycle with no Byte Write inputs active is a no-op cycle. The pipelined NBT SRAM provides double late write functionality,
matching the write command versus data pipeline length (2 cycles) to the read command versus data pipeline length (2 cycles). At
the first rising edge of clock, Enable, Write, Byte Write(s), and Address are registered. The Data In associated with that address is
required at the third rising edge of clock.
Flow Through Mode Read and Write Operations
Operation of the RAM in Flow Through mode is very similar to operations in Pipeline mode. Activation of a Read Cycle and the
use of the Burst Address Counter is identical. In Flow Through mode the device may begin driving out new data immediately after
new address are clocked into the RAM, rather than holding new data until the following (second) clock edge. Therefore, in Flow
Through mode the read pipeline is one cycle shorter than in Pipeline mode.
Write operations are initiated in the same way, but differ in that the write pipeline is one cycle shorter as well, preserving the ability
to turn the bus from reads to writes without inserting any dead cycles. While the pipelined NBT RAMs implement a double late
write protocol, in Flow Through mode a single late write protocol mode is observed. Therefore, in Flow Through mode, address
and control are registered on the first rising edge of clock and data in is required at the data input pins at the second rising edge of
clock.
Rev: 1.03b 9/2013
6/23
© 2011, GSI Technology
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
GS8160Z18/36DGT-400/375/333/250/200/150
Synchronous Truth Table
Operation
Read Cycle, Begin Burst
Read Cycle, Continue Burst
NOP/Read, Begin Burst
Dummy Read, Continue Burst
Write Cycle, Begin Burst
Write Abort, Begin Burst
Write Cycle, Continue Burst
Write Abort, Continue Burst
Deselect Cycle, Power Down
Deselect Cycle, Power Down
Deselect Cycle, Power Down
Deselect Cycle, Continue
Sleep Mode
Type
R
Address
External
Next
CK CKE ADV
W
H
X
H
X
L
Bx E1 E2 E3
G
L
ZZ
L
L
L
L
L
L
L
L
L
L
L
L
H
L
DQ
Q
Notes
L-H
L-H
L-H
L-H
L-H
L-H
L-H
L-H
L-H
L-H
L-H
L-H
X
L
L
L
L
L
L
L
L
L
L
L
L
X
H
L
H
L
X
X
X
X
L
L
X
L
H
X
H
X
H
H
X
X
X
X
L
L
X
L
B
L
Q
1,10
2
1,2,10
3
R
External
Next
H
H
X
X
X
X
X
X
X
X
X
X
High-Z
High-Z
D
B
H
L
X
L
X
L
W
D
External
None
1
L
L
H
L
L
L
High-Z
D
1,3,10
B
Next
H
H
L
X
X
X
X
X
X
X
X
X
X
H
X
X
X
X
X
X
X
X
H
X
X
X
X
B
Next
H
X
X
X
X
X
X
High-Z 1,2,3,10
High-Z
D
None
D
None
L
High-Z
D
None
L
High-Z
1
4
D
None
H
X
X
X
X
X
High-Z
High-Z
-
None
Clock Edge Ignore, Stall
Current
L-H
Notes:
1. Continue Burst cycles, whether read or write, use the same control inputs. A Deselect continue cycle can only be entered into if a Deselect
cycle is executed first.
2. Dummy Read and Write abort can be considered NOPs because the SRAM performs no operation. A Write abort occurs when the W pin is
sampled low but no Byte Write pins are active so no write operation is performed.
3. G can be wired low to minimize the number of control signals provided to the SRAM. Output drivers will automatically turn off during write
cycles.
4. If CKE High occurs during a pipelined read cycle, the DQ bus will remain active (Low Z). If CKE High occurs during a write cycle, the bus
will remain in High Z.
5. X = Don’t Care; H = Logic High; L = Logic Low; Bx = High = All Byte Write signals are high; Bx = Low = One or more Byte/Write signals
are Low
6. All inputs, except G and ZZ must meet setup and hold times of rising clock edge.
7. Wait states can be inserted by setting CKE high.
8. This device contains circuitry that ensures all outputs are in High Z during power-up.
9. A 2-bit burst counter is incorporated.
10. The address counter is incriminated for all Burst continue cycles.
Rev: 1.03b 9/2013
7/23
© 2011, GSI Technology
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
GS8160Z18/36DGT-400/375/333/250/200/150
Pipeline and Flow Through Read Write Control State Diagram
D
B
Deselect
R
D
D
W
New Read
New Write
R
R
W
B
B
R
W
W
R
Burst Read
Burst Write
B
B
D
D
Key
Notes:
Input Command Code
1. The Hold command (CKE Low) is not
shown because it prevents any state change.
ƒ
Transition
2. W, R, B and D represent input command
codes ,as indicated in the Synchronous Truth Table.
Current State (n)
Next State (n+1)
n
n+1
n+2
n+3
Clock (CK)
Command
ƒ
ƒ
ƒ
ƒ
Current State
Next State
Current State and Next State Definition for Pipeline and Flow Through Read/Write Control State Diagram
Rev: 1.03b 9/2013
8/23
© 2011, GSI Technology
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
GS8160Z18/36DGT-400/375/333/250/200/150
Pipeline Mode Data I/O State Diagram
Intermediate
Intermediate
R
W
B
Intermediate
B
R
Data Out
(Q Valid)
High Z
(Data In)
W
D
Intermediate
D
Intermediate
W
R
High Z
B
D
Intermediate
Key
Notes:
Input Command Code
1. The Hold command (CKE Low) is not
shown because it prevents any state change.
ƒ
Transition
Transition
2. W, R, B, and D represent input command
codes as indicated in the Truth Tables.
Current State (n)
Next State (n+2)
Intermediate State (N+1)
n
n+1
n+2
n+3
Clock (CK)
Command
ƒ
ƒ
ƒ
ƒ
Intermediate
State
Current State
Next State
Current State and Next State Definition for Pipeline Mode Data I/O State Diagram
Rev: 1.03b 9/2013
9/23
© 2011, GSI Technology
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
GS8160Z18/36DGT-400/375/333/250/200/150
Flow Through Mode Data I/O State Diagram
R
W
B
B
R
Data Out
(Q Valid)
High Z
(Data In)
W
D
D
W
R
High Z
B
D
Key
Notes
Input Command Code
1. The Hold command (CKE Low) is not
shown because it prevents any state change.
ƒ
Transition
2. W, R, B and D represent input command
codes as indicated in the Truth Tables.
Current State (n)
Next State (n+1)
n
n+1
n+2
n+3
Clock (CK)
Command
ƒ
ƒ
ƒ
ƒ
Current State
Next State
Current State and Next State Definition for: Pipeline and Flow Through Read Write Control State Diagram
Rev: 1.03b 9/2013
10/23
© 2011, GSI Technology
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
GS8160Z18/36DGT-400/375/333/250/200/150
Burst Cycles
Although NBT RAMs are designed to sustain 100% bus bandwidth by eliminating turnaround cycle when there is transition from
read to write, multiple back-to-back reads or writes may also be performed. NBT SRAMs provide an on-chip burst address
generator that can be utilized, if desired, to further simplify burst read or write implementations. The ADV control pin, when
driven high, commands the SRAM to advance the internal address counter and use the counter generated address to read or write
the SRAM. The starting address for the first cycle in a burst cycle series is loaded into the SRAM by driving the ADV pin low, into
Load mode.
Burst Order
The burst address counter wraps around to its initial state after four addresses (the loaded address and three more) have been
accessed. The burst sequence is determined by the state of the Linear Burst Order pin (LBO). When this pin is low, a linear burst
sequence is selected. When the RAM is installed with the LBO pin tied high, Interleaved burst sequence is selected. See the tables
below for details.
Mode Pin Functions
Mode Name
Pin Name
State
Function
Linear Burst
Interleaved Burst
Flow Through
Pipeline
L
Burst Order Control
LBO
H
L
Output Register Control
Power Down Control
FT
ZZ
H or NC
L or NC
H
Active
Standby, IDD = ISB
Note:
There is a pull-up device on the FT pin and a pull-down device on the ZZ pin , so this input pin can be unconnected and the chip will operate in
the default states as specified in the above tables.
Burst Counter Sequences
Linear Burst Sequence
Interleaved Burst Sequence
A[1:0]
00
A[1:0]
01
A[1:0]
10
A[1:0]
11
A[1:0]
A[1:0]
01
A[1:0]
10
A[1:0]
11
1st address
2nd address
3rd address
4th address
1st address
2nd address
3rd address
4th address
00
01
10
11
01
10
11
10
11
00
00
11
10
11
00
01
11
00
01
00
01
10
10
01
00
Note:
The burst counter wraps to initial state on the 5th clock.
Note:
The burst counter wraps to initial state on the 5th clock.
Rev: 1.03b 9/2013
11/23
© 2011, GSI Technology
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
GS8160Z18/36DGT-400/375/333/250/200/150
Sleep Mode
During normal operation, ZZ must be pulled low, either by the user or by it’s internal pull down resistor. When ZZ is pulled high,
the SRAM will enter a Power Sleep mode after 2 cycles. At this time, internal state of the SRAM is preserved. When ZZ returns to
low, the SRAM operates normally after 2 cycles of wake up time.
Sleep mode is a low current, power-down mode in which the device is deselected and current is reduced to I 2. The duration of
SB
Sleep mode is dictated by the length of time the ZZ is in a high state. After entering Sleep mode, all inputs except ZZ become
disabled and all outputs go to High-Z The ZZ pin is an asynchronous, active high input that causes the device to enter Sleep mode.
When the ZZ pin is driven high, I 2 is guaranteed after the time tZZI is met. Because ZZ is an asynchronous input, pending
SB
operations or operations in progress may not be properly completed if ZZ is asserted. Therefore, Sleep mode must not be initiated
until valid pending operations are completed. Similarly, when exiting Sleep mode during tZZR, only a deselect or read commands
may be applied while the SRAM is recovering from Sleep mode.
Sleep Mode Timing Diagram
tKH
tKC
tKL
CK
ZZ
tZZR
tZZS
tZZH
Designing for Compatibility
The GSI NBT SRAMs offer users a configurable selection between Flow Through mode and Pipeline mode via the FT signal
found on Pin 14. Not all vendors offer this option, however most mark Pin 14 as V or V
on pipelined parts and V on flow
DD
DDQ
SS
through parts. GSI NBT SRAMs are fully compatible with these sockets.
Rev: 1.03b 9/2013
12/23
© 2011, GSI Technology
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
GS8160Z18/36DGT-400/375/333/250/200/150
Absolute Maximum Ratings
(All voltages reference to V
)
SS
Symbol
VDD
VDDQ
VI/O
Description
Value
Unit
V
Voltage on VDD Pins
Voltage in VDDQ Pins
–0.5 to 4.6
–0.5 to VDD
V
–0.5 to VDD +0.5 ( 4.6 V max.)
–0.5 to VDD +0.5 ( 4.6 V max.)
Voltage on I/O Pins
Voltage on Other Input Pins
Input Current on Any Pin
Output Current on Any I/O Pin
Package Power Dissipation
Storage Temperature
V
VIN
V
IIN
+/–20
+/–20
mA
mA
W
IOUT
PD
1.5
oC
oC
TSTG
–55 to 125
–55 to 125
TBIAS
Temperature Under Bias
Note:
Permanent damage to the device may occur if the Absolute Maximum Ratings are exceeded. Operation should be restricted to Recommended
Operating Conditions. Exposure to conditions exceeding the Absolute Maximum Ratings, for an extended period of time, may affect reliability of
this component.
Power Supply Voltage Ranges
Parameter
Symbol
VDD3
Min.
3.0
Typ.
3.3
Max.
3.6
Unit
V
3.3 V Supply Voltage
VDD2
2.5 V Supply Voltage
2.3
2.5
2.7
V
3.3 V VDDQ I/O Supply Voltage
2.5 V VDDQ I/O Supply Voltage
VDDQ3
VDDQ2
3.0
3.3
3.6
V
2.3
2.5
2.7
V
V
Range Logic Levels
DD3
Parameter
Symbol
VIH
Min.
2.0
Typ.
—
Max.
Unit
V
VDD + 0.3
Input High Voltage
Input Low Voltage
VIL
–0.3
—
0.8
V
Notes:
1.
V
(max) must be met for any instantaneous value of V .
DD
IH
2.
V
needs to power-up before or at the same time as V
to make sure V (max) is not exceeded.
IH
DD
DDQ
Rev: 1.03b 9/2013
13/23
© 2011, GSI Technology
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
GS8160Z18/36DGT-400/375/333/250/200/150
V
Range Logic Levels
DD2
Parameter
Symbol
VIH
Min.
Typ.
—
Max.
Unit
V
0.6*VDD
VDD + 0.3
0.3*VDD
Input High Voltage
Input Low Voltage
VIL
–0.3
—
V
Notes:
1.
V
(max) must be met for any instantaneous value of V .
DD
IH
2.
V
needs to power-up before or at the same time as V
to make sure V (max) is not exceeded.
IH
DD
DDQ
Operating Temperature
Parameter
Symbol
Min.
Typ.
Max.
Unit
Junction Temperature
(Commercial Range Versions)
TJ
0
25
85
C
C
Junction Temperature
(Industrial Range Versions)*
TJ
–40
25
100
Note:
* The part numbers of Industrial Temperature Range versions end with the character “I”. Unless otherwise noted, all performance specifications
quoted are evaluated for worst case in the temperature range marked on the device.
Thermal Impedance
Test PCB
Substrate
JA (C°/W)
Airflow = 0 m/s
JA (C°/W)
Airflow = 1 m/s
JA (C°/W)
Airflow = 2 m/s
Package
JB (C°/W)
JC (C°/W)
100 TQFP
4-layer
35.7
31.0
29.4
27.0
8.4
Notes:
1. Thermal Impedance data is based on a number of samples from mulitple lots and should be viewed as a typical number.
2. Please refer to JEDEC standard JESD51-6.
3. The characteristics of the test fixture PCB influence reported thermal characteristics of the device. Be advised that a good thermal path to
the PCB can result in cooling or heating of the RAM depending on PCB temperature.
Undershoot Measurement and Timing
Overshoot Measurement and Timing
V
IH
20% tKC
V
+ 2.0 V
DD
V
SS
50%
50%
V
DD
V
– 2.0 V
SS
20% tKC
V
IL
Note:
Input Under/overshoot voltage must be –2 V > Vi < V +2 V not to exceed 4.6 V maximum, with a pulse width not to exceed 20% tKC.
DDn
Rev: 1.03b 9/2013
14/23
© 2011, GSI Technology
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
GS8160Z18/36DGT-400/375/333/250/200/150
Capacitance
o
(T = 25 C, f = 1 MHZ, V = 2.5 V)
A
DD
Parameter
Symbol
CIN
Test conditions
VIN = 0 V
Typ.
Max.
Unit
pF
Input Capacitance
4
6
5
7
CI/O
VOUT = 0 V
Input/Output Capacitance
pF
Note:
These parameters are sample tested.
AC Test Conditions
Parameter
Conditions
VDD – 0.2 V
Input high level
Input low level
0.2 V
1 V/ns
VDD/2
Input slew rate
Input reference level
VDDQ/2
Output reference level
Output load
Fig. 1
Notes:
1. Include scope and jig capacitance.
2. Test conditions as specified with output loading as shown in Fig. 1 unless otherwise noted.
3. Device is deselected as defined by the Truth Table.
Output Load 1
DQ
*
50
30pF
V
DDQ/2
* Distributed Test Jig Capacitance
Rev: 1.03b 9/2013
15/23
© 2011, GSI Technology
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
GS8160Z18/36DGT-400/375/333/250/200/150
DC Electrical Characteristics
Parameter
Symbol
Test Conditions
Min
Max
Input Leakage Current
(except mode pins)
IIL
VIN = 0 to VDD
–1 uA
1 uA
VDD VIN VIH
0 V VIN VIH
–1 uA
–1 uA
1 uA
100 uA
IIN1
ZZ Input Current
FT Input Current
VDD VIN VIL
0 V VIN VIL
–100 uA
–1 uA
1 uA
1 uA
IIN2
IOL
Output Disable, VOUT = 0 to VDD
IOH = –8 mA, VDDQ = 2.375 V
IOH = –8 mA, VDDQ = 3.135 V
IOL = 8 mA
Output Leakage Current
Output High Voltage
Output High Voltage
Output Low Voltage
–1 uA
1.7 V
2.4 V
—
1 uA
—
VOH2
VOH3
VOL
—
0.4 V
Rev: 1.03b 9/2013
16/23
© 2011, GSI Technology
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
GS8160Z18/36DGT-400/375/333/250/200/150
Rev: 1.03b 9/2013
17/23
© 2011, GSI Technology
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
GS8160Z18/36DGT-400/375/333/250/200/150
AC Electrical Characteristics
-400
-375
-333
-250
-200
-150
Parameter
Symbol
Min Max Min Max Min Max Min Max Min Max Min Max
Clock Cycle Time
tKC
tKQ
2.5
—
—
2.5
—
—
—
—
—
4.0
—
—
—
—
—
—
2.66
—
—
2.5
—
—
—
—
—
4.2
—
—
—
—
—
—
3.3
—
—
2.5
—
—
—
—
—
4.5
—
—
—
—
—
—
4.0
—
—
2.5
—
—
—
—
—
5.5
—
—
—
—
—
—
5.0
—
—
3.0
—
—
—
—
—
6.5
—
—
—
—
—
—
6.7
—
—
ns
Clock to Output Valid
3.8 ns
Clock to Output Invalid
Pipeline
tKQX
1.5
1.5
0.9
0.1
4.0
—
1.5
1.5
0.9
0.1
4.2
—
1.5
1.5
1.0
0.1
4.5
—
1.5
1.5
1.2
0.2
5.5
—
1.5
1.5
1.4
0.4
6.5
—
1.5
1.5
1.5
0.5
7.5
—
—
—
—
—
—
ns
ns
ns
ns
ns
1
Clock to Output in Low-Z
tLZ
Setup time
Hold time
tS
tH
Clock Cycle Time
Clock to Output Valid
tKC
tKQ
tKQX
7.5 ns
Clock to Output Invalid
2.0
2.0
1.2
0.2
0.9
1.1
2.0
2.0
1.2
0.2
0.9
1.1
2.0
2.0
1.3
0.3
1.0
1.2
2.0
2.0
1.5
0.5
1.3
1.5
2.0
2.0
1.5
0.5
1.3
1.5
2.0
2.0
1.5
0.5
1.5
1.7
—
—
—
—
—
—
ns
ns
ns
ns
ns
ns
Flow
Through
1
Clock to Output in Low-Z
Setup time
tLZ
tS
tH
Hold time
Clock HIGH Time
Clock LOW Time
tKH
tKL
Clock to Output in
High-Z
1
1.5 2.5 1.5 2.5 1.5 2.5 1.5 2.5 1.5 3.0 1.5 3.8 ns
tHZ
G to Output Valid
G to output in Low-Z
G to output in High-Z
ZZ setup time
tOE
—
0
2.5
—
2.5
—
—
—
—
0
2.5
—
2.5
—
—
—
—
0
2.5
—
2.5
—
—
—
—
0
2.5
—
2.5
—
—
—
—
0
3.0
—
3.0
—
—
—
—
0
3.8 ns
ns
3.8 ns
1
—
tOLZ
1
—
5
—
5
—
5
—
5
—
5
—
5
tOHZ
2
—
—
—
ns
ns
ns
tZZS
2
ZZ hold time
1
1
1
1
1
1
tZZH
ZZ recovery
tZZR
20
20
20
20
20
20
Notes:
1. These parameters are sampled and are not 100% tested.
2. ZZ is an asynchronous signal. However, in order to be recognized on any given clock cycle, ZZ must meet the specified setup and hold
times as specified above.
Rev: 1.03b 9/2013
18/23
© 2011, GSI Technology
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
GS8160Z18/36DGT-400/375/333/250/200/150
Pipeline Mode Timimg (NBT))
Write A
Read B
Suspend
tKH
Read C
tKC
Write D
Write No-op Read E
Deselect
tKL
CK
A
tH
tH
tH
tH
tH
tH
tS
A
B
C
D
E
tS
tS
tS
tS
tS
CKE
E*
ADV
W
tH
tS
Bn
tH
tLZ
tHZ
tS
tKQ
tKQX
D(A)
Q(B)
Q(C)
D(D)
Q(E)
DQ
Rev: 1.03b 9/2013
19/23
© 2011, GSI Technology
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
GS8160Z18/36DGT-400/375/333/250/200/150
Flow Through Mode Timing (NBT)
Write A
Write B
Write B+1 Read C
tKL
Cont
Read D
Write E
Read F
Write G
tKH
tKC
CK
CKE
E
tH
tH
tH
tH
tH
tH
tS
tS
tS
tS
tS
tS
ADV
W
Bn
A0–An
A
B
C
D
E
F
G
tKQ
tLZ
tH
tKQ
tLZ
D(B+1)
tKQX
tS
D(A)
tHZ
Q(D)
tKQX
D(G)
DQ
D(B)
Q(C)
D(E)
Q(F)
tOLZ
tOE
tOHZ
G
*Note: E = High(False) if E1 = 1 or E2 = 0 or E3 = 1
Rev: 1.03b 9/2013
20/23
© 2011, GSI Technology
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
GS8160Z18/36DGT-400/375/333/250/200/150
TQFP Package Drawing (Package GT)
L
c
L1
Symbol
Description
Standoff
Min. Nom. Max
A1
A2
b
0.05
1.35
0.20
0.09
0.10
1.40
0.30
—
0.15
1.45
0.40
0.20
22.1
20.1
16.1
14.1
—
Body Thickness
Lead Width
c
Lead Thickness
D
Terminal Dimension 21.9
Package Body 19.9
Terminal Dimension 15.9
22.0
20.0
16.0
14.0
0.65
0.60
1.00
e
D1
E
b
E1
e
Package Body
Lead Pitch
13.9
—
L
Foot Length
Lead Length
Coplanarity
Lead Angle
0.45
—
0.75
—
L1
Y
A1
A2
E1
E
0.10
7
0
—
Notes:
1. All dimensions are in millimeters (mm).
2. Package width and length do not include mold protrusion.
Rev: 1.03b 9/2013
21/23
© 2011, GSI Technology
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
GS8160Z18/36DGT-400/375/333/250/200/150
Ordering Information—GSI NBT Synchronous SRAM
2
Speed
3
1
Org
Type
Package
T
Part Number
J
(MHz/ns)
1M x 18
1M x 18
GS8160Z18DGT-400
GS8160Z18DGT-375
GS8160Z18DGT-333
GS8160Z18DGT-250
GS8160Z18DGT-200
GS8160Z18DGT-150
GS8160Z36DGT-400
GS8160Z36DGT-375
GS8160Z36DGT-333
GS8160Z36DGT-250
GS8160Z36DGT-200
GS8160Z36DGT-150
GS8160Z18DGT-400I
GS8160Z18DGT-375I
GS8160Z18DGT-333I
GS8160Z18DGT-250I
GS8160Z18DGT-200I
GS8160Z18DGT-150I
GS8160Z36DGT-400I
GS8160Z36DGT-375I
GS8160Z36DGT-333I
GS8160Z36DGT-250I
GS8160Z36DGT-200I
GS8160Z36DGT-150I
NBT Pipeline/Flow Through
NBT Pipeline/Flow Through
NBT Pipeline/Flow Through
NBT Pipeline/Flow Through
NBT Pipeline/Flow Through
NBT Pipeline/Flow Through
NBT Pipeline/Flow Through
NBT Pipeline/Flow Through
NBT Pipeline/Flow Through
NBT Pipeline/Flow Through
NBT Pipeline/Flow Through
NBT Pipeline/Flow Through
NBT Pipeline/Flow Through
NBT Pipeline/Flow Through
NBT Pipeline/Flow Through
NBT Pipeline/Flow Through
NBT Pipeline/Flow Through
NBT Pipeline/Flow Through
NBT Pipeline/Flow Through
NBT Pipeline/Flow Through
NBT Pipeline/Flow Through
NBT Pipeline/Flow Through
NBT Pipeline/Flow Through
NBT Pipeline/Flow Through
RoHS-compliant TQFP
RoHS-compliant TQFP
RoHS-compliant TQFP
RoHS-compliant TQFP
RoHS-compliant TQFP
RoHS-compliant TQFP
RoHS-compliant TQFP
RoHS-compliant TQFP
RoHS-compliant TQFP
RoHS-compliant TQFP
RoHS-compliant TQFP
RoHS-compliant TQFP
RoHS-compliant TQFP
RoHS-compliant TQFP
RoHS-compliant TQFP
RoHS-compliant TQFP
RoHS-compliant TQFP
RoHS-compliant TQFP
RoHS-compliant TQFP
RoHS-compliant TQFP
RoHS-compliant TQFP
RoHS-compliant TQFP
RoHS-compliant TQFP
RoHS-compliant TQFP
400/4.0
375/4.2
333/4.5
250/5.5
200/6.5
150/7.5
400/4.0
375/4.2
333/4.5
250/5.5
200/6.5
150/7.5
400/4.0
375/4.2
333/4.5
250/5.5
200/6.5
150/7.5
400/4.0
375/4.2
333/4.5
250/5.5
200/6.5
150/7.5
C
C
C
C
C
C
C
C
C
C
C
C
I
1M x 18
1M x 18
1M x 18
1M x 18
512K x 36
512K x 36
512K x 36
512K x 36
512K x 36
512K x 36
1M x 18
1M x 18
I
1M x 18
I
1M x 18
I
1M x 18
I
1M x 18
I
512K x 36
512K x 36
512K x 36
512K x 36
512K x 36
512K x 36
I
I
I
I
I
I
Notes:
1. Customers requiring delivery in Tape and Reel should add the character “T” to the end of the part number.
Example: GS8160Z36DGT-200IT.
2. The speed column indicates the cycle frequency (MHz) of the device in Pipeline mode and the latency (ns) in Flow Through mode. Each
device is Pipeline/Flow Through mode-selectable by the user.
3. C = Commercial Temperature Range. I = Industrial Temperature Range.
4. GSI offers other versions this type of device in many different configurations and with a variety of different features, only some of which are
covered in this data sheet. See the GSI Technology web site (www.gsitechnology.com) for a complete listing of current offerings
Rev: 1.03b 9/2013
22/23
© 2011, GSI Technology
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
GS8160Z18/36DGT-400/375/333/250/200/150
18Mb Sync SRAM Datasheet Revision History
Types of Changes
File Name
Description of changes
Format or Content
• Creation of new datasheet
8160ZxxD_r1
• Addition of IDD numbers
8160ZxxD_r1_01
8160ZxxD_r1_02
Content
Content
• Updated Absolute Maximum Ratings
• Updated to reflect MP status
• (Rev1.03a: Corrrected erroneous information in part ordering
table)
8160ZxxD_r1_03
Content
• (Rev1.03b: Corrected TQFP thermal numbers)
Rev: 1.03b 9/2013
23/23
© 2011, GSI Technology
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
相关型号:
©2020 ICPDF网 联系我们和版权申明