GS82032AGT-6 [GSI]
64K x 32 2Mb Synchronous Burst SRAM; 64K ×32的2Mb同步突发SRAM型号: | GS82032AGT-6 |
厂家: | GSI TECHNOLOGY |
描述: | 64K x 32 2Mb Synchronous Burst SRAM |
文件: | 总22页 (文件大小:579K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
GS82032AT-180/166/150/133/100/66/4/5/6
180 MHz–66 MHz
TQFP
Commercial Temp
Industrial Temp
64K x 32
2Mb Synchronous Burst SRAM
3.3 V V
DD
3.3 V and 2.5 V I/O
counter may be configured to count in either linear or
Features
interleave order with the Linear Burst Order (LBO) input. The
Burst function need not be used. New addresses can be loaded
on every cycle with no degradation of chip performance.
• FT pin for user-configurable flow through or pipelined opera-
tion
• Single Cycle Deselect (SCD) operation
• 3.3 V +10%/–5% core power supply
Flow Through/Pipeline Reads
• 2.5 V or 3.3 V I/O supply
The function of the Data Output Register can be controlled by
the user via the FT mode pin (Pin 14 in the TQFP). Holding
the FT mode pin low places the RAM in Flow Through mode,
causing output data to bypass the Data Output Register.
Holding FT high places the RAM in Pipelined mode,
activating the rising-edge-triggered Data Output Register.
• LBO pin for Linear or Interleaved Burst mode
• Internal input resistors on mode pins allow floating mode pins
• Default to Interleaved Pipelined mode
• Byte Write (BW) and/or Global Write (GW) operation
• Common data inputs and data outputs
• Clock Control, registered, address, data, and control
• Internal self-timed write cycle
SCD Pipelined Reads
The GS82032A is an SCD (Single Cycle Deselect) pipelined
synchronous SRAM. DCD (Dual Cycle Deselect) versions are
also available. SCD SRAMs pipeline deselect commands one
stage less than read commands. SCD RAMs begin turning off
their outputs immediately after the deselect command has been
captured in the input registers.
• Automatic power-down for portable applications
• JEDEC standard 100-lead TQFP package
• Pb-Free 100-lead TQFP package available
Functional Description
Byte Write and Global Write
Applications
Byte write operation is performed by using Byte Write enable
(BW) input combined with one or more individual byte write
signals (Bx). In addition, Global Write (GW) is available for
writing all bytes at one time, regardless of the Byte Write
control inputs.
The GS82032A is a 2,097,152-bit high performance
synchronous SRAM with a 2-bit burst address counter.
Although of a type originally developed for Level 2 Cache
applications supporting high performance CPUs, the device
now finds application in synchronous SRAM applications,
ranging from DSP main store to networking chip set support.
Sleep Mode
Low power (Sleep mode) is attained through the assertion
(High) of the ZZ signal, or by stopping the clock (CK).
Memory data is retained during Sleep mode.
Controls
Addresses, data I/Os, chip enables (E1, E2, E3), address burst
control inputs (ADSP, ADSC, ADV), and write control inputs
(Bx, BW, GW) are synchronous and are controlled by a
positive-edge-triggered clock input (CK). Output enable (G)
and power down control (ZZ) are asynchronous inputs. Burst
cycles can be initiated with either ADSP or ADSC inputs. In
Burst mode, subsequent burst addresses are generated
internally and are controlled by ADV. The burst address
Core and Interface Voltages
The GS82032A operates on a 3.3 V power supply and all
inputs/outputs are 3.3 V- and 2.5 V-compatible. Separate
output power (V
) pins are used to decouple output noise
DDQ
from the internal circuit.
Parameter Synopsis
-180
-166
-150
-133 (-4) -100 (-5) -66 (-6)
Pipeline tCycle
5.5 ns
3.2 ns
155 mA
6 ns
3.5 ns
140 mA
6.6 ns
3.8 ns
130 mA
7.5 ns
4 ns
115 mA
10 ns
5 ns
90 mA
12.5 ns
6 ns
65 mA
3-1-1-1
tKQ
IDD
Flow
Through
2-1-1-1
tCycle
tKQ
IDD
9.1 ns
8 ns
100 mA
10 ns
8.5 ns
90 mA
10.5 ns
9 ns
85 mA
12 ns
10 ns
80 mA
15 ns
12 ns
65 mA
20 ns
18 ns
50 mA
Rev: 1.12 10/2004
1/22
© 2000, GSI Technology
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
GS82032AT-180/166/150/133/100/66/4/5/6
GS82032A 100-Pin TQFP Pinout
100 99 98 97 96 95 94 93 92 91 90 89 88 87 86 85 84 83 82 81
NC
DQB
DQB
V
NC
DQC
DQC
1
2
3
4
5
6
7
8
9
80
79
78
77
76
75
74
73
72
71
70
69
68
67
66
65
64
63
62
61
60
59
58
57
56
55
54
53
52
51
V
DDQ
DDQ
V
V
SS
SS
DQB
DQB
DQB
DQB
DQC
DQC
DQC
DQC
64K x 32
Top View
V
V
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
V
SS
DDQ
SS
V
DDQ
DQB
DQB
DQC
DQC
V
FT
DD
NC
SS
NC
V
V
ZZ
DD
V
SS
DQA
DQA
V
DQD
DQD
V
DDQ
DDQ
SS
V
V
SS
DQA
DQA
DQA
DQA
DQD
DQD
DQD
DQD
V
V
V
SS
DDQ
SS
V
DDQ
DQA
DQA
NC
DQD
DQD
NC
31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50
Rev: 1.12 10/2004
2/22
© 2000, GSI Technology
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
GS82032AT-180/166/150/133/100/66/4/5/6
TQFP Pin Description
Symbol
A0, A1
A
Type
Description
I
I
Address field LSBs and Address Counter preset Inputs
Address Inputs
DQA
DQB
DQC
DQD
I/O
Data Input and Output pins
NC
BW
No Connect
I
I
I
I
I
I
I
I
I
I
I
I
I
I
Byte Write—Writes all enabled bytes; active low
Byte Write Enable for DQA, DQB Data I/Os; active low
Byte Write Enable for DQC, DQD Data I/Os; active low
Clock Input Signal; active high
BA, BB
BC, BD
CK
GW
Global Write Enable—Writes all bytes; active low
Chip Enable; active low
E1, E3
E2
Chip Enable; active high
G
Output Enable; active low
ADV
ADSP, ADSC
ZZ
Burst address counter advance enable; active low
Address Strobe (Processor, Cache Controller); active low
Sleep Mode control; active high
FT
Flow Through or Pipeline mode; active low
Linear Burst Order mode; active low
Core power supply
LBO
V
DD
V
I
I
I/O and Core Ground
SS
V
Output driver power supply
DDQ
Rev: 1.12 10/2004
3/22
© 2000, GSI Technology
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
GS82032AT-180/166/150/133/100/66/4/5/6
GS82032A Block Diagram
RegisteQr
A0–An
D
A0
A1
A0
A1
D0
D1
Counter
Load
Q0
Q1
A
LBO
ADV
CK
Memory
Array
ADSC
ADSP
Q
D
Register
GW
BW
BA
D
Q
Register
32
32
D
Q
BB
BC
BD
4
Register
D
Q
Register
D
Q
Register
D
Q
Register
E1
E2
E3
D
Q
Register
D
Q
FT
G
Power Down
Control
DQx1–DQx8
ZZ
Rev: 1.12 10/2004
4/22
© 2000, GSI Technology
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
GS82032AT-180/166/150/133/100/66/4/5/6
Mode Pin Functions
Mode Name
Pin Name
State
L
Function
Linear Burst
Interleaved Burst
Flow Through
Pipeline
Burst Order Control
Output Register Control
Power Down Control
LBO
H or NC
L
FT
ZZ
H or NC
L or NC
H
Active
Standby, I = I
DD SB
Note:
There are pull-up devices on LBO and FT pins and a pull-down device on the ZZ pin, so those input pins can be unconnected and the chip will
operate in the default states as specified in the above table.
Burst Counter Sequences
Linear Burst Sequence
Interleaved Burst Sequence
A[1:0] A[1:0] A[1:0] A[1:0]
A[1:0] A[1:0] A[1:0] A[1:0]
1st address
2nd address
3rd address
00
01
10
11
01
10
11
00
10
11
00
01
11
00
01
10
1st address
2nd address
3rd address
00
01
10
11
01
00
11
10
10
11
00
01
11
10
01
00
4th address
4th address
Note:
The burst counter wraps to initial state on the 5th clock.
Note:
The burst counter wraps to initial state on the 5th clock.
Rev: 1.12 10/2004
5/22
© 2000, GSI Technology
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
GS82032AT-180/166/150/133/100/66/4/5/6
Byte Write Truth Table
Function
Read
GW
BW
H
L
B
A
B
B
B
C
B
D
Notes
1
H
H
H
H
H
H
H
L
X
H
L
X
H
H
L
X
H
H
H
L
X
H
H
H
H
L
Read
1
Write byte A
Write byte B
Write byte C
Write byte D
Write all bytes
Write all bytes
L
2, 3
L
H
H
H
L
2, 3
L
H
H
L
2, 3, 4
2, 3, 4
2, 3, 4
L
H
L
L
L
X
X
X
X
X
Notes:
1. All byte outputs are active in read cycles regardless of the state of Byte Write Enable inputs.
2. Byte Write Enable inputs BA, BB, BC and/or BD may be used in any combination with BW to write single or multiple bytes.
3. All byte I/Os remain High-Z during all write operations regardless of the state of Byte Write Enable inputs.
Rev: 1.12 10/2004
6/22
© 2000, GSI Technology
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
GS82032AT-180/166/150/133/100/66/4/5/6
Synchronous Truth Table
Operation
State
Address
Used
2
3
4
Diagram
E1
ADSP ADSC ADV
E
W
DQ
5
Key
Deselect Cycle, Power Down
Deselect Cycle, Power Down
Deselect Cycle, Power Down
Read Cycle, Begin Burst
None
None
X
X
H
L
X
X
L
L
X
L
X
X
X
X
X
X
L
X
X
X
X
F
T
F
F
T
T
F
F
T
T
High-Z
F
F
T
T
T
X
X
X
X
X
X
X
X
High-Z
None
X
L
L
H
L
High-Z
External
External
External
Next
R
X
L
Q
Q
D
Q
Q
D
D
Q
Q
D
D
Read Cycle, Begin Burst
Write Cycle, Begin Burst
Read Cycle, Continue Burst
Read Cycle, Continue Burst
Write Cycle, Continue Burst
Write Cycle, Continue Burst
Read Cycle, Suspend Burst
Read Cycle, Suspend Burst
Write Cycle, Suspend Burst
Write Cycle, Suspend Burst
R
L
L
X
H
X
H
X
H
X
H
H
H
H
X
H
X
H
X
H
X
W
L
CR
CR
CW
CW
H
H
H
H
H
H
H
H
Next
L
Next
L
Next
L
Current
Current
Current
Current
H
H
H
H
Notes:
1. X = Don’t Care, H = High, L = Low
2. E = T (True) if E2 = 1 and E3 = 0; E = F (False) if E2 = 0 or E3 = 1
3. W = T (True) and F (False) is defined in the Byte Write Truth Table preceding
4. G is an asynchronous input. G can be driven high at any time to disable active output drivers. G low can only enable active drivers (shown
as “Q” in the Truth Table above).
5. All input combinations shown above are tested and supported. Input combinations shown in gray boxes need not be used to accomplish
basic synchronous or synchronous burst operations and may be avoided for simplicity.
6. Tying ADSP high and ADSC low allows simple non-burst synchronous operations. See BOLD items above.
7. Tying ADSP high and ADV low while using ADSC to load new addresses allows simple burst operations. See ITALIC items above.
Rev: 1.12 10/2004
7/22
© 2000, GSI Technology
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
GS82032AT-180/166/150/133/100/66/4/5/6
Simplified State Diagram
X
Deselect
W
R
W
R
X
R
X
First Write
First Read
CW
CR
CR
W
R
R
X
Burst Write
X
Burst Read
CR
CW
CR
Notes:
1. The diagram shows only supported (tested) synchronous state transitions. The diagram presumes G is tied low.
2. The upper portion of the diagram assumes active use of only the Enable (E1, E2, E3) and Write (BA, BB, BC, BD, BW, and GW) control
inputs, and that ADSP is tied high and ADSC is tied low.
3. The upper and lower portions of the diagram together assume active use of only the Enable, Write, and ADSC control inputs, and
assumes ADSP is tied high and ADV is tied low.
Rev: 1.12 10/2004
8/22
© 2000, GSI Technology
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
GS82032AT-180/166/150/133/100/66/4/5/6
Simplified State Diagram with G
X
Deselect
W
R
W
R
X
W
R
X
First Write
First Read
CR
CW
CW
CR
W
R
R
W
X
Burst Write
X
Burst Read
CR
CW
CW
CR
Notes:
1. The diagram shows supported (tested) synchronous state transitions, plus supported transitions that depend upon the use of G.
2. Use of “Dummy Reads” (Read Cycles with G high) may be used to make the transition from Read cycles to Write cycles without passing
through a Deselect cycle. Dummy Read cycles increment the address counter just like normal Read cycles.
3. Transitions shown in gray assume G has been pulsed high long enough to turn the RAM’s drivers off and for incoming data to meet Data
Input Set Up Time.
Rev: 1.12 10/2004
9/22
© 2000, GSI Technology
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
GS82032AT-180/166/150/133/100/66/4/5/6
Absolute Maximum Ratings
(All voltages reference to V
)
SS
Symbol
Description
Value
Unit
V
V
Voltage on V Pins
–0.5 to 4.6
DD
DD
V
Voltage in V
Pins
–0.5 to V
DD
V
DDQ
DDQ
V
Voltage on Clock Input Pin
Voltage on I/O Pins
–0.5 to 6
–0.5 to V +0.5 (≤ 4.6 V max.)
V
CK
I/O
V
V
DDQ
V
Voltage on Other Input Pins
Input Current on Any Pin
Output Current on Any I/O Pin
Package Power Dissipation
Storage Temperature
–0.5 to V +0.5 (≤ 4.6 V max.)
V
IN
IN
DD
I
+/–20
+/–20
mA
mA
W
I
OUT
P
1.5
D
o
T
–55 to 125
–55 to 125
STG
BIAS
C
o
T
Temperature Under Bias
C
Note:
Permanent damage to the device may occur if the Absolute Maximum Ratings are exceeded. Operation should be restricted to Recommended
Operating Conditions. Exposure to conditions exceeding the Absolute Maximum Ratings, for an extended period of time, may affect reliability of
this component.
Recommended Operating Conditions
Parameter
Symbol
Min.
Typ.
Max.
Unit
Notes
V
Supply Voltage
3.135
2.375
1.7
3.3
2.5
—
3.6
V
V
1
1
2
2
3
3
DD
V
V
I/O Supply Voltage
Input High Voltage
Input Low Voltage
DDQ
DD
V
V +0.3
DD
V
IH
V
–0.3
0
—
0.8
V
IL
T
Ambient Temperature (Commercial Range Versions)
25
25
70
85
°C
°C
A
T
Ambient Temperature (Industrial Range Versions)
–40
A
Notes:
1. Unless otherwise noted, all performance specifications quoted are evaluated for worst case at both 2.75 V ≤ V
≤ 2.375 V (i.e., 2.5 V I/O)
DDQ
and 3.6 V ≤ V
≤ 3.135 V (i.e., 3.3 V I/O) and quoted at whichever condition is worst case.
DDQ
2. This device features input buffers compatible with both 3.3 V and 2.5 V I/O drivers.
3. Most speed grades and configurations of this device are offered in both Commercial and Industrial Temperature ranges. The part number of
Industrial Temperature Range versions end with the character “I”. Unless otherwise noted, all performance specifications quoted are evalu-
ated for worst case in the temperature range marked on the device.
4. Input Under/overshoot voltage must be –2 V > Vi < V +2 V with a pulse width not to exceed 20% tKC.
DD
Rev: 1.12 10/2004
10/22
© 2000, GSI Technology
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
GS82032AT-180/166/150/133/100/66/4/5/6
Undershoot Measurement and Timing
Overshoot Measurement and Timing
V
IH
20% tKC
V
+- 2.0 V
DD
V
SS
50%
50%
V
DD
V
– 2.0 V
SS
20% tKC
V
IL
Capacitance
(T = 25°C, f = 1 MHZ, V = 3.3 V)
A
DD
Parameter
Symbol
Test conditions
Typ.
Max.
Unit
C
V
= 3.3 V
= 0 V
Control Input Capacitance
Input Capacitance
3
4
6
4
5
7
pF
pF
pF
I
DD
C
V
IN
IN
C
V
= 0 V
OUT
Output Capacitance
OUT
Note:
This parameter is sample tested.
AC Test Conditions
Parameter
Conditions
Input high level
Input low level
2.3 V
0.2 V
Input slew rate
1 V/ns
1.25 V
1.25 V
Fig. 1& 2
Input reference level
Output reference level
Output load
Notes:
1. Include scope and jig capacitance.
2. Test conditions as specified with output loading as shown in Fig. 1 unless otherwise noted.
3. Output Load 2 for t , t , t and t
LZ HZ OLZ
OHZ
4. Device is deselected as defined by the Truth Table.
Output Load 2
2.5 V
Output Load 1
DQ
225Ω
225Ω
DQ
*
50Ω
VT = 1.25 V
30pF
*
5pF
* Distributed Test Jig Capacitance
Rev: 1.12 10/2004
11/22
© 2000, GSI Technology
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
GS82032AT-180/166/150/133/100/66/4/5/6
DC Electrical Characteristics
Parameter
Symbol
Test Conditions
Min
Max
Input Leakage Current
(except mode pins)
I
V = 0 to V
IN DD
–1 uA
1 uA
IL
V
≥ V ≥ V
–1 uA
–1 uA
1 uA
300 uA
DD
IN
IH
IH
I
ZZ Input Current
INZZ
0V ≤ V ≤ V
IN
V
≥ V ≥ V
–300 uA
–1 uA
1 uA
1 uA
DD
IN
IL
IL
I
Mode Pin Input Current
Output Leakage Current
INM
0V ≤ V ≤ V
IN
Output Disable,
V
I
–1 uA
1 uA
OL
= 0 to V
OUT
DD
V
I
I
= –4 mA, V
= –4 mA, V
= 2.375 V
Output High Voltage
Output High Voltage
Output Low Voltage
1.7 V
2.4 V
OH
OH
OH
DDQ
DDQ
V
= 3.135 V
OH
V
I
= 4 mA
OL
0.4 V
OL
Rev: 1.12 10/2004
12/22
© 2000, GSI Technology
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
GS82032AT-180/166/150/133/100/66/4/5/6
Rev: 1.12 10/2004
13/22
© 2000, GSI Technology
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
GS82032AT-180/166/150/133/100/66/4/5/6
AC Electrical Characteristics
-180
-166
-150
-133
-100
-66
Parameter
Symbol
Unit
Min Max Min Max Min Max Min Max Min Max Min Max
Clock Cycle Time
tKC
tKQ
5.5
—
—
3.2
—
—
—
8
6
—
3.5
—
—
—
8.5
—
—
—
—
6.6
—
—
3.8
—
—
—
9
7.5
—
—
4
10
—
1.5
1.5
15
—
3
—
5
12.5
—
—
6
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
Clock to Output Valid
—
1.5
1.5
10
—
3
Pipeline
Clock to Output Invalid
tKQX
1.5
1.5
9.1
—
1.5
1.5
10.5
—
1.5
1.5
12
—
—
—
—
10
—
—
—
—
4
—
—
—
12
—
—
—
—
5
1.5
1.5
20
—
—
—
—
18
—
—
—
—
6
1
Clock to Output in Low-Z
Clock Cycle Time
tLZ
tKC
tKQ
Clock to Output Valid
Flow
Through
Clock to Output Invalid
Clock to Output in Low-Z
Clock HIGH Time
tKQX
3
—
—
—
—
3.2
3.2
—
3
—
—
—
—
3
3
1
3
3
3
3
3
3
tLZ
tKH
tKL
1.3
1.5
1.5
—
1.3
1.5
1.3
1.5
1.3
1.5
1.3
1.5
1.5
—
0
1.3
1.5
1.5
—
Clock LOW Time
1
Clock to Output in High-Z
G to Output Valid
1.5 3.5 1.5 3.8 1.5
tHZ
tOE
—
0
3.5
—
—
0
3.8
—
—
0
4
5
6
1
G to output in Low-Z
0
—
—
0
—
tOLZ
1
G to output in High-Z
Setup time
—
1.5
0.5
5
3.2
—
—
—
—
1.5
0.5
5
3.5
—
—
—
—
1.5
0.5
5
3.8
—
—
—
—
1.5
0.5
5
4
—
1.5
0.5
5
5
—
1.5
0.5
5
6
ns
ns
ns
ns
tOHZ
tS
tH
—
—
—
—
—
—
—
—
—
Hold time
2
ZZ setup time
tZZS
2
ZZ hold time
ZZ recovery
1
—
—
1
—
—
1
—
—
1
—
—
1
—
—
1
—
—
ns
ns
tZZH
tZZR
20
20
20
20
20
20
Notes:
1. These parameters are sampled and are not 100% tested.
2. ZZ is an asynchronous signal. However, in order to be recognized on any given clock cycle, ZZ must meet the specified setup and hold
times as specified above.
Rev: 1.12 10/2004
14/22
© 2000, GSI Technology
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
GS82032AT-180/166/150/133/100/66/4/5/6
Pipeline Mode Timing
Begin
Read A Cont
Single Read
Cont
Deselect Write B Read C Read C+1 Read C+2 Read C+3 Cont
Deselect
Single Write
tKL
Burst Read
tKH
tKC
CK
ADSP
tS
tS
tH
tS
ADSC initiated read
ADSC
ADV
tH
tH
A
B
C
A0–An
GW
tS
tS
tH
tH
BW
tS
Ba–Bd
E1
tS
tS
tS
Deselected with E1
tH
E1 masks ADSP
tH
tH
E2 and E3 only sampled with ADSP and ADSC
E2
E3
G
tS
D(B)
tKQ
tKQX
tHZ
Q(C+2) Q(C+3)
tOE
tOHZ
Q(A)
tH
tLZ
Q(C)
Q(C+1)
DQa–DQd
Rev: 1.12 10/2004
15/22
© 2000, GSI Technology
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
GS82032AT-180/166/150/133/100/66/4/5/6
Flow Through Mode Timing
Begin
Read A Cont
tKH
Cont
Write B Read C Read C+1 Read C+2 Read C+3 Read C Cont
Deselect
tKL
tKC
CK
Fixed High
ADSP
tS
tH
tS
tH
ADSC initiated read
ADSC
ADV
A0–An
GW
tS
tH
tS
tH
A
B
C
tS
tH
tS
tH
BW
tS
tH
Ba–Bd
E1
tS
tS
Deselected with E1
tH
tH
E2 and E3 only sampled with ADSC
E2
tS
tH
E3
G
tH
tS
tKQ
tLZ
tHZ
tOE
tOHZ
D(B)
tKQX
Q(A)
Q(C)
Q(C+1)
Q(C+2)
Q(C+3)
Q(C)
DQa–DQd
Rev: 1.12 10/2004
16/22
© 2000, GSI Technology
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
GS82032AT-180/166/150/133/100/66/4/5/6
Sleep Mode Timing
tKH
tKC
tKL
CK
Setup
Hold
ADSP
ADSC
tZZR
tZZS
tZZH
ZZ
Application Tips
Single and Dual Cycle Deselect
SCD devices force the use of “dummy read cycles” (read cycles that are launched normally, but that are ended with the output
drivers inactive) in a fully synchronous environment. Dummy read cycles waste performance, but their use usually assures there
will be no bus contention in transitions from reads to writes or between banks of RAMs. DCD SRAMs do not waste bandwidth on
dummy cycles and are logically simpler to manage in a multiple bank application (wait states need not be inserted at bank address
boundary crossings), but greater care must be exercised to avoid excessive bus contention.
Rev: 1.12 10/2004
17/22
© 2000, GSI Technology
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
GS82032AT-180/166/150/133/100/66/4/5/6
GS82032A Output Driver Characteristics
60
40
Pull Down Drivers
20
VDDQ
I Out
0
VOut
VSS
-20
-40
-60
-80
Pull Up Drivers
-0.5
0
0.5
1
1.5
2
2.5
3
3.5
4
V Out (Pull Down)
VDDQ - V Out (Pull Up)
3.6V PD LD
3.3V PD LD
3.1V PD LD
3.1V PU LD
3.3V PU LD
3.6V PU LD
Rev: 1.12 10/2004
18/22
© 2000, GSI Technology
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
GS82032AT-180/166/150/133/100/66/4/5/6
TQFP Package Drawing (Package T)
θ
L
c
L1
Symbol
Description
Standoff
Min. Nom. Max
A1
A2
b
0.05
1.35
0.20
0.09
0.10
1.40
0.30
—
0.15
1.45
0.40
0.20
22.1
20.1
16.1
14.1
—
Body Thickness
Lead Width
c
Lead Thickness
D
Terminal Dimension 21.9
Package Body 19.9
Terminal Dimension 15.9
22.0
20.0
16.0
14.0
0.65
0.60
1.00
e
D1
E
b
E1
e
Package Body
Lead Pitch
13.9
—
L
Foot Length
Lead Length
Coplanarity
Lead Angle
0.45
—
0.75
—
L1
Y
A1
A2
E1
E
0.10
7°
θ
0°
—
Notes:
1. All dimensions are in millimeters (mm).
2. Package width and length do not include mold protrusion.
Rev: 1.12 10/2004
19/22
© 2000, GSI Technology
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
GS82032AT-180/166/150/133/100/66/4/5/6
Ordering Information for GSI Synchronous Burst RAMs
2
T
3
Speed
A
1
Org
Type
Package
Status
Part Number
(MHz/ns)
64K x 32
64K x 32
64K x 32
64K x 32
64K x 32
64K x 32
64K x 32
64K x 32
64K x 32
64K x 32
64K x 32
64K x 32
64K x 32
64K x 32
64K x 32
64K x 32
64K x 32
64K x 32
GS82032AT-180
GS82032AT-166
GS82032AT-150
GS82032AT-133
GS82032AT-100
GS82032AT-66
GS82032AT-4
Pipeline/Flow Through
Pipeline/Flow Through
Pipeline/Flow Through
Pipeline/Flow Through
Pipeline/Flow Through
Pipeline/Flow Through
Pipeline/Flow Through
Pipeline/Flow Through
Pipeline/Flow Through
Pipeline/Flow Through
Pipeline/Flow Through
Pipeline/Flow Through
Pipeline/Flow Through
Pipeline/Flow Through
Pipeline/Flow Through
Pipeline/Flow Through
Pipeline/Flow Through
Pipeline/Flow Through
Pipeline/Flow Through
Pipeline/Flow Through
Pipeline/Flow Through
Pipeline/Flow Through
Pipeline/Flow Through
Pipeline/Flow Through
Pipeline/Flow Through
Pipeline/Flow Through
Pipeline/Flow Through
Pipeline/Flow Through
Pipeline/Flow Through
Pipeline/Flow Through
TQFP
TQFP
180/8
166/8.5
150/9
C
C
C
C
C
C
C
C
C
I
TQFP
TQFP
133/10
100/12
66/18
TQFP
TQFP
TQFP
133/10
100/12
66/18
GS82032AT-5
TQFP
GS82032AT-6
TQFP
GS82032AT-180I
GS82032AT-166I
GS82032AT-150I
GS82032AT-133I
GS82032AT-100I
GS82032AT-66I
GS82032AT-4I
GS82032AT-5I
GS82032AT-6I
TQFP
180/8
TQFP
166/8.5
150/9
I
TQFP
I
TQFP
133/10
100/12
66/18
I
TQFP
I
TQFP
I
TQFP
133/10
100/12
66/18
I
TQFP
I
TQFP
I
64K x 32 GS82032AGT-180
64K x 32 GS82032AGT-166
64K x 32 GS82032AGT-150
64K x 32 GS82032AGT-133
64K x 32 GS82032AGT-100
64K x 32 GS82032AGT-66
Pb-free TQFP
Pb-free TQFP
Pb-free TQFP
Pb-free TQFP
Pb-free TQFP
Pb-free TQFP
Pb-free TQFP
Pb-free TQFP
Pb-free TQFP
Pb-free TQFP
Pb-free TQFP
Pb-free TQFP
180/8
C
C
C
C
C
C
C
C
C
I
166/8.5
150/9
133/10
100/12
66/18
64K x 32
64K x 32
64K x 32
GS82032AGT-4
GS82032AGT-5
GS82032AGT-6
133/10
100/12
66/18
64K x 32 GS82032AGT-180I
64K x 32 GS82032AGT-166I
180/8
166/8.5
150/9
I
64K x 32 GS82032AGT-150I
I
Notes:
1. Customers requiring delivery in Tape and Reel should add the character “T” to the end of the part number. Example: GS82032AT-150IT.
2. The speed column indicates the cycle frequency (MHz) of the device in Pipelined mode and the latency (ns) in Flow Through mode. Each
device is Pipeline/Flow Through mode-selectable by the user.
3. TA = C = Commercial Temperature Range. TA = I = Industrial Temperature Range.
4. GSI offers other versions this type of device in many different configurations and with a variety of different features, only some of which are
covered in this data sheet. See the GSI Technology web site (www.gsitechnology.com) for a complete listing of current offerings.
Rev: 1.12 10/2004
20/22
© 2000, GSI Technology
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
GS82032AT-180/166/150/133/100/66/4/5/6
Ordering Information for GSI Synchronous Burst RAMs
2
T
3
Speed
A
1
Org
Type
Package
Status
Part Number
(MHz/ns)
64K x 32 GS82032AGT-133I
64K x 32 GS82032AGT-100I
64K x 32 GS82032AGT-66I
Pipeline/Flow Through
Pipeline/Flow Through
Pipeline/Flow Through
Pipeline/Flow Through
Pipeline/Flow Through
Pipeline/Flow Through
Pb-free TQFP
Pb-free TQFP
Pb-free TQFP
Pb-free TQFP
Pb-free TQFP
Pb-free TQFP
133/10
100/12
66/18
I
I
I
I
I
I
64K x 32
64K x 32
GS82032AGT-4I
GS82032AGT-5I
GS82032AGT-6I
133/10
100/12
66/18
64K x 32
Notes:
1. Customers requiring delivery in Tape and Reel should add the character “T” to the end of the part number. Example: GS82032AT-150IT.
2. The speed column indicates the cycle frequency (MHz) of the device in Pipelined mode and the latency (ns) in Flow Through mode. Each
device is Pipeline/Flow Through mode-selectable by the user.
3. TA = C = Commercial Temperature Range. TA = I = Industrial Temperature Range.
4. GSI offers other versions this type of device in many different configurations and with a variety of different features, only some of which are
covered in this data sheet. See the GSI Technology web site (www.gsitechnology.com) for a complete listing of current offerings.
Rev: 1.12 10/2004
21/22
© 2000, GSI Technology
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
GS82032AT-180/166/150/133/100/66/4/5/6
Revision History
Types of Changes
Format or Content
DS/DateRev. Code: Old;
Revisions
New
• First Release of A version. Added “A” Version to 82032T/Q,
820E32TQ, and 820H32TQ
GS82032 Rev 1.03 2/
2000D;GS820321.04 3/
2000E
Content
Content
• Updated ADSC in timing diagrams on pages 16 and 18
GS820321.04 3/2000E;
GS82032A_r1_05
• Added 200 MHz, 180 MHz, and 166 MHz speed bins (all refer-
ences updated)
• Deleted 150 MHz, 138 MHz, and 66 MHz speed bins (all refer-
ences deleted)
82032A_r1_05;
82032A_r1_06
Content
Content
• Deleted BGA reference in “Flow Through/Pipeline Reads” on
page 1
• Updated entire datasheet with new standards
• Updated table on page 1
• Updated Operating Currents table on page 12
• Updated Electrical Characteristics table on page 13
• Updated format to comply with Technical Publications stan-
dards
82032A_r1_06;
82032A_r1_07
• Added the following part numbers to the Ordering Information
table on page 22:
–GS82032AT-4
–GS82032AT-6
–GS82032AT-4I
–GS82032AT-6I
–GS82032AQ-4
–GS82032AQ-6
–GS82032AQ-4I
–GS82032AQ-6I
82032A_r1_07;
82032A_r1_08
Content
• Removed all references to 200 MHz parts (no longer active)
82032A_r1_08;
82032A_r1_09
Content
Content
Content
Content
• Complete rewrite of datasheet in order to reflect parts
available
82032A_r1_09;
82032A_r1_10
• Reactiviated 180 MHz speed bin
• Updated format
82032A_r1_10;
82032A_r1_11
• Added Pb-free information for TQFP
82032A_r1_11;
82032A_r1_12
Rev: 1.12 10/2004
22/22
© 2000, GSI Technology
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
相关型号:
©2020 ICPDF网 联系我们和版权申明