GRF2073-W_技术文档

Released

GRF2073-W

Ultra-Low Noise Amplifier

Tuning Range: 2.0 to 6.0 GHz

Product Description

GRF2073-W is a linear, ultra-low noise amplifier designed

for automotive satellite radio multi-stage LNAs, signal

booster and 5G applications.

With its ultra-low noise and high gain characteristics, this

amplifier is an ideal first-stage LNA solution for high-

performance, multi-stage SDARS LNA designs. With superi-

or performance, it offers a drop-in alternative to legacy

SDARS LNA solutions.

Features

Reference: 5V/70 mA/2332.5 MHz

This device is part of a growing family of automotive-

qualified ultra-low noise amplifiers targeted for stage 1

SDARS LNA and compensator applications to include:

• Gain: 20.5 dB

• NF: 0.40 dB

GRF2071-W: 0.7 to 2.7 GHz

GRF2072-W: 1.5 to 3.8 GHz

GRF2073-W: 2.0 to 6.0 GHz

• OP1dB: 19.8 dBm

• OIP3: 35.0 dBm

Each of the above devices offers ultra–low NF with differ-

ent gain levels for optimal performance within a variety of

radio architectures.

• Tested to AEC-Q100 Grade 2

Consult with the GRF applications engineering team for

application notes, custom tuning/evaluation board data

and de-embedded s-parameters with noise data.

• Flexible Bias Voltage and Current

• Process: GaAs pHEMT

Applications

• SDARS LNA

• Cellular Boosters (Compensator)

• 5G LNA

Please contact Guerrilla RF at (+1) 336-510-7840 or sales@guerrilla-rf.com

Revision Date: 09/09/19

Product and product information subject to change without notice

1

Released

GRF2073-W

Ultra-Low Noise Amplifier

Tuning Range: 2.0 to 6.0 GHz

Absolute Ratings:

Parameter

Symbol

Min.

0

Max.

7.0

Unit

V

Supply Voltage

VDD

RF Input Power CW: (Load VSWR < 2:1; V_D: 5.0

volts)

P_{IN MAX}

T_AMB

23

dBm

°C

Operating Temperature (Package Heat Sink)

-40

105

170

600

Maximum Channel Temperature

(MTTF > 10^6 Hours)

TMAX

°C

Maximum Dissipated Power

Electrostatic Discharge:

P_{DISS MAX}

mW

Charged Device Model:

Human Body Model:

Storage:

CDM

HBM

1500

500

V

Storage Temperature

T_STG

-65

150

1

°C

--

Moisture Sensitivity Level

MSL

Cauꢀon! ESD Sensiꢀve Device

Exceeding Absolute Maximum Raꢀng condiꢀons may cause permanent damage to the device.

Note: For manufacturing informaꢀon, see the Guerrilla-RF.com website for the following docu-

ment located on the GRF2073-W landing page: Manufacturing Note—MN-001 Product Tape and

Reel, Solderability and Package Outline Speciﬁcaꢀon.

Link to manufacturing note:

Please contact Guerrilla RF at (+1) 336-510-7840 or sales@guerrilla-rf.com

Revision Date: 09/09/19

Product and product information subject to change without notice

2

Released

GRF2073-W

Ultra-Low Noise Amplifier

Tuning Range: 2.0 to 6.0 GHz

Pin Out (Top View)

Pin Assignments:

Name

VENABLE

Description

Enable Voltage Input

Note

VENABLE and series resistor set IDDQ. VENABLE < =0.2 volts disables device. On

1

-die pull-down resistor will turn the part off if this node is allowed to float.

RF Input

External match must provide DC block

RF_In

NC/GND

RF_Out/VDD

NC/GND

GND

2

3

4

5

6

7

8

No Connect or Ground

RF Output

No internal connection to die

Provide device VDD via external bias inductor

No internal connection to die

No Connect or Ground

Ground

Provides DC and RF ground for LNA, as well as thermal heat sink. Recom-

mend multiple 8 mil vias beneath the package for optimal RF and thermal

performance. Refer to evaluation board top layer graphic on schematic

page.

PKG

BASE

Please contact Guerrilla RF at (+1) 336-510-7840 or sales@guerrilla-rf.com

Revision Date: 09/09/19

Product and product information subject to change without notice

3

Released

GRF2073-W

Ultra-Low Noise Amplifier

Tuning Range: 2.0 to 6.0 GHz

Nominal Operating Parameters :

Specification

Typ.

Parameter

Symbol

Unit

Condition

Min.

Max.

VDD = 5.0 V, T_A= 25°C

3.4 to 3.8 GHz Tune

Gain Mode (Venable high)

Test Frequency

F_TEST

S21

NF

3.6

GHz

dB

Gain

17.5

18.5

0.65

35.0

Evaluation Board Noise Figure

Output 3rd Order Intercept Point

0.85

dB

Evaluation Board SMA to SMA

OIP3

dBm

+3 dBm P_OUTper tone at 2 MHz

Spacing (3599 and 3601 MHz)

Output 1dB Compression Point

Switching Rise Time

OP1dB

T_RISE

16.5

18.0

300

70

dBm

ns

Switching Fall Time

T_FALL

ns

Supply Current

IDD

mA

Enable Current

IENABLE

3.5

Thermal Data

Thermal Resistance (measured via IR scan)

60

ᵒC/W On standard evaluation board

jc

Channel Temperature @ +85 C Reference

(Package Heat Sink)

TCHANNEL

106

(See note)

ᵒC

VDD: 5.0 V; IDDQ: 70 mA; No RF;

PDISS: 350 mW

Note: MTTF >10^6 hours for TCHANNEL < =170 degrees C.

Specification

Typ.

Parameter

Symbol

Unit

Condition

Min.

Max.

VDD = 5.0 V, T_A= 25°C;VENABLE: High

2320 to 2345 MHz SDARS Tune

Gain Mode

Test Frequency

F_TEST

S21

NF

2332.5

20.5

MHz

dB

Evaluation Board Gain

19.5

Noise Figure (de-embedded)

Output 3rd Order Intercept Point

0.40

0.60

dB

OIP3

35.0

dBm

4.0 dBm P_OUTper tone at 2 MHz

Spacing (2331.5 and 2333.5 MHz)

Output 1dB Compression Point

Switching Rise Time

OP1dB

T_RISE

18.3

19.8

300

dBm

ns

Switching Fall Time

T_FALL

ns

Supply Current

Enable Current

IDD

70

mA

IENABLE

3.5

Please contact Guerrilla RF at (+1) 336-510-7840 or sales@guerrilla-rf.com

Revision Date: 09/09/19

Product and product information subject to change without notice

4

Released

GRF2073-W

Ultra-Low Noise Amplifier

Tuning Range: 2.0 to 6.0 GHz

GRF2073-W Evaluation Board Data over Temperature: (3.4 to 3.8 GHz match)

Please contact Guerrilla RF at (+1) 336-510-7840 or sales@guerrilla-rf.com

Revision Date: 09/09/19

Product and product information subject to change without notice

5

Released

GRF2073-W

Ultra-Low Noise Amplifier

Tuning Range: 2.0 to 6.0 GHz

GRF2073-W Evaluation Board Data over Temperature: (3.4 to 3.8 GHz Match)

Please contact Guerrilla RF at (+1) 336-510-7840 or sales@guerrilla-rf.com

Revision Date: 09/09/19

Product and product information subject to change without notice

6

Released

GRF2073-W

Ultra-Low Noise Amplifier

Tuning Range: 2.0 to 6.0 GHz

GRF2073-W Evaluation Board Data over Temperature: (SDARS Match; NF De-embedded)

Please contact Guerrilla RF at (+1) 336-510-7840 or sales@guerrilla-rf.com

Revision Date: 09/09/19

Product and product information subject to change without notice

7

Released

GRF2073-W

Ultra-Low Noise Amplifier

Tuning Range: 2.0 to 6.0 GHz

GRF2073-W Evaluation Board Data over Temperature: (SDARS Match)

Please contact Guerrilla RF at (+1) 336-510-7840 or sales@guerrilla-rf.com

Revision Date: 09/09/19

Product and product information subject to change without notice

8

Released

GRF2073-W

Ultra-Low Noise Amplifier

Tuning Range: 2.0 to 6.0 GHz

GRF2073-W Evaluation Board Data over Temperature:

Please contact Guerrilla RF at (+1) 336-510-7840 or sales@guerrilla-rf.com

Revision Date: 09/09/19

Product and product information subject to change without notice

9

Released

GRF2073-W

Ultra-Low Noise Amplifier

Tuning Range: 2.0 to 6.0 GHz

GRF2073-W Gain Mode S-Pars: (3.4 to 3.8 GHz Match)

Note: Mu factor >= 1.0 implies unconditional stability.

Please contact Guerrilla RF at (+1) 336-510-7840 or sales@guerrilla-rf.com

Revision Date: 09/09/19

Product and product information subject to change without notice

10

Released

GRF2073-W

Ultra-Low Noise Amplifier

Tuning Range: 2.0 to 6.0 GHz

GRF2073-W Gain Mode S-Pars: (SDARS Match)

Please contact Guerrilla RF at (+1) 336-510-7840 or sales@guerrilla-rf.com

Revision Date: 09/09/19

Product and product information subject to change without notice

11

Released

GRF2073-W

Ultra-Low Noise Amplifier

Tuning Range: 2.0 to 6.0 GHz

GRF2073-W Evaluation Board Mu/Mu Prime Stability Factors: (SDARS Match)

Note: Mu >= 1.0 implies unconditional stability.

Note: Mu Prime >= 1.0 implies unconditional stability.

Please contact Guerrilla RF at (+1) 336-510-7840 or sales@guerrilla-rf.com

Revision Date: 09/09/19

Product and product information subject to change without notice

12

Released

GRF2073-W

Ultra-Low Noise Amplifier

Tuning Range: 2.0 to 6.0 GHz

GRF2073-W Application Schematic

GRF2073-W EVB Assembly Drawing

Please contact Guerrilla RF at (+1) 336-510-7840 or sales@guerrilla-rf.com

Revision Date: 09/09/19

Product and product information subject to change without notice

13

Released

GRF2073-W

Ultra-Low Noise Amplifier

Tuning Range: 2.0 to 6.0 GHz

GRF2073-W Evaluation Board BOM: (3.4 to 3.8 GHz Tune)

Component

Type

Manufacturer

Family

Value

Package Size

Subsꢀtuꢀon

M1

M3

Capacitor

Resistor

Murata

Various

Murata

GJM

5%

1.2 pF

Sets Iddq

0 Ohm

1.8 nH

0.1 uF

0402

Ok (high Q)

ok

M4

Resistor

—

M8

Inductor

Capacitor

LQP/LQG

GRM

GJM

M9

M10

M11

100 pF

5.1 pF

Evaluaꢀon Board

DFN8_2x2_RevA

—

GRF2073-W Standard Evaluation Board BOM: (SDARS Tune)

Component

Type

Manufacturer

Family

Value

Package Size

Subsꢀtuꢀon

Jumper

(Not Required)

M1

—

0 ohms

0402

ok

M3

Resistor

Capacitor

Various

Murata

—

5%

GJM

LQG

GRM

—

Sets Iddq

20 pF

0402

—

ok

M4

ok (high Q)

M8

M9

Inductor

2.0 nH

0.1 uF

100 pF

2.0 pF

—

ok

—

Capacitor

M10

Capacitor

M11

Capacitor

Evaluaꢀon Board

DFN8_2x2_RevA

Note: The match represented by the above SDARS BOM is designed to achieve opꢀmal noise ﬁgure over

2320 to 2345 MHz. The high gain of GRF2073 allows for NF to be emphasized over input return loss for

what is intended as a ﬁrst-stage LNA SDARS applicaꢀon. This matching approach has been found to yield

the best overall compliance to the SDARS speciﬁcaꢀon which typically requires two SAW ﬁlters along with

two high-gain ampliﬁer stages.

Please contact Guerrilla RF at (+1) 336-510-7840 or sales@guerrilla-rf.com

Revision Date: 09/09/19

Product and product information subject to change without notice

14

Released

GRF2073-W

Ultra-Low Noise Amplifier

Tuning Range: 2.0 to 6.0 GHz

GRF2073 Bias Resistor Selection Curves:

Please contact Guerrilla RF at (+1) 336-510-7840 or sales@guerrilla-rf.com

Revision Date: 09/09/19

Product and product information subject to change without notice

15

Released

GRF2073-W

Ultra-Low Noise Amplifier

Tuning Range: 2.0 to 6.0 GHz

2.0 mm DFN-8 Suggested PCB Footprint (Top View)

2.0 mm DFN-8 Package Dimensions

Please contact Guerrilla RF at (+1) 336-510-7840 or sales@guerrilla-rf.com

Revision Date: 09/09/19

Product and product information subject to change without notice

16

Released

GRF2073-W

Ultra-Low Noise Amplifier

Tuning Range: 2.0 to 6.0 GHz

Tape and Reel Information:

Guerrilla RF’s Tape and Reel specification complies with the Electronics Industries Association (EIA)

standards for ‘Embossed Carrier Tape of Surface Mount Components for Automatic Handling”. Reference

EIA-481. See the table on the following page for Tape and Reel specifications along with units per reel.

Devices are loaded with pins down into the carrier pocket with protective cover tape, wound into a plastic

reel. Each reel will be packaged in a cardboard box. There will be product labels on the reel, the protec-

tive ESD bag and the outside surface of the box.

Tape and Reel Packaging with Reel Diameter Noted (D)

Carrier Tape Width (W), Pitch (P), Feed Direction and Pin 1 Quadrant Information

Please contact Guerrilla RF at (+1) 336-510-7840 or sales@guerrilla-rf.com

Revision Date: 09/09/19

Product and product information subject to change without notice

17

Released

GRF2073-W

Ultra-Low Noise Amplifier

Tuning Range: 2.0 to 6.0 GHz

Tape and Reel Specification and Device Package Information Table

Package

Carrier Tape

Reel

Type

Dimensions

(mm)

Leads

Weight

(mg)

Width (W) Pocket Pitch (P) Pin 1 Quad- Diameter (D)

Units per

Reel

rant

(mm)

(inches)

QFN 2.0 x 2.0 x 0.50

QFN 3.0 x 3.0 x 0.85

DFN 1.5 x 1.5 x 0.45

DFN 2.0 x 2.0 x 0.75

LFM 3.5 x 3.5 x 0.75

12

16

6

7

24

4

8

4

Q1

7

2500

1500

2500

1500

12

8

4

8

Q1

Q2

7

8

12

TBD

8

See

12

note

LFM 4.0 x 4.0 x 0.75

See

TBD

12

8

Q2

7

1500

note

Note: Lead count may vary. Reference applicable product data sheet

Please contact Guerrilla RF at (+1) 336-510-7840 or sales@guerrilla-rf.com

Revision Date: 09/09/19

Product and product information subject to change without notice

18

Released

GRF2073-W

Ultra-Low Noise Amplifier

Tuning Range: 2.0 to 6.0 GHz

Data Sheet Release Status:

Advance

Notes

S-parameter and NF data based on EM simulations for the fully packaged device

using foundry supplied transistor s-parameters. Linearity estimates based on de-

vice size, bias condition and experience with related devices.

All data based on evaluation board measurements in the Guerrilla RF Applications

Lab.

Preliminary

Released

All data based on device qualification data. Typically, this data is nearly identical to

the data found in the preliminary version. Max and min values for key RF parame-

ters are included.

Informaꢀon in this datasheet is speciﬁc to the Guerrilla RF, Inc. (“Guerrilla RF”) product idenꢀﬁed.

This datasheet, including the informaꢀon contained in it, is provided by Guerrilla RF as a service to its customers and may be used for informaꢀonal purposes

only by the customer. Guerrilla RF assumes no responsibility for errors or omissions on this datasheet or the informaꢀon contained herein. Informaꢀon provided

is believed to be accurate and reliable, however, no responsibility is assumed by Guerrilla RF for its use, nor for any infringement of patents, or other rights of

third parꢀes, resulꢀng from its use. Guerrilla RF assumes no liability for any datasheet, datasheet informaꢀon, materials, products, product informaꢀon, or other

informaꢀon provided hereunder, including the sale, distribuꢀon, reproducꢀon or use of Guerrilla RF products, informaꢀon or materials.

No license, whether express, implied, by estoppel, by implicaꢀon or otherwise is granted by this datasheet for any intellectual property of Guerrilla RF, or any

third party, including without limitaꢀon, patents, patent rights, copyrights, trademarks and trade secrets. All rights are reserved by Guerrilla RF.

All informaꢀon herein, products, product informaꢀon, datasheets, and datasheet informaꢀon are subject to change and availability without noꢀce. Guerrilla RF

reserves the right to change component circuitry, recommended applicaꢀon circuitry and speciﬁcaꢀons at any ꢀme without prior noꢀce. Guerrilla RF may further

change its datasheet, product informaꢀon, documentaꢀon, products, services, speciﬁcaꢀons or product descripꢀons at any ꢀme, without noꢀce. Guerrilla RF

makes no commitment to update any materials or informaꢀon and shall have no responsibility whatsoever for conﬂicts, incompaꢀbiliꢀes, or other diﬃculꢀes

arising from any future changes.

GUERRILLA RF INFORMATION, PRODUCTS, PRODUCT INFORMATION, DATASHEETS AND DATASHEET INFORMATION ARE PROVIDED “AS IS” AND WITHOUT WAR-

RANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY,

PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. GUER-

RILLA RF DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATE-

RIALS. GUERRILLA RF SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSE-

QUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFOR-

MATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Customers are solely responsible for their use of Guerrilla RF products in the Customer’s products and applicaꢀons or in ways which deviate from Guerrilla RF’s

published speciﬁcaꢀons, either intenꢀonally or as a result of design defects, errors, or operaꢀon of products outside of published parameters or design speciﬁca-

ꢀons. Customers should include design and operaꢀng safeguards to minimize these and other risks. Guerrilla RF assumes no liability or responsibility for applica-

ꢀons assistance, customer product design, or damage to any equipment resulꢀng from the use of Guerrilla RF products outside of stated published speciﬁcaꢀons

or parameters.

Please contact Guerrilla RF at (+1) 336-510-7840 or sales@guerrilla-rf.com

Revision Date: 09/09/19

Product and product information subject to change without notice

19


型号：	GRF2073-W
厂家：	Guerrilla RF
描述：	Ultra-Low Noise Amplifier Tuning Range: 2.0 to 6.0 GHz
文件：	总19页 (文件大小：1263K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

GRF2073-W [GUERRILLA]

相关型号：

GRF2074

GRF2077

GRF2080

GRF2081

GRF2082

GRF2093

GRF2093-W

GRF2100

GRF2101

GRF2105

GRF2106

GRF2130