GRF2501-W [GUERRILLA]
High Gain, Ultra-LNA 802.11ac: 4.9â6.0 GHz;型号: | GRF2501-W |
厂家: | Guerrilla RF |
描述: | High Gain, Ultra-LNA 802.11ac: 4.9â6.0 GHz |
文件: | 总17页 (文件大小:1125K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
GRF2501-W
Released
High Gain, Ultra-LNA
802.11ac: 4.9—6.0 GHz
Product Description
GRF2501-W is an ultra-low noise amplifier (LNA) designed
for IEEE 802.11a/n/ac/p applications in the 5 GHz band.
The LNA is operated from a single positive supply of 2.7 to
5.0 V with a typical bias condition of 3.3 V and 18 mA and
is internally matched to 50 Ω at the input and output
ports.
Features
Consult with the GRF applications engineering team for
custom tuning/evaluation board data and device s-
parameters.
Reference: 3.3V/18mA/5.5 GHz
• Evaluation Board NF: 1.0 dB
• Gain: 17.0 dB
• OP1dB: 9.0 dBm
• Tested to AEC-Q100 Grade 2
• 100% Device Reflow at Assembly
• 100% Optical Die Inspection
• Flexible Bias Voltage and Current
• Process: GaAs pHEMT
Applications
• WiFi Access Points
• Mobile WiFi Devices
• 802.11p Vehicle Communications
1.5 x 1.5 mm DFN-6
• Microwave Backhaul
Guerrilla RF Proprietary Information. Guerrilla RFTM and the composite logo of Guerrilla RFTM are trademarks of Guerrilla RF, Inc. ©2014 Guerrilla RF, Inc. All rights reserved.
Please contact Guerrilla RF at (+1) 336-510-7840 or sales@guerrilla-rf.com
Revision Date: 09/09/19
1
GRF2501-W
Released
High Gain, Ultra-LNA
802.11ac: 4.9—6.0 GHz
Absolute Ratings:
Parameter
Symbol
Min.
0
Max.
6.0
Unit
V
Supply Voltage
VDD
RF Input Power: (Load VSWR < 2:1; VD: 5.0 volts)
Operating Temperature (Package Heat Sink)
PIN MAX
TAMB
15
dBm
°C
-40
105
170
Maximum Channel Temperature
(MTTF > 10^6 Hours)
TMAX
°C
Maximum Dissipated Power
Electrostatic Discharge:
Charged Device Model:
Human Body Model:
Storage:
PDISS MAX
200
mW
CDM
HBM
1500
250
V
V
Storage Temperature
TSTG
-65
150
1
°C
--
Moisture Sensitivity Level
MSL
Cauꢀon! ESD Sensiꢀve Device
Exceeding Absolute Maximum Raꢀng condiꢀons may cause permanent damage to the device.
Note: For manufacturing informaꢀon, see the Guerrilla-RF.com website for the following docu-
ment located on the GRF2501-W landing page: Manufacturing Note—MN-001 Product Tape and
Reel, Solderability and Package Outline Specificaꢀon.
Link to manufacturing note
Guerrilla RF Proprietary Information. Guerrilla RFTM and the composite logo of Guerrilla RFTM are trademarks of Guerrilla RF, Inc. ©2014 Guerrilla RF, Inc. All rights reserved.
Please contact Guerrilla RF at (+1) 336-510-7840 or sales@guerrilla-rf.com
Revision Date: 09/09/19
2
GRF2501-W
Released
High Gain, Ultra-LNA
802.11ac: 4.9—6.0 GHz
Pin Out (Top View)
Pin Assignments:
Pin
Name
Description
LNA Enable Input
Note
VENABLE and series resistor set IDDQ. VENABLE < =0.2 volts disables device. On-
VENABLE
1
die pull-down resistor will turn the part off if this node is allowed to float.
No Connect or Ground
LNA RF input
No internal connection to die
NC
2
3
4
5
6
RF_In
RF_Out
NC
Internally matched to 50 Ω. These ports may be DC connected to ground
externally but no DC > 0.2 volts should be applied to these ports.
LNA RF output
No Connect or Ground
No internal connection to die
Supply Voltage for the LNA Requires bypass capacitance as close as possible to pin on PCB
VDD
Ground
Provides DC and RF ground for LNA, as well as thermal heat sink. Recom-
mend multiple 8 mil vias beneath the package for optimal RF and thermal
performance. Refer to evaluation board top layer graphic on schematic
page.
GND
PKG BASE
VENABLE Truth Table:
VDD
High
High
VENABLE
Mode
>=1.8 V
LNA On
<0.1 V
LNA Off
Guerrilla RF Proprietary Information. Guerrilla RFTM and the composite logo of Guerrilla RFTM are trademarks of Guerrilla RF, Inc. ©2014 Guerrilla RF, Inc. All rights reserved.
Please contact Guerrilla RF at (+1) 336-510-7840 or sales@guerrilla-rf.com
Revision Date: 09/09/19
3
GRF2501-W
Released
High Gain, Ultra-LNA
802.11ac: 4.9—6.0 GHz
Nominal Operating Parameters:
Specification
Parameter
Symbol
Unit
Condition
Min.
Typ.
Max.
VDD = 3.3 V, VENABLE = 3.3 V, TA = 25°C
High Gain Mode
Test Frequency
FTEST
S21
5500
17.0
1.0
MHz
dB
Gain
15.0
19.0
1.2
Evaluation Board Noise Figure
Input Power at 1% EVM
Output 1dB Compression
Supply Current (Quiescent)
Enable Current
NF
dB
EVM
OP1dB
IDD
-19.0
9.0
dBm
dBm
mA
802.11ac modulation
6.0
12.0
18.0
1.5
28.0
3.0
IENABLE
mA
VDD = 3.3 V, VENABLE = 0.0V
Disabled Mode
Supply Current (Leakage)
Thermal Data
IDD
200
150
500
A
Thermal Resistance (Infra-Red Scan)
ᵒC/W
ᵒC
jc
Channel Temperature @ +85 C refer-
ence (Package heat sink)
TCHANNEL
99
(See note)
VDD: 3.3V; IDDQ: 28 mA; No RF
PDISS: 92 mW
Note: MTTF >10^6 hours for TCHANNEL < =170 degrees C.
Guerrilla RF Proprietary Information. Guerrilla RFTM and the composite logo of Guerrilla RFTM are trademarks of Guerrilla RF, Inc. ©2014 Guerrilla RF, Inc. All rights reserved.
Please contact Guerrilla RF at (+1) 336-510-7840 or sales@guerrilla-rf.com
Revision Date: 09/09/19
4
GRF2501-W
Released
High Gain, Ultra-LNA
802.11ac: 4.9—6.0 GHz
GRF2501-W Evaluation Board Measured Data: 3.3V/18mA
Guerrilla RF Proprietary Information. Guerrilla RFTM and the composite logo of Guerrilla RFTM are trademarks of Guerrilla RF, Inc. ©2014 Guerrilla RF, Inc. All rights reserved.
Please contact Guerrilla RF at (+1) 336-510-7840 or sales@guerrilla-rf.com
Revision Date: 09/09/19
5
GRF2501-W
Released
High Gain, Ultra-LNA
802.11ac: 4.9—6.0 GHz
GRF2501-W Evaluation Board Measured Data: 3.3V/18mA
Guerrilla RF Proprietary Information. Guerrilla RFTM and the composite logo of Guerrilla RFTM are trademarks of Guerrilla RF, Inc. ©2014 Guerrilla RF, Inc. All rights reserved.
Please contact Guerrilla RF at (+1) 336-510-7840 or sales@guerrilla-rf.com
Revision Date: 09/09/19
6
GRF2501-W
Released
High Gain, Ultra-LNA
802.11ac: 4.9—6.0 GHz
GRF2501-W Evaluation Board Measured Data: 3.3V/18 mA
Guerrilla RF Proprietary Information. Guerrilla RFTM and the composite logo of Guerrilla RFTM are trademarks of Guerrilla RF, Inc. ©2014 Guerrilla RF, Inc. All rights reserved.
Please contact Guerrilla RF at (+1) 336-510-7840 or sales@guerrilla-rf.com
Revision Date: 09/09/19
7
GRF2501-W
Released
High Gain, Ultra-LNA
802.11ac: 4.9—6.0 GHz
GRF2501-W Evaluation Board Measured Data: 3.3V/18mA
Guerrilla RF Proprietary Information. Guerrilla RFTM and the composite logo of Guerrilla RFTM are trademarks of Guerrilla RF, Inc. ©2014 Guerrilla RF, Inc. All rights reserved.
Please contact Guerrilla RF at (+1) 336-510-7840 or sales@guerrilla-rf.com
Revision Date: 09/09/19
8
GRF2501-W
Released
High Gain, Ultra-LNA
802.11ac: 4.9—6.0 GHz
GRF2501-W Evaluation Board S-Pars:
Guerrilla RF Proprietary Information. Guerrilla RFTM and the composite logo of Guerrilla RFTM are trademarks of Guerrilla RF, Inc. ©2014 Guerrilla RF, Inc. All rights reserved.
Please contact Guerrilla RF at (+1) 336-510-7840 or sales@guerrilla-rf.com
Revision Date: 09/09/19
9
GRF2501-W
Released
High Gain, Ultra-LNA
802.11ac: 4.9—6.0 GHz
GRF2501-W Evaluation Board Mu/Mu Prime Stability Factors:
Note: Mu >= 1.0 implies unconditional stability
Note: Mu prime >= 1.0 implies unconditional stability
Guerrilla RF Proprietary Information. Guerrilla RFTM and the composite logo of Guerrilla RFTM are trademarks of Guerrilla RF, Inc. ©2014 Guerrilla RF, Inc. All rights reserved.
Please contact Guerrilla RF at (+1) 336-510-7840 or sales@guerrilla-rf.com
Revision Date: 09/09/19
10
GRF2501-W
Released
High Gain, Ultra-LNA
802.11ac: 4.9—6.0 GHz
GRF2501-W Application Schematic
GRF2501-W Evaluation Board Assembly Diagram
Guerrilla RF Proprietary Information. Guerrilla RFTM and the composite logo of Guerrilla RFTM are trademarks of Guerrilla RF, Inc. ©2014 Guerrilla RF, Inc. All rights reserved.
Please contact Guerrilla RF at (+1) 336-510-7840 or sales@guerrilla-rf.com
Revision Date: 09/09/19
11
GRF2501-W
Released
High Gain, Ultra-LNA
802.11ac: 4.9—6.0 GHz
GRF2501-W Standard Evaluation Board BOM: (5.1 to 5.9 GHz Tune)
Component
Type
Manufacturer
Family
Value
Package Size
Subsꢀtuꢀon
M5
M7
Resistor: 5%
Capacitor
Various
Murata
Murata
Murata
—
1k Ohm
0.1 uF
0201
0201
0201
0201
ok
ok
ok
ok
GRM
M8
Ferrite Bead
Capacitor
BLM15AG121SN1D 120 Ohm
GJM 1.0 pF
M9 (See note)
Evaluaꢀon Board:
GRF25XX_RevB
Note: Place M9 close to pin 6. The posiꢀon of this component affects the device matching.
GRF2501-W Bias R Selection Table: Vdd: 3.3V
Guerrilla RF Proprietary Information. Guerrilla RFTM and the composite logo of Guerrilla RFTM are trademarks of Guerrilla RF, Inc. ©2014 Guerrilla RF, Inc. All rights reserved.
Please contact Guerrilla RF at (+1) 336-510-7840 or sales@guerrilla-rf.com
Revision Date: 09/09/19
12
GRF2501-W
Released
High Gain, Ultra-LNA
802.11ac: 4.9—6.0 GHz
GRF2501-W Bias R Selection Table: Vdd: 3.0 volts
GRF2501-W Bias R Selection Table: Vdd: 5.0 volts
Guerrilla RF Proprietary Information. Guerrilla RFTM and the composite logo of Guerrilla RFTM are trademarks of Guerrilla RF, Inc. ©2014 Guerrilla RF, Inc. All rights reserved.
Please contact Guerrilla RF at (+1) 336-510-7840 or sales@guerrilla-rf.com
Revision Date: 09/09/19
13
GRF2501-W
Released
High Gain, Ultra-LNA
802.11ac: 4.9—6.0 GHz
1.5 mm DFN-6 Suggested PCB Footprint (Top View)
1.5 mm DFN-6 Package Dimensions
Guerrilla RF Proprietary Information. Guerrilla RFTM and the composite logo of Guerrilla RFTM are trademarks of Guerrilla RF, Inc. ©2014 Guerrilla RF, Inc. All rights reserved.
Please contact Guerrilla RF at (+1) 336-510-7840 or sales@guerrilla-rf.com
Revision Date: 09/09/19
14
GRF2501-W
Released
High Gain, Ultra-LNA
802.11ac: 4.9—6.0 GHz
Tape and Reel Information:
Guerrilla RF’s Tape and Reel specification complies with the Electronics Industries Association (EIA)
standards for ‘Embossed Carrier Tape of Surface Mount Components for Automatic Handling”. Reference
EIA-481. See the table on the following page for Tape and Reel specifications along with units per reel.
Devices are loaded with pins down into the carrier pocket with protective cover tape, wound into a plastic
reel. Each reel will be packaged in a cardboard box. There will be product labels on the reel, the protec-
tive ESD bag and the outside surface of the box.
Tape and Reel Packaging with Reel Diameter Noted (D)
Carrier Tape Width (W), Pitch (P), Feed Direction and Pin 1 Quadrant Information
Guerrilla RF Proprietary Information. Guerrilla RFTM and the composite logo of Guerrilla RFTM are trademarks of Guerrilla RF, Inc. ©2014 Guerrilla RF, Inc. All rights reserved.
Please contact Guerrilla RF at (+1) 336-510-7840 or sales@guerrilla-rf.com
Revision Date: 09/09/19
15
GRF2501-W
Released
High Gain, Ultra-LNA
802.11ac: 4.9—6.0 GHz
Tape and Reel Specification and Device Package Information Table
Package
Carrier Tape
Reel
Type
Dimensions
(mm)
Leads
Weight
(mg)
Width (W) Pocket Pitch (P) Pin 1 Quad- Diameter (D)
Units per
Reel
rant
(mm)
(mm)
(inches)
QFN 2.0 x 2.0 x 0.50
QFN 3.0 x 3.0 x 0.85
DFN 1.5 x 1.5 x 0.45
DFN 2.0 x 2.0 x 0.75
LFM 3.5 x 3.5 x 0.75
12
16
6
7
24
4
8
4
Q1
7
2500
1500
2500
2500
1500
12
8
8
4
4
8
Q1
Q1
Q1
Q2
7
7
7
7
8
12
TBD
8
See
12
note
LFM 4.0 x 4.0 x 0.75
See
TBD
12
8
Q2
7
1500
note
Note: Lead count may vary. Reference applicable product data sheet
Guerrilla RF Proprietary Information. Guerrilla RFTM and the composite logo of Guerrilla RFTM are trademarks of Guerrilla RF, Inc. ©2014 Guerrilla RF, Inc. All rights reserved.
Please contact Guerrilla RF at (+1) 336-510-7840 or sales@guerrilla-rf.com
Revision Date: 09/09/19
16
GRF2501-W
Released
High Gain, Ultra-LNA
802.11ac: 4.9—6.0 GHz
Data Sheet Release Status:
Advance
Notes
S-parameter and NF data based on EM simulations for the fully packaged device
using foundry supplied transistor s-parameters. Linearity estimates based on de-
vice size, bias condition and experience with related devices.
All data based on evaluation board measurements in the Guerrilla RF Applications
Lab.
Preliminary
Released
All data based on device qualification data. Typically, this data is nearly identical to
the data found in the preliminary version. Max and min values for key RF parame-
ters are included.
Informaꢀon in this datasheet is specific to the Guerrilla RF, Inc. (“Guerrilla RF”) product idenꢀfied.
This datasheet, including the informaꢀon contained in it, is provided by Guerrilla RF as a service to its customers and may be used for informaꢀonal purposes
only by the customer. Guerrilla RF assumes no responsibility for errors or omissions on this datasheet or the informaꢀon contained herein. Informaꢀon provided
is believed to be accurate and reliable, however, no responsibility is assumed by Guerrilla RF for its use, nor for any infringement of patents, or other rights of
third parꢀes, resulꢀng from its use. Guerrilla RF assumes no liability for any datasheet, datasheet informaꢀon, materials, products, product informaꢀon, or other
informaꢀon provided hereunder, including the sale, distribuꢀon, reproducꢀon or use of Guerrilla RF products, informaꢀon or materials.
No license, whether express, implied, by estoppel, by implicaꢀon or otherwise is granted by this datasheet for any intellectual property of Guerrilla RF, or any
third party, including without limitaꢀon, patents, patent rights, copyrights, trademarks and trade secrets. All rights are reserved by Guerrilla RF.
All informaꢀon herein, products, product informaꢀon, datasheets, and datasheet informaꢀon are subject to change and availability without noꢀce. Guerrilla RF
reserves the right to change component circuitry, recommended applicaꢀon circuitry and specificaꢀons at any ꢀme without prior noꢀce. Guerrilla RF may further
change its datasheet, product informaꢀon, documentaꢀon, products, services, specificaꢀons or product descripꢀons at any ꢀme, without noꢀce. Guerrilla RF
makes no commitment to update any materials or informaꢀon and shall have no responsibility whatsoever for conflicts, incompaꢀbiliꢀes, or other difficulꢀes
arising from any future changes.
GUERRILLA RF INFORMATION, PRODUCTS, PRODUCT INFORMATION, DATASHEETS AND DATASHEET INFORMATION ARE PROVIDED “AS IS” AND WITHOUT WAR-
RANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY,
PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. GUER-
RILLA RF DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATE-
RIALS. GUERRILLA RF SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSE-
QUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFOR-
MATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Customers are solely responsible for their use of Guerrilla RF products in the Customer’s products and applicaꢀons or in ways which deviate from Guerrilla RF’s
published specificaꢀons, either intenꢀonally or as a result of design defects, errors, or operaꢀon of products outside of published parameters or design specifica-
ꢀons. Customers should include design and operaꢀng safeguards to minimize these and other risks. Guerrilla RF assumes no liability or responsibility for applica-
ꢀons assistance, customer product design, or damage to any equipment resulꢀng from the use of Guerrilla RF products outside of stated published specificaꢀons
or parameters.
Guerrilla RF Proprietary Information. Guerrilla RFTM and the composite logo of Guerrilla RFTM are trademarks of Guerrilla RF, Inc. ©2014 Guerrilla RF, Inc. All rights reserved.
Please contact Guerrilla RF at (+1) 336-510-7840 or sales@guerrilla-rf.com
Revision Date: 09/09/19
17
相关型号:
GRF300
SURFACE MOUNT, HIGH REPEATABILITY, SIGNAL INTEGRITY TO 10Gpbs BROADBAND TO-5 RELAYS DPDT
TELEDYNE
GRF303
SURFACE MOUNT, HIGH REPEATABILITY, SIGNAL INTEGRITY TO 10Gpbs BROADBAND TO-5 RELAYS DPDT
TELEDYNE
GRF303-5
SURFACE MOUNT, HIGH REPEATABILITY, SIGNAL INTEGRITY TO 10Gpbs BROADBAND TO-5 RELAYS DPDT
TELEDYNE
©2020 ICPDF网 联系我们和版权申明