GRF4200 [GUERRILLA]

High Gain, Linear Driver Tuning Range: 0.1â3.8 GHz;


型号：	GRF4200
厂家：	Guerrilla RF
描述：	High Gain, Linear Driver Tuning Range: 0.1â3.8 GHz
文件：	总13页 (文件大小：935K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

GRF4200

Preliminary

High Gain, Linear Driver

Tuning Range: 0.1—3.8 GHz

Product Description

GRF4200 is a linear gain block designed for small cell,

wireless infrastructure and other high performance ap-

plications. It exhibits outstanding linearity, gain and effi-

ciency over 1700 to 2000 MHz with a single match.

The device is operated from a supply voltage (VCC) of 2.7

to 5.0 V with a selectable ICCQ range of 5 to 40 mA for

optimal efficiency and linearity.

Features

GRF4200 requires simple external matching to yield

high performance over fractional bandwidths of 10 to

15%.

Reference: 5V/35mA/1.9 GHz

• EVB NF: 4.0 dB

Consult with the GRF applications engineering team for

custom tuning/evaluation board data. Packaged device

s-parameters are available on the website landing page.

• Gain: 21.5 dB

• OP1dB: 18.0 dBm

• OIP3: 35.5 dBm

• Outstanding Low Current Performance

• Flexible Bias Voltage and Current

• Internally Matched to 50Ω

• Process: InGaP HBT

Applications

• Linear Driver Amplifier

• Small Cells and Cellular Repeaters

• Distributed Antenna Systems

• VHF and UHF Radios

• ISM Radios

Please contact Guerrilla RF at (+1) 336-510-7840 or sales@guerrilla-rf.com

Revision Date: 10/01/19

GRF4200

Preliminary

High Gain, Linear Driver

Tuning Range: 0.1—3.8 GHz

Absolute Ratings:

Parameter

Symbol

Min.

Max.

6.0

Unit

Supply Voltage

VCC

RF Input Power: (Load VSWR < 2:1; V_C: 5.0 volts)

Operating Temperature (Package Heat Sink)

P_{IN MAX}

T_AMB

dBm

°C

-40

105

150

Maximum Channel Temperature

(MTTF > 10^6 Hours)

TMAX

°C

Maximum Dissipated Power

Electrostatic Discharge:

Charged Device Model:

Human Body Model:

Storage:

P_{DISS MAX}

250

CDM

HBM

TBD

Storage Temperature

T_STG

-65

150

°C

Moisture Sensitivity Level

MSL

Cauꢀon! ESD Sensiꢀve Device

Exceeding Absolute Maximum Raꢀng condiꢀons may cause permanent damage to the device.

Note: For manufacturing informaꢀon, see the Guerrilla-RF.com website for the following docu-

ment located on the GRF4200 landing page: Manufacturing Note—MN-001 Product Tape and

Reel, Solderability and Package Outline Speciﬁcaꢀon.

Link to manufacturing note

Please contact Guerrilla RF at (+1) 336-510-7840 or sales@guerrilla-rf.com

Revision Date: 10/01/19

GRF4200

Preliminary

High Gain, Linear Driver

Tuning Range: 0.1—3.8 GHz

Pin Out (Top View)

Pin Assignments:

Name

Description

Enable Voltage Input

Note

VENABLE and series resistor set ICCQ. VENABLE < =0.2 volts disables device. On-

VENABLE

die pull-down resistor will turn the part off if this node is allowed to float.

No Connect or Ground

LNA RF input

No internal connection to die

RF_In

RF_Out

Internally matched 50Ω. An external DC blocking cap must be used.

LNA RF output

Internally matched 50Ω. V_CCmust be applied through a choke to this pin

No Connect or Ground

Ground

No internal connection to die

Provides DC and RF ground for LNA, as well as thermal heat sink. Recom-

mend multiple 8 mil vias beneath the package for optimal RF and thermal

performance. Refer to evaluation board top layer graphic on schematic

page.

GND

PKG

BASE

Please contact Guerrilla RF at (+1) 336-510-7840 or sales@guerrilla-rf.com

Revision Date: 10/01/19

GRF4200

Preliminary

High Gain, Linear Driver

Tuning Range: 0.1—3.8 GHz

Nominal Operating Parameters:

Specification

Typ.

Parameter

Symbol

Unit

Condition

Min.

Max.

Test Frequency

Gain

F_TEST

S21

1900

21.5

4.0

MHz

V_CC= 5.0 V, T_A= 25°C

Evaluation Board Noise Figure

Output 3rd Order Intercept

Output 1dB Compression Point

Switching Rise Time

OIP3

OP1dB

T_RISE

T_FALL

I_DD

35.5

18.0

TBD

dBm

0.0 dBm P_OUTper tone at 2 MHz

Spacing (1899 and 1901 MHz)

Switching Fall Time

Supply Current

Enable Current

IENABLE

5.0

Disabled Mode

Leakage Current

ILEAKAGE

TBD

VDD: 5.0V; VENABLE: 0.0V

Thermal Data

Thermal Resistance: (Infra-Red Scan)

TBD

ᵒC/W On standard Evaluation Board

jc

Channel Temperature @ +85 C Reference

(Package heat sink)

TCHANNEL

ᵒC

VCC: 5.0 V; ICCQ: 35 mA; No RF;

PDISS: 175 mW

Note: MTTF >10^6 hours for TCHANNEL < =170 degrees C.

Please contact Guerrilla RF at (+1) 336-510-7840 or sales@guerrilla-rf.com

Revision Date: 10/01/19

GRF4200

Preliminary

High Gain, Linear Driver

Tuning Range: 0.1—3.8 GHz

GRF4200 Evaluation Board Data:

Please contact Guerrilla RF at (+1) 336-510-7840 or sales@guerrilla-rf.com

Revision Date: 10/01/19

GRF4200

Preliminary

High Gain, Linear Driver

Tuning Range: 0.1—3.8 GHz

GRF4200 Evaluation Board Data:

Please contact Guerrilla RF at (+1) 336-510-7840 or sales@guerrilla-rf.com

Revision Date: 10/01/19

GRF4200

Preliminary

High Gain, Linear Driver

Tuning Range: 0.1—3.8 GHz

GRF4200 Evaluation Board S-Pars and Stability Mu Factor: (1.7 to 2.0 GHz Match)

Note: Mu factor >= 1.0 implies unconditional stability.

Please contact Guerrilla RF at (+1) 336-510-7840 or sales@guerrilla-rf.com

Revision Date: 10/01/19

GRF4200

Preliminary

High Gain, Linear Driver

Tuning Range: 0.1—3.8 GHz

GRF4200 Application Schematic

GRF4200 Evaluation Board Assembly Diagram

Please contact Guerrilla RF at (+1) 336-510-7840 or sales@guerrilla-rf.com

Revision Date: 10/01/19

GRF4200

Preliminary

High Gain, Linear Driver

Tuning Range: 0.1—3.8 GHz

GRF4200 Standard Evaluation Board BOM: (1.7 to 2.0 GHz Tune)

Component

Type

Manufacturer

Family

Value

Package Size

Subsꢀtuꢀon

Inductor

Capacitor

Resistor

Murata

Various

Murata

LQG

GJM

4.3 nH

7.5 pF

0402

1.0 pF

M5 (See curves)

Sets Iddq

0.1 uF

Capacitor

Inductor

Capacitor

GRM

LQG

GJM

100 pF

3.9 nH

1.0 pF

M10

M12

GRF4200 Bias Resistor Selection Chart (TBD)

Please contact Guerrilla RF at (+1) 336-510-7840 or sales@guerrilla-rf.com

Revision Date: 10/01/19

GRF4200

Preliminary

High Gain, Linear Driver

Tuning Range: 0.1—3.8 GHz

1.5 mm DFN-6 Suggested PCB Footprint (Top View)

1.5 mm DFN-6 Package Dimensions

Please contact Guerrilla RF at (+1) 336-510-7840 or sales@guerrilla-rf.com

Revision Date: 10/01/19

GRF4200

Preliminary

High Gain, Linear Driver

Tuning Range: 0.1—3.8 GHz

Tape and Reel Information:

Guerrilla RF’s Tape and Reel specification complies with the Electronics Industries Association (EIA)

standards for ‘Embossed Carrier Tape of Surface Mount Components for Automatic Handling”. Reference

EIA-481. See the table on the following page for Tape and Reel specifications along with units per reel.

Devices are loaded with pins down into the carrier pocket with protective cover tape, wound into a plastic

reel. Each reel will be packaged in a cardboard box. There will be product labels on the reel, the protec-

tive ESD bag and the outside surface of the box.

Tape and Reel Packaging with Reel Diameter Noted (D)

Carrier Tape Width (W), Pitch (P), Feed Direction and Pin 1 Quadrant Information

Please contact Guerrilla RF at (+1) 336-510-7840 or sales@guerrilla-rf.com

Revision Date: 10/01/19

GRF4200

Preliminary

High Gain, Linear Driver

Tuning Range: 0.1—3.8 GHz

Tape and Reel Specification and Device Package Information Table

Package

Carrier Tape

Reel

Type

Dimensions

(mm)

Leads

Weight

(mg)

Width (W) Pocket Pitch (P) Pin 1 Quad- Diameter (D)

Units per

Reel

rant

(mm)

(inches)

QFN 2.0 x 2.0 x 0.50

QFN 3.0 x 3.0 x 0.85

DFN 1.5 x 1.5 x 0.45

DFN 2.0 x 2.0 x 0.75

LFM 3.5 x 3.5 x 0.75

2500

1500

2500

1500

TBD

See

note

LFM 4.0 x 4.0 x 0.75

See

TBD

1500

note

Note: Lead count may vary. Reference applicable product data sheet

Please contact Guerrilla RF at (+1) 336-510-7840 or sales@guerrilla-rf.com

Revision Date: 10/01/19

GRF4200

Preliminary

High Gain, Linear Driver

Tuning Range: 0.1—3.8 GHz

Data Sheet Release Status:

Advance

Notes

S-parameter and NF data based on EM simulations for the fully packaged device

using foundry supplied transistor s-parameters. Linearity estimates based on de-

vice size, bias condition and experience with related devices.

All data based on evaluation board measurements in the Guerrilla RF Applications

Lab.

Preliminary

Released

All data based on device qualification data. Typically, this data is nearly identical to

the data found in the preliminary version. Max and min values for key RF parame-

ters are included.

Informaꢀon in this datasheet is speciﬁc to the Guerrilla RF, Inc. (“Guerrilla RF”) product idenꢀﬁed.

This datasheet, including the informaꢀon contained in it, is provided by Guerrilla RF as a service to its customers and may be used for informaꢀonal purposes

only by the customer. Guerrilla RF assumes no responsibility for errors or omissions on this datasheet or the informaꢀon contained herein. Informaꢀon provided

is believed to be accurate and reliable, however, no responsibility is assumed by Guerrilla RF for its use, nor for any infringement of patents, or other rights of

third parꢀes, resulꢀng from its use. Guerrilla RF assumes no liability for any datasheet, datasheet informaꢀon, materials, products, product informaꢀon, or other

informaꢀon provided hereunder, including the sale, distribuꢀon, reproducꢀon or use of Guerrilla RF products, informaꢀon or materials.

No license, whether express, implied, by estoppel, by implicaꢀon or otherwise is granted by this datasheet for any intellectual property of Guerrilla RF, or any

third party, including without limitaꢀon, patents, patent rights, copyrights, trademarks and trade secrets. All rights are reserved by Guerrilla RF.

All informaꢀon herein, products, product informaꢀon, datasheets, and datasheet informaꢀon are subject to change and availability without noꢀce. Guerrilla RF

reserves the right to change component circuitry, recommended applicaꢀon circuitry and speciﬁcaꢀons at any ꢀme without prior noꢀce. Guerrilla RF may further

change its datasheet, product informaꢀon, documentaꢀon, products, services, speciﬁcaꢀons or product descripꢀons at any ꢀme, without noꢀce. Guerrilla RF

makes no commitment to update any materials or informaꢀon and shall have no responsibility whatsoever for conﬂicts, incompaꢀbiliꢀes, or other diﬃculꢀes

arising from any future changes.

GUERRILLA RF INFORMATION, PRODUCTS, PRODUCT INFORMATION, DATASHEETS AND DATASHEET INFORMATION ARE PROVIDED “AS IS” AND WITHOUT WAR-

RANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY,

PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. GUER-

RILLA RF DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATE-

RIALS. GUERRILLA RF SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSE-

QUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFOR-

MATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Customers are solely responsible for their use of Guerrilla RF products in the Customer’s products and applicaꢀons or in ways which deviate from Guerrilla RF’s

published speciﬁcaꢀons, either intenꢀonally or as a result of design defects, errors, or operaꢀon of products outside of published parameters or design speciﬁca-

ꢀons. Customers should include design and operaꢀng safeguards to minimize these and other risks. Guerrilla RF assumes no liability or responsibility for applica-

ꢀons assistance, customer product design, or damage to any equipment resulꢀng from the use of Guerrilla RF products outside of stated published speciﬁcaꢀons

or parameters.

Please contact Guerrilla RF at (+1) 336-510-7840 or sales@guerrilla-rf.com

Revision Date: 10/01/19

GRF4200 [GUERRILLA]

相关型号：

GRF5020

GRF5109

GRF5110

GRF5507

GRF5508

GRF5510

GRF5511

GRF5517

GRF5518

GRF5519

GRF5521

GRF5526